【Plug and Play】Right out of the box this USB C to VGA adapter has no external software drivers required or power adapter needed. | 【Dual Monitors Setup simultaneously】HDMI and VGA port can work simultaneously, you can use USB C to HDMI and VGA at same time. ❗ Note: Under extend mode, you can only get two screen images, not three. | 【4K Resolution】this VGA to USBC-C adapter the HDMI port supports resolution up to 4k*2k@30HZ, 4 times clearer than 1080P, supports VGA resolution up to 1920X1200@60Hz, 9Gbps Bandwidth let you stream smoothing online gaming. | 【Port Compatible】This USB-C VGA multiport adapter can be used to connect a device to a USB-C-enabled monitor or display, Works with devices equipped with a USB-C or Thunderbolt 3 port. ❗ Note: Not all USB C device is compatible. | 【2 Years Warranty】Backed by an CableCreation 2-Years Limited Warranty and 24/7 online service support, please feel free to contact us for any questions or suggestions.

New design with vertical 90 degrees connecter for any types to mounting GPU | High Quality Solder Points and Gold plated Contacts for the Best Conductivity and Long Use | Extremely High speed cable allow PCI express video card in any direction on suitable position.Supports PCIE3.0/2.0/1.0, Doesn't Support PCIE4.0, Don't bend cable excessively, which will cause poor signal. | Foiled cable for High-frequency impedance and EMI design/ Golden plated contacts for best connectivity and long life | Compatible with most GPU/motherboard components One year warranty, buy with confidence

COMPATIBLE DEVICES: Personalized silicone protective case specially designed for YoTo Player (3rd Gen.). (Note: YoTo Player (3rd Gen.) is not included) | STRONG PROTECTION: This protective case is made of flexible silicone, soft to the touch, and equipped with a handle for comfortable holding, use this protective case to protect your YoTo Player from bumps and damage. Personalize your Yoto player and protect it from the wear and tear of everyday life. | PRECISE DESIGN: Our cases are manufactured to YoTo Player 1:1 scale, with precise hole locations to fit your YoTo Player perfectly. While protecting, it does not hinder the operation of the buttons and has a more open design at the speaker. | CHARGING FREEDOM: Featuring precise charger port cutouts that will not interfere with the operation of YoTo Player. There is no need to remove the protective cover to use the buttons normally when charging. The magnetic charging function at the bottom will also not be affected. | EASY INSTALLATION: Find the corresponding position and install it easily without any tools. After installation, you need to adjust the hole position to make the protective cover and the player fit better.

Double Layer Technology | 8.5GB Memory | Great for recording long movies | Great for backing up computers

✅【Fractal Magic Unleashed】Step into a realm of creativity with the Jorixxy 70mm Fractal Filter. Unleash the magic of fractals, adding a unique and mesmerizing touch to your photography and cinematic projects. | ✅【Foreground Blur Expertise】Elevate your visuals with expertly crafted foreground blur effects. The 70mm Fractal Filter by Jorixxy brings a professional touch to your compositions, blurring the foreground to draw attention to your subjects. | ✅【Film and Television Props Quality】Designed as film and television props, this filter meets professional standards. Whether you're working on a film set or a photography project, the special-shaped glass prism adds a distinctive flair to your visuals. | ✅【Versatile 70mm Size】With a 70mm size, this filter offers versatility for various creative projects. From intricate photography compositions to cinematic scenes, the Jorixxy Fractal Filter adapts to your creative vision. | ✅【Unlock Cinematic Brilliance】Elevate your storytelling with the Jorixxy Fractal Filter. Unlock cinematic brilliance by incorporating special-shaped glass prism effects into your visuals. Perfect for filmmakers, photographers, and creatives seeking to add a touch of magic to their projects.

High-Powered 240W Charging: Experience unparalleled speed as you power up your MacBook Pro 16" to 42% capacity within 30 minutes. | Charge Without Boundaries: From MacBook to iPad, Samsung phones, and beyond, this Anker USB-C cable offers a charging solution that suits a diverse range of devices. | Unbreakable Double Braided Nylon: Enjoy rapid charging and exceptional resilience with a 10,000-bend lifespan*, built to endure the rigors of daily use. | Secure Charging Guarantee: Charge with peace of mind using our USB-IF compliant cable, designed to meet the highest safety standards. | What You Get: Anker USB-C to USB-C Cable (10 ft, 2pack, 240W, Braided), welcome guide, our 24-month worry-free warranty, and friendly customer service.

【Perfect compatibility】 Compatbile For Gopro Hero 12/Hero 11/Hero 10/Hero 9/Hero 8/Hero 7/Hero 6/Hero 5/Hero 4/Hero 3/Hero session/Hero +/Gopro max/Gopro Fusion/AKASO/DJI osmo/Insta 360 Ace pro and more action cameras. | 【More applications】Chest strap mount for skiing, Hiking, Jumping, Play Sctoor, cycling, Ride a motocycle, snorkeling and more activity. | 【Breathable Material】Suptig Chest mount use Breathable and comfortable material, You can be worn comfortably during activities for a long time. | 【Easily Adjustable】Chest mount strap adjustable to fit a wide range of body types. | 【Include J-HOOK】Chest harnees mount include J-hook, You can take better angle videos and photos. to record those wonderful moment of your life,it can free your hand and maintain stable shooting status,it's excellent POV shooting tools. | 【What You Get】1x Suptig chest mount, 1x J-Hook, 1x Thumbscrew.

