1 yard of pre-cut DYI diffusion fabric; IMPORTANT: selecting a quantity higher than 1 will get you multiple 1-YARD PRE-CUT pieces; if you need longer continuous fabric in one piece, search for ALZO Diffusion Fabric by the Yard. | Non-yellowing white translucent silk-like diffusion textile; inexpensive light modifier | Light reduction is about 1.5 f-stops | Fabric is 60 inches wide and 36 inches long and it is not finished on all 4 sides | Also available as pre-cut 2 yard and longer length by the yard; we use this fabric for our softboxes, tents and diffusion panels

Lightweight aluminum construction; adjustable rubber-lined metal band firmly grips zoom or focus lens rings | Works like a follow focus; end wheel finger grip makes very smooth lens moves | 4.5 inches handle length; fits lens rings from 50mm to 80mm diameter | For full lens zooms or deep focus pull actions, this device is superior; it easily covers the full lens ring range without pauses or extreme wrist twists required with a follow focus, and it can produce ultra slow zooms like a pro camcorder | Not applicable for really fast (fat) lenses like f-1.4 as these lens rings are too large

Short cord with 3.5mm TRS stereo female jack to 2 XLR right and left male connectors | Adapts all stereo microphones for pro camcorder XLR audio inputs; works with mics from Rode, Azden, Audio-Technica, Shure, Sony, Tascam, more | All connectors include professional strain relief | 1 XLR cord band marked for R-L stereo orientation | Cord length is 8 inches; not for use with phantom power

Includes an ALZO Suspended Drop Ceiling Mount Kit for ceiling T-bar frame mounting | All aluminum bracket and mount construction | Securely supports all DSLR cameras and some small camcorders | Slotted holes in bracket top allow for perfect balance adjustment | Maximum load is 8 pounds

Ideal for switching cameras | Is included with the ALZO Flip Flash Bracket

Sturdy aluminum construction with slide-out prevention pin and non-rotate rubber base that protects camera finish | Ideal for BMPCC-4K Blackmagic Cinema and Pocket Cinema cameras; also mounts to all DSLR rigs and camera cages | Flush 1/4 x 20 screw mount; mounts to any 1/4 x 20 thread hole | Can support devices up to 10 pounds

Versatile 16 inch height extension for ALZO Ceiling Mounts | 16mm (5/8inch) diameter rod - 40.6cm (16inches) long | Includes male and female 1/4 x 20 threaded ends | Maximum axial load 5 kilos (11Lbs) | Available in Black and White

Versatile 16 inch height extension for ALZO Ceiling Mounts | Available in White and Black | 16mm (5/8inch) diameter rod - 40.6cm (16inches) long | Maximum axial load 5 kilos (11Lbs)

Camera Shoe connector includes positive latch mechanism | Flash Shoe mount includes lock thumb screw | Flash Shoe mount base is metal not plastic | 40" Coiled Cable stretches from 8" to 40"

Connects devices with female tripod screw thread to camera or bracket | All metal with steel screw | Large 1 inch diameter thumb wheel device lock | Length is 1.3 inches

Mount fits all larger projectors with 3 to 4 mounting screw holes weighing up to 20-pounds, but for projectors over 2 pounds, we recommend reinforcing the T-bar frame with a support wire that attaches to the true ceiling; fits Epson, Optoma, Benq, Viewsonic and most other projectors | Easy to install on a suspended drop ceiling with a 1-inch wide T-Bar frame, with 25 degrees pitch; projector drop from the ceiling is 10 inches, and accessory 8-inch extension rods can be added to lower the projector. With the typical drop ceiling, a medium to heavy projector a small amount of movement or sway will occur when touching the projector. We recommend using a remote control where possible. Using the included support wire will provide for a very safe install | Includes an AMERICAN WRITTEN installation manual with illustrations and photos | Includes scissor clamp and one 8 inch aluminum suspension rod, and screws; maximum spider mount leg span is 12 inches, mount hole to mount hole | Projector is not included; it is shown for demonstration purposes only

