1.The product does not support hardware raid, the product only supports the formation of soft raid under win10 system, or the use of other third-party software to build raid. | 2.Only supports motherboards with detachable PCIE channels.Control the operation of four disks based on the motherboard PCIE channel,The motherboard without PCIE signal split can only recognize one disk | 3.NVME four-disk design, Stable installation, Can run 4 NVME disks at full speed at the same time. | 4.Support 2U server small chassis installation, Built-in multiple sets of high-power DC modules for sustainable and stable work. | 5.The innovative design can accommodate four NVMEs on both sides of the half-height chassis, and can support simultaneous operation.

Micro SD TF to SD Card Kit Mini Adaptor for Extra Storage Macbook Air / Pro / Retina;Support Micro SD / Micro SDHC / Micro SDXC | (The memory card not included);Color: White | Length: 20mm approximately;Short Body SD card kit for Apple Macbook (Please make sure your macbook with SD card slot first) | Work for: MacBook Pro 13": Mid 2009, 2010, 2011, 2012, 2013, 2014 | MacBook Pro 15": Mid 2009, 2010, 2011, 2012, 2013, 2014 MacBook Pro 17": Mid 2012, 2013, 2014 MacBook Retina 15": Mid 2012, 2013, 2014 MacBook Air 13": Late 2010, 2011, 2012, 2013, 2014

PCI-E PCI Express ATX 6Pin Male to Dual 8Pin & 6Pin Female Video Card Extension Power Cable | This PCI Express 6 pin to dual 8 pin power adapter cable lets you connect a standard 6-pin PCI Express power connection provided by the computer power supply to newer ATI and NVidia video cards that require an 8 pin power connection. | A cost-effective solution, the PCIe 6 pin to 8 pin power adapter eliminates the expense of upgrading a computer power supply for the sake of compatibility with a newer video card. | PCI Express Power 6 Pin male * 1 | PCI Express Power 8 Pin Female * 2

USB Male to Firewire IEEE 1394 4 Pin Male iLink Adapter Cord Cable;Only Work for SONY DCR-TRV75E DV | Cannot work for other 1394 or usb device.;Length: 100cm | Supports IEEE 1394 transfer rates of 100/200/400 Mbits ;Fully Firewire and iLINK compatible | Molded strain relief enhances durability of cable against stress Connector: 1 side is 1394 4 pin male. | The other side is USB male

Only Work for SONY DCR-TRV75E DV | Cannot work for other 1394 or usb device. | Supports IEEE 1394 transfer rates of 100/200/400 Mbits | Fully Firewire and iLINK compatible . Molded strain relief enhances durability of cable against stress | Connector: 1 side is 1394 4 pin male. The other side is USB male

12+16pin 2014 2015 Macbook to M.2 NGFF M-Key SSD Convert Card for A1493 A1502 A1465 A1466 | The adapter can covert the NGFF M-key SSD to the12+16pin 2014 2015 Macbook SSD. | Note: The Nvme SSD only work for Mac OS HiSierra. | Compatibility With: | 2013-2015 Macbook Pro SSD

Let your USB 3.0 20pin device connected the USB 2.0 motherboard. | or Let your USB 2.0 9pin device connected the USB 3.0 motherboard. | Data speed: 480Mbps for USB 3.0 device. | The package included two adapters.

You can extend the TF card slot to outside SD/TF card | Connect the SD/TF card for testing | The package included one TF/TF and one TF/SD adapter. | The memory card not included

1) USB4.0 Max 40Gbps Data Transfer Rate:This USB4 adapter can Reach Data Transfer Rate up to 40Gbps,the transmissions speed is twice as fast as Thunderbolt3. | 2) Fast Charging: Practical 140W Power Delivery,This USB 4 Cable can support Max 140W/100W 28V/20V/5A Charging, It will supply power when your USB-C device is in use. | 3) 8K/5K Ultra HD Video Output:This USB4 adapter enables to connect from your USB4 or thunderbolt3/4 Port equipped Devices to your USB-C Monitors, It supports Single 8K@60hz, 5K@60Hz or 4K@60Hz max. video Resolution in your external displays.(please make sure your monitor's Type-c port support DP Alternate Mode for Video.) | 4) With Volt Current Power Display:LED light making charging visible; The adapter with an LED digital display screen that can display charging voltage, current and power in real time. It has a visual design that allows you to know the charging speed in real time and monitor device status. | 5) Angled Reversible Type-C Connector Unique Transparent Design:The angled type Allowing you to connect it to a female port, even if space around the port is limited; The transparent design making more interest and novel; Type C connector is the new design for USB 3.1,Reversible Design for Type C connector,Reversible plug orientation Cable direction.

