The DJI High-Bright Remote Monitor is integrated with a wide color gamut display and image transmission receiver and can be used for monitoring, remote parameter adjustment, and remote control via wireless/wired image signals. When used with the Remote Monitor Expansion Plate, outputs of HDMI and SDI signals can be achieved. | Overview - With a 7-inch wide color gamut, 1,500-nit high-bright touchscreen, and an integrated O3 Pro image transmission receiver, the DJI High-Bright Remote Monitor can be used for monitoring, recording, and playback. It also works seamlessly with the Hand Grips, DJI Master Wheels, DJI Force Pro, and the new DJI Three-Channel Follow Focus to remotely enable focus control, high-precision gimbal control, starting/stopping of recording and adjustment of camera parameters. In addition, the built-in gyro sensor turns the monitor into a remote motion controller*. DJI High-Bright Remote Monitor must be used with the DJI Ronin 4D Video Transmitter. | Highlights - 1,500-nit high-bright monitor, 7-inch wide color gamut touchscreen display, Output of HDMI and SDI signals, Mirror Control Mode*, Independent recording and playback*, Remote parameter setting, remote control, Motion control*, Customizable LUT and independent LUT for monitoring, Focus assistance and exposure assistance, Independent monitoring of HDMI input*, * Supported later. | In The Box : High-Bright Remote Monitor x1, Remote Monitor Hood x1, NP-F Battery Adapter (RX) x1, WB37 Intelligent Battery x1, WB37 Battery Charging Hub(USB-C) x1, 1.5mm Ball-End Hex Key x1 | The DJI High-Bright Remote Monitor MUST be used with the DJI Ronin 4D Video Transmitter/DJI Video Transmitter. If you have not yet purchased a transmitter, it is recommended to purchase the Transmission (High-Bright Monitor Combo) directly. | Compatibility: DJI High-Bright Remote Monitor, DJI Ronin 2, DJI RS 3 Pro, DJI Video Receiver, DJI LiDAR Range Finder (RS)