This cable is designed for connecting timecode generator to Cameras and Audio Mixers, Transmit time code information between them. | It is Bi-directional timecode signal cable, Suitable for the following machines: Zaxcom and more timecode generators (with 3.5mm jack), C300 MK2 / C500, Sy F55/ PDW 700 / EX3 / PMW 200, Photograph Camera, Zoom F4 F8 and more. | Plug A: Right Angle 3.5mm TRS Jack Connector; Plug B: Right angle BNC Connector. | Cable Length: 31.5inches/80cm (We can customize with other length, please contact us if you need). | Each cable we produce has been rigorously tested and is compatible with machines from a variety of major brand suppliers,We are committed to all the products are qualified and high-quality.

Mini SAS SFF-8088 to SFF-8087 Cable, 30AWG, 0.5 meter. | It is specifically designed to connect an SAS controller with an SFF-8088 port to an internal RAID card with an SFF-8087 port. | SAS2.0 refers to the SAS interface version 2.0, which supports data transfer rates up to 6 Gbps per lane. SAS cables can carry signals over multiple lanes, so the effective bandwidth can be higher. | Support SAS or SATA Storage Systems and Drive Bays. | This cable is designed for high-speed data transfer in professional settings where reliability and performance are critical. If you need such a cable for your setup, ensure that your devices support the SAS2.0 protocol and have the appropriate connectors.

New design with vertical 90 degree connector,suitable for vertical installation | High Quality Solder Points and Gold plated Contacts for the Best Conductivity and Long Use | Extremely High speed cable allow PCI express video card in any direction on suitable position, Don't fold the cable, which would cause poor connection and unstable signal transfer | This Extreme PCIE cable does the job without sacrifice the performance and runs steadily for more than a couple of weeks.It completely solves the heat and performance problem we had | High Graphics Card Performance:high-frequency and low-resistance PCB design to reduce interference,ensuring maximum performance Strengthen Connecting Protection:Strengthen protection avoid signal loss and enhance the durability when connecting to the motherboard and when the riser cable is folded or twisted in order to maximize the internal space and optimize

【Ultra-Dark ND Lens Filter】Capture stunning images with unparalleled clarity and natural color, with our exclusive ND1000000 Filter. | 【20 Stops Light Reduction】This ND1000000 lens filter provides 20 stops light reduction, blocks extreme amounts of light. It delivering crisp, sharp, and vivid images without overexposure or color cast. | 【Premium Material 】This ND lens filter made by imported AGC optical glass, 0.2% reflectivity; Aviation aluminum alloy frame, super slim and lightweight, avoiding vignetting on the wide-angle lens. Extra tough frame ensuring durability and jamming prevention. | 【28 Multi-Layer Coatings】Multi-Layer coated process suppresses ghosting, flare, and reflections, and increases light transmission; effectively reducing the light reflection of the surface, and improving image quality. | 【Compatible Note】The 58mm fixed nd filter ONLY be used on 58mm lens, please verify your lens size before ordering, this number is always preceded by a "ø" (diameter) symbol.

【Square ND Camera Lens Filter】Designed to be mounted on a matte box to fit camera lens, compatible with Tilta SmallRig Matte Box, Mini Matte Box, Filter Frame. The NEEWER square ND0.6 (2 stops) 4" x 5.65" / 10.16 x 14.35cm filter enables more control over shutter speed and aperture, avoiding overexposure and helping to balance image exposure, perfect for shooting in bright sunlight, creating motion blur. Ideal for professional photography and videography | 【Professional Build with HD Optical Glass】Made of HD optical glass, this CNC machined and polished filter delivers high clarity pictures without compromising image quality or adding color cast. Not being directly screwed onto lens, the square ND filter can be used for lenses of various focal lengths when mounted on a matte box | 【ND0.6 Filter with 25% light transmittance】The ND0.6 neutral density filter blocks 2 stops of light from entering into camera lens and features 25% light transmittance. The number 0.6 stands for the filter’s optical density. Optical density grows and light transmittance lowers as the number goes up. | 【Double Sided Multi Layers of Nano Coatings】 The multiple layers of Nano coatings on both sides make the filter scratch resistant, water repellent, oil proof and fingerprint resistant. Use the included cleaning wipes to clean the filter with ease | 【Super Slim & Lightweight】 0.16"/4mm thick and weighs only 5.12 oz/147g. This ultra slim and lightweight filter adds barely noticeable weight to your filming setup when mounted on. Store it in the carrying case for safekeeping and easy carrying