CONNECTIVITY - 3 ft. blue USB to RS-232 serial converter cable with clear USB jacket. Works by connecting the USB Type-A port into the host computer, and then connecting the RS-232 DB-9 male end to the female serial port. | LED INDICATORS - LED activity indicators for Power, TX and RX serial signals. The LED’s allow a visual indication of the signal activity as TX and RX RS-232 signals are communicating. | CHIPSET- FTDI Chipset Inside: FT232RL and Ultra Fast 920K ZyWyn ZT232E for superior operation in serial communication. | COMPATABILITY - With support on multiple OS platforms this makes our USB RS- 232 very versatile. Supported OS platforms are Windows 7, 8 and 10 as well as Linux and MacOS 10.X | WHY Gearmo? Your Trusted Partner based in the USA, Providing Advanced Engineering, Highly Reliable and Superior Built Products to handle the most demanding industries for over 20 years. Reach out to us for CAD, Mechanical Drawings and, Data Sheets

✔【CUSTOMIZABLE FOAM INTERIOR】Pre-cut foam squares allow for customizing the interior, Customize your internal space to fit snugly around your items with the included Pre-Cubed foam tray.Just remove pluckable foam to create the perfect storage for your items. | ✔【COMPACT TRAVEL DESIGN】This case features a premiun hard shell exterior constructed from durable plastics that will provide impact-resistance to your valuable contents. Exterior Dimensions: 8.6‘’ x 4.9‘’x 1.9‘’ - Interior Dimensions: 7.8‘’ x 3.9‘’ x 1.5‘’ . Case weight: 0.78 lbs. | ✔【PROTECTION AGAINST IMPACTS, DROPS, DINGS & DUST】Watertight, Airtight and Crush Resistant protection for your valuables. | ✔【SECURE STORAGE】This weather-resistant case is great for storing and protecting phone,EDC gears,flashlight, batteries, pocket knife and other small electronics on your trips like fishing, kayaking and cycling. | ✔【100% SATISFACTION GUARANTEE】We’re so confident that our products will meet or exceed your expectations, so we are offering a risk free, no questions asked, money back guarantee.If you have any questions, please feel free to tell us, we will try our best to satisfy every customer.

【Kindly Note】This keyboard is US Layout | 【Compatible Models】Compatible with Lenovo Legion Y520-15ikbn Y720-15ikb R720-15IKB(Compatible Lenovo Legion Y530-15ICH Y540-15IRH Y540-17IRH Y545 Y7000p) | 【Compatible Part No.】 AE08L018 SN20N0459118 SN20M27498 | 【Solution of keys don't work】If some keys don't work after install ,You can try to reconnect the ribbon cable in case bad connected ,pls use a dry cloth to wipe metal head of the connect ribbon,then try to connect about few times,many customer solve this problem after did this.

【Travel Router Case For GL.iNet】Protective router storage holder bag for GL.iNet GL-AXT1800, GL-MT1300, GL-SFT1200, GL-E750, GL-AR750S, GL-AR750, GL-MT300N-V2, GL-AR300M, GL-XE300, GL-A1300.There is enough space for your USB Cable, charger, SD Card U Disk / USB Mobile Disk or other accessories. | 【Comprehensive Protection】Made of supreme quality, durable EVA, crush resistant, anti-shock, water resistant material provides adequate protection from bumps, scratches and splashes. | 【Internal Mesh Pocket】Mesh pocket design provides an ideal storage space, allowing you to store USB Cable, Charger, SD Card, U Disk / USB Mobile Disk / Portable SSD Hard Drive or other accessories. | 【Durable Exterior Material】Polyester Fiber with soft pad inserted. The durable material can protect the device and accessories inside. The protection from the soft pad reduces the impact of falling and shocks. | 【Physical Features】External Size: 16.2cm*11.8cm*6.9cm / 6.3in*4.7in*2.8in (L*W*H) ; Weight: 138g / 4.87oz *** For sale is case only, router and accessories are not included *** | *** Please follow the provided video instructions for optimal positioning of the router and its accompanying accessories. ***

Compatible Space: The interior of this electronics organizer pouch in origami style, which allows you to open the bag 180° to take what you need, two large pockets for Nintendo Switch, power bank, hard disk and USB-C hub. Eight medium pouches are for your mouse, headset, watch, cords, chargers, 1 zipper pocket is for cards, tickets and travel essentials. 2 pen slots are for stylus pens | Lightweight Travel Accessories: The size of the tech organizer bag is 8.5" L x 5.5" W x 3.5" H, Compact and space-saving size fits perfectly into a backpack, briefcase, handbag or laptop bag, suitable for traveling use and daily organization | Keep Everything Organized: This travel tech organizer keeps all gadgets in one place and prevent wires from getting entangled. You can find travel accessories quickly, no tangled cords in your pack anymore | Durable Travel Essentials: Double zippers opening for easy and quick access, This cord organizer bag is well made of water-resistant fabric. Great organizer for office use and traveling, and keep your important devices within reach. (Electronics NOT included). It can serve as a travel checklist. Before you leave a place, just open the case and check if everything is there, preventing you from leaving things behind | Multipurpose: Its practicality and covenience makes it a travel essential bag. It is ideal for a weekend trip, business trip, and travel. This organizer pouch is perfect for office, business, daily use, outdoor activities, or as a gift to friends or family, on birthday, Valentine's Day, Christmas Day

