『Mini 4P - 2x Right-Angle SATA』Mini 4 Pin port plugs into Lenovo motherboard (NOTE: It is mini 4 pin port, not standard 4 pin port. Please refer to the image 2nd for mini 4 pin port's dimension.), Right-angle 15 Pin SATA port plugs into the hard drive; | 『Connectors』Connector A: ATX 12V mini 4 pin (NOTE: not standard 4 pin. Please refer to the image 2nd for mini 4 pin port's dimension), Connector B: 2x Right-angle SATA 15 pin (compatible with the equipment with sata port such as: liquid CPU cooler, mechanical hhd and ssd); | 『Compatibility』Compatible with Lenovo motherboard with mini 4 pin port including: M410 M415 M510 M510S M510A M610 M710 B415 B250, Thinkcentre m720 tower, ThinkSystem ST50 Servers, ThinkCentre M710t; | 『Parameter』Gauge: 18AWG, Length(including connectors): 18 inches(46cm)，Between 2 SATA: 2.36 inches(6cm),Between 2 SATA: 8 inches(20.5cm), Quantity: 2 pieces, Self-adhesive tape*1pcs; | 『Note』This cable was only designed for Lenovo motherboard with mini 4 pin port as listed. If you connect it with other incompatible motherboards, it will burn or damage the motherboard and we won’t take any responsibility for wrongly using or installing. Please carefully check the compatible types or contact us if you are not sure about it;

Including: 1x 40-pin male to female jumper wires, 1x 40-pin male to male jumper wires, 1x40-pin female to female jumper wires=120pcs in total; | Made of high-quality copper wire, cable length: 3.93-inch/10cm; | The male end is used to insert into standard 0.1"inch (2.54mm) female sockets; | The female end is used to insert into standard 0.1"inch (2.54mm) male headers; | The cables are available to be separated to form an assembly containing the number of wires you requested for your connection and to support non-standard odd-spaced headers;

『24P - 8P』24 Pin end to plug into the standard 24 pin ATX Power Supply,8 Pin end plug into Dell motherboard; | 『Solution』Allowing you to convert standard 24 pin ATX power supply to 8 pin Dell motherboard power supply connector; | 『Compatibility』Compatible with Dell Optiplex 3020/3040/3046/5040/7020/7040/7060/9020, H61/H81/Q77/Q87/B75/A75/Q75/Q65, PowerEdge T20/T30/T130 server, Vostro DT 3671, XE2 Desktop, Precision T1700/T3620 and other 2014+ moldes using 8 pin power connector in motherboard; | 『Parameter』Gauge: 1007-18AWG (standard tin-coating copper wire), Length(excluding the connectors):12inches(30cm), Maximum power: 1000 watts, Quantity: 1pcs, Self-adhesive tape*1pcs; | 『Note』Not compatible with Dell Inspiron series such as: 3653 3650 3655 3250 3252 3268 3660 3667 3668 3670. This cable was only designed for some types as listed in the 3rd Point. In order to avoid any compatible problems, please carefully check your PC type or contact us if you are not sure about it. If you connect this cable to other incompatible PC or motherboard, it will burn or damage the motherboard and we won’t take any responsibility for wrongly using or installing;

『CPU 8P - Dual 8P(6+2)』ATX 8 pin male end to connect to the power supply (NOTE: 8 pin male connector is ATX 8 pin, not pci-e 8 pin.) and two PCIe 8 pin(6+2) male ends to plug into the video graphics card.(NOTE: the 8 pin end and two 8 pin(6+2) male ends cannot be used interchangeably); | 『Only designed for graphics vedio cards, it doesn't work with motherboards』Compatible with 6-pin & 8-pin graphics cards from popular manufacturers such as: ASUS, ASRock, Gigabyte, Radeon, Sapphire, NVIDIA Tesla GPU, etc. (The 8 pin (6+2) ends could be used as 6 pin or 8 pin end by sliding on/off the 2 pin.); | 『Compatibility』Compatible with Corsair RM/RMX/RMi/HX/HXi/AX/AXi/SF/TX/TX-M/CS/CS-M/CX/CX-M series,Greatwall BTX-650SD/750SD/1000SD/EPS 1250DA/1560DA, Cougar CMX400W/450W/CX series/GX800W/GX600W/GX1050W,Antec Neo Eco 400M/650M/550M, Tt smart SE530/SE730, Thermaltake toughpower xt platinum 1275W/775W, OCZ 500M/700M XSP series, OCZ 700w mod x stream-pro;(NOTE: Do not work with AX1200.) | 『Parameter』Length(including connectors): 25-inch + 9-inch(63cm+23cm), Gauge: 1007-18AWG(standard tin-coating copper wire), Quantity: 1pcs, Self-adhesive tape*1pcs (only designed for graphics vedio cards, it will not work with motherboards); | 『Note』This cable was only designed for the brand and model as listed in the 3rd Point. If you use other incompatible brand PSUs or types, it will definitely burn or damage the PSUs or graphics cards and we won’t take any responsibility for wrongly using or installing. Please carefully check the compatible types or contact us if you are not sure if it supports your power supply;