Filter Size - Width: 15.1" (383mm), Height: 8.5" (215mm), Diagonal: 17.3" (439.42mm) - Blackout Privacy Filter is designed to be compatible with Lenovo, HP, Dell, Acer, Asus, Samsung and other laptop brands. Please verify screen width and height measurements before ordering. It is not recommended to choose based only on the diagonal size of the screen. | Superior Privacy and Anti Glare - privacy screen laptop 17.3 inch, Our advanced multi-layered film filter blacks out your screen when viewing from the side, while maintaining a crystal clear screen straight-on. computer screen privacy Shield also protects your eyes from harmful glare, UV, and blue light, effectively protect your eyes from eye damage, visual fatigue, eye pain and headaches. | Perfect for Travel and Open Workspaces - 17.3 inch laptop screen protector is the ideal solution for healthcare providers, mobile workers, commuters, students, and business travelers. Now you can stay compliant and safeguard sensitive corporate information while working in airplanes, subways, airports, and public areas. | Install Options- There are two methods of installation for your laptop Privacy Screen filter. Option 1 includes high-quality adhesive strips that can be placed on the outer edges of your Privacy filter, and simply attach to your laptop; Option 2 includes slide mount tabs, that attach your bezel on your laptop, allowing you to easily remove your Laptop Privacy Screen filter from your laptop screen when needed. All Privacy accessories and installation instructions are included. | Packaging Accessories- Laptop Screen Privacy Shield Package Accessories Contents：17.3 Inch Laptop Privacy Screen, Cleaning Cloth, Double-Sided Tape, Slide Mount Tabs, Instruction Manual. specializes in providing best-in-class privacy solutions to individuals, small businesses, corporations, government and educational institutions.

Fit: Perfect cutout and shape, specially designed for all-new Kindle Scribe 10.2" 2022 Released | AUTO WAKE/SLEEP: With the built-in smart cover,your Kindle e-reader will be woke up or put to sleep seamlessly. All you need to do is to enjoy reading.Magnetic Closure: The magnetic design helps the kindle paperwhite cover close securely, providing a 360 degree protection for your device | MATERIAL: Features the premium waterproof PU leather exterior, anti-scratch microfiber interior and 100% Polycarbonate case. This will definitely be a perfect choice of kindle case for you | Lightweight and Travel-friendly：Lightweight case gives your device maximum protection without adding extra bulk.Put it in your bag and you can enjoy reading anytime and anywhere | Reliable and Durable: Meticulously constructed with top-tier quality materials, our product exudes reliability and durability, ensuring your purchase is a confident choice

The 2-in-1 flash drive with a reversible USB Type-C and a traditional Type-A connector. | Seamlessly move content between your USB Type-C smartphone, tablets and Macs and USB Type-A computers(2) | (2) Mobile device requires USB Type-C port and On-The-Go (OTG) support. See the official SanDisk website for a list of compatible devices. | Free up space on your USB Type-C smartphone(2) | Automatically back up photos with SanDisk Memory Zone app(3) | (3) Download and installation of SanDisk Memory Zone app required. | High-performance USB 3.1 Gen 1 drive with 150MB/s read speeds(1) | (1) Read speeds up to 150MB/s. Write speed lower and vary by capacity. USB Type-C port with USB 3.1 Gen 1/ USB 3.0 support required. Based on internal testing; performance may be lower depending upon host device, interface, usage conditions and other factors. 1MB = 1,000,000 bytes. | Compatible Devices: Tablet Mobile