VIVO Quick Adapter Solutions - Please be sure and check the model of your monitor before ordering!! This bracket is designed to fit only the following HP Monitor models: 27er, 27es, 27ea, 25er, 25es, 24ea, 23er, 23es, 22er, 22es, 22f, 23f, 24f, 24es, 25f, and 27f, 27fw. --Patented-- | Compatibility - Designed only for the HP models listed above, this adapter provides mounting solutions for monitors that don’t have VESA holes, allowing them to fit standard VESA mounts 75x75mm and 100x100mm. | Sturdy Construction - Solid all steel construction is designed to keep your monitor safe and secure at all times. | Convenient Mounting - Now that your compatible HP monitor has this adapter, you have mounting options! Find the VESA compatible stand that accommodates your workspace and enjoy comfortable viewing angles that improve the workday. | Easy Installation - Get your HP monitor mounted in no time with the simple thumb bolts that secure the bracket to any VESA compatible stand or wall mount.

Perfect companion for digital artists: Take your art to the next level and achieve professional results with the Paperlike Drawing Glove; compatible with any iPad and all other digital tablets so you can do your best work on any touch screen device. | Maximum comfort: Made from 100% flexible Polyester, Paperlike's Drawing Glove is lightweight and breathable; also created with an anti-sweat material that keeps your hand cool, dry, and comfortable while you create. | Anti-smudge, clean screen: The Drawing Glove protects digital screens from the transfer of skin oils and smudging; padded microfiber exterior works as a cleaning cloth, wiping the surface as you draw or write with your Apple Pencil or stylus. | Better control: The 2-finger glove has free fingertips that allow full use of multitouch gestures, giving you complete control over your digital canvas; reduces false inputs while writing and drawing on digital devices, eliminating palm rejection. | Perfect fit: The Drawing Glove by Paperlike fits both the right and left hand; rather than a one-size-fits-all, our glove is available in three different sizes (Small, Medium, Large), so you can find the perfect fit for your hand.

【Two Port HDMI Input】Supports two port HDMI input, allows users to connect 2 HDMI devices simultaneously and select one of them as the input source by a switch button. Avoid frequent plugging & unplugging operations | 【HDMI & RCA Cables Included】 No extra purchase needed, all cables are incldued in the package of this dual HDMI to RCA Converter. Plug the included power cable into any 5V USB ports to power on the converter after you set up the devices. | 【HDMI 1.3 1080P Input】With the integrated scaling technology, the maximum HDMI input resolution up to 1920 x 1080p/60hz. This 2 x HDMI to AV converter can automatically detect and convert HDMI signal into 480i or 576i Composite signal. Note: Not support 4k HDMI. | 【Widely Compatible】 This two port HDMI to Composite converter can be installed in minutes and fully-compatible with devices with HDMI output to display on older TVs, such as: DVD player, STB, PS3, PS4, HDMI TV stick, PC, and more. | 【Plug and Play】 No drivers needed, easy to install and operate. Lightweight and portable.

VIVO Quick Adapter Solutions - Please be sure and check the model of your monitor before ordering!! This bracket is designed to fit only the following Acer and Viewsonic Monitor models: R240HY bidx (does not fit R240HY Abmidx), SB220Q, RT240Y, R221Q, R271, R231bmid, RT270, G227HQL, G237HL, G247HYL, G257HL, G257HU, VX2276-smhd, VX2376-smhd, and VX2776-smhd. --Patented-- | Cable Management - The back of the bracket features an oval opening for cable management to give your setup a clean and organized display. | Solid Steel Construction - Solid all steel construction is designed to keep your monitor safe and secure at all times. | Compatibility - Designed only for the Acer and Viewsonic models listed above, this adapter provides mounting solutions for monitors that don’t have VESA holes, allowing them to fit standard VESA mounts 75x75mm and 100x100mm. | Easy Installation - Get your Acer or Viewsonic monitor mounted in no time with the simple thumb bolts that secure the bracket to any VESA compatible stand or wall mount.

Perfect companion for digital artists: Take your art to the next level and achieve professional results with the Paperlike Drawing Glove; compatible with any iPad and all other digital tablets so you can do your best work on any touch screen device. | Maximum comfort: Made from 100% flexible Polyester, Paperlike's Drawing Glove is lightweight and breathable; also created with an anti-sweat material that keeps your hand cool, dry, and comfortable while you create. | Anti-smudge, clean screen: The Drawing Glove protects digital screens from the transfer of skin oils and smudging; padded microfiber exterior works as a cleaning cloth, wiping the surface as you draw or write with your Apple Pencil or stylus. | Better control: The 2-finger glove has free fingertips that allow full use of multitouch gestures, giving you complete control over your digital canvas; reduces false inputs while writing and drawing on digital devices, eliminating palm rejection. | Perfect fit: The Drawing Glove by Paperlike fits both the right and left hand; rather than a one-size-fits-all, our glove is available in three different sizes (Small, Medium, Large), so you can find the perfect fit for your hand.