『Dual Mini 6P - PCIe 8P』Dual mini 6 pin male end to plug into the Mac motherboard (NOTE: the end is mini 6 pin, not stanard 6 pin size.), PCIe 8 pin male end to plug into the video graphics card; | 『Compatibility』Compatible with Mac Pro, Power Mac G5 and all Mac Pro Models including: (1,1),(2,1),(3,1),(4,1),(5,1) or (2006),(2007),(2008),(2009),(2010),(2012); | 『Connector』Connector A: 2x mini 6 pin male, Connector B: 1x 8 pin standard PCIe male; | 『Parameter』Gauge: 1007-18AWG (standard tin-coating copper wire), Length(including the connectors): 15-inch+15-inch(38cm+38cm), Rated power: 300W, Quantity: 1pcs, Self-adhesive tape*1pcs; | 『Note』This cable was only designed for Mac Pro models as listed in the 2nd Point. Please check your PC type or contact us if you are not sure about it. If you connect this cable to other incompatible motherboards, it will burn or damage the motherboards or graphics card and we won’t take any responsibility for wrongly using or installing;

『Mini 6P - Standard 6P』Mini 6 pin male end to plug into the Mac motherboard (NOTE: the end is mini 6 pin, not stanard 6 pin size.), Standard 6 pin male end to plug into the video graphics card; | 『Compatibility』Compatible with Mac Pro, Power Mac G5 and all Mac Pro Models including: (1,1),(2,1),(3,1),(4,1),(5,1) or (2006),(2007),(2008),(2009),(2010),(2012); | 『Note』One end is Mini 6 pin male, the another end is 6 pin standard PCIe male. Please check the image 4th for details. This cable was only designed for Mac Pro models as listed in the 2nd Point. Please carefully check your PC type or contact us if you are not sure about it. If you connect this cable to other incompatible motherboards, it will burn or damage the motherboards or graphics card and we won’t take any responsibility for wrongly using or installing; | 『Note』This cable was only designed for Mac Pro models as listed in the 2nd Point. Please check your PC type or contact us if you are not sure about it. If you connect this cable to other incompatible motherboards, it will burn or damage the motherboards or graphics card and we won’t take any responsibility for wrongly using or installing; | 『Parameter』Gauge: 1007-18AWG (standard tin-coating copper wire), Length: 14-inch(35cm), Rated power: 300W, Quantity: 2pcs, Self-adhesive tape*1pcs; ( For the sleeved item, please refer to the link https://www.amazon.com/dp/B07F7XTSWL )

『8 Pin PCIe Cable』Providing a convenient solution for extending the connection length from PCIe cable to GPU; | 『PCIe 8P Extension』PCIe 8 pin female end to plug into the PCIe 8 pin male connector of PCIe cable and 8 pin(6+2) male end to plug into the video graphics card (8 pin (6+2) end could be used as 6 pin or 8 pin end by sliding on/off the 2 pin); | 『Compatibility』Compatible with 6-pin & 8-pin graphics cards from popular manufacturers such as: ASUS, ASRock, EVGA ,Gigabyte, Radeon, Sapphire, NVIDIA Tesla, etc.; | 『Parameter』Length(including connectors): 9-inch(23cm), Gauge: 1007-18AWG(standard tin-coating copper wire), Quantity: 2pcs, Self-adhesive tape*1pcs; | 『Note』This cable was only designed for graphics card (GPU), not motherboard or CPU. It will be damaged and burned once you connect it to motherboard or CPU and we won’t take any responsibility for wrongly using or installing. Please contact us if you have any questions;

