The foam is already Pre-Cut to fit a pistol, so the customization work is already done for you! The case holds 1 semi-auto handgun & 2 extra magazines (see "Pre-Cut Diagram" image for where the foam is pre-cut) | Case has a lifetime warrenty & is 100% Waterproof, & Dustproof | DO NOT SETTLE for cheap and flimsy diced foam! Diced foam tears easily, retains water (rust!), collects dirt, and even if

[Case Fits] 14 External Hard Drives up to 5.0"x3.22"x0.83". Perfect for most 2.5" disk external hard drives. Utilize any leftover empty pockets to hold USB cords. Compatible with many Western Digital (WD), Seagate, Sandisk, LaCie, Samsung, Crucial, Toshiba models and more. | [Custom Foam Interior] The shock absorbing foam is a high grade closed cell polyethylene that will last a lifetime, and is PRE-CUT to perfectly fit most External HDDs. Protect your Hard Drives while keeping everything well organized for storage, travel & shipping. The pre-cut custom foam fits your Hard Drives out of the box! No messy, irreversible, time consuming plucking required! | [Case Features] Case is waterproof (ip67), dustproof, compact, & airtight. The exterior dimensions are 10.50"L x 9.50"W x 6.87"H. The case has a folding handle, padlock holes, a pressure relief valve, and an o-ring seal. | [The Competition] Don't fall for fake "hard shell" cases! The competition will call their products "hard" or "durable" when really their products are only just molded, soft fabric zipper bags. Remember, if it has a zipper, it's not waterproof OR heavy duty! | [Disclaimer] Hard Drives and accessories are not included. This product is the carry case with custom foam only. | [Lifetime Warranty ] Case comes with a Lifetime Warranty. Your Hard Drives will be protected for years to come.

Case fits combos of up to 10 3.5" HDDs, 40 2.5" Drives (HDD or SSD), or 180 M.2 SSDs | The foam has been ingeniously cut to maximize capacity of each drive type! | The 3.5" HDDs, either 0.75" or 1.0" thick, simply fit into the main pocket | The 2.5" Drives (HDD or SSD) utilize a pull-out foam "rack" that holds 4 drives per main pocket | The M.2 SSDs utilize 2 "flat" bottom foams (for support), and 1 "slotted" top foam to fit 18 drives per main pocket. The M.2 slots only fit SSDs that are 22mm wide, and do not fit heat sinks | Pink Anti-Static Foam is utilized to prevent damage and data corruption that can happen from the natural buildup of static electricity. Only trust Pink Anti-Static Foam when it comes to storing delicate electronics! Foam is closed cell so it can be wiped dry if wet, and is non-abrasive, will absorb impacts, and will not deteriorate over time | The exterior case dimensions are 10.50"L x 9.50"W x 6.87"H. Case is 100% waterproof airtight & dustproof. Hard injection molded plastic shell protects from shocks, drops, impacts, and the elements. Padlock holes for added security. Built in pressure relief valve so the case can be opened in any altitude. Perfect for airline checked or carry on baggage.

Case Fits Swarovski BTX eyepiece module, Objective lens module (65mm, or 85mm, or 95mm, or 115mm) & Small accessories. (spotting scope & accessories depicted are not included) | Removable foam spacers to fit different objective lens sizes perfectly. Foam is non-abrasive, (closed cell) military grade polyethylene which can be wiped clean. | Exterior structural ribs for added strength. Metal reinforced standard sized padlockable holes for added security. | Comfortable low profile no-slip grip folding carry handle for easy mobility. 2 snap latches provide haptic feedback when closing the case. | Approved for airline carry-on or checked luggage.

[Case Fits] Starlink Mini Dish, Starlink Wall Plug Power Supply, DC Power Cable,Both the Kickstand Mount and the Pipe Adapter Mount, Small Extra Accessory Pocket | [Custom Foam] Foam is closed cell, military grade polyethylene that can be wiped clean if dirty, and will not absorb water, oils, or other liquids,Antenna Dish is held firmly in place by both the lid foam and also foam around the antenna, Fits entire factory kit from Starlink | [Case Features] Case is 100% waterproof, & dustproof, Case is heavy duty & shippable,Airline approved,Purge valve for changing altitudes,Starlink and its accessories/peripherals are not included | [Case Dimensions] 19.44"L x 14.00"W x 4.75"H | [The Competition] Don't fall for fake "hard shell" cases! The competition will call their products "hard" or "durable" when really their products are only just molded, soft fabric zipper bags. Remember, if it has a zipper, it's not waterproof OR heavy duty! | [Disclaimer] Starlink and its accessories/peripherals are not included. This is a carry case only.

[Case Fits] Starlink Mini Dish, Starlink Wall Plug Power Supply, DC Power Cable, Ethernet Cable, both the Kickstand Mount and the Pipe Adapter Mount | [Custom Foam Interior] Foam is closed cell, military grade polyethylene that can be wiped clean if dirty, and will not absorb water, oils, or other liquids, Antenna Dish is held firmly in place by both the lid foam and also the foam around the antenna | [Case Features] Hard injection molded plastic shell protects from shocks, drops, impacts, and the elements, Exterior structural ribs for added strength, Perfect for airline carry-on, travel & storage 4 padlock holes for added security, Comfortable integral carry handle, Starlink and its accessories/peripherals are not included | [Case Dimensions] 17.00"L x 16.00"W x 6.12"H | [Disclaimer] Starlink and its accessories/peripherals are not included. This is a carry case only.

[Case Fits] Starlink Mini Dish, Starlink Wall Plug Power Supply, DC Power Cable, Ethernet Cable, Both the Kickstand Mount and the Pipe Adapter Mount, Small Extra Accessory Pocket | [Custom Foam Interior] Foam is closed cell, military grade polyethylene that can be wiped clean if dirty, and will not absorb water, oils, or other liquids Antenna Dish is held firmly in place by both the lid foam and also foam around the antenna Fits entire factory kit from Starlink, plus an ethernet cable | [Case Features] Case is 100% waterproof, & dustproof, Case is heavy duty & shippable,Airline approved, Purge valve for changing altitudes, Starlink, its accessories/peripherals, and ethernet cable are not included | [Case Dimensions] 17.62"L x 13.37"W x 7.00"H | [The Competition] Don't fall for fake "hard shell" cases! The competition will call their products "hard" or "durable" when really their products are only just molded, soft fabric zipper bags. Remember, if it has a zipper, it's not waterproof OR heavy duty!