Designed ONLY to be compatible with MacBook Air 13 inch with Retina Display and Touch ID 2022 2021 2020 2019 2018 Release (Models: A2337 M1 A2179, A1932 - MGN63LL/A, MGND3LL/A, MGN93LL/A, MGN73LL/A, MGNE3LL/A, MGNA3LL/A, MWTJ2LL/A, MVH22LL/A, MWTL2LL/A, MWTK2LL/A, MVH52LL/A, MVH42LL/A, MVFH2LL/A, MVFM2LL/A, MVFK2LL/A, MVFJ2LL/A, MVFN2LL/A, MVFL2LL/A, MRE82LL/A, MREE2LL/A, MREA2LL/A, MRE92LL/A, MREF2LL/A, MREC2LL/A). WARNING: This case is NOT compatible with other model laptops. | Please kindly check the model number "Axxxx" on the back of the laptop before your purchase, make sure you choose the exact same model number as the listing title stated "A2337" or "A2179" or "A1932". | NO Cut Out design, transparency is different from color to color. Fully vented for safe heat disbursement, fully access to all buttons and features. Totally removable, easy to put on and take off that can protect your laptop from scrapes and scratches. | Case dimension: 12 x 8.5 x 0.62 inch, compatible with MacBook Air 13 inch with Retina Display & Touch ID with dimension: 11.97 x 8.36 x 0.61 inch (2022 2021 2020 2019 2018 Released). | Including 2 matching color keyboard covers (one compatible with MacBook Air 13 inch 2020 2021 2022 release model A2337 M1 A2179 and another compatible with MacBook Air 13 inch 2018 2019 release model A1932) & 1 screen protector to protect your keyboard & screen against spills. The small storage bag keeps mouse and earphone well-organized. 1 year warranty on case, keyboard cover.

📷Lightning+USB C+USB A Ports 3 in 1: This memory stick pro duo reader adopts Lightning+USB C+USB A three interface design and is compatible with various devices and operating systems. Whether your use i-Phone/i-Pad PC or other USB C phone device, you can easily connect and use this card reader. The 50cm cable provides enough space to connect different devices without obstruction. | 📷Multi Card Reader: The multi-card reader comes with CF/SD/TF/XD/MS five card slots. It supports a wide range of card types such as SDXC, SDHC, SD, CF, MS, Micro SDXC, and Micro SDHC. This design eliminates the need for separate card readers for each card format, thus saving both space and hassle. | 📷480Mbps Fast Transmission: Supercharge your file transfers with our XD card reader. Boasting a lightning-fast 480Mbps transfer speed, it swiftly moves your data, saving you time and improving productivity. Perfect for photographers, studios, and one dealing with large files. | 📷Plug and Play: The micro sd card reader plug and play, eliminates the need for additional drivers, providing a seamless user experience. Simply connect it and start transferring data effortlessly. Say goodbye to complicated setup processes and enjoy hassle-free file access, easily transfer photo video and file information. | 📷Slim & Compact Design: The ms card reader is made of aluminum material, which has good heat dissipation and long service life, and its compact design makes it easy to carry and use. Whether you need to transfer photos on the go or process data at the office, you can easily put it in your pocket or take it with you.

Wide Application: Fit for NMEA 2000 Networks, Lowrance Networks, Simrad Networks, B and G Networks, Navico Networks, for Garmin Networks. (2 Pack) Please confirm the model before purchasing. | Universal Design: For NMEA 2000 Certified, designed to fit tightly and firmly for a solid, long-lasting connection. 100% universal and compatible with other manufacturers' products. Easily connect additional displays, sensors, or other devices to your NMEA 2000 (N2K) backbone cable, no complicated operations are required. | IP67 Waterproof Connector: NMEA2000 T connector is designed with IP67 water resistance and has undergone strict water immersion experiments(Submersion in water, 1 meter for 24 hours). That means it can use in the sea or lake without worrying about getting rust or damage. | Build To Last: For NMEA 2000 T connector is made of high-quality ABS and metal material, which is durable and suitable for rugged conditions. This T connector is oil-resistant, seawater-resistant, fire retardant, and high-temperature resistant, you don’t have to worry about worrying about getting rust or damage during a long time of use. | 100% Satisfaction Guarantee: If you are not 100% satisfied with this T connector, please simply return it for a full refund in 30 days. Premium Support & 12-Month Warranty.

Designed ONLY to be compatible with MacBook Air 13 inch case M3 M2 2024 2023 2022 Release with Liquid Retina Display & Touch ID (models: A3113 & A2681 - MRXV3LL/A, MRXQ3LL/A, MRXN3LL/A, MRXT3LL/A, MXCV3LL/A, MXCT3LL/A, MXCR3LL/A, MXCU3LL/A, MLXW3LL/A, MLXX3LL/A, MLXY3LL/A, MLY03LL/A, MLY13LL/A, MLY23LL/A, MLY33LL/A, MLY43LL/A). WARNING: This case is NOT compatible with other model laptops. | Please kindly check the model number "Axxxx" on the back of the laptop before purchase, make sure you choose the exact same model number as the listing title stated "A3113" or "A2681" that be compatible with MacBook Air 13 inch case M2 & compatible with MacBook Air 13 inch case M3. Case dimension: 12 x 8.5 x 0.46 inch, compatible with MacBook Air M2 case, compatible with MacBook Air M3 case with liquid retina display & Touch ID with dimension: 11.97 x 8.46 x 0.44 inch (2022 2023 2024 Released). | NO Cut Out design, transparency is different from color to color. Fully vented for safe heat disbursement, fully access to all buttons and features. Totally removable, easy to put on and take off that can protect your laptop from scrapes and scratches. | 2 pack USB C to USB adapter plug the adapter USB Type-C end into laptop USB-C port, then connect another female USB 3.0 port to standard USB-A device, such as, mouse, keyboard, SSD and flash. Support OTG function to load USB flash disk directly. This USB Type-C to USB connector also support synchronous charging to your phone and tablet with data transfer speed up to 5.0Gbps. This USB-C to USB 3.0 converter is made of Zinc alloy with baking finished surface. | Including matching color keyboard cover & screen protector to protect your keyboard & screen against spills. This type C adapter will not affect Wifi signal or cause heat issue.