『SATA Power Cable for Hikvision Video Recorder』4 pin port connects to Hikvision video recorder ( Note: This is special 4 pin, only works with Hikvision video recorder as listed,Only works with Hikvision video recorder as listed. ), SATA port connects to hard drive HDD; | 『Connector』Connector A: 4 pin(Note: This is special 4 pin, only works with Hikvision video recorder as listed. ), Connector B: SATA female; | 『Compatibility』Only compatible with Hikvision video recorder such as:7100 series,D1 series(D1-108C),N1 series(N1-104),71 series(7104,7108,7116),DS76 series(DS7604n-e1/4p),DS78 series(DS7804n-k1),7808hgh,7816hgh,5108h,5116h,DH-NVR4208,NVR4216,2116H, 3100 series(DH-DVR3104); | 『Parameter』Gauge: 1007-18AWG(standard tin-coating copper wire), Length(including connectors): 7.5inches(19cm), Quantity: 2pcs, Self-adhesive tape*1pcs; | 『Note』This cable only works with Hikvision video recorder as listed. If you use other incompatible devices, it will definitely burn or damage the hard drive and we won’t take any responsibility for wrongly using or installing. Please carefully check the compatible types or contact us if you are not sure if it supports your power supply;

『PCIe 8P(6+2) - 2x SATA』Connects a PCIe video card with an 8 pin or 6 pin connector to a power supply with two spare SATA power connections(The 8 pin (6+2) end could be used as 6 pin or 8 pin end by sliding on/off the 2 pin.); | 『Solution』Providing a convenient solution for a power supply without PCIe connection for GPU power, Dual SATA connectors were designed to connect separate rails to power the PCIe video graphics card from an older PSU; | 『Compatibility』Compatible with 8-pin or 6-pin graphics cards from popular manufacturers such as: ASUS, ASRock, EVGA, Gigabyte, Radeon, Sapphire, NVIDIA Tesla GPU, etc.; | 『Parameter』Length(including connectors): 9-inch(23cm), Gauge: 1007-18AWG(standard tin-coating copper wire), Quantity: 2pcs, Rated power: 300W, Self-adhesive tape*1pcs; | 『Note』Please check the specifications of your graphics card and PSU for power requirements,and make sure that both ends of the cable fit your devices;

『PCIe Cable for Corsair)』: ATX 8 pin male end to plug into the power supply (NOTE: the 8 pin male connector is ATX 8 pin, not pci-e 8 pin.) and PCIe 8 pin(6+2) male end to plug into the video graphics card.(NOTE: the 8 pin end and 8 pin(6+2) male end cannot be used interchangeably); | 『Compatibility』: Compatible with Corsair RM/RMX/RMi/HX/HXi/AX/AXi/SF/TX/TX-M/CS/CS-M/CX/CX-M series,Greatwall BTX-650SD/750SD/1000SD/EPS 1250DA/1560DA, Cougar CMX400W/450W/CX series/GX800W/GX600W/GX1050W,Antec Neo Eco 400M/650M/550M, Tt smart SE530/SE730, Thermaltake toughpower xt platinum 1275W/775W, OCZ 500M/700M XSP series, OCZ 700w mod x stream-pro;(NOTE: Do not work with AX1200.) | 『Only designed for graphics vedio cards, it doesn't work with motherboards』: Compatible with 6-pin & 8-pin graphics cards from popular manufacturers such as: ASUS, ASRock, Gigabyte, Radeon, Sapphire, NVIDIA Tesla GPU, etc. (The 8 pin (6+2) ends could be used as 6 pin or 8 pin end by sliding on/off the 2 pin.); | 『Parameter』Length(including connectors): 25-inch(63cm), Gauge: 1007-18AWG(standard tin-coating copper wire), Color: Black, Quantity: 2pcs, Self-adhesive tape*1pcs (only designed for graphics vedio cards, it will not work with motherboards); | 『Note』This cable was only designed for the brand and model as listed in the 1st Point.(Not compatible with EVGA and seasonic power supply.) Using the cable with unsupported PSUs will definitely damage the PSUs, GPUs or other devices. Please do not use with any makes or models not listed in our compatibility list. Please carefully check the compatible types before purchasing and contact us if you are not sure if it supports your power supply;