OCuLink SFF-8611 8x 80pin male to dual SFF-8611 4x male | Data transfer rate up to 16Gbps | This OCuLink 8x cable can be used to connect internal devices, e.g. a backplane with SFF-8611 4x connector to a controller with OCuLink SFF-8611 8x connector. | System requirements: A free OCuLink 8x 80pin interface | Lock to Mating Part: With Active Latch

OCuLink SFF-8611 8x 80pin male to dual SFF-8639 U.2 male | Data transfer rate up to 16Gbps | This OCuLink 8x cable can be used to connect internal devices, e.g. a backplane with SFF-8639 connector to a controller with OCuLink SFF-8611 8x connector. | System requirements: A free OCuLink 8x 80pin interface | Lock to Mating Part: With Active Latch

Data transfer rate up to 16Gbps | OCuLink SFF-8611 8x 80pin male to OCuLink SFF-8611 8x 80pin male | System requirements: A free OCuLink 8x 80pin interface | This OCuLink 8x cable can be used to connect internal devices, e.g. a backplane with OCuLink SFF-8611 connector to a controller with OCuLink SFF-8611 8x connector. | Lock to Mating Part: With Active Latch

transfer rate of Super-Speed USB-C interface can be up to 5Gb/sec (Max) | Backward compatible with previous versions of USB ports (1.0, 1.1&2.0) & SATA hard disks (1.5Gb/s) | Compliance with Serial ATA Specification Revision 3.0 | Supports 2.5" Mass Storage Class Drive. (Not work for 3.5" Disk) | Supports Hot-Swapping and Plug and Play function

Internal Mini SAS 36Pin SFF-8087 to Mini SAS 36pin SFF-8087 Server Hard Disk Raid Data Cable | Length: 70cm | Positive and passive latching ensures that the plug remains mated to receptacle | All internal mini SAS assemblies are capable of supporting SAS/SATA generation I and II bandwidths | For Controller to Backplane applications

E431 E531 X240 Y410P Y510P M.2 NGFF PCI-E 2 LANE SSD to 9.5mm 2.5" SATA 22pin hard disk case Enclosure White;The hard disk case is 7mm height, | There is no hard disk included at the case.;Only work for E431 E531 X240 Y410P Y510P M.2 NGFF PCI-E 2 LANE SSD | Can work for the SSD length: 42mm;Note: The adapter only work for B-key or B/M-key socket, cannot work for M-key socket.

Master/slave etting jumper | CF Compact Flash Memory Card to 50pin 1.8 Inch IDE Hard Drive SSD Converter Adapter It is stable and doesn't have any noise and vibration | You can save money by using CF memory card when you test on computer. Computer is rebooted suddenly because of electrical signal at electric factory. | In this case, CF memory card has the low extent of the damage. | You have to format with FAT32 when you install OS on the CF memory

1. The package only include one connector, the connector angled type is same as the first main photo. | 2. You also can buy the another end connector based your requirement. please search "CYFPV" at our store to buy the other connector. | 3. we also have the FPC cable from connector to connector (20cm or 50cm),please search "CYFPV" at our store. | Work for Multicopter Aerial Photography Typical application: connect your video device with HDMI port to video device with standard HDMI input. | When the cable is too stiff, it may affect the gimbal performance especially for those light weight gimbals. This cable is very soft ,specially oriented brushless gimbal application ,suit for cameras with HDMI port.

