Can replace the original VMC-MM1. Function exactly the same | 1m plus long line for remote operation, suitable for multi-scene shooting | Only for Sony tripod handles and cameras, not for other brands

"2.5/3.5mm plug into the remote control, basically applicable to all brands of shutter remote control on the market. | S2 is a standard plug device (Multi 15pin usb). It matches the mother port on the camera. | The line length is extended to 118 inches /300cm, suitable for indoor and outdoor selfie family photos or water photography and other remote shooting work. | Please first confirm to measure the port size of the camera remote control you have before purchasing. | After the cable is received, plug it into your shutter release remote control and use it directly. Support focus, photo power

"2.5/3.5mm plug into the remote control, basically applicable to all brands of shutter remote control on the market. | S2 is a standard plug device (Multi 15pin usb). It matches the mother port on the camera. | The line length is extended to 118 inches /300cm, suitable for indoor and outdoor selfie family photos or water photography and other remote shooting work. | Please first confirm to measure the port size of the camera remote control you have before purchasing. | After the cable is received, plug it into your shutter release remote control and use it directly. Support focus, photo power

This is an ordinary shutter release remote control, replacing the shutter button on the camera with the same function, half press the focus, press the photo | The product is very small and light, easy to carry， Product size: about 4cm * 2cm * 1cm /10G | The shutter socket of the camera is in the same direction as the camera lens, with a large circular port of 11pin | camera users note that some models can be set to use the shutter button to control video shooting (set the shutter button to REC), please read the details carefully. | The size buttons on the RC301 are all camera functions, the large button has two gears (half press to focus, press to take photos), and the small press to take photos and focus at the same time | The line length is available in two styles: 30cm/11.8 inches and 5 meters /196.8 inches to suit the different shooting needs of users | No battery required, no charging, take power from the camera (small power does not affect the power)

Release your hands and use your mouth to control the camera | The bite of the A main line is made of food-grade children's pacifier, odorless and non-toxic. | A main line with mechanical switch type, the other end is 3.5mm female seat. Can switch between different camera lines used | Main line length 50cm/19.6in,OD3.0mm pvc flexible cable | If damaged or damaged, you can also buy your own parts to manually replace the welding

Release your hands and use your mouth to control the camera | The bite of the A main line is made of food-grade children's pacifier, odorless and non-toxic. | A main line with mechanical switch type, the other end is 3.5mm female seat. Can switch between different camera lines used | Main line length 50cm/19.6in,OD3.0mm pvc flexible cable | for Fuji's fast door is on the right side of the camera (above the storage card / SD/TF card), printed with letters - "REMOTE"

Release your hands and use your mouth to control the camera | The bite of the A main line is made of food-grade children's pacifier, odorless and non-toxic. | A main line with mechanical switch type, the other end is 3.5mm female seat. Can switch between different camera lines used | Main line length 50cm/19.6in,OD3.0mm pvc flexible cable | If damaged or damaged, you can also buy your own parts to manually replace the welding

Release your hands and use your mouth to control the camera | The bite of the A main line is made of food-grade children's pacifier, odorless and non-toxic. | A main line with mechanical switch type, the other end is 3.5mm female seat. Can switch between different camera lines used | Main line length 50cm/19.6in 1pcs+ B cable 35cm 1pcs | If damaged or damaged, you can also buy your own parts to manually replace the welding

Support control camera functions: take photos, start/stop recording, trigger autofocus, electronically controlled focus, adjustable parameters (aperture, shutter, ISO), Ronin image transmission | Make sure that the RSS port on the stabilizer is used to connect the camera cable, other USB C ports are different Do not mix. | Applicable stabilizer: DJI Ronin-rsc2,rs2,rs3,rs3 mini,rs3 pro,rs4,rs4 pro. Camera brand models that support control: A)for canon :EOS(6D,6D Mark II,5d Mark III,80D,800D,70D,77D,750D,650D | To achieve the functions described by the stabilizer official, please read the details and Settings written in the product carefully Dharma | The cable is extended to 35cm/13.7in. The camera can be placed vertically and horizontally on the stabilizer to meet various angles of shooting. | For better compatibility with camera functions, update the firmware of the stabilizer to the latest version.

You can adjust the camera 'LV' to the video file, and then enter the camera menu to set the "shutter release button for video/animation to record"; You can use DJl to control the video action | After the cable is plugged in, the DJl stabilizer is turned on and can be used without setup. Half press the red button of the DJI - camera focuses, press all the way to hold stop for 2 seconds - camera snaps. | How to operate: Tap (half press) the red button on the DJl to control the focus of the camera, press (press to the end) and hold for 3 seconds - take the photo | Pull the camera "LV" in the lower right corner of the camera to the video symbol, and then enter the menu(MENU), "Custom Settings Menu" -f Control - Select the "Camera" icon - Shutter Release button -Record video | Some cameras such as d7100,d7200,d750,d7500,z6ii,in the camera menu click - Custom - Animation - Specify shutter release key - Animation Recording. We can control the video with the stabilizer

