This breakout box is distributed on compatible with 2X Lemo 2 pin and 1X fischer 3pin outputs with a configurable cable connector. | 0B 2pin to 1 to 3 Mini Power Splitter cable | Cable length: 20cm (other length you need,please contact us customized) | Includes (2) 1/4-20 Socket Cap screws for mounting to camera or accessories. | Note: This is a passive device with no fuse or regulation.

Contact Type: Solder | Brass (chrome plated) shell and collet nut, nickel plated brass latch sleeve and mid pieces | Contacts: 2 3 4 5 6 7 9Pins(freely to select Plug & Socket or both) | Pin system, G pin as the standard for on-connector. | Industry Application: It is widely used on all kinds of medical equipment's, specially for the signal transmission, Medical Equipment ,Audio / Video, Test and Measurement, Communications product line

Materials: Aluminum-alloy, stainless steel, ABS Plastic. | Splitter Size:70mm*25mm*18.4mm. with ¼”-20 screw holes and ronin 2 screws on middle easy to mount on the Camera accesories. | Three female PowerTap receptacles expand from any Gold Mount PowerTap to accomodate 3 separate devices. | Cable length:about 45CM (other length you need,please contact us before order) | with this 14.8V hub is perfet for running a BlackMagic Production 4k, Tilta handle and motor , cameras,multiple wireless systems, Monitor, follow focus, on board light, on board recorderMovis/Ronins , etc

Plug A：3.5mm TRS jack | Plug B：FGG 9pin connector（Right angle also avaliable） | Connect Tentacle Sync Timecode Generator to RED KOMODO or RED V-Raptor Digital Camera | Cable length：about 45CM（other length can contact us customied） | Cables fabricated with the highest quality components and are 100% continuity tested.

Connector A:Dual Neutrik 3pin XLR female connectors | Connector B:right angle 0B 6PIN Male dual key connector (input port to connect to the ALEXA Mini LF) | Cable Length:about 60CM.（other length can be customized） | The audio cable connects 3-pin balanced output to the balanced 6-pin input on the ARRI ALEXA Mini LF camera. | Cables fabricated with the highest quality components and are 100% continuity tested.

Connector A: True 75 Ohm Male Micro HD BNC | Connector B: True 75 Ohm Standard BNC Female | Cable Length:30CM,60CM,1M,2M are avaliable (other length can be customized) | Application: for Video Assist 5" 3G and 12G Blackmagic Design monitors, | 12G Rated Standard BNC Female to High Density Micro BNC cables are designed for professional broadcast applications. It is used as a transmission line for frequency signals.

Connector A: Standard Male D-tap / P-tap | Connector B: DC 5.5x2.5 mm Plug Angled | Source power from Gold Mount batteries, Gold Mount Plates, V Mount batteries and from cameras with on-board d-tap output | Lanparte BMPCC Power Supply Cable For Black Magic Camera/ DSLR Rig Power V-Mount Anton Battery | Cables fabricated with the highest quality components and are 100% continuity tested.

Panel Thread Diameter:28mm，Cable Range :12-15mm.Wire Size for solder: ≤6mm² /10AWG,Contact Diameter: Φ3.6mm | Waterproof Level : IP68 ;Rated Current / Voltage : 45A/ 380V; Test Voltage min : AC 1500V；Resistance: 0.5mΩ. | easy and simple to operating,small bulk,light weight complete specification. | The connectors can be used for cable to panel-mount connections. Each side can be male or female contact, (Plug or socket versions). | 2pin to 26pin to choose.Different pins please refer to the left attached Parameters drawings.

Connector A: RJ45; Connector B: M12 D-code 4pin Male | Used to connect M12 devices used in industrial Ethernet and Fieldbus applications | IP68 rating ensures protection from liquid moisture and fine particulates | Cable Length：1M /3M/5M/8M/10M available(other length you need,you can contact us to customize.) | Applications: Industrial Ethernet ,Fieldbus ,Device level connectivity, Factory automation ,Process industry application

Connector A: RJ45; Connector B: M12 D-code 4pin Male | Used to connect M12 devices used in industrial Ethernet and Fieldbus applications | IP68 rating ensures protection from liquid moisture and fine particulates | Cable Length：1M /3M/5M/8M/10M available(other length you need,you can contact us to customize.) | This M12 to RJ45 patch cord is ideal in industrial Ethernet applications such as in machinery, assembly lines and other manufacturing applications where industrial grade cat6 network cable is needed.

NP-F550/ NP-F750/ NP-F970 Dummy Battery to datp Adapter cable | This adapter is useful for powering a wide range of devices from a d-tap power source like a V-lock battery /Battery Mount. | Attention : Power input voltage 10-24V, output voltage 8V 4A;cable length:70CM. | Suitable for NP-F series battery,NP-F550/570/750/770/960/970,etc power FW279 monitor and Sony FS700. | works for photograpich lamps, lights, Atomos Ninja V monitor

Input: PD USB-C 9V/2A; Output: DC 8.4V 2A | Compatible model: for Sony A7, A7R, A7S, A7M, A7II, A7S2, A7M2, A7R2, A6500, A6400, A6300, A6100, A6000, A5100, A5000, A3000, NEX5, NEX7, DSC-RX10 and Other Digital Cameras | Cable length: about 35CM-90CM | Applicable power supply: QC3 / 4 / PD standard Power Bank required PD 9V or 12V protocol output. | The USB-C PD system can replace traditional AC adapters or heavy grips or batteries, it allows you to power your camera using the external powerbank/charger with USB 3.1 Type-C output to achieve long time shooting, no need to replace camera battery frequently.

Input: PD USB-C 9V/2A; Output: DC 8.4V 2A | Compatible for Fujifilm X100F X100V X-S10 X-A1 X-A2 X-A3 X-A5 X-A7 X-A10 X-A20 X-E1 X-E2 X-E2S X-E3 X-H1 X-M1 X-Pro1 X-Pro2 X-Pro3 X-T1 X-T2 X-T3 X-T10 X-T20 X-T30 X-T100 X-T200 HS30EXR HS33EXR HS35EXR HS50EXR Cameras. | Cable length: about 35CM-90CM | Applicable power supply: QC3 / 4 / PD standard Power Bank required PD 9V or 12V protocol output. | The USB-C PD system can replace traditional AC adapters or heavy grips or batteries, it allows you to power your camera using the external powerbank/charger with USB 3.1 Type-C output to achieve long time shooting, no need to replace camera battery frequently.

The BP battery mount can be mounted on to the back of LCD monitor / Power supply station / steadicam / power plate. It is for Sony BP battery with v-mount and D-tap connector input. It is a device which can connect the battery and videoing devices together. | Mount Type: Sony V-shoe Mount | Can power an onboard camera light or broadcast accessory. | DC Output: 1 D-Tap connector (Power Tap) | Compatible with: V mount Batteries