CY DMS-59 Male to DVI 24+5 Female & VGA RG 15pin Female Splitter Extension 15cm | Compatible with ALL DMS-59 video cards .will allow you to connect your DMS-59 video card to 1-standard VGA connector and/or 1-DVI connector!;Will work on All DMS-59 video cards! | Splits your video card DMS59 Pin output to allow use of 1- DVI and 1 - VGA connected Monitor at the same time;Suitable Replacement For: Foxconn P/N 31028822 | Please do your own additional application research before buying, we cannot provide technical support for programmingInstructions, manuals, install disks, additional hardware, or software are not included unless specified in this listing;

2-Ports SFF-8087 to SFF-8644 Adapter with Full PCIe Slot Profile Mounting Bracket; | External 8644 to internal 8087 adapter, will work both on the host and device side.With Lowe Profile and Standard Profile bracket. | Supports External SFF-8644 Host Connectors. Supports Internal SFF-8087 Device Connectors. Supports up to 12Gb/s Mini SAS HD Data Transfer Rate. | The High Density (HD) system referenced as HD Mini-SAS (SFF-8644) in the SAS 2.1 standard, meets the 12Gb/s SAS specification. | These new HD Connectors will be used on the SAS 3.0 specification when it is released.

2-Ports SFF-8643 to SFF-8644 Adapter with Full PCI Slot Profile Mounting Bracket; External 8644 to internal 8643 adapter, will work both on the host and device side. | Supports External SFF-8644 Host Connectors. Supports Internal SFF-8643 Device Connectors | Supports up to 12Gb/s Mini SAS HD Data Transfer Rate With Lowe Profile and Standard Profile bracket. | The High Density (HD) system referenced as HD Mini-SAS (SFF-8644) in the SAS 2.1 standard, meets the 12Gb/s SAS specification. | These new HD Connectors will be used on the SAS 3.0 specification when it is released. Cable material may change but the connectors will be the next generation of SAS to run at 12Gb/s.

Fully compliant with USB specification revision 2.0 | Supports USB-based ExpressCard/34mm devices | Support data transfer rate up to 480Mb/s | Hot-plug support allows you to connect /remove this | Adapter without turning off your system

The SFF-8088 is a 26-pin ‘Mini SAS‘ connector, and utilizes a metal outer shell compatible with shielded external connections. Typical application would be a SAS link between a SAS HBA to a SAS drive subsystem. | External SAS Cable features "mini-SAS" SFF-8088 to SFF-8088 with heavy- duty metal backshells. | This 4-channel cable is constructed with a high-performance Madison cable, which features individually shielded parallel pairs, | double EMI/RFI shielding, EMI Noise Suppressor, and 10 Gigabytes per second performance on each channel. | MINI SAS 26P TO 26P,support 6gbps Band. Length: 100cm

1. The adapter only work for HDMI source to HDMI+VGA displays, it can't be reversed. 2. The HDMI+VGA output only can display the same picture and same Resolution(don't support difference resolution). 3. Support 1080p 60hz max. 4. Need to connect micro usb power. (The micro usb cable and power adapter not included.) | Support HDMI Repeater function Audio Decoder which support 2-channel IIS and S/PDIF audio outputs Support YCC422 TO YCC444 conversion Support YCC to RGB converdion in ITU-R BT.601 and 709 color space Support Separate Sync andlor SOG (Sync On Green) on VGA output Support LPCM and Compressed Surround Audio Size:6.2*4.5*1.6cm | HDMI/MHL/HDCP controller which manages HDMI/MHL RX,HDMI TX and HDCP automatically without the need for user to develop firmware CBUS controller which provides the translation between the MHL RAP/RCP Request and the HDMI CEC Command | HDMI/MHL Recever core which is compliant with HDMI 1.4 and MHL 2.0 specification HDMI Trnsmitter core which is compliant with HDMI 1.4 specification HOCP RX/TX Engine which is compliant with HDCP 1.4 specification DAC supporting up to 150 Mhz pixel rate for VGA output port | The chip supports 1 HDMI/MHL RX port and 1 HDMI TX port the with repeater function, The chip also supports decoded Audio and VGA output. The chip is compliant with HDMI 1.4 and MHL 2.0 specification.