『SATA Power Cable for Lenovo Motherboard』4 Pin port plugs into Lenovo motherboard (NOTE: It is standard 4 pin port, not mini 4 pin port.), SATA port plugs into the hard drive; | 『Connectors』Connector A: ATX 12V 4 pin(NOTE: not mini 4 pin. Please refer to the image 3rd for 4 pin port's dimension), Connector B: SATA (compatible with the equipment with sata port such as: liquid CPU cooler, mechanical hhd and ssd); | 『Compatibility』Compatible with Lenovo motherboard with standard 4 pin port including: Q77 Q75 E450 E350 D510 (NOTE: It only works with standard 4 pin port, not mini 4 pin port.); | 『Parameter』Gauge: 18AWG with braided sleeves for easy cable management, Length(including connectors): 12 inches(30cm), Quantity: 3 pieces, Self-adhesive tape*1pcs; | 『Note』This cable was only designed for Lenovo motherboard with standard 4 pin port as listed. If you use other incompatible brand motherboards or types, it will definitely burn or damage the motherboard or hard driver and we won’t take any responsibility for wrongly using or installing. Please carefully check the compatible types or contact us if you are not sure if it supports your motherboard;

『Compatibility』Compatible with HP Z200/Z210/Z220/Z230/Z240 server workstation motherboard which has 6 pin port, HP ProDesk 600 G1/G2 SFF,690 G1 SFF, HP EliteDesk 800 G1/G2,600/880 G1 SFF/TWR, HP Compaq SFF/MT/CMT Series (4000/4300/6000/6005/6060/6080/620/628/6300/6305/6380/8000/8080/8100/8180/8200/8280/8380) | 『Best Solution』Allowing you to convert standard 24 pin ATX power supply to 6 pin HP server workstation connector. The updated cable eliminates the fan error beep.(Note: It maybe cause the "fan error " when to use it on the HP Elite Desk G2/HP Prodesk 600 G2 micro tower type.); | 『24P-6P』24 Pin end to plug into the standard 24 pin ATX Power Supply, standard 6 Pin and small 6 pin P2 ends to plug into the HP motherboard; (NOTE: Please refer to image 4th to confirm if it works with your pc type, and don't forget connecting the ATX 4 pin cable of your replaced power supply to the CPU 4 pin port on your motherboard.) | 『Parameter』Gauge: 1007-18AWG (standard tin-coating copper wire), Length: 13.3 inches(34cm), Maximum power: 1000 watts, Quantity: 1pcs, Self-adhesive tape*1pcs; | 『Note』Please carefully check the image of original P2 connector with wires. It was only designed for some types of HP PCs as listed. If you connect it with other incompatible types, it will burn or damage the motherboard. Please carefully check the compatible types before placing the order or contact us if you are not sure about it;

『24P - 6P』24 Pin end to plug into the standard 24 pin ATX Power Supply,6 Pin end plug into Dell motherboard; | 『Solution』Allowing you to convert standard 24 pin ATX power supply to 6 pin Dell motherboard power supply connector(Note: When to connect it with Dell motherboards, the power supply will still be on even if you turn off your computer. Only if you unplug the power cable, the power supply just stop working and the fan will stop spining.); | 『Compatibility』Compatible with Dell Inspiron 3470，Dell Optiplex 3050/3060/3080/3668/5050/5060/5080/7040/7050/7060/7070/7080 MT, Dell VOSTRO 3650/3653/3660/3667/3668/3669/V3267/3888 with 6 pin port and other Dell motherboards using 6 pin power connector (Note: Do not work with Dell workstation.); | 『Parameter』Gauge: 1007-18AWG (standard tin-coating copper wire), Length(including the connectors):13.3inches(34cm)(approx), Maximum power: 1000 watts, Quantity: 1pcs, Self-adhesive tape*1pcs; | 『Note』Do not work with Dell workstation. This cable was only designed for some types of Dell motherboards as listed in the 3rd Point. In order to avoid any compatible problems, please carefully check your PC type before placing order or contact us if you are not sure about it. If you connect this cable to other incompatible PC or motherboard, it will burn or damage the motherboard and we won’t take any responsibility for wrongly using or installing;