【Package includes】: 6-Pack Replacement for Brother P Touch Label Maker Tape 12mm 0.47, TZe-B31 TZe-335 TZe-431 TZe-531 TZe-631 TZe-731 Color: Black on Orange/Red/Blue/Yellow/Green and White on Black. Width: 1/2" (12mm). Length: 26.2' (8m) | 【TZ Tape 12mm 0.47 Laminated Colored】:Split backing for easy peeling. No sticky residue remains when the labels are removed. | 【P Touch Label Maker Tape 12mm 】: Indoor or outdoor labels,These Laminated label tapes are Water Resistant, Grime Resistant, Grease Resistant, Temperature Resistant, Abrasion Resistant, Chemical Resistant as well as Fading Resistant. | 【PTouch Label Tape Wide Applications】-Use ▶ Item Differentiation, Date Labeling, Operation Tips, Price Labeling, Personal Items Labeling, DIY Blessing Language and more.-Scene ▶ Home, Office, School, Hospital, Government, Hotel, Restaurant, Factory, Bank, Laboratory, Warehouse, Farm, Repair Shop，Stores, Supermarkets and more. | 【Compatible Brother P touch Label Maker】: PT-H100 PT-H103w PT-H110 PT-H111 PT-D200 PT-D200g PT-D202 PT-D210 PT-D220 PT-P300BT PT-D400 PT-D400ad PT-D410 PT-D460bt PT-D600 PT-D610bt PT-P700 PT-P710BT PT-P750W PT-1000 PT-1010 PT-1090 PT-1100ql PT-1170 PT-1180 PT-1280 PT-1290 PT-1700 PT-1750 PT-1800/1810 PT-1830 PT-1880 PT-1890 PT-1900/1910 PT-1950/1960 PT-2030 PT-2040/c/sc PT-2100 PT-2700 PT-2730 PT-6100 | PT-E500,PT-P700, PT-P750W, PT-1230PC,PT-2110,GL-100,PT-1000BM,PT-1010B, PT-1010NB, PT-1010R, PT-1010S,PT-1090BK,PT1100SB, PT-1100SBVP, PT-1100ST, PT-1120, PT-1130, PT-1160,PT-11Q, PT-1200,PT-128AF,PT-1300,PT-1400, PT-1500, PT-1600,PT-18R, PT-18RKT PT-2100, PT-2200, PT-2210, PT-2300, PT-2310, PT-2400, PT-2410, PT-2430PC, PT-2500PC, PT-2600, PT-2610, PT-2710, PT-2730, PT-2730VP, PT-300, PT-300B, PT-310, PT-310B, PT-320, PT-330, PT-340, PT-350, PT-3600, PT-4000, PT-520, PT-530, PT-540 and more, Please See the Description Below

Compatibility: only for iPad Air 13ʺ (2024); models: A2898, A2899, not compatible with any other iPad models | Ultimate Protection: 110-lb force-resistant tough glass, tempered to the highest hardness rating, ensures your screen stays protected against scratches and cracks from drops, bumps, keys, or cables | Quick and Easy Application: included application tray takes the guesswork out of installation to ensure quick and easy bubble-free application every time | Clear and Responsive: ultra-thin, ultra-transparent 0.33-mm glass ensures a flawless display and responsive touchscreen with a cutout for the camera that guarantees pixel-perfect FaceTime; full Pencil support | What’s Included: 2 Armorite tempered-glass screen protectors, 2 cleaning kits, application tray, and manual | Complete Customer Support: detailed setup videos and FAQs, comprehensive 12-month protection plan, lifetime support, and personalized help.

Tempered glass durability rated at 9H hardness | An innovative, auto-alignment tool for effortless installation | Oleophobic coating for daily fingerprint resistance | Touch-responsiveness guarantee hassle-free access and no delay | Case Compatible with Spigen iPad Pro 11 inch case | iPad Pro 11 Screen Protector, Designed for iPad Pro 11 inch M4 (2024)

Designed ONLY to be compatible with MacBook Air 13 inch case M3 M2 2024 2023 2022 Release with Liquid Retina Display & Touch ID (models: A3113 & A2681 - MRXV3LL/A, MRXQ3LL/A, MRXN3LL/A, MRXT3LL/A, MXCV3LL/A, MXCT3LL/A, MXCR3LL/A, MXCU3LL/A, MLXW3LL/A, MLXX3LL/A, MLXY3LL/A, MLY03LL/A, MLY13LL/A, MLY23LL/A, MLY33LL/A, MLY43LL/A). WARNING: This case is NOT compatible with other model laptops. | Please kindly check the model number "Axxxx" on the back of the laptop before purchase, make sure you choose the exact same model number as the listing title stated "A3113" or "A2681" that be compatible with MacBook Air 13 inch case M2 & compatible with MacBook Air 13 inch case M3. Case dimension: 12 x 8.5 x 0.46 inch, compatible with MacBook Air M2 case, compatible with MacBook Air M3 case with liquid retina display & Touch ID with dimension: 11.97 x 8.46 x 0.44 inch (2022 2023 2024 Released). | NO Cut Out design, transparency is different from color to color. Fully vented for safe heat disbursement, fully access to all buttons and features. Totally removable, easy to put on and take off that can protect your laptop from scrapes and scratches. | 2 pack USB C to USB adapter plug the adapter USB Type-C end into laptop USB-C port, then connect another female USB 3.0 port to standard USB-A device, such as, mouse, keyboard, SSD and flash. Support OTG function to load USB flash disk directly. This USB Type-C to USB connector also support synchronous charging to your phone and tablet with data transfer speed up to 5.0Gbps. This USB-C to USB 3.0 converter is made of Zinc alloy with baking finished surface. | Including matching color keyboard cover & screen protector to protect your keyboard & screen against spills. This type C adapter will not affect Wifi signal or cause heat issue.

