【New Power Supply Method】This dash cam charger cable gets power from the auto-dimming rearview mirror to power the dashcam, mirror camera, GPS, radar, electronic dongle, phone charger station with wireless charging and so on. Plug and play, perfectly hidden behind the rearview mirror camera. | 【Dual USB Charging Adapter】We provide two USB charging adapters, each outputs 5V2A max, micro/mini/type-c USB charging cable are also included. Please note: the current of a single device is best not to exceed 2A (the current of the dashcam/GPS is about 0.6A), you can unplug one for spare if you only need to use a single USB. | 【Applicable Models】If your car model is not listed in the picture, you can check the number of pins and the appearance of your car's connector, this dashcam power adapter is suitable for select Toyota 2015-2016 Highlander, 2015-2023 Tacoma, 2014-2021 Tundra, 2014-2021 Sienna, Honda Ridgeline and more, and it may be compatible with other makes and models of cars, you can tell us the car model to help you find the correct power adapter. | 【Compatible with USB Devices】The dash cam charging adapter compatible with powering Garmin GPS, dashcam, rear view mirror camera and other USB devices. (Excluding 12VDC barrel jack plug and devices that need to provide 12V through RJ11) | 【Multiple Adapters Supply】We supply all kinds of car type of dashcam power adapters, if you need dash cam power cords for other car models, please search 'Naponal' or tell us the car model. | 【Buy with Confidence】If you purchase the dash cam power cable and are unable to install it, please contact us and we will give you a replacement or refund. If you need more micro/mini/type-c USB charging cable, we will send you.

The Anker Advantage: Join the 80 million+ powered by our leading technology. | High-Speed Compatible: Charge an iPhone 14 Pro to 50% in just 30 minutes when paired up with a compatible Power Delivery charger (charger not included). | Built to Last: Proven in strict laboratory tests to withstand up to 10,000 bends. | MFi-Certified: Designed to work flawlessly with any Lightning device. | What You Get: Anker 310 USB-C to Lightning Cable (6 ft 2pack), welcome guide, our worry-free 24-month warranty, and friendly customer service.

AFOULYKL AUDIO Replacement Horn Diaphragm Compatible with JBL 2414H, 2414H-1, JBL 2414H-C, EON 315, EON-305, EON 610, 210P, 315, 510, 515XT, VRX 928, PRX 415 8OHM | Voice coil: 1" (24.8mm) | Impedance: 8 Ohm | Height of dome: 3.8mm | Please check your speaker model, diaphragm design & sizes before ordering to make sure you are getting the correct diaphragm!!! Please read all instructions before starting replcement. Or watch the video online in our Amazon store. | Diaphragm Material: PEI | Outside Diameter of Diaphragm: 39mm | DCR: 3.6ohms | Outside Diameter of Aluminum Ring: 55.3mm | Wire Material of Voice coil: CCAW

【One adapter, so many options】 NOTE: No focus at infinity, only for macro shots, more suitable for photography with a telephoto lens. Compatible with Minolta MD MC mount lens, Compatible with Canon EOS EF mount cameras. Using the PHOLSY adapter, you can mount the MD-lens on your digital EOS EF-camera instead of the EF-lens | 【No loss of image quality or speed】No focus at infinity, only for macro shots. When using the PHOLSY-adapter, no mechanical or electrical functions, signals or data are transferred between EOS EF system cameras and lenses. So have to manually adjust all settings (no autofocus) | 【New exterior design, solid & durable】Built from aviation grade aluminum and copper, the MOUNT ADAPTER is strong and lightweight with a durable finish, really very resistant and performing for vintage lenses | 【Precisely matched】The lens mount adapter compatible with Canon EOS EF mount camera is well constructed and makes a tight fitting connection to the lens and camera body, to preserve the performance of pro-level cameras and lenses. And it makes a precise fit with the camera and lens, crucial for meticulous performance. Attaches and detaches to the camera body smoothly and cleanly. No light leakage. Keep using the lenses you love with the most innovative camera bodies available | 【Clever design】Easy to mount and dismount. Travel lighter, use one set of lenses with two camera bodies. Best of new and old, use vintage lenses with your digital camera.【Note】You must set in the camera menu to "shoot with no lens attached"

【Function】Position your LiveScope LVS34 transducer on this 0 degree pole mount for an optimal viewing angle while ice fishing (works for open water fishing too). | 【Compatible with】LiveScope Plus LVS34 & LiveScope Plus System. | 【Easy Installation】Includes all the accessories needed for installation, easy to install, save time and effort. | 【High Quality】Made of high quality materials, factory installed and tested many times before shipment. Sturdy, durable and corrosion-resistant, it provides a favorable foundation for your underwater adventures. | 【Warranty Services】Two-year warranty, full refund for any product quality,have any other need feel free to contact us.

SET THE TREND: Show off your own unique style with MightySkins for your Amazon Kindle Fire HD 10 (2023)! Don’t like this Design? We have hundreds of designs to choose from, so your Amazon Kindle Fire HD 10 (2023) will be as unique as you are! | DURABLE PROTECTION FOR YOUR DEVICE: Manufactured with ultra-thin, ultra-durable, stain-resistant laminate vinyl in order to effectively protect your gear from dings, scrapes, dust, and the wear and tear of everyday use! MightySkins a SOFT vinyl skin cover, is not made of rubber, silicone or plastic & it is NOT a HARD case | GOES ON AND COMES OFF EASY: Apply your MightySkins vinyl decal easily & with precision on your Amazon Kindle Fire HD 10 (2023) thanks to a patented low grip air release adhesive that’s built to last but removes easily and leaves no sticky residue when you’re ready to switch to a different design! | Satisfaction guaranteed: Our friendly, knowledgeable staff is here to help and customer satisfaction is our top priority! If you have any issues with your order or you’re not happy for any reason, just let us know and we’ll be there to help! | PROUDLY MADE IN THE USA: Buy with confidence from an American owned and operated company! MightySkins are produced in our state-of-the-art facility in West Palm Beach, Florida, proudly made in the U.S.A.!

ENHANCED SHOOTING PERFORMANCE: Combine the H28 ball head, shooting tripod, and rifle clamp to create a shooting support system for rifles. With this combination, you can freely adjust your shooting posture and angles during hunting/shooting. During breaks, you can completely free your hands-have a drink or enjoy a cigar-without needing to manipulate the shooting system | MULTIPLE ADJUSTMENTS: The tripod ball head features two locking knobs, separately designed to secure the Arca Swiss plate, metal ball, and base. All knobs of the ball head are non-detachable, ensuring easy locking of each component and enhancing the stability of the whole device. Once the knob controlling the metal ball is tightened, it can be slightly pulled out to adjust its position for optimal placement | BUBBLE LEVEL: The ball head has horizontal bubble, not only enhance perception of position, they're also benefit to positioning the gun and control the balance. It is very convenient to control the vertical angle level, operation is more flexible | WIDE COMPATIBILITY: The tripod ball head adopts CNC all-metal process, 28mm diameter ball design