『5P - 15P SATA』5 pin port to plug into CoolerMaster PSU, 15 Pin SATA port to plug into hard drive, riser card or other devices with SATA port; | 『Connector』Connector A: 5 pin male ( Only compatible with Cooler Master PSUs with single 5 pin port as listed ), Connector B: 3x SATA 15 pin female; | 『Compatibility』Only compatible with Cooler Master PSUs with single 5 pin port such as: V550 V650 V750 V850 V700 V1000 V1200 Semi modular M520/M620 ,etc.，Corsair semi-modular HX520W/HX620W/HX650W; | 『Parameter』Gauge: 1007-18AWG(standard tin-coating copper wire), Length(including connectors): main 20inches(50cm)+secondary 6inches(15cm)+thridary 6inches(15cm) ,Between 2 SATA: 6 inches(15cm), Quantity: 1pcs, Self-adhesive tape*1pcs; | 『Note』This cable was only designed for some types of Cooler Master PSUs listed in the 3rd point, not compatible with other brand PSUs or types. If you use other incompatible brand PSUs or types, it will definitely burn or damage the hard drive and we won’t take any responsibility for wrongly using or installing. Please carefully check the compatible types and contact us if you are not sure if it supports your power supply;

『8 Pin to 4 Pin CPU Power Adapter』Offering the best solution to get the extra power overclocking required; | 『CPU 8P FM - CPU 8P M + ATX 4P』CPU 8 pin female end to plug into the power supply, CPU 8 pin and 4 pin male ends to plug into the motherboard (It is availble to use the single CPU 8pin, single ATX 4 pin or both of CPU 8 pin + ATX 4 pin.); | 『Compatibility』Compatible with all PSUs - ATX, SFX, Fanless PSU. Compatible with motherboard that has 8-pin +12V socket, 4-pin +12V socket or 8-pin +12V socket and 4-pin +12V socket. (This cable is a common power supply Y-splitter extension cable, not converted cable. It supports all of power supplies with CPU 8 pin male port output.) | 『Parameter』Length(including connectors):9.5-inch(24cm)(approx), Gauge: 1007-18AWG(standard tin-coating copper wire), Quantity: 1pcs, Self-adhesive tape*1pcs; | 『Note』This cable is a common power supply Y-splitter extension cable, not converted cable. It only works with motherboard, not GPU. It will be damaged or burned once you plug it into GPU and we won’t take any responsibility for wrongly using or installing. Please carefully check the compatible types or contact us if you are not sure about it;

『ATX Power Jumper Cable』Allowing you to turn on/off your 24 pin/20 pin ATX power supply; | 『LED Indication』Illuminated Red LED light indicates that the power supply is on; | 『Parameter』Gauge: 1007-18AWG (standard tin-coating copper wire), Length: 21.5inches(55cm), Maximum power: 1000 watts, Quantity: 1pcs, Self-adhesive tape*1pcs; | 『Sleeved』With Braided Sleeves for easy cable management; | 『Note』The LED light is off when to connect with 20 pin ATX power supply;

『CPU 8 Pin Extension Cable』ATX 8 pin female end to plug into the power supply, CPU 8 pin(4+4) male end to plug into the motherboard; | 『Connector』Connector A: ATX 12V 8 pin female, connector B: CPU 8 pin(4+4 Detachable) male (Detachable CPU 8 pin(4+4) end could be used as EPS ATX 8 pin or P4 ATX 4 pin by sliding on/off the 4 pin.); | 『Compatibility』Compatible with power supplies with ATX 8 pin port;(Offering best solution to convert the old-type power supply's ATX 8 pin 12V connector into CPU 8 pin 12V connector.) | 『Parameter』Length(including connectors): 13-inch(34cm)(approx), Gauge: 1007-18AWG(standard tin-coating copper wire) Rated power: 400W, Quantity: 1pcs, Self-adhesive tape*1pcs; | 『Note』This cable was only designed for motherboard, not GPU(Graphics Card). It will be damaged and burned once you plug it into GPU and we won't take any responsibility for wrongly using or installing. Please check the compatible types or contact us if you are not sure about it;