😎 Lead the Style Movement: Exhibit your distinctive style with MightySkins for Echo Show 8. Choose from an extensive selection of designs to impart unparalleled individuality to your device. | 🌟 Glossy Glitter Glamour: Immerse yourself in the refined sparkle of glossy glitter, providing vivid hues and lasting resilience. Elevate your gear to a uniquely distinguished level. | 💣 Robust Device Defense: Engineered with ultra-thin, ultra-durable, stain-resistant laminate vinyl, MightySkins provides unparalleled protection against dings, scrapes, dust, and daily wear. It is a 3M vinyl decal skin, and is explicitly not a hard case. | 🔥 Effortless Application and Removal: Facilitate the application and removal of your MightySkins vinyl decal with precision on your Echo Show 8 using our patented low grip air release adhesive. Designed for longevity, it seamlessly detaches without leaving residual adhesion, offering ease when transitioning between designs. | 🗽Craftsmanship in the USA: Purchase with assurance from an American-owned and operated enterprise. MightySkins are meticulously manufactured in our state-of-the-art facility located in West Palm Beach, Florida - a testament to our commitment to quality and the U.S.A. heritage.

❤COMPATIBILITY:The case was ONLY designed for MacBook Pro 13 inch Case M2 2023,2022,2021-2016 A2338 M1 A2251 A2289 A2159 A1989 A1708 A1706 Release with Retina Display & Touch ID.Please check the model number (AXXXX) at the bottom of your to determine the compatibility and refer to the attached picture to see if the model number is compatible with your Macbook.The Case is not compatible with MacBook Air 2010-2017 version. | ❤STYLISH DESIGNS:Adopt unique process technology.Elegant and simple woven fabric and tartan PVC leather design.You can choose from various fashionable colors for your laptop.The surface is smooth and soft.Multi colors like beige,pink,green,brown,grey,black are available. | ❤FUNCTION:Thin and light design ensures your Macbook stays light so it is more portable.360° Protection. Protects your Macbook against scratches and scuffs.Prevent dust in the keyboard.Four rubberized feet keep your notebook stable and secure.The bottom of the shell is mesh hollow specially designed for heat treatment to achieve better ventilation and heat dissipation.Strong anti fingerprint.This case gave you those options to protect your device. | ❤FULLY ACCESS & CONVENIENT INSTALL:This case design with precision cutting that you can easy to use all ports, lights, and buttons. Plug your charger, cable, or headset without removing the case.Two pieces design,easy to clip on and take off,let you open/close your freely all the time.Clamps all around the body of the computer and provides you with great all round protection. | ❤OPTIMIZED FOR PROTECTION:Understanding the importance of safeguarding your Mac.Our has been committed to professional ultra-thin protections.Protective case adopts high-precision surface treatment to perfectly match your MacBook.It retain the original slim design of your computer.

【Unrivaled Stability for Bird Watching】 Exclusively designed for avid bird watchers, this monopod gimbal head provides unparalleled stability when mounted on a monopod. No more worries about shaky footage! It ensures optimal balance, allowing you to track birds or capture dynamic moments with telephoto lenses effortlessly. From horizontal to vertical orientations, the low profile ball head always keeps your footage steady and shake free | 【360° Pan & 90° Tilt Shooting Flexibility】 With a low profile ball head and 360° pan base, this monopod head has a single U notch for smooth and effortless vertical and horizontal transitions, along with the ability to rotate a full 360° for stunning panoramic views. The enlarged knurled knob improves control and ease of use | 【Quick Release Arca Type QR Clamp】 Say goodbye to cumbersome device switching. The monopod tripod mount features a top Arca Type quick release clamp, allowing quick and hassle free device switching via the Arca type QR plates (plates not included). The side knob ensures a secure and tight lock, providing you with peace of mind during your photography sessions | 【Diverse Mounting Options】 Integrated with an Arca type base, this gimbal head for tripod can effortlessly slide into the Arca type quick release clamp base of a tripod, stabilizer, slider, handgrip, or other support systems. The bottom 3/8" threaded hole can also be attached to a tripod, monopod, slider, etc. | 【Robust & Portable】 Crafted from black anodized aluminum alloy, this monopod head guarantees durability and high performance. Measuring just 3.7"x3.3"x2.8"/93x83x71mm and weighing 9.3oz/265g, it is compact and lightweight, making it perfect for outdoor adventures and on the go filming

