『Compatibility』Compatible with HP Z200/Z210/Z220/Z230/Z240 server workstation motherboard which has 6 pin port, HP ProDesk 600 G1/G2 SFF,690 G1 SFF, HP EliteDesk 800 G1/G2,600/880 G1 SFF/TWR, HP Compaq SFF/MT/CMT Series (4000/4300/6000/6005/6060/6080/620/628/6300/6305/6380/8000/8080/8100/8180/8200/8280/8380) | 『Best Solution』Allowing you to convert standard 24 pin ATX power supply to 6 pin HP server workstation connector. The updated cable eliminates the fan error beep.(Note: It maybe cause the "fan error " when to use it on the HP Elite Desk G2/HP Prodesk 600 G2 micro tower type.); | 『24P-6P』24 Pin end to plug into the standard 24 pin ATX Power Supply, standard 6 Pin and small 6 pin P2 ends to plug into the HP motherboard; (NOTE: Please refer to image 4th to confirm if it works with your pc type, and don't forget connecting the ATX 4 pin cable of your replaced power supply to the CPU 4 pin port on your motherboard.) | 『Parameter』Gauge: 1007-18AWG (standard tin-coating copper wire), Length: 13.3 inches(34cm), Maximum power: 1000 watts, Quantity: 1pcs, Self-adhesive tape*1pcs; | 『Note』Please carefully check the image of original P2 connector with wires. It was only designed for some types of HP PCs as listed. If you connect it with other incompatible types, it will burn or damage the motherboard. Please carefully check the compatible types before placing the order or contact us if you are not sure about it;