Bluedery CPE220 network bridge is a 5.8G Long Range Wi-Fi Extender Outdoor Wi-Fi Ethernet bridge with a digital display. It complies with the 802.11a and 802.11n, standards to ensure interoperability. Point-to-point pairing also can be done by dialing without having to access the GUI, avoid the complex setup program, save much human work and cost, make the long-range wireless coverage, data transmit, and wireless monitoring simple and professional. | PTMP Pre-programmed: The installation of this Wi-Fi outdoor extender aka long range outdoor wireless access point extender is very simple. Simply connect the both bridges to Poe adapters through the Ethernet cables, system will power on, and wait for 1 minute for the both equipment to pair and connect together, the "Link" green LED indicator will turn on to indicate that the both bridges have been paired successfully. | Using 5.8G / 100Mbps wireless transmission rate between wireless Ethernet bridge can support 1.2 miles transmission distance (Barrier-free), and can provide up to 100Mbps wired network speed, suitable for connecting the networks in 2 or more buildings, internet access sharing, remote video camera surveillance, or remote network Wi-Fi access. | Long Range Wi-Fi Extender Point to Point Mode: Connect both outdoor Wi-Fi extender to the Poe power adapter will auto pair, no need connects to computer for the complicated configuration, at point-to-point mode can use for long range video surveillance and internet network sharing, the master bridge output Wi-Fi hot point, you can enter password to get access, extend the WiFi access coverage up to 1.2 miles in 60 degrees angle of the front direction. | Point to Multiple Point Mode: suit for the video surveillance DVR system to receives the IP cameras video stream for different building or place, the master bridge connects to the DVR system, and the slave bridges connects to the IP cameras, This network bridge aka long range Wi-Fi outdoor wireless access point extender can facilitate you manage different building's IP cameras in one system without wiring.

Universal Usage: This wireless bridge bracket mount is suit for outdoor use, suitable for various kinds of antennas and can be installed on building wall or roof. | Weatherproof: Ideal for long-term and outdoor antenna installation, the wireless bridge mount is designed with high-quality iron material, which is not easy to bend or break, snap or crack unless undue force applied, and can be used in all kinds of weather. With proper installation, can withstand strong winds and rain. | Easy Installation: Created to simplify the installation of an outdoor antenna for all wireless bridges, cpes, outdoor security cameras for home or other wireless system. This wireless bridge bracket is simple to install itself and goes a long way toward getting you superior signal. | Withstand the Elements: Designed especially for outdoor use, the wireless bridge wall mount can be placed anywhere, from your roof to a wall, without fear of being knocked down by inclement weather. | Firmness: This wireless bridge pole mount is designed with non-slip gears. After you adjust the angle of the rod, you only need to twist it lightly, and the rod will be firmly fixed. And this pole mount is equipped with two hoops to firmly fix your mount on the rod.