How to operate: Tap (half press) the red button on the DJl for 3 seconds to control the camera shooting. Attention! Not to the bottom. If the camera does not respond, adjust the camera lens to MF/M and try again manually. | It can only support control photography, not half press focus (some camera models need to be set to record). After the cable is plugged in, the DJl stabilizer is turned on to directly control the photo without setting it up. | When using D750, please push the plug to the end, otherwise it will have bad contact and no reaction. | Pull the "LV" in the lower right corner of the camera to the video symbol, and then enter the menu (MENU)"Custom Settings Menu" -f Control - Select the "Camera" icon - Shutter Release button - Record video | Some Nikon cameras can use the video function after setting the camera. Respectively - D7100,D7200,D750,D600,D610,D7500 Set the camera - "Shutter Line Settings" - REC, you can control the recording of video

The line length is extended to 35mm/13.8in, and the camera can be upright for portrait shooting. | In order to better operating experience, the Settings of each brand of camera are listed, please check carefully. | The port of DJI's Ruying S stabilizer is on the left side of the express board, and the jack with RSS words is silkscreen printed | After plugging in the cable, power on the stabilizer first, then turn on the camera to communicate. | If there is no response, turn off the camera power and turn it on again

Apply to the camera:for sony a7,a7m2,a7m3,a7m4,a7s,a7s2,a7s3,a7r,a7r2,a7r3,a7r4,a6000,a6100,a6300,a6400,a6500,a6600,a9,a9ii.ZV-1 | Make sure that the RSS port on the stabilizer is used to connect the camera cable, other USB C ports are different Do not mix. | Applicable equipment: DJI stabilizer（Ronin-sc,Rsc2,Rs2,Rs3,Rs3 PRO,RS4,RS4 PRO,DJI Focus Pro)./Support control functions: focus, photo, video, zoom | To achieve the functions described by the stabilizer official, please read the details and Settings written in the product carefully Dharma | The cable is extended to 35cm/13.7in. The camera can be placed vertically and horizontally on the stabilizer to meet various angles of shooting. | For better compatibility with camera functions, update the firmware of the stabilizer to the latest version.

The line length is extended to 35mm/13.8in, and the camera can be upright for portrait shooting. | In order to better operating experience, the Settings of each brand of camera are listed, please check carefully. | The port of DJI's Ruying S stabilizer is on the left side of the express board, and the jack with RSS words is silkscreen printed | After plugging in the cable, power on the stabilizer first, then turn on the camera to communicate. | If there is no response, turn off the camera power and turn it on again

Applicable stabilizer: DJI Ronin-rsc2,rs2,rs3,rs3 mini,rs3 pro,rs4,rs4 pro,DJI Focus Pro. Support control camera functions: take photos, start/stop recording, trigger autofocus, electronically controlled focus, adjustable parameters (aperture, shutter, ISO), Ronin image transmission | Make sure that the RSS port on the stabilizer is used to connect the camera cable, other USB C ports are different Do not mix. | Camera brand models that support control: A)for canon :EOS 200D II,M50,M50 II,90D,850D.B) for nikon:D500,Z50, C )for sony :a6400,a6600,a9,ZV-1，ZV-E1 | To achieve the functions described by the stabilizer official, please read the details and Settings written in the product carefully Dharma | The cable is extended to 35cm/13.7in. The camera can be placed vertically and horizontally on the stabilizer to meet various angles of shooting. | For better compatibility with camera functions, update the firmware of the stabilizer to the latest version.

This camera control cable is used to connect your camera to the Camera Control Port of DJI RSC 2 for camera control. To control the camera's video recording and photo functions, as well as to trigger the autofocus function.

Function is exactly the same as the original cable | Available in 39 "and 197" lengths. Suitable for remote photography. | Suitable for SLR camera, body with 3-pin REMOTE port camera. Such as A58 A59,a99,a77,a580 | The port connection cable is suitable for use on the original VMT-VPR1,VPR10,VPR100 tripod handle and remote control. Function is the same as the original factory | pplicable equipment: for Sony original remote control, tripod handle. RM-VPR1, VCT- VPR1, VCT-VPR10, VCT-VPR100

After plugging in the cable, you can directly control the camerawith the DJl stabilizer. No setting | The N3 plug needs to be pushed to the bottom for normalcommunication.The type-c(UsB-C) plug is connected to the RsSport of the DJl | This RSS-N3 cable is just a camera release shutter cable thatreplaces the release button-like function on the camera body.Adjusting parameters on the camera via DJl is not supported. Onlytake pictures and videos | How to operate: Tap (half press) the red button on the Dl to focusthe camera. Press the camera for 3 seconds (all the way to thebottom) to take a picture | R5/R5C camera menu can be set "Shutter release button as REC"use DJl to control video actions

After plugging in the cable, you can directly control the camerawith the DJl stabilizer. No setting | The 3.5mm plug needs to be pushed to the bottom for normalcommunication.The type-c(UsB-C) plug is connected to the RSSport of the DJl | The 3.5mm female head can be used simultaneously with anexternal microphone | How to operate: Tap (half press) the red button on the DJl to focusthe camera. Press the camera for 3 seconds (all the way to thebottom) to take a picture | FP/FPL camera menu can be set "Shutter release button as REC"use DJl to control video actions

The camera port is a TRRS2.5mm small round hole, and thecamera jack is mostly on the right, above the SD card | After plugging in the cable, open the DJl stabilizer and you canuse it directly without setting it up | The RSS-P shutter cable, when connected to the DJl stabilizer,supports the same function as the shutter button on the camera | Panos camera video function, you need to adjust the camera tothe video file can be controlled | How to operate: Lightly press (half press) the red button on theDJl to focus the camera, press the red button all the way (pressthe bottom) to stop for 2 seconds -take a photo/video