【Universal SSD Bracket Mount】This 1.5-inch-2.1-inch (52-70mm) adjustable spring clip bracket is compatible with Samsung T7 SSD, SanDisk 1T SSD, SanDisk 2T SSD. | 【Flexible Installation】The mount is equipped with a cold shoe that can be fixed on the bottom of the stand, so you can mount the SSD to the cold shoe adapter; or you can mount it to the camera cage via 1/4" screws. Spring clips on the side Can be stretched and quickly disassembled and installed | 【Rubber Pad】The bottom part of the SSD holder is equipped with a rubber pad, which can firmly fix the SSD in the clamp and prevent scratches. The knurled knob features a rubber pad to increase friction and prevent wobbling. | 【Sturdy Aluminum Alloy Material】Black anodized aluminum alloy resists damage and scratches. Weight is 2.48 oz (70.5 g), dimensions are 2.3"x1.74"x0.69" (79.5x58x23mm) | 【Cable Clip】The stand comes with a removable cable clip to secure the USB-C cable, and the knob moves the clip along the slot to align the USB port and lock it in place. This SSD mount is compact and versatile for photographers and videographers.

Designed ONLY to be compatible with MacBook Air 13.6 inch 2022 2023 2024 Newest Release Model: A2681 A3113 M2 M3 Chip with Liquid Retina display Fits Touch ID. Pls verify Model No. the underside of Notebook before buying. | Compatibility warning: This case is not compatible with MacBook Air 13 inch Older Model: A2337 M1 / A2179 / A1932 with Retina Display and Touch ID. | Case dimension: 12 x 8.5 x 0.46 inch, compatible with MacBook Air 13.6 inch M2 M3 case with dimension: 11.97 x 8.46 x 0.44 inch (2022 2023 2024 Released). Ultra slim light weight hard case has 8.7 oz in weight and 1.4 mm in thickness. Easy to use without adding weight. | Plastic Hard Case Material: Smooth Soft-Touch Finish ,Hard Shell Case with Rubber oil Paint for Rich Silky-smooth Soft-touch while Protecting your for Notebook from everyday scrapes and scratches. | Snap on design, Easy to install and disassemble and easy on and off,Fully vented for heat disbursement,Fully access to all ports and features, plug your charger, cable or headset without removing the case. Package Including keyboard cover, Dust plug and screen protector to protect your keyboard & screen against spills.

SFF-8644 to SFF-8088 Cable, 0.5-Meter(1.64ft). (Cable length contains two end connectors.) | AWG30 Twinaxial 8-pair high-bandwidth low-skew wire | Impedance = 100 Ohms, External cabling solution for connecting Mini-SAS to HD Mini-SAS devices | Guaranteed SAS 2.1 drive performance at 6.0 Gbps data rates per lane, Fully compliant to the latest SAS 2.1 AND SAS 3.0 interface specifications | Subject to Serial Attached SCSI 6.0 Gbps test certification before shipment

Sleek design, a case designed for texas instruments calculator graphing, fits perfectly. You can put the ti 84 graphing calculator in a hard case specially designed for the ti84 graphing calculator for easy portability when you go out. | This ti 84 plus ce graphing calculator hard case, the interior is made of high quality velvet, the soft inner structure ensures the protection of the ti84 graphing calculator color. The texas instruments ti 84 plus has a hard case with a mesh design on one side to store your ti 84 graphing calculator plus ce accessories and soft storage on the other side for your ti 84 plus calculator. | This texas instruments ti 83 graphing calculator hard shell case is made of high quality EVA material, which is shockproof, dustproof and waterproof, it can protect your ti83 graphing calculator from shocks and splashes when you go out to carry. Put the ti 83 calculator in the box after using the ti 83 graphing calculator at home to prevent the graphic calculators ti 83 plus from accumulating dust | This hard case designed for ti83/84 plus graphing calculator keeps your graphing calculator ti-83/84 safe, convenient and lightweight. The classic zipper design makes it easy to open and close. This graphing calculator hard case can better protect your device. It is very practical and convenient. | This hard case designed for ti 84 plus graphic calculator is very easy to carry and use. Whether you're at work or at home, just unzip the hard case and take out the ti 84 plus texas instrument calculator and you're ready to go anywhere. The long-term protection of the device by the case also greatly extends the life of the graphing calculator (note: only the case is sold, ti 83/84 graphing calculator and accessories are not included)

