It connects to M.2 NVMe SSD. can make full use of the low delay characteristic of PCIE to improve the speed of SSD and increase the number of M.2 interfaces of host. | Supports PCIe M.2 SSDs (NVMe and AHCI): 2230, 2242, 2260 and 2280 drives. | Compatible with PCIe 3.0 motherboards and backward compatible with PCIe 2.0 and PCIe 1.0.NOT support hot swaping. | Full height and low profile bracket included.

Data Rate: 2.5Gb/s (Attention: Please make sure your switch or router is compatible with negotiating at 2.5Gbps at the port before placing order. ) | Interface: RJ-45 | Reach: up to 100 meters transmission over CAT.5e

SlimSAS SFF-8654 to SFF-8654 cable, 8i configurations, supports data rates up to 24Gbps, 85 Ohm impedance, 32AWG, (12#) straight to right exit types cable plug. | Designed for unshielded, internal or external I/O connectors. 0.60mm pitch interconnect system offers superior signal integrity performance. | Compliant with T10/ Serial Attached SCSI standard, extended to support PCIe 4.0. Applicable for servers/ PC, data storage, workstation, datacenter, devices. | Ribbon cable interface and assembly options provide low profiles and design flexibility. | If the cable you need is not above, please contact us for your design.

SlimSAS SFF-8654 to SFF-8654 cable, 8i configurations, supports data rates up to 24Gbps, 100 Ohm impedance, 32AWG, (22#) right exit types cable plug. | Designed for unshielded, internal or external I/O connectors. High density 74pin offers superior signal integrity performance. | Compliant with T10/ Serial Attached SCSI (SAS-4) standard, extended to support SAS 4.0. Applicable for servers/ PC, data storage, workstation, datacenter, devices. | Ribbon cable interface and assembly options provide low profiles and design flexibility. | If the cable you need is not above, please contact us for your design.

SlimSAS SFF-8654 to SFF-8654 cable, 8i configurations, supports data rates up to 24Gbps, 100 Ohm impedance, 32AWG, (11#) straight types cable plug. | Designed for unshielded, internal I/O connectors. High density 74pin offers superior signal integrity performance. | Compliant with T10/ Serial Attached SCSI (SAS-4) standard, extended to support SAS 4.0. Applicable for servers/ PC, data storage, workstation, datacenter, devices. | Ribbon cable interface and assembly options provide low profiles and design flexibility. | If the cable you need is not above, please contact us for your design.

SlimSAS SFF-8654 to SFF-8654 cable, 8i configurations, supports data rates up to 24Gbps, 100 Ohm impedance, 32AWG, (11#) straight types cable plug. | Designed for unshielded, internal I/O connectors. High density 74pin offers superior signal integrity performance. | Compliant with T10/ Serial Attached SCSI (SAS-4) standard, extended to support SAS 4.0. Applicable for servers/ PC, data storage, workstation, datacenter, devices. | Ribbon cable interface and assembly options provide low profiles and design flexibility. | If the cable you need is not above, please contact us for your design.

SlimSAS SFF-8654 to SFF-8654 cable, 8i configurations, supports data rates up to 24Gbps, 100 Ohm impedance, 32AWG, (11#) straight types cable plug. | Designed for unshielded, internal I/O connectors. High density 74pin offers superior signal integrity performance. | Compliant with T10/ Serial Attached SCSI (SAS-4) standard, extended to support SAS 4.0. Applicable for servers/ PC, data storage, workstation, datacenter, devices. | Ribbon cable interface and assembly options provide low profiles and design flexibility. | If the cable you need is not above, please contact us for your design.