『CPU Cable for Corsair PSUs』(Do not work with GPU(graphics card)) CPU 8 pin male end to plug into the power connector of power supply (NOTE: 8 pin male connector is ATX 8 pin, not pci-e 8 pin.), CPU 8 pin (4+4) male end to plug into the Motherboard.(NOTE: the 8 pin end and 4+4 pin male ends cannot be used interchangeably); | 『Only designed for motherboards, it doesn't work with graphics vedio cards』Compatible with motherboard with ATX 4 pin or 8 pin port (Detachable CPU 8 pin(4+4) end could be used as EPS ATX 8 pin or P4 ATX 4 pin by sliding on/off the 4 pin.); | 『Compatibility』Only compatible with Corsair modular power supply such as : AX760I/AX860I/AX1200I/AX1500I/AX760/AX850/AX860/HX1200I/HX1000I/HX850I/HX750I/RM1000I/RM850I/RM750I/RM650I/RM1000X/RM850X/RM750X/RM650X/RM550X/RM1000/RM850/RM750/RM650/RM550/RM450/SF750/SF600/SF450/HX750/HX1200/TX850M/TX750M/TX650M/CX750M/CX650M/CX550M; (NOTE: Do not work with AX1200 and EVGA PSUs.) | 『Parameter』Length(including connectors): 25-inch(63cm), Gauge: 1007-18AWG(standard tin-coating copper wire), Quantity: 1pcs, Self-adhesive tape*1pcs, (NOTE: Do not work with GPU.); | 『Note』Do not work with GPU(graphics card). This cable does not work with EVGA PSUs. It was only designed for some types of Corsair PSUs as listed. If you use other incompatible brand PSUs or types, it will definitely burn or damage the motherboard and we won’t take any responsibility for wrongly using or installing. Please carefully check the compatible types or contact us if you are not sure if it supports your power supply;

『CPU Cable for Corsair PSU』(Do not work with GPU(graphics card)). CPU 8 pin male end to plug into the power connector of power supply; CPU 8 pin (4+4) male end to plug into the Motherboard.(NOTE: the 8 pin end and 4+4 pin male ends cannot be used interchangeably); | 『Compatible with Corsair Modular PSU』AX760I/AX860I/AX1200I/AX1500I/AX760/AX850/AX860/HX1200I/HX1000I/HX850I/HX750I/RM1000I/RM850I/RM750I/RM650I/RM1000X/RM850X/RM750X/RM650X/RM550X/RM1000/RM850/RM750/RM650/RM550/RM450/SF750/SF600/SF450/HX750/HX1200/TX850M/TX750M/TX650M/CX750M/CX650M/CX550M; (NOTE: Do not work with AX1200 and EVGA PSUs.) | 『Compatibility』Compatible with Thermaltake Modular PSUs: RGB GOLD/ RGB PLATINUM/ ARGB GOLD/ Toughpower GF1 PF1 TF1 GF3 SFX. ARESGAME Modular PSUs: AGK750/ AGK850/ AGT1000/ AGS750/ AGS850.Compatible with Pystar PSU: ES850/ ES1000. | 『Note』Do not work with GPU(graphics card). This cable does not work with EVGA PSUs. It was only designed for some types of Corsair PSUs as listed. | 『Parameter』Length(including connectors): 27inch+17inch (69cm+19cm), Gauge: 1007-18AWG(standard tin-coating copper wire), Quantity: 1pcs, Self-adhesive tape*1pcs, (NOTE: Do not work with GPU.);

『Mini 6P - SATA』Mini 6 Pin port plugs into the motherboard (NOTE: It is mini 6 pin port, not standard 6 pin port.),15 Pin SATA port plugs into the hard drive; (Note: Please carefully check your 6 pin port is mini or standard before placing the order) | 『Connectors』Connector A: ATX 12V mini 6 pin (NOTE: It is mini 6 pin port, not standard 6 pin port.), Connector B: SATA 15 pin (compatible with the equipment with sata port such as: liquid CPU cooler, mechanical hhd and ssd); | 『Compatibility』Compatible with DELL Inspiron series such as: 3653 3650 3655 3250 3252 3268 3660 3667 3668 3670 V3668;( Note: Do not support the DELL OptiPlex series such as 3020 3046 5040 7020 7040 9020 SFF T1700; ( Please purchase the mini 8 pin to SATA adapter for DELL OptiPlex series, the Asin is B07Z2GBR25 ).) | 『Parameter』Gauge: 18AWG with braided sleeves for easy cable management, Length(including connectors): 15 inches(38cm), Self-adhesive tape*1pcs; | 『Note』This cable was only designed for some types of DELL Inspiron series as listed. If you connect it with other incompatible motherboards, it will burn or damage the motherboard and we won’t take any responsibility for wrongly using or installing. Please carefully check the compatible types or contact us if you are not sure about it;