Comprehensive solution for hanging lights from suspended drop ceiling frame with 1 inch wide T-bar; secure attachment of lights and power cord to the framing with x-clamps aka scissor clamps | Great solution for lighting high traffic areas or small studios where floor stands would be in the way, and an excellent solution for background lighting and ID portrait set-ups | Includes 1-X Clamp with light mount stud and 2 plastic wire hooks for cable suspension; standard 5/8 inch light mount stud or 1/4 inch x 20 screw mount | Maximum weight of suspended object is dependent on attachment method of suspended ceiling frames, and installation may require the addition of support wires; installation instructions included (see "Technical Specification" link below) | Combine with ALZO 16 inch extension rod and ALZO 25 foot power extension cord with 3 illuminated outlets | The standard rated load of the ALZO Suspended Drop Ceiling Photo Video Light Mount Kit is 4 pounds, assuming a proper secure attachment of the suspended ceiling T-Bar frame to the true ceiling. See instructions for adding more load capacity

Comprehensive solution for hanging lights from suspended drop ceiling frame with 1 inch wide T-bar; secure attachment of lights and power cord to the framing with x-clamps aka scissor clamps | Great solution for lighting high traffic areas or small studios where floor stands would be in the way, and an excellent solution for background lighting and ID portrait set-ups | Includes 2-X Clamp with light mount stud and 4 plastic wire hooks for cable suspension; standard 5/8 inch light mount stud or 1/4 inch x 20 screw mount | Maximum weight of suspended object is dependent on attachment method of suspended ceiling frames, and installation may require the addition of support wires; installation instructions included (see "Technical Specification" link below) | Combine with ALZO 16 inch extension rod and ALZO 25 foot power extension cord with 3 illuminated outlets

For small pico video projectors | Rod mounts to 1/4 in x 20 hole in bottom of projector | Includes scissor ceiling frame clip and two 8 inch support rods that create an 9 or 17 inch drop from the ceiling | Mini ball mount allows for tilt angle adjustment | Maximum weight loading is 4 pounds

Unique base design allows for unobstructed camera battery compartment access | Guaranteed unobstructed battery access for Canon 5D, 7D, 60D, Nikon D7000, D3100, D5100 | Base plate slot screw is adjustable and allows for camera balance adjustment | Includes 3 Shoe mounts; 1 can be repositioned, and the end shoe mounts are removable, enabling 1/4 inch x 20 female screw thread mounting | Bracket Handle for improved handling and low angle shooting

Requires accessory ceiling mounting hardware | All aluminum bracket and mount construction | Securely supports all DSLR cameras and small camcorders | Includes ALZO Mini-Ball Camera Mount for easy camera angle adjustment | Slotted holes in top and bottom of bracket allow for balance adjustment

The Shutter Release puts all the necessary controls in your hand and firmly attaches to the ALZO Flip Flash Bracket handle with included hardware; 2-step shutter action for pre-focus and metering AEL, with positive click feedback action on shutter release | Coiled cord stretches up to 18 inches | Compatible with Nikon D750, D600, D90, D5000, D5100, D5200, D5300, D5500, D7000, D7100, D7200, D3100, D3200, D3300 | Not compatible with Nikon Coolpix cameras

The Shutter Release puts all the necessary controls in your hand and firmly attaches to the ALZO Flip Flash Bracket handle with included hardware; 2-step shutter action for pre-focus and metering AEL, with positive click feedback action on shutter release | Compatible with Canon Pro SLR with 3-pin connector; coiled cord stretches up to 18 inches | Compatible camera models are all 1D, all 1Ds, 6D, all 7D, all 5D, 10D, 20D, 30D, 40D, 50D, older D30 and D60; please check the connector on your camera to assure that your camera has the proper connection for the 3 pin plug shown here

Firmly attaches to the Alzo flip flash bracket handle with included hardware | 2-step shutter action for pre-focus and AEL | Positive click feedback action on shutter release | Coiled cord stretches up to 18 inches | Works with Canon XT, XTi, XS, XSi, T2i, T3i, T4, T4i, T5, T5i, T6, T6i, T7, T7i, 1200D, 1000D, 700D, 550D, 500D, 450D, 400D, 350D, 300D, 30, 70D, 60D

Lightweight yet sturdy wall mount for cameras and camcorders | Includes 2 - Zinc Dry Wall Anchors with screws and installation instructions | The load capacity is 4 pounds | With mini ball head with 1/4 x 20 screw thread for camera mounting and angle adjustment

Attaches to any metal bar or flat panel up to 2 inches thick | Provides a standard 5/8 inch connection to support any studio light fixture | Heavy-duty versatile clamping device