SlimSAS SFF-8654 to SFF-8654 cable, 8i configurations, supports data rates up to 24Gbps, 85 Ohm impedance, 32AWG, (11#) straight types cable plug. | Designed for unshielded, internal I/O connectors. High density 74pin offers superior signal integrity performance. | Compliant with T10/ Serial Attached SCSI standard, extended to support PCIe 4.0. Applicable for servers/ PC, data storage, workstation, datacenter, devices. | Ribbon cable interface and assembly options provide low profiles and design flexibility. | If the cable you need is not above, please contact us for your design.

25GbE SFP28 to SFP28 25GBASE-AOC Active Optical Cable SFP+ assembly, 10 meter. | Widely compatible with Cisco SFP-25G-AOC10M, Ubiquiti, Netgear, D-link, Supermicro, Mikrotik, ZTE, Quanta, Solarflare, PaloAlto, F5, etc devices. (Coding as Cisco SFP-25G-AOC10M) | 25G SFP28 AOC is the next logical migration from 10G to reduce the cost per Gbit/sec and provides 2.5 times the bandwidth of 10G using in the same SFP form factor. It is ideal for datacenter top of rack, wireless backhaul and enterprise interconnect applications. | In 10Gtek's Signal Integrity Lab, we 100% passed TDR & VNA tested. Each AOC Cable is individually tested on switches before delivery. | Backed by 10Gtek 30 Days Free-returned, 1-Year Free Warranty and Lifetime Technology Support. 10Gtek offer more compatible options, if your brands not listed above, pls contact us.

Data Rate: 10Gb/s, 25GGb/s multi-rate | Interface: Dual LC connectors | Reach1: up to 70 meters OM3 MMF; Reach2: up to 100 meters OM4 MMF | Fiber Type: Dual LC OM3/OM4 multi-mode fiber | Compatible with Cisco SFP-25G-SR-S

Compatible for Cisco QSFP-H40G-CU50CM, Meraki MA-CBL-40G-50CM, Mikrotik, Open Switch Devices | QSFP+ to QSFP+ 40GbE DAC Direct Attach Copper Twinax Cable, 0.5-meter | QSFP+ DAC, 40G DAC, QSFP+ to QSFP+ DAC, QSFP+ Direct Attach Copper Twinax Cable | 100% Compatible with Cisco. 10Gtek owns Compatibility LAB to meet the coding requirements for various brands of switches and routers. Each AOC Cable is individually tested before delivery. | 10Gtek offer more compatible options, if your brands not listed above, pls contact us.

Compatible for Ubiquiti, Dell Force10 CBL-QSFP-40GE-PASS-0.5M, Supermicro, Mikrotik, Open Switch Devices | QSFP+ to QSFP+ 40GbE DAC Direct Attach Copper Twinax Cable, 0.5-meter | QSFP+ DAC, 40G DAC, QSFP+ to QSFP+ DAC, QSFP+ Direct Attach Copper Twinax Cable | 100% Compatible with Dell Force10. 10Gtek owns Compatibility LAB to meet the coding requirements for various brands of switches and routers. Each DAC Cable is individually tested before delivery. | 10Gtek offer more compatible options, if your brands not listed above, pls contact us.

40GbE QSFP+ to 4xSFP+ DAC Direct Attach Copper Twinax Breakout Cable, Passive, 2-Meter(6.5ft), 30AWG | Widely compatible with Cisco QSFP-4SFP10G-CU2M Devices, and other open switch Devices | 40G QSFP+ to 4xSFP+ Cable can connect 40 Gigabit switch, router, server, NIC, or other fiber optic equipments with QSFP+ ports to 10 Gigabit equipments with SFP+ port for Network Attached Storage, Storage Area Network and High Performance Computing | In 10Gtek's Signal Integrity Lab, we 100% passed TDR & VNA tested. And each DAC Cable is individually tested on switches before delivery | 10Gtek offer more compatible options, if your brands not listed above, pls contact us.

