This 49mm-m4/3 mount Macro Lens Reverse Adapter Rings is threaded on one side to fit the filter thread of your lens,the other side is mounted onto the for micro 4/3 mount camera body.With the lens being reversed,it greatly increases the lens macro reproduction range capabilities,this saves your cost of buying an expensive macro lens for macro photography.

Steps of use:

1.Take out your lens from your camera body.

2.Mount the adapter ring to your camera body.

3.Reverse your lens with 49mm thread and screw it to the adapter ring until it is tight.

Note: Autofocus,automatic diaphragm (AE metering),and other functions dependent on communication between camera body and lens will be disrupted with this reverse ring mounting on the camera body.

To properly use this lens reverse adapter ring, you have to meet the below two conditions:

a.You have a for micro 4/3 mount camera,below are some of the micro 4/3 mount cameras for your reference:

Compatible with for Olympus E-P1 E-P2 E-P3 E-P5 E-PL1 E-PL2 E-PL3 E-PL5 E-PL6 E-PL7 E-PL8 E-PL9 OM-D E-M1 E-M1 Mark II E-M5 E-M5 Mark II E-M5 Mark III E-M10 E-M10 Mark II E-M10 Mark III E-PM2 E-PM1 PEN-F OM-D E-M1X.Compatible with for Panasonic G1 G2 G3 G5 G7 G9 GH1 GH2 GH3 GH4 GH5 GH5s GF1 GF2 GF3 GF5 GF6 GF7 GF8 GM1 GM5 GX1 GX2 GX7 GX8 GX9 GX85 GX80 GX850 G90 G91

Micro 4/3 System Camera.

b.You have a lens with 49mm filter thread, below are some of the lens(Mounts Any lenses with Ø 49mm filter thread to a micro 4/3-Series Camera)

Advantage: 1. Further increase the distance between the lens and the focal plane; 2. It can achieve good results when shooting three-dimensional scenery; 3. Simple and cheap. 

Disadvantages: 1. After reverse connection, the function of the lens focusing ring is very small, focusing mainly by moving the distance between the camera and the subject; 2. The camera's aperture linkage system no longer works; 3. Short depth of field makes focusing difficult; 4. Only lenses with a focal length between 20mm and 85mm can be used; 5. The lens of the original lens bayonet part is completely exposed, and backlit shooting will cause glare

Package:

49mm-m4/3 Reverse Mount Ring x 1pcs

(Original Manufactory Package)