Description: This Shutter Release Cable is used to connect Ronin SC to the 2.5mm Port on specified cameras to control the camera Suitable for: RSS Control Cable for DJI Ronin SC stabilizer This Camera Shutter Release Cable can be used to control following cameras which have 2.5mm port to focus/ Timing / Delay/ Panorama and other functions in the Ronin APP. Camera for FUJIFILM XT2, XT3, XH1, XH2, XT20, XT30, XA3, XE3, XE2 Camera for CAN0N: for E0S R, RP, M5. It also fits to 80D, 70D, 77D, 700D, 800D, 760D, 750D, 650D, 1100D, 1300D, 1500D, M5, M6, etc. Camera for Pentax K5, K5Il, K7, K30, K10D, K20D, K100, K200, 645D How to use: When it is connected to FUJI camera: 1. Set “PC Connection mode“ to “USB Auto“. The specific setting method is as follows: Select “Menu”- select “Settings”- Select “Connection Settings”- “PC Connection mode”- “USB automatic mode”. 2. The camera button function is not supported during the connection. If you need to use the camera button function, ensure that the holder is turn off. 3. After completing the cable connection, turn on the stabilizer, then turn on the camera. If the camera is not recognized, restart the camera or remove and reconnect the cable to the camera. When it is connected to camera: 1. When the dialog page is displayed, select the PC (Tether) mode. 2. Switch the built-in focusing mode switch to MF to use the electronic focusing function. 3. Switch the built-in focus mode switch of the body to AFS/AFF/AFC, etc., and trigger the automatic focusing of the camera through the camera control button. 4. Attention: When the camera is playing back, triggering the electric focus may cause the camera to crash. After completing the cable connection, Turn on the stabilizer, then turn on the camera Package included: RSS Control Cable for FUJIFILM × 1