Data Rate: 10G; | Interface: RJ-45; | Reach: up to 80 meters over CAT.6a/CAT.7/CAT.8; | Wide Compatibility - for Cisco, Fortinet, Ubiquiti, Netgear, D-Link, TP-Link, Linksys, Broadcom, Edge-core, EMC, F5, Meraki, Norkia, QTC, Supermicro, and Other Open Switches; | Please kindly note that this particular module is not compatible with HP Aruba.

Work with 10G SFP optic ports of Ubiquiti equipment. | 10GBASE-BIDI Bidirectional sfp+ Optic, up to 20km over single LC. | SFP+ Bidi Transceiver, 10Gb/s SFP+ Bidi, Single LC connector,Wave length: Up: TX1270nm/RX1330nm; Down: TX1330nm/RX1270nm, 10~20km. | 100% Compatible with Ubiquiti. 10Gtek owns Compatibility LAB to meet the coding requirements for various brands of switches and routers. Each transceiver is individually tested before delivery.

10GBASE-BIDI Bidirectional SFP+ to single LC Optical transceiver module, Single Mode, Wave length: Up: TX1270nm/RX1330nm; Down: TX1330nm/RX1270nm, DDM, up to 20km over single LC. | Wide Compatibility - Compatible for Cisco SFP-10G-BX20D-I/SFP-10G-BX20U-I, Ubiquiti UniFi UACC-OM-SM-10G-S-2, Mikrotik and Other Open Switches. It is widely used in fiber, switches, routers, NIC,server or other fiber optic equipments with 10G SFP+ ports for plug and play, support fully hot-pluggable. | 100% Usable - In 10Gtek's Signal Integrity Lab, we 100% passed tested. Each transceiver is individually tested on switches before delivery. | Superior DDM Function - DDM allows you to monitor the critical information concerning the status of the transmitted and received signals of the transceivers in real-time to find out some potential problems. | Perfect After-sales Service - Backed by 10Gtek 30 Days Free-returned, 3-Year Free Warranty and Lifetime Technology Support. 10Gtek is a manufacturer of transceiver, customized service is available

Optical Port: 100Mbps, Single SC singlemode fiber, support 100M Ethernet. | RJ45 Port: CAT5E/CAT6 10M/100M, Full Duplex or Half Duplex; Supports MDI/MDI-X auto crossover. | Complies with IEEE IEEE 802.3/802.3u/802.3af. | Status LED's for TX, FX LINK/ACT, POWER, FDX to easily monitor network status. | Supports wide temperature range from 0°C to 60°C.

Fiber Port: 1.25G, SC, 1310-nm | Fiber Type: SMF, Single SC | RJ-45 Port: 1 port 10M/100M/1000Mbps, full/half duplex auto-negotiation, MDI/MDIX auto-crossover | Cable Type: UTP/STP Cat.5e for 100 meters | Power Supply: 5V-1A, UL Certified

Support HDMI 1.4a signal, 4Kx2K, 3D video. | 2pcs free SFP+ LR Transceiver included. | SFP+ slot: 300-m to 80-km 10Gb/s SFP+ Module Optional. | The DVD side should be linked to signal source and TV side should be linked to display device; reverse usage forbidden. | RAW signal transmission, uncompressed audio and non-delay.

Fiber Port: 1.25G, SC, 1310-nm | Fiber Type: MMF, Dual SC | RJ-45 Port: 1 port 10M/100M/1000Mbps, full/half duplex auto-negotiation, MDI/MDIX auto-crossover | Cable Type: UTP/STP Cat.5e for 100 meters | Power Supply: 5V-1A, UL Certified

Fiber Port: 1.25G, SC, 1310-nm | Fiber Type: SMF, Dual SC | RJ-45 Port: 1 port 10M/100M/1000Mbps, full/half duplex auto-negotiation, MDI/MDIX auto-crossover | Cable Type: UTP/STP Cat.5e for 100 meters | Power Supply: 5V-1A, UL Certified