You need to set your IDE 3.5" disk to master mode. | Adapter is good for up grading an old computer with 3.5 inch IDE HDD to a new 3.5 inch SATA HDD or SSD. | Compatible with DOS, Windows 98/98SE, Me, 2000, 2003, XP, Vista, Windows 7 & Windows 8 & Windows 10& Linux. | No need for an extra power supply. No driver needed, plug and play, unit is not hot swappable. | Works with all IDE 40Pin Drives up to 1000GB , Supports IDE 66/100/133MB/s

3.5 inch IDE 40Pin HDD Drive to SATA converter Board Works with all IDE 40Pin Drives up to 1000GB | Supports IDE 66/100/133MB/s No need for an extra power supply. | No driver needed, plug and play, unit is not hot swappable. | Adapter is good for up grading an old computer with 3.5 inch IDE HDD to a new 3.5 inch SATA HDD or SSD. | Compatible with DOS, Windows 98/98SE, Me, 2000, 2003, XP, Vista, Windows 7 & Linux.

Internal 36 Pin Mini SAS SFF-8087 Host to 4 SFF-8482 Target SAS Hard Disk and SATA Power Cable | enables you to connect e.g. a controller with mini SAS 36pin connector (SFF 8087) to 4 SAS (SFF 8482) HDD. | Hard Disk Fanout Raid cable | Host: SFF-8087 connector . Target: SFF-8482 SAS connector | With SATA 15pin power connector .100cm

enables you to connect e.g. a controller with mini SAS 36pin connector (SFF 8087) to 4 SAS (SFF 8482) HDD. | Hard Disk Fanout Raid cable | Host: SFF-8087 connector. Target: 4xSFF-8482 SAS connector | With SATA 15pin power connector | Length:50cm

One-touch switching of two USB3.0 device between one computer. | One-touch switching of one USB 3.0 device between two computers. | USB Input(used in computer):driver free for Windows 10/8/8.1/7/Vista/XP and Mac OS X, Linux, and Chrome OS systems. | Transfer rate: USB3.0 Up to 5Gbps | It's ideal for sharing a printer or scanner in a small office environment. It's also great for use at home if you have multiple PCs or Macs.

LFH DMS-59pin Male to 15Pin VGA RGB Female Extension Adapter for PC Graphics Card | Compatible with ALL DMS-59 video cards | Will allow you to connect your DMS-59 video card to standard vga connector! | Please do your own additional application research before buying, we cannot provide technical support for programmingInstructions, manuals, install disks, additional hardware, or software are not included unless specified in this listing.

The adapter can covert the 2230/2242 NVME SSD to the Macbook Pro A1708 A1707 A1706 SSD. | Compatibility With:2016/2017 MacBook Pro A1708 A1707 A1706. | Note: The adapter only work for 2230/2242 NVME SSD. | Package included: Convert Card, Screws & Nut & Screwdrivers (T5, P5)

Bandwidth Speed: PCIe4.0 gen4x2 (support CFexpress B specification full speed) | Product use: suitable for the extension of the CFexpress card slot to the M.2 NVME 2230 hard drive | Friendly reminder: XBOX dedicated expansion card, currently only supports Western Digital CH SN530 hard drive. | Material advantages: high-quality gold-plated connectors are used, high-frequency and low-resistance high-quality materials are used for the PCB, and the PCB is precision-crafted. | Design advantages: Differential signal enhanced layout design, no CAF micro short circuit phenomenon, high-speed signal data transmission, no parasitic capacitance and parasitic inductance signal attenuation interference.

PCI-E 4x Mainboard to CF Express Extension Card Adapter for CFE Type-B Support R5 Z6 Z7 Memory Card | Bandwidth Speed: PCIe4.0 gen4x2 (support CFexpress B specification full speed) | Product use: suitable for the extension of the CFexpress card to the PCI-E slot.(not work for XQD card)

Bandwidth Speed: PCIe4.0 gen4x2 (support CFexpress B specification full speed) | Product use: suitable for the extension of the CFexpress card to the M.2 NVME slot.(not work for XQD card) | Wire length 20cm, excluding PCB and connectors | Material advantages: high-quality gold-plated connectors are used, high-frequency and low-resistance high-quality materials are used for the PCB, and the PCB is precision-crafted. | Design advantages: Differential signal enhanced layout design, no CAF micro short circuit phenomenon, high-speed signal data transmission, no parasitic capacitance and parasitic inductance signal attenuation interference.