Tempered glass durability rated at 9H hardness | An innovative, auto-alignment tool for effortless installation | Oleophobic coating for daily fingerprint resistance | Touch-responsiveness guarantee hassle-free access and no delay | Case Compatible with Spigen iPad Air 11inch case | iPad Air 11 Screen Protector, Designed for iPad Air 11 inch M2 (2024)

This CPL is applicable to the front camera of F7N series | IMPRCVED IMAGING QUALITY-Circular polarizer reduces light spots on bright surfaces and improves image quality by eliminating reflections from glass and water | PROTECT THE LENS-Avoid wear and tear of the lens and prolong the life of the lens. Insulate from fingerprints and dust, just clean the CPL | SUPER AFTERSALES-Our greatest pursuit is to satisfy the needs of consumers. Email our customer service and we will answer any of your questions/concerns. We offer 7*24 hours technical support

【Ultra-Dark ND Lens Filter】Capture stunning images with unparalleled clarity and natural color, with our exclusive ND1000000 Filter. | 【20 Stops Light Reduction】This ND1000000 lens filter provides 20 stops light reduction, blocks extreme amounts of light. It delivering crisp, sharp, and vivid images without overexposure or color cast. | 【Premium Material 】This ND lens filter made by imported AGC optical glass, 0.2% reflectivity; Aviation aluminum alloy frame, super slim and lightweight, avoiding vignetting on the wide-angle lens. Extra tough frame ensuring durability and jamming prevention. | 【28 Multi-Layer Coatings】Multi-Layer coated process suppresses ghosting, flare, and reflections, and increases light transmission; effectively reducing the light reflection of the surface, and improving image quality. | 【Compatible Note】The 62mm fixed nd filter ONLY be used on 62mm lens, please verify your lens size before ordering, this number is always preceded by a "ø" (diameter) symbol.

【Comfort Performance】Upgraded chesty has a padded construction design that is more stable and comfortable on your chest. It's made with breathable lightweight materials that further add to the comfort aspect. | 【Flexible Strap】Fully adjustable to comfortably fit a wide range of body types as well as over heavy winter coats. Specially designed quick-release buckle lets you get in and out easily even with gloves on. | 【Stabilization Structure】Stable platform for capturing incredibly immersive hands-free POV footage with GoPro from your chest. Delivers an ultra engaging perspective, lower-than-the-helmet view of the action. | 【Wide Application】Great for getting awesome videos and photos while biking, hiking, skiing, mountain biking, cycling, motocross, snowboarding, fishing, kayaking, rafting, surfing, climbing, soccer, sightseeing, football and family trips. | 【Extensive Match】Compatible with all Go Pro Hero12, Hero11, Hero10, Max, Hero9, Hero8, Hero7, Hero6, Hero5, Session, Hero4, Hero3+, Hero3, Hero2, Hero1, Hero (2018), Fusion and DJI Osmo, AKASO, SJCAM, APEMAN, Campark, Insta 360 action cameras.

This OCuLink cable can be used to connect internal devices, e.g. a backplane with SFF-8611 connector to a controller with OCuLink SFF-8611 connector. | OCuLink SFF-8611 male to SFF-8611 male,Lock to Mating Part: With Active Latch | System requirements:A free OCuLink interface | Data transfer rate up to 64 Gbps,Supports PCI Express 4.0 | CY Cable OcuLink PCIe PCI-Express SFF-8611 4i to OcuLink SFF-8611 SSD Data Active Cable 50cm

USB to SERIAL CABLE: Ideal for IT applications such as server rooms, industrial control/automation, logistics, POS, AV installations, laboratories, etc. Connect legacy DB-9 serial communications devices to modern computer with this USB to RS232 converter. (Length: 1 meter/3.3ft) | 9 LED INDICATORS: Solutions for connecting and troubleshooting RS-232 (DB9) interfaces. With status lights, easy check RS-232 host to device link. | USB RS232 CONVERTER: 921.6 Kbps Baud | 512 byte FIFO | Data bits of 5/6/7/8 and stop bits 1/1.5/2 | Parity Modes of None, XON/XOFF, RTS/CTS, DTR/DSR | Flow Control Options Odd/Even/Mark/Space/None/ | COMPATABILITY: Powered by an Available USB port. Compatible with Windows 11/10/8/7, MacOS Sonoma 14 and Linux.(Note: Does not works with Windows ARM system.) | RELIABLE SUPPORT: Backed by 【DriverGenius】 3-Year Warranty and Free Lifetime Technical Support on this USB Serial Port Adapter .