【5GHz & 2.4GHz Dual Band WiFi】 Our light bulb security camera supports 5GHz and 2.4GHz dual band Wi-Fi connection. The 5GHz band has higher transmission rates and less interference than the 2.4GHz band, while the 2.4GHz band has wider coverage and better penetration. This not only provides a more stable and faster network connection but also increases coverage and signal strength to ensure stable and efficient video surveillance services. | 【“Special” Patrol Mode & Auto Detail Zoom】 The cameras for home security offers two patrol modes: panoramic and viewpoint. In panoramic mode, the camera will cycle scan all surveillance angles; in viewpoint mode, it will cycle through all set surveillance points (up to 6 points), staying at each position for 10s. And the patrol mode supports 24/7 or customized time recording. Besides, the pet camera has an auto detail zoom function, which can auto-magnify the details of items in the image. | 【So Easy to Connect and Install】 Rocktone security cameras wireless can be used quickly in under a minute. You only need to turn on the Bluetooth of your phone, then open the 'TinoSec' app, click to add a device, and a new lightbulb camera will pop up, click to add a device and enter the WiFi password, wait for a moment and the connection will be successful. Then you just plug it into a standard E26/E27 light socket (110V~240V) like a light bulb, and you can start using it indoors or outdoors. | 【Human Detection and Motion Tracking】 The wireless security camera outdoor indoor uses AI algorithm recognition to accurately detect human bodies and send out alarm information in real time to the mobile app. In addition, the automatic tracking technology can automatically track and record them within 355° panning and 120° ultra-wide viewing angle within 30 feet. | 【24/7 Recording and Optional Storage】 The IP66 waterproof light socket security camera supports 24/7 continuous recording, it monitors the surrounding environment day and night, capturing every moment, giving you peace of mind. For first-time users, you can enjoy a 7-day free cloud storage trial and it supports SD cards (up to 128GB, not included). The server is located in the United States, ensuring that recorded videos stored in an encrypted cloud server are safe and protected.

Designed ONLY to be compatible with MacBook Air 13 inch case M1 with Retina Display and Touch ID 2022 2021 2020 2019 2018 Release (Models: A2337 M1 A2179, A1932 - MGN63LL/A, MGND3LL/A, MGN93LL/A, MGN73LL/A, MGNE3LL/A, MGNA3LL/A, MWTJ2LL/A, MVH22LL/A, MWTL2LL/A, MWTK2LL/A, MVH52LL/A, MVH42LL/A, MVFH2LL/A, MVFM2LL/A, MVFK2LL/A, MVFJ2LL/A, MVFN2LL/A, MVFL2LL/A, MRE82LL/A, MREE2LL/A, MREA2LL/A, MRE92LL/A, MREF2LL/A, MREC2LL/A). WARNING: This case is NOT compatible with other model laptops. | Please kindly check the model number "Axxxx" on the back of the laptop before your purchase, make sure you choose the exact same model number as the listing title stated "A2337" or "A2179" or "A1932" that compatible with MacBook Air 13 case M1. | NO Cut Out design, transparency is different from color to color. Fully vented for safe heat disbursement, fully access to all buttons and features. Totally removable, easy to put on and take off that can protect your laptop from scrapes and scratches. | Case dimension: 12 x 8.5 x 0.62 inch, compatible with MacBook Air 2018 case, compatible with MacBook Air 2019 case, compatible with MacBook Air 2020 13 inch case, compatible with MacBook Air M1 2021 case and compatible with MacBook Air M1 2022 case with Retina Display & Touch ID with dimension: 11.97 x 8.36 x 0.61 inch (2022 2021 2020 2019 2018 Released). | Including 2 matching color keyboard covers (compatible with MacBook Air 13 inch 2020 2021 2022 release model A2337 M1 A2179 and compatible with MacBook Air 13 inch 2018 2019 release model A1932) & 1 screen protector to protect your keyboard & screen against spills. The small storage bag keeps mouse and earphone well-organized.

【Special Diffusion】The black diffusion filter can reduce highlight glare and lower contrast. It will create a soft glow in bright lighting, and will diffuse the colours and smooth the contrast in neutral lighting.That will make the picture or video more integrated and natural. | 【Dreamy & Cinematic Effect】The black mist filter helps to make the skin or pores more delicate and smooth; it effectively adds a softer glow，creating a delicate and hazy cinematic effect. Perfect for portrait photography, video recording and vlog videos. | 【Quality Made & Easy Installation】Ultra-slim frame made of high-quality aviation aluminium keeps the filter lightweight and tough. Only 3.2mm avoids vignetting and dark corners. The CNC screw-in design is easy to install and remove. | 【Mlti-coating AGC HD Glass】Made of AGC HD optical glass with 88% light transmission. Double-sided multi-layer nano coating effectively reduce the reflection, while making it waterproof, scratch resistant, and oil-proof, easy for cleaning and carrying. | 【Compatible & Comprehensive】The 1/2 black diffusion filter is compatible with all 46mm lenses,please verify your camera's lens thread size before ordering. Here are 3 filter strengths available from weakest to strongest: 1/8, 1/4 and 1/2, please choose the right one you want.