『Molex - CPU 8P(4+4)』4 Pin molex port to plug into the ATX Power Supply, CPU 8 Pin(4+4) port to plug into the motherboard (Note: The CPU 8 pin (4+4) end could not be split into 4 pin to use.); | 『Solution』Offering best solution to convert the old-type power supply's molex connector to EPS-12V CPU 8 pin male; | 『Compatibility』Compatible with power supplies with molex port output & motherboards with ATX 8 pin port; | 『Parameter』Length(including connectors): 13-inch(33cm)(approx), Gauge: 1007-18AWG(standard tin-coating copper wire) with braided sleeves for easy cable management, Quantity: 1pcs, Self-adhesive tape*1pcs; | 『Note』This cable was only designed for motherboard, not GPU(Graphics Cards). It will be damaged and burned once you plug it into GPU and we won’t take any responsibility for wrongly using or installing. Please check the compatible types or contact us if you are not sure about it;

『SATA Power Cable for Corsair PSUs』ONLY compatible with some specific types of Corsair PSUs including Corsair RM / RMX / RMi / HX / HXi / CX / CX-M/ CS/CS-M / SF / TX / AXi / AX series(NOTE: Do not work with AX1200, AX750 and AX850.); | 『Note』The cable was only designed for the brand and model as listed in the 1st Point. Using the cable with unsupported PSUs will definitely damage the PSUs, hard drives or other devices. Please do not use with any makes or models not listed in our compatibility list. Please carefully check the compatible types before purchasing and contact us if you are not sure if it supports your power supply; | 『6P - 15P SATA』6 pin port to plug into Corsair PSU, 15 Pin SATA port to plug into hard drive, riser card or other devices with SATA port;(Note：There is no guarantee if you use this cable for mining.) | 『Connector』Connector A: 1x 6 pin male (only for some specific types of CORSAIR PSUs as listed in the 1st point), Connector B: 3x 15 pin SATA female; | 『Parameter』Gauge: 1007-18AWG(standard tin-coating copper wire), Length(including connectors): main 20inches(50cm)+secondary 6inches(15cm)+thridary 6inches(15cm) ,Between 2 SATA: 6 inches(15cm), Quantity: 1pcs, Self-adhesive tape*1pcs;

『SATA Power Cable for Dell Inspiron 3653 3650 Series』Mini 6 Pin port plugs into the motherboard ( NOTE: It is mini 6 pin port, not standard 6 pin port. ), 15 Pin SATA port plugs into the hard drive; | 『Connectors』Connector A: ATX 12V mini 6 pin (NOTE: It is mini 6 pin port, not standard 6 pin port.), Connector B: 2x Right-angle SATA 15 pin, please note that the sata port is right-angle (compatible with the equipment with sata port such as: liquid CPU cooler, mechanical hhd and ssd); | 『Compatibility』ONLY compatible with DELL Inspiron series such as: 3653 3650 3655 3250 3252 3268 3660 3667 3668 3670 V3668; ( Note: Do not support the DELL OptiPlex series such as 3020 3046 5040 7020 7040 9020 SFF T1700; It doesn't work with DELL Vostro Series. ) | 『Parameter』Gauge: 18AWG with braided sleeves for easy cable management, Length(including connectors): 14.5 inches(37cm)，Between 2 SATA: 2.36 inches(6cm), Self-adhesive tape*1pcs; | 『Note』This cable was only designed for some specific types of DELL Inspiron series as listed. If you connect it with other incompatible motherboards, it will burn or damage the motherboard and we won’t take any responsibility for wrongly using or installing. Please carefully check the compatible types or contact us if you are not sure about it;