This compact switcher box allows connection of up to three stereo sources, between two amplifiers，3 in 2 out or 2 in 3 out | The most feature: Design as indepently ground connection. Switching signal source is switching ground connection.(ie., all sources are not common GND.) | Stereo Switch Box with Signal Lossless, Sturdy Aluminum case Strong Anti-Interference, Compact Connector Distributor RCA L/R Stereo Splitter Boxes. | Build in quality aluminum chassis, looks nice and durable | This is a passive non-powered device. Plug and play

Designed exclusively for Amazon 6" Kindle Paperwhite 10th Generation, 2018 Release. (Not Fit 6.8" All-new Kindle Paperwhite 11th Generation, 2021 Release and All Paperwhite Generations Prior to 2018, Kindle or Kindle touch). | Made from durable synthetic leather with soft interior to prevent scratches. | Super slim and ultra lightweight edition. Protect your device without adding unnecessary bulk or weight. | Wake or put your device to sleep by opening or closing the cover. Magnetic clasp ensures cover is securely closed, secures your device without straps covering the front. | Available in a variety of bright and fun colors.

Listen to content from your Bluetooth capable device over your car's stereo system using the Bluetooth adapter.Works with any Apple/Android phone | This Buletooth adapter fits Audi and VW group cars with AMI or MDI port with 2G + AMI MMI.,Concert and Navigation Plug models | Activate the AUX mode in the MMI system and connect your smartphone with this bluetooth adapter, then you can listen music via the car stereo. | For Bluetooth mode,you can only change songs from the smartphone, no control over music from the MMI system.The playlist will not be displayed on the scree

The RFID card reader can't work-alone and it needs to work with Wiegand protocol access controller, such as access control panel, fingerprint device or master controller. | The maximum reading distance is 6cm. | Waterproof, conforms to IP66. | This device uses high performance MCU to ensure stable performance, and low-power circuit makes the service life longer. | Widely used in factories, houses, residential quarters, offices, mechanical and electrical control equipment and so on.

【62mm ND100000 filter】ND100000 is a neutral density filter with an extremely high density rating, designed to significantly reduce the amount of light entering a camera lens. This filter is typically used in scenarios where there is an extremely bright light source, such as photographing the sun or other highly illuminated objects. | 【NO Color Cast】Constructed from a high-quality optical glass, the ND100000 lens effectively weakens the incoming light without altering the color or contrast of the original image, allowing for a true representation of the scene. | 【Well Built】 The ND100000 filter features an aluminum frame, which is both robust and durable,ensures that the filter can withstand the rigors of outdoor photography and the demands of frequent use. | 【Slim Rim Profile】With a height of only 2.9 millimeters. This low-profile design makes it particularly suitable for use with wide-angle and ultra-wide-angle lenses. | 【Easy to Use】62mm nd filter can screw on front of the lens. Any lens with 62mm thread it will work.Please verify your camera's lens thread size.For example: Ø62mm.

iPad Car Holder with Great View: The tablet car holder has two 360° swivel ball joints and a 4 inch long mounting arm. No matter which direction it rotates, you can easily adjust your favorite comfortable angle, and the ipad car mount will not block your sight. | Wide Compatibility: OHLPRO Tablet Car Mount is compatible with 5-13 inch devices (maximum length is 9.2 inches when the holder is open, minimum length is 4.7 inches). For example, iPad Pro 12.9, iPad Pro 11, iPad 10.9/iPad 10th generation, iPad Air 5/4, iPad Pro 10.5/9.7, iPad Mini 6/5, Galaxy Tab S8/S7, Kindle, Fire HD, iPhone 15 Pro Max, 14, 13, and other tablets and smartphones. | Sturdy Tablet Car Holder: The iPad dash mount uses screws to fix on the car or desktop, stronger than air vent mounts, dashboard suction cups, windshield suction cups. A rubber pad is installed inside the tablet holder for car, which can better fix the tablet and effectively prevent the tablet from being scratched. | Tablet Holder for Car Dashboard: Heavy Duty Drill Base - Can be mounted on various cars, walls, desks or other smooth flat surfaces, allowing you to mount your tablet wherever you want. You need to prepare your own punching equipment for the installation of the tablet mount for car. | Reliable after-sales service: OHLPRO iPad holder for car has a warranty of up to two years, so you can place your order with confidence. During this period, no matter the item is damaged for any reason or you have any questions, please feel free to contact us.