【6x sparkling effect】Cross Screens can shape the light captured into 6X flare twinkling stars giving a soft-focus effect. This type of star filter with a more unique cross effect. In contrast to conventional star filters, the 6X SPARKLE filters create only moderately sized beams, preventing that the star effect totally takes over the image. | 【Rotatable front frame】This filter comes in a rotating mount for placement of the star effect. The orientation of stars do affect the composition of your image. By turning the front frame, you can change the angle of the cross pattern. All our filters are double-threaded for stacking filters or using screw-in lens caps. | 【Creative applications】Smaller, pointed light sources will create more of a star-like effect while larger dimmer light sources will bloom or halate. In the absence of strong light sources in the composition, the star flare filter produces a soft effect in your image, creating a dreamy atmosphere. | 【Professional manufacturing】The twinkle effect is created by a series of closely-spaced, thin lines etched into the flat surface of an otherwise piece of clear optical glass. Our consciously designed ultra-slim aluminum alloy rim (4mm excluding thread) avoids vignetting. | 【Warm tips & warranty service】This filter can be attached to any 82mm lens. Please verify your lens thread size on your camera indicated by the symbol "Ф" (diameter) before ordering. We believe in delivering excellent customer service and do everything possible to satisfy our customers. If you have any questions, please feel free to contact us.

✔️【2024 Upgrade Stable Tablet Stand】 Made of Heavy duty aluminum-magnesium alloy solid cord , stiffened material, very sturdy and flexible. 30 inches (76 CM) Overall Length from bottom to top. Moreover, compared to most of the tablet stands on the market, our tablet holder is upgraded, the bottom is additionally reinforced to ensure its maximum stability. Make it strong and sturdy to protect your cellphone and tablet. | ✔️【Universal Compatibility】 VIVI MAO tablet holder has a wide range of compatibility, suitable for almost all 4.7-12.9 inch devices on the market, such as iPad mini 2 3 4 5,iPad Pro 9.7 10.5 11 12.9, iPad Air 2 3 4, Galaxy tabs, Switch, Fire HD tab , iPhone 13 /pro Max /Pro/X/11 10 8 7 6 , Samsung Galaxy Tab 10.1" 10.5" 9.7" 9.6" 8", Kindle Fire HD 7 8 10 , ect. In addition, the tablet phone is equipped with silicone pads, which will protect your device from scratch and damage. | ✔️【Additional Reinforced Upgrade Base】Reinforced and thickened base, not easy to break. Non-slip silicone pads are added to the base clip to avoid damage to your furniture. The base has a maximum clamp size of 3.7 inches, maximizing usability. Whether you're laying in bed watching movie, viewing recipes in the kitchen,exercising in the gym, or using your devices anywhere, you don't have to worry about falling and breaking it. | ✔️【360 Degree Free Rotation】 This gooseneck clamp can be mount to many places like bed headboard, desk or table next to your favorite chair. With 360 degree rotate clip and flexble arm, It can be adjusted to your eye level or any other height you want. Free your hands when watching movies, playing games, reading, viewing recipes, recording videos, etc. | ✔️【Using Tips】1. Please loop the long arm into “S or Z "shape or circle shape helps maintain more stability . 2. The material of the holder is stronger for the heavy tablet, it will be a litte hard to bend, so please use your both hands to bend the holder when you start to use it. 3. This type of gooseneck tablet holder is perfect for reading,viewing,or recording. But when you tap on your tablet frequently , it unavoidably bounces and wobbles due to some law of physics.

The Thumbs Up Grip attaches to your Fujifilm XT5 camera via the hot shoe to dampen vibrations and provide stable, protected contact with the camera. | This grip provides a more ergonomic structure to the camera, allowing for greater one-handed operation as well as more balance and less grip pressure required when shooting. | You can securely grip the camera and hold it in any position with the thumb up. | Provides a better balance and grip for the camera. | Aerospace aluminum, CNC precision machining, Surface anodizing.

【Widely compatible】-Applicable to Android/IOS/Window 10/7/XP system. Compatibility with PS4/PC/MAC and almost of all 3.5mm headphones. Suitable for TRS, TRRS microphones. | 【Virtual 7.1 Surround Sound】-External sound card with 7.1 virtual surround sound. Bring you a immersive listening experience. You can quickly perceive footsteps and other environmental sounds in the game to quickly make judgments.You can also enjoy the visual banquet brought to you by music. | 【Multi-Function Controller】-You can freely adjust the volume of the microphone and earphones to adapt to different scenarios. You also can quickly mute the mic with the microphone mute button. Unique LED indicator design makes it easier for you to identify the on and off of 7.1 virtual surround sound and microphone mute function. | 【Audio Upgrade&Plug and Play】-USB to 3.5mm jack audio adapter with durable ABS material braided cord has a longer service life. Lightweight and easy to carry. Easy to use, plug and play no drivers needed. | 【Buy with Confidence】-1Mii has been committed to audio design for many years. Every audio product launched will pass repeated regulation test, striving to achieve the best products and services.If you encounter any problems during use, please contact us in time and we will provide you with a satisfactory solution in time.

