This is a high quality projector wick, high brightness, long life, excellent visual effects, so that you can experience the same hd images as the cinema at home.
Bulb model: ELP-LP78//V13H010L78
Working hours : 4000 hours
Warranty period :200 days
Bulb type: Projector Lamp Bulb with housing
Applicable model:For EPSON CB-X03 EB-945 EB-955W EB-965 EB-995W EB-S03 EB-S120 EB-S17 EB-S18 EB-S200 EB-W03 EB-W120 EB-W18 EB-W22 EB-W28 EB-X03 EB-X120 EB-X18 EB-X18+ EB-X20 EB-X200 EB-X24 EB-X25 EH-TW490 EH-TW5200 EH-TW570 EX3220 EX5220 EX6220 EX7220 EX7230 PRO S18+ VS230 W15+ W18+ X24+ PowerLite Home Cinema 1222 1262W 955W 965 97 98 99W 2000 2030 725HD 730HD S17 W17 X17

When to change projector bulbs:

When the projector indicator light flashes orange, the projected image becomes darker or blurrier than before.When the projector is on, the message to change the light bulb will appear on the screen. In order to get a good projection effect, it is recommended that you change the light bulb.

How to replace projector bulbs:
1. Turn off the projector and unplug the power cord
2. Let the projector cool for at least an hour. The bulb is very hot after use
3. Use a screwdriver to remove the screws from the lid and slide the lampshade open
Loosen the two screws holding the bulb in place
5. Hold the bulb and pull it out straight
6. Use the opposite steps to place the new bulb back in the projector and tighten the screws
7. Reinstall the lampshade and reset the life of the bulb
8. Installation is complete

Note:
1. Before purchase, please confirm that the bulb of this projector is compatible with the projector. If you cannot find the model of the projector on the page, please contact us
2. To avoid burns, allow the projector to cool for at least 60 minutes before changing the bulb