『SATA Power Cable for Hikvision Video Recorder』4 pin port connects to video recorder, SATA port connects to hard drive HDD; | 『Connector』Connector A: 4 pin, Connector B: SATA female; | 『Compatibility』Only compatible with Hikvision video recorder such as:7100 series,D1 series(D1-108C),N1 series(N1-104),71 series(7104,7108,7116),DS76 series(DS7604n-e1/4p),DS78 series(DS7804n-k1),7808hgh,7816hgh,5108h,5116h,DH-NVR4208,NVR4216,2116H, 3100 series(DH-DVR3104); | 『Parameter』Gauge: 1007-18AWG(standard tin-coating copper wire), Length(including connectors): 13inches(33cm), Quantity: 2pcs, Self-adhesive tape*1pcs; | 『Note』This cable only works with Hikvision video recorder as listed. If you use other incompatible devices, it will definitely burn or damage the hard drive and we won’t take any responsibility for wrongly using or installing. Please carefully check the compatible types and contact us if you are not sure if it supports your power supply;

『Short USB C to USB C Cable』The short USB C to USB C Cable supports multiple tasks, which supports device requirements ranging from 5V/3A to 48V/5A (up to 240W) and can connect Thunderbolt/USB4 docking stations to high-definition displays, allowing you to experience vivid 8K videos.( Note: The transmission speed of data and video also depends on the support of USB C devices.) | 『Upgrand 40Gbps Data Transfer』Providing up to 40Gbps data transfer speed and 8K video output, which supports device synchronous input and output, and bidirectional charging. (Note: The charging speed also depends on whether the charger and USB device support fast charging.) | 『Flat & Flexible FPC Design』The flexible flat USB C cable adopts FPC wire (flexible technology), which making the cable super flexible and durable, lightweight, small in size, space saving, and easy to bend and use. | 『Short & Easy carry』The short USB C cable has a length of 4 inches (10 cm), making it perfect for travel and work. It is free of tangles and easy to carry. | 『Compatibility』The short USB C to USB C cable compatible with Steam Deck, ROG Ally, Nintendo,Switch,Laptops, Ipad, MacBook,Smartphones, Dell XPS, Surface, Chromebook, Samsung, Google, Huawei, MOTO, LG G5, Nexus,Power Banks with USB-C interfaces, etc;

『USB 2.0 to USB 3.2 Gen 1 Header Adapter』Save money by keeping your old motherboard and simply plugging in our USB 2.0 Internal adapter, which is fully compatible with USB 3.1/3.2 Type-C (20-Pin) A-Key Mainboard Headers. | 『180-degree & Slim Design』It features the 180-degree and slim design, which avoids assembly interference caused by the position of the motherboard connector or the internal structure of the chassis. Dimension(L*W*H): 0.94*0.51*0.19in(24*13*5mm). | 『Compatibility』Upgrade your computer's USB capabilities with our TYPE E KEY-A FEMALE FRONT PANEL SOCKET TO 9PIN MAINBOARD HEADER EXTENSION ADAPTER, which is designed to be simple, effective, and affordable. | 『Plug and Play』Enjoy plug-and-play convenience with our USB 3.1/3.2 Type-C (20-Pin) A-Key Mainboard Header adapter, perfect for upgrading your internal USB connections, making it easy to install and use. | 『Data Transfer』Experience lightning-fast data transfer speeds with our USB 3.1/3.2 Type-C (20-Pin) A-Key Mainboard Header adapter, perfect for those who demand the best.

『USB 3.2 Gen 1 to USB 3.2 Gen 2 Header Adapter』Providing a convenient solution for converting the available USB 3.0 header of a motherboard into a USB 3.1 header; | 『Connectors』Connector A (motherboard): USB 3.0 internal 19/20 pin motherboard male housing header, Connector B (front panel): USB 3.1 A-Key 20 pin front panel female header; | 『Compatibility』Compatible with all of common motherboards with USB 3.0 internal19 pin header. (Note: Does not work with USB 2.0 header.) Support systems: WINXP/WIN7/WIN8/WIN10 32/64BIT/MAC/Linux, Plug and Play(Do not need to install drivers.); | 『Parameter』Dimension(L*W*H): 23*11*19.5mm(0.9*0.44*0.77in), Gauge: premium high-performance black PCB, Data transfer speed is up to 10Gbps, plug and play(Do not need to install drivers.), Quantity: 1pcs, Self-adhesive tape*1pcs; | 『Note』Not compatible with USB 2.0 motherboard IDC connector. Must install the adapter step by step to avoid shorting pins and motherboard damage. Please remove power cable and wait 10 seconds before installation.;