[Convert Fiber to Ethernet] Media Converters provide you a cost-effective, strong anti-interference ability and stable data transmission solution for network extensions (up to 20km with singlemode fiber). Designed to convert 1000BASE-Tx copper to 1000Base-LX fiber media or vice versa. | [Smart Management] Single-mode Dual LC fiber Optical Port, 1.25Gbps, 1310nm wavelength, support Gigabit Ethernet, extend fiber distance to 20km; RJ45 Port: 10M/100M/1000M, supports Full/Half Duplex auto-negotiation and MDI/MDIX auto-crossover. | [High-quality and Widely Compatibility] Equiped with RTL8213B chip to ensure stability and Ultra-low time-delay data transmission. Complies with IEEE 802.3/802.3u/802.3z/802.3ab, 10/100/1000Base-TX/FX. Supports jumbo frame size 9K byte. | [Plug and Play] Modulization configuration design, support hot-swappable, plug and play. LED indicators for TX, FX LINK/ACT, POWER, FDX can dynamic feedback link connection state and fault detection to easily monitor network status. Operating Temperature: 0°C to 60°C. | [What You Get] 2x SFP Gigabit Ethernet Media Converter, 2x 1000Base-LX module, 2x DC Power Adapter, 2x User's Manuals. 30-day Money-Back guarantee with 1 Year warranty and lifetime tech support.

Data Rate: 10G | Wavelength: 850-nm; Reach: up to 300m | Fiber Type: Dual LC OM3/OM4 multi-mode fiber | Operating temperature range: -40°C ~ +80°C

Internal Mini SAS HD SFF-8643 to SFF-8643 Cable, 12G, 100-Ohm, Straight to Right Angle, 0.5-m | Up to 12Gbps data rates | Impedance=100 Ohms | If the cable you need is not above, please contact us for your design.

【SFF-8643 Connectors】Both ends of the cable are equipped with SFF-8643 connectors, which are 36-pin miniature SAS connectors. They support the latest generation SAS protocols and are commonly used in enterprise-level storage systems, servers, and backplanes for connecting SAS expanders, RAID controllers, or SAS/SATA drives. | 【12G Data Transfer Rate】The cable is rated for 12Gbps, meaning it supports SAS-3 specifications, capable of transmitting data at speeds up to 12 Gigabits per second, allowing for faster data access and improved system performance. | 【100-Ohm Impedance】The cable is designed with an impedance of 100 Ohms to ensure optimal signal integrity and minimize signal loss over the length of the cable, thus meeting the stringent requirements for high-speed SAS communications. | 【Straight to Right Angle Orientation】One end of the cable features a straight SFF-8643 connector while the other end has a right-angle connector. This design provides flexibility for tight spaces within server chassis or rack-mounted equipment where there might be limitations on the directionality of connections. | 【Mini SAS HD SFF-8643 to SFF-8643】This cable is engineered for high-performance, next-generation SAS environments, offering robust connectivity options for high-bandwidth applications requiring reliable, low-latency data transfer between SAS devices.

The SFF-8643 connector is a compact, high-density interface for Serial Attached SCSI (SAS) and Serial ATA (SATA) devices. It supports up to 4 differential signal pairs (lanes), allowing for multiple data paths within a single connector. This makes it ideal for high-bandwidth applications like connecting SAS expanders, RAID controllers, or SAS/SATA hard drives and solid-state drives (SSDs). | The cable is rated for 12 Gigabits per second (Gbps) data transfer speed per lane, which translates to a total aggregate bandwidth of 48 Gbps (12 Gbps × 4 lanes) across the entire cable. This high throughput ensures efficient data transfer for demanding storage applications requiring fast access times and large data volumes. | The cable measures 0.3 meters (or 0.9 feet) in length, making it a short-range interconnect solution suitable for close-proximity connections within a rack, chassis, or server. Shorter cables generally exhibit better signal quality and lower latency compared to longer ones, especially at higher data rates. | The specified impedance of 100 Ohms is a critical electrical characteristic that ensures proper signal integrity and minimizes signal loss or distortion over the length of the cable. Maintaining a consistent impedance throughout the cable and matching it to the connected devices is crucial for optimal performance at high speeds. | The cable is 0.3m(0.9ft) long, excluding the connector. Please pay attention to the distance between the devices to avoid the cable being too short.