Long Arm: VAZESWIN double socket arm with an overall length of 5.9"(150 mm) | Sturdy & Durable: The B size 1" ball long arm is made of solid aircraft-grade aluminum alloy with powder-coated to ensure reliability and strength in the harshest conditions | Wide Application: Compatible with RAM Mount & VAZESWIN all 1"(25.4 mm) ball mounting base components | Universal Compatibility: Compatible with other 1" ball device holders, like phone mounts, action camera holders, navigation mounts, marine electronic mounts and more

Supports USB to 2-ch UART, or USB to 1-ch UART + 1-ch I2C + 1-ch SPI, or USB to 1-ch UART + 1-ch JTAG. Supports 2-ch high-speed UART interfaces, up to 9Mbps baud rate, with CTS and RTS hardware automatic flow control | Supports 1-ch I2C interface, for easy operating EEPROM through the host computer or programming I2C devices such as OLED and sensor. Supports 1-ch SPI interface, with 2x chip select signal pins, capable of controlling 2-ch SPI slave devices at different times | Supports 1-ch JTAG interface, can be used with OpenOCD for debugging and testing (Due to the limited testing of chips and software functions, users need to evaluate and test this function on their own) | Onboard 3.3V and 5V level conversion circuit for switching the operating level of the communication interface, better compatibility. Onboard resettable fuse and ESD protection circuit, provides over-current/over-voltage proof, safe and stable communication | Aluminium alloy case with oxidation dull-polish surface, CNC process opening, solid and durable, well-crafted. High-quality USB-B and DC connectors, smooth plug & pull, durable and reliable, with anti-reverse protection

【Color & Contrast Enhancement】CPL filter can remove the non-metallic surface reflection, such as glass, and water, enhancing the color and contrast especially used in white cloud and blue sky photography. | 【Imported AGC Optical Glass】Each filter made by imported AGC optical glass, with no effect on the image quality, ensures the restoration of the image's actual color. | 【28 Multi-Layer Coatings】Multi-coated filter utmost reduce the glaring and flares, waterproof, scratch-resistant, dustproof, and oil-proof, protecting your mini 4 pro lens from all-rounds. | 【Gimbal Safe】Extra tough lightweight aviation aluminum alloy frame ensuring great durability, and stable use for a long time flight, will not affect the gimbal calibration and balance of the Mini 4 Pro drone. | 【Package Including】1x Mini 4 Pro CPL filter comes with a robust filter case.

Package Includes: 6-pack compatible with brother TZe-131 clear label maker tape, 1/2 Inch x 26.2 ft ( 12mm x 8m), TZe-131 black on clear tape. | Easy to Peel :JOJOME 131 label tape is compatible with P Touch TZe 131 1/2 inch (0.47 "). Our label tape is made of high-quality materials and high-quality adhesives, and the label is not easy to shift. | High Compatibility: Compatible with Brother TZe ptouch Label Makers: PT-D200, PT-D201, PT-D202, PT-D210, PT-E100, PT-E105, PT-E110, PT-E300, PT-H100, PT-H103W, PT-H105, PT-P300BT, PT-P700, PT-P710BT, PT-P715eBT, PT-300, PT-300B, PT-310, PT-310B, PT-320, PT-330, PT-340, PT-350, PT-380, PT-1000, PT-1000BM,PT-1010, PT-1010B, PT-1010NB, PT-1010 as well others | Fade Resistant and Dirt-proof: The Brother P touch TZe 131 labels are designed to withstand harsh outdoor conditions. Their durable construction allows them to be used in tough environments, including microwaves, dishwashers, and refrigerators, without fading or getting dirty. | Wide Application: This replacement tape is compatible with label printers and can be used to apply labels in kitchens, shelves, and supply cabinets. Its versatility makes it suitable for various labeling needs.

6 screw holes, 4-screw-locking design makes the cross bar more flexible for adjustment | Tips: Pointed & Flat tips,Jaw opening: 10mm-100mm | Application: opening the grip ring of any optical lens, such as telescope camera lens.Fits some two lens graphics cameras | Made of stainless steel, durable and smooth | Weight: Approx. 200g

One Pouch, Everything: The Light-T12 Portable Accessory Pouch offers an inclusive solution for your daily/travel essentials. Without clutter and loss, keeping things in the palm is a hassle-free solution. External Dimensions: 9.25" x 2.56" x 4.72", Capacity: 1L | Smart-organized: Smart compartment design for excellent organization. Stores your tech gadgets efficiently, ensuring electronic or travel essentials are neatly organized and within reach, whether you’re at home or on the go | Adaptable & Versatile Utility: Ideal for the tech-savvy and beyond, this pouch also adapts to store daily items like keys, pens, and personal items. Whether heading to work or traveling, everything is easily accessible | Excellent Build Quality: Crafted from sustainable RPET 600D Polyester, this pouch is not just about looks and functionality but also about making an ecologically responsible choice without compromising on quality | Convenient & Portable: Designed for portability, the tomtoc tech and travel pouch keep your essentials organized and within reach, fitting seamlessly into a backpack, tote, or handbag, and can stand upright on a desk to grab items easily

