USB 3.0 Triple Monitor HDMI + 2 DisplayPort KVM Switch for 4 Computers

installation steps:

1. Insert the adapter into the KVM ;

2. Plug the 2*Displayport cable and HDMI cable into the KVM switch and monitor;(Output)

3. Plug the Displayport cable, HDMI cable and USB cable into the KVM switch and your computer/laptop (HDMI and DP cables are not included)(Input)

Please check whether HDMI IN1A, DP IN1B, DP IN1C and USB IN1 are corresponding, whether HDMI IN2A, DP IN2B, DP IN2C and USB IN2 are corresponding, whether HDMI IN3A, DP IN3B, DP IN3C and USB IN3 are corresponding, whether HDMI IN4A, DP IN4B, DP IN4C and USB IN4 are corresponding. Mixed insertion is not supported.

HDMI IN1A + DP IN1B + DP IN1C + USB IN1=PC1

HDMI IN2A + DP IN2B + DP IN2C + USB IN2=PC2

HDMI IN3A + DP IN3B + DP IN3C + USB IN3=PC3

HDMI IN4A + DP IN4B + DP IN4C + USB IN4=PC4

4. Insert the mouse and keyboard into the KVM switch

5. If needed, you can connect a microphone and audio port

Note：

1. Most of the reasons why only onevideo output works is because of incorrect connection. Please make sure eachcomputer have 1 HDMI /2 DP cables connect to the KVM.

2. If the KVM switch does not work, you can turn off the switch on the panel and turn it on again after 2-3 seconds, and it will return to normal.

Triple Monitor KVM Support 2 Switching Modes

Quickly switch between the 2 computers with just one click of the switch button on the panel or use the wired remote controller (included in the package).

Please note: This kvm switch displayport does not support hotkey switching.

4 PCs Share 3 USB 3.0 Devices

This kvm switch 3 monitors 4 computers with 3 USB 3.0 Ports for keyboard, mouse, printers, USB headsets or webcams.

Headphone Jack and Microphone Jack

This dual monitor HDMI KVM switch comes with a 3.5mm Audio Jack port with a DAC chip inside.