Expands to x1, x4, x8 or x16 PCI express slots, supports 3160, 3165, 7260, 7265, 8260, 8265, 9260, AX200, AX210. | PCIE X1 to M.2/NGFF (A+E Key) WiFi Bluetooth Wireless Module Adapter Card, can support PCIE WiFi and USB Bluetooth at the same time, support AMD and Intel motherboard computers. | Can support notebook M.2 wireless network card + bluetooth transfer to desktop computer using transfer card, this product is a full height baffle. | Compatible with multiple operating systems.NOT support hot swaping. | Comes with a bluetooth cable, USB 9pin female to small 4pin, black dupont cable, 30cm.

QSFP+ (SFF-8436) to SFF-8088 Cable, QSFP compatible for Cisco; | Impedance=100 Ohms; | Up to 10 Gbps transfer rate per channel; | Precision process control for minimization of pair-to-pair skew; | Fully compliant to the latest QSFP MSA (Multi-Source-Agreement) and the latest SAS3.0.

QSFP+ (SFF-8436) to SFF-8088 Cable, QSFP compatible for Cisco; | Impedance=100 Ohms; | Up to 10 Gbps transfer rate per channel; | Precision process control for minimization of pair-to-pair skew; | Fully compliant to the latest QSFP MSA (Multi-Source-Agreement) and the latest SAS3.0.

QSFP+ (SFF-8436) to SFF-8088 Cable, QSFP compatible for Cisco; | Impedance=100 Ohms; Cable length contains two end connectors. | Up to 10 Gbps transfer rate per channel; | Precision process control for minimization of pair-to-pair skew; | Fully compliant to the latest QSFP MSA (Multi-Source-Agreement) and the latest SAS3.0.

QSFP+ (SFF-8436) to SFF-8088 Cable, QSFP compatible for Cisco | Impedance=100 Ohms | Up to 10 Gbps transfer rate per channel | Precision process control for minimization of pair-to-pair skew | Fully compliant to the latest QSFP MSA (Multi-Source-Agreement) and the latest SAS3.0

Protect QSFP Port from being exposed and keep your network equipment safe from dust, debris and moisture, extending the lifespan of your device. | Fit for any standard QSFP/LAN slot of your open ports of switches, routers , media converters and more. | Made of high quality durable and reliable PVC material, these anti-dust QSFP caps exhibit a high level of resistance to harsh environmental factors and retain their shape and flexibility even after frequent use. | Designed with a pull-out tab, easy to insert and remove, fit snugly and stay in place. | What You Get: 14*11*23mm / 0.55 x 0.43 x 0.9 inches (L*W*H) RJ45 Dust Dust Covers * 50pcs , Color : Black

5 pin terminal option for RS-485 (T+,T-), RS-422(T+,T-,R+,R-,GND） | RS-485/422 up to 1.2-km@120Kbps | 155M Fiber, single SC, SMF, 1310-nm, 20-km | Support 32 node. The interface provides 1500W surge protection, 15KV static protection | Power Adapter: 5V-1A, UL Certified

7 pin terminal option for RS-485(T+,T-), RS-422(T+,T-,R+,R-), RS-232(TX,RX,GND) | RS-232 up to 15-meter @120Kbps, RS-485/422 up to 1.2-km @120Kbps | 155M Fiber, single SC, SMF, 1310-nm, 20-km | Support 32 node. The interface provides 1500W surge protection, 15KV static protection | Power Adapter: 5V-1A, UL Certified