Material: Metal | Weight: 190g | This Bowens to Elinchrom Flash Mount Ring Adapter/Converter is compatible with Bowens mount flash light and the Elinchrom accessories such as the Diffuser, Reflector, Snoot, etc. | If you have studio flash with Bowens mount, and Elinchrom lighting accessories, the adapter will be fit for you. | Suitable for all Bowens Mount Studio Flash Strobe

[Compatibility] Compatible with USB-C Input Ring Security Cameras Only (Stick Up Cam Pro, Spotlight Cam Plus). | [Convenience] Karotto Power Adapter Converts your Ring USB-C Security Camera from Battery to plug-in. (But only Charge the Battery of Spotlight Cam Pro ) | [Quality Materials] Power Supply has over current protection, over voltage protection, overload protection, overheat protection, and short-circuit protection,Enables you to charge your ring camera safely. | [Long Cable] Low Impedance Power Cord Long 16ft,Get Nonstop Power from Inside or Outside Power Outlet,Even if the Ring Camera is Far Away | [Package Included] You Can Get 2x 16ft Charging Cable，2x Power Adapter, 40pcs Circle Cable Clips with Ssteel Nail

【Lens Protection & UV Ray Prevent】The UV filter for Mini 4 Pro, prevents the UV ray effect for the image, protecting the DJI Mini 4 Pro lens from dust, and scratches. | 【Imported AGC Optical Glass】Each filter made by imported AGC optical glass, with no effect on the image quality, ensures the restoration of the image's actual color. | 【28 Multi-Layer Coatings】Multi-coated filter utmost reduce the glaring and flares, waterproof, scratch-resistant, dustproof, and oil-proof, protecting your mini 4 pro lens from all-rounds. | 【Gimbal Safe】Extra tough lightweight aviation aluminum alloy frame ensuring great durability, and stable use for a long time flight, will not affect the gimbal calibration and balance of the Mini 4 Pro drone. | 【Package Including】1x Mini 4 Pro UV filter. Each filter comes with a robust filter case.

Creates star effect to a point light source such as the sun, a light bulb, a candle or anything highly reflective | Features four, six or eight primary diffraction spikes which extend from the light source | The upper part of the frame is adjustable to change the direction of star effect when using | Made of premium aluminium alloy and optical glass

One Pouch, Everything: The Light-T12 Portable Accessory Pouch offers an inclusive solution for your daily/travel essentials. Without clutter and loss, a hassle-free solution to keep things just in the palm; External Dimensions: 9.25" x 2.56" x 4.72" | Smart-organized: Smart compartment design for excellent organization. Stores your tech gadgets efficiently, ensuring electronic or travel essentials are neatly organized and within reach, whether you’re at home or on the go | Adaptable & Versatile Utility: Ideal for the tech-savvy and beyond, this pouch also adapts to store daily items like keys, pens, and personal items. Whether heading to work or traveling, everything is easily accessible | Excellent Build Quality: Crafted from sustainable RPET 600D Polyester, this pouch is not just about looks and functionality but also about making an ecologically responsible choice without compromising on quality | Convenient & Stays Portable: Designed for portability, the tomtoc tech and travel pouch keep your essentials organized and within reach, fitting seamlessly into a backpack, tote, or handbag for everyday use

6 screw holes,4-screw-locking design makes the cross bar more flexible for adjustment | One bent pointed tip and one bent flat tip,Jaw opening: 25-120mm | The purpose: Lens repairing, Removal for lens ring | Material: High Quality Antimagnetic Stainless Stee | Fits grip ring of telescope camera lens, optical lens; Opens grip ring of camera body; Fits some two lens graphics cameras

【Transmission】 : The transmission rate is 3 (Mbps), and the longest transmission distance is 10m. Note: This Bluetooth is suitable for older speakers, and 99% cars (some cars do not support usb Bluetooth input, so you need to use its AUX input mode) | 【Operation is simpler】:Insert the usb bluetooth receiver and connect your device with it, the name is "H222" immediately transform your device into a fashionable wireless bluetooth device. | 【 Portable design 】: Small and delicate, portable features let you carry around, it does not need to download APP and plug and play features easily help you to play you phone music | 【 Technology upgrade 】:Bluetooth 5.3+EDR, support A2DP,AVRCP, AVDTP HFP and HSP, let you enjoy high quality music transmission and more stable Bluetooth pairing | 【Wide range of applications】: used in home theaters, mobile phones, karaoke players, speakers, stages, etc.