Easy to use: Simply plug in the SFF-8654 38Pin end of the cable into your device and the MCIO end into your external hard drive, and you're ready to go. Industry standards: Support for SAS 3.0/4.0, PCIe Gen 3/4/5, 25G Ethernet, and 56GT/s PAM4 means that you can trust that your equipment will perform at optimal levels without any signal loss or degradation. | Mini Cool Edge IO (MCIO) cable assemblies,These products can provide high performing channels with the added flexibility of where/how to use signals in your system. | High-speed data transfer: This cable is designed for use with ssd that use MICO to SFF-8654 connectors, allowing for fast and reliable data transfer at speeds of up to 24 Gbps. | What is mini cool edge Io (MCIO): MCIO cables are designed for data center, networking and telecommunications markets that use SAS, PCIe, Ethernet and othersignal protocols. The solution can support cable to board and card to board applications in system, which include chip to chip, chiptomodule, chip to board and card edge option. | High-performance cable for networking and server equipment: The MCIO Mini Cool Edge IO is designed to support a wide range of protocols, including SAS, PCIe, Ethernet, and more, ensuring optimal performance for your equipment.

CY Mini PCI-E mSATA SSD to 1.8 Micro SATA 7+9 16pin Adapter Add on Cards PCBA for SSD Hard Disk | This unit is an mSATA SSD to a 1.8 micro SATA 16pin Adapter Card.;The card is compliant with 1.8" micro SATA specification. | It may be used in any application where 1.8"micro SATA SSD drive may be used:;Intel mSATA series SSD and compatible Storage Device | Samsung PM800 series SSD and compatible Storage Device;Toshiba mSATA SSD and compatible Storage Device

Create your own blazing fast external SSD with this USB 3.0 mSATA SSD. | A USB 3.0 external SSD offers incredible performance far beyond that of a USB 3.0 flash drive. | Features and Specifications. Fits 1.8" (standard size) mSATA drives | Max out the USB 3.0 bus, real world speeds can top 200 MB/s. Small and portable | Note: This adapter is only compatible with MSATA connector. Not compatible with 50mm Mini PCI-e SATA and Mini PCI-e PATA.

Support 2230 NVME to 2242 NVME extension, or 2230 SATA/NGFF to 2242 SATA/NGFF extension. | Work for 2230 to 2242 SSD , Compatible with Legion Go ThinkPad X270 X280 t470 t480 L480 T580 serials. | It can't convert NVME to SATA, also can't convert SATA to NVME. | PCB Card only. (not include SSD) | Extend the SSD from 2230 socket to 2242 SSD.

OCuLink PCIe SFF-8611 4i to OCuLink SFF-8611 SSD Data Active Cable 50 cm | This OCuLink cable can be used to connect internal devices, e.g. a backplane with OCuLink SFF-8611 connector to a controller with OCuLink SFF-8611 connector. | OCuLink SFF-8611 male to OCuLink SFF-8611 male | Lock to Mating Part: With Active Latch | Data transfer rate up to 8 Gbps

This OCuLink cable can be used to connect internal devices, e.g. a backplane with SFF-8654 connector to a controller with OCuLink SFF-8611 connector. | Cable length: 50cm | OCuLink SFF-8611 male to SFF-8654 male | Data transfer rate up to 8Gbps | Lock to Mating Part: With Active Latch

This SAS cable can be used to connect internal devices, e.g. a backplane with Slim Line SAS connector to a controller with Slim SAS SFF-8654 4i connector. | Connector 1: Slim SAS 4i 38pin. Connector 2: Slim SAS 4i 38pin. Applications for Servers,Data Storage,Workstation. Meet PCIe Gen3 and SAS4.0 specification. | Features and Benefits: 1.Smaller size connector and cable saves device space. 2.Provide four channels signal transmission as per industry standard. | Features and Benefits: 3.Data speed: 24Gbps for SAS and 8GT/s for PCIe per channel 4.Meet SAS4.0, Ultraport SlimSAS SFF-8654 specification | Ultraport SlimSAS 4i 38Pos Cable Assembly. Slim SAS 4i Straight to Slim Line SAS. Length: 40cm