Designed ONLY to be compatible with MacBook Air 13 inch case M3 M2 2024 2023 2022 Release with Liquid Retina Display & Touch ID (models: A3113 & A2681 - MRXV3LL/A, MRXQ3LL/A, MRXN3LL/A, MRXT3LL/A, MXCV3LL/A, MXCT3LL/A, MXCR3LL/A, MXCU3LL/A, MLXW3LL/A, MLXX3LL/A, MLXY3LL/A, MLY03LL/A, MLY13LL/A, MLY23LL/A, MLY33LL/A, MLY43LL/A). WARNING: This case is NOT compatible with other model laptops. | Please kindly check the model number "Axxxx" on the back of the laptop before purchase, make sure you choose the exact same model number as the listing title stated "A3113" or "A2681" that be compatible with MacBook Air 13 inch case M2 & compatible with MacBook Air 13 inch case M3. Case dimension: 12 x 8.5 x 0.46 inch, compatible with MacBook Air M2 case, compatible with MacBook Air M3 case with liquid retina display & Touch ID with dimension: 11.97 x 8.46 x 0.44 inch (2022 2023 2024 Released). | NO Cut Out design, transparency is different from color to color. Fully vented for safe heat disbursement, fully access to all buttons and features. Totally removable, easy to put on and take off that can protect your laptop from scrapes and scratches. | 2 pack USB C to USB adapter plug the adapter USB Type-C end into laptop USB-C port, then connect another female USB 3.0 port to standard USB-A device, such as, mouse, keyboard, SSD and flash. Support OTG function to load USB flash disk directly. This USB Type-C to USB connector also support synchronous charging to your phone and tablet with data transfer speed up to 5.0Gbps. This USB-C to USB 3.0 converter is made of Zinc alloy with baking finished surface. | Including matching color keyboard cover & screen protector to protect your keyboard & screen against spills. This type C adapter will not affect Wifi signal or cause heat issue.

FOR LATEST MACBOOK AIR 13.6 INCH 2022 2023 2024 TOUCH ID CASE -- Only compatible with MacBook Air 13.6" 2022 2023 2024 Release (Model A2681 with M2 Chip or A3113 with M3 Chip). | ATTENTION -- Please kindly check the model number "Axxxx" on the back of the laptop before your purchase, make sure you choose the exact same model number as the listing title stated "A2681 or A3113". The case is not compatible with 2021-2018 MacBook Air 13 inch (Model: A2337 M1 / A2179 / A1932) & 2017-2012 Older MacBook Air 13 inch (Model: A1466 A1369) & 2024 2023 Newest MacBook Air 15.3 inch (Model: A2941 M2 / A3114 M3). | CASE DIMENSIONS & WEIGHT -- The case included top part and bottom part. Top part is 13.38 x 8.85 x 0.3 inch. Bottom part is 13.38 x 8.85 x 0.48 inch. The whole case only weights 9.87 OZ. You'll feel your laptop more natural in hand. | FULLY VENTED & DESIGN -- No cut out design and logo see through the case. Full vented for safe and heat disbursement. Easy access to all ports and features, you can plug your charger, cable, or headset without removing the case. | WARRANTY -- TWOLSKOO offers ONE year warranty on the case for MacBook Air 13.6 Inch and keyboard cover.

Personalize your Pix-Star frame with the crocodile textured skin in pink, white, or blue | The perfect accessory for your frame | Simply peel and stick, the adhesive is strong and reusable | Add a pop of color and blend with your décor | Choose your favorite or grab all three

External Mini SAS 26pin SFF-8088 to Mini SAS 26pin SFF-8088 Cable Assembly, 2-Meter(6.6ft), 30AWG. | Twinaxial 8-pair high-bandwidth, support transmission rates Up to 6Gbps per channel, Impedance = 100 Ohms, low-skew. | Solid connection and Excellent EMI performance. Easy to install, PLUG AND PALY, Hot pluggable. | Compliant with 3Gb/s SAS and 6Gb/s SAS protocols. | Wide Applications: External cabling solution for Mini-SAS devices. Widely used in DATA Center, Servers, External Storage Systems, SAS, DAS, Switches.

[Unique Design] - Designed for iPad air 11-inch M2 2024 / iPad Air 10.9 5th Generation 2022 (model number: A2589 A2591 A2588) / iPad Air 4th Generation 2020 (A2316 A2324 A2325 A2072). . Please Note: It doesn't fit for any other tablet models. | [Durable Material] - Made of High Quality TPU Material, slim and lightweight design with excellent craftsmanship and feel. Prevents the tablet from scratching and bumping | [Built-in Pencil Holder and Side Charging] - Compatible with the Apple Pencil(2nd Gen) magnetic attachment and wireless charging on the side (Apple Pencil is 𝐍𝐎𝐓 included) | [Support Touch ID Function and Auto Wake/Sleep] Completely support newest touch ID key function to wake your iPad at any times. | [100% Fit] - Precise cutout and design allow easy access to all ports, sensors, speakers, cameras.

Compatibility: Only design for 2021 2020 2019 2018 MacBook Air 13 inch with Retina Display and Touch ID (Models M1 A2337, A2179, A1932 - MGND3LL/A, MGN93LL/A, MGN73LL/A, MGNE3LL/A, MGNA3LL/A, MWTJ2LL/A, MVH22LL/A, MWTL2LL/A, MWTK2LL/A, MVH52LL/A, MVH42LL/A, MVFH2LL/A, MVFM2LL/A, MVFK2LL/A, MVFJ2LL/A, MVFN2LL/A, MVFL2LL/A, MREE2LL/A, MREC2LL/A, MRE82LL/A, MREA2LL/A, MREF2LL/A, MRE92LL/A). Check your device model before purchasing. | Durable Material: Hard plastic covers provide full protection against scrapes and scratches on both top and bottom. Case dimensions: 12 x 8.5 x 0.62 inches, weight: 0.61 lb. | Easy Installation: Micro clips ensure secure attachment and easy removal. | Ventilation and Accessibility: Fully vented for heat dissipation. Allows full access to all ports and Touch ID. | Complete Package: Includes a protective case, two keyboard covers, dust plugs, and a screen protector.