compact for IoT wireless & M2M: 802.11AX, 802.11AC, 802.11N, 802.11G, 802.11B, 802.11A As access point antenna: Provides signal to clients in any direction (360-degree horizontal beamwidth). As client antenna: Connect to an access point in any direction. Designed for wireless 802.11ac and other Dual Band 2.4GHz / 5.8 GHz applications. Omni-directional direct connect antennas tuned to perform on 2.4 & 5.8 GHz networks. | Vertically polarized and suitable for many of today’s machine to machine and communication applications such as telemetry, remote monitoring and mesh networking applications. | The wifi antenna working great on PC motherboard and FPV quadcopter Antenna for Bolt 2000/3000 RX (Antenna 2dBi WiFi 2.4/5.8 GHz) Antenna for Bolt 1000 TX or RX (Antenna 2dBi WiFi 2.4/5.8 GHz) Antenna for Bolt 500 TX or RX (Antenna 2dBi WiFi 2.4/5.8 GHz) for WLAN devices using Dual-Band WiFi (802.11ac,802.11n, 802.11ax) or U-NII applications. | Sends WiFi / wireless signal high and low enough to reach 2 levels of a building. Omni dipole antenna: Radiates signal with a beam of 360 degrees; also receives signal from 360 degrees around it Mounts directly onto RP-SMA-female or SMA-female connector of radio or client device Bottom section of "right angle" version has articulating angle that can be adjusted to 90-degrees or other angle. The versions with an all-brass base (connector section) are waterproof / weatherproof rated IP65. | Product name:5.8G Omnidirectional Antenna Type:2.4/5.8G Connector: RP-SMA female V.S.W.R: Less than =1.8 Antenna gain:2dbi Frequencies: 2.4GHz ~ 2.5GHz 4.9GHz ~ 5.8GHz Function:Transmitting and Receiving Radiant scope:Omnidirectional Antenna Impedance:50ohm Length: 1.6 in / 4 cm Long (end-to-end) Weight: .6 oz / 17 g per antenna