【Internal Mini SAS Cable】The 10Gtek Mini Serial Attached SCSI (miniSAS) internal cable assembly provides high-speed transfers up to 6 Gbps. Compatible with SAS or SATA storage systems and hot-swappable SATA/SAS drive bays. | 【Advantage】It is the ideal interconnect solution for the growing server and storage markets. MiniSAS is designed to significantly reduce cable size on current storage systems using SAS 4-lane (4x or 4 data lanes) and be widely used in next-generation designs. | 【Design】Both sides of the SFF-8087 cable are wrapped with an industrial-grade braided mesh jacket over individually shielded ribbon cable, a tape strain relief to protect the cable without creating rigidity, and a rugged 36-pin SFF 8087 connector with stainless steel Latch to ensure a secure connection. | 【Application】Server RAID system; Storage system SAS/SATA; HBA interface; Direct-attached storage (DAS). | If the cable you need is not above, please contact us for your design.

【Internal Mini SAS Cable】The 10Gtek Mini Serial Attached SCSI (miniSAS) internal cable assembly provides high-speed transfers up to 6 Gbps. Compatible with SAS or SATA storage systems and hot-swappable SATA/SAS drive bays. | 【Advantage】It is the ideal interconnect solution for the growing server and storage markets. MiniSAS is designed to significantly reduce cable size on current storage systems using SAS 4-lane (4x or 4 data lanes) and be widely used in next-generation designs. | 【Design】Both sides of the SFF-8087 cable are wrapped with an industrial-grade braided mesh jacket over individually shielded ribbon cable, a tape strain relief to protect the cable without creating rigidity, and a rugged 36-pin SFF 8087 connector with stainless steel Latch to ensure a secure connection. | 【Application】Server RAID system; Storage system SAS/SATA; HBA interface; Direct-attached storage (DAS). | If the cable you need is not above, please contact us for your design.

Mini SAS SFF-8087 to SFF-8087 uses high-quality copper wires to ensure stable signal transmission and minimum signal attenuation. This means you can transfer large amounts of data at the highest speed without worrying about data loss or transmission errors. | Supporting transmission speeds of up to 6 Gbps, providing a fast and reliable data transmission experience. Whether in a personal computer, server, or storage array, it can meet your needs for high-speed data transmission. | Using a reliable connector design ensures the plug-in connection's stability and reliability. You don't have to worry about loose or loose connections causing data transmission interruptions or signal interference. | Straight to the Right Exit to meet various connection needs, one end has a straight orientation. In contrast, the other end exits at a right angle, which can be important when considering physical space constraints and routing within a chassis. | It can be used with a variety of SAS controllers and SAS hard drives, giving you greater flexibility and selectivity. It can be used in multiple fields, such as data centers, servers, storage devices, etc., to meet various data storage and transmission needs.

Mini SAS SFF-8088 to SFF-8087 Cable, 30AWG, 0.5 meter. | It is specifically designed to connect an SAS controller with an SFF-8088 port to an internal RAID card with an SFF-8087 port. | SAS2.0 refers to the SAS interface version 2.0, which supports data transfer rates up to 6 Gbps per lane. SAS cables can carry signals over multiple lanes, so the effective bandwidth can be higher. | Support SAS or SATA Storage Systems and Drive Bays. | This cable is designed for high-speed data transfer in professional settings where reliability and performance are critical. If you need such a cable for your setup, ensure that your devices support the SAS2.0 protocol and have the appropriate connectors.

External SAS SFF-8088 Cable Assembly, 5-meter(16.5ft); | AWG26 Twinaxial 8-pair high-bandwidth low-skew wire; Impedance = 100 Ohms; | External cabling solution for connecting Mini-SAS devices; | Serial Attached SCSI (SAS) is a high-speed data storage interface designed for high throughput and fast data access. The SAS interface is mainly used in data storage centers and is backward compatible with SATA. | Compliant with 3Gb/s SAS and 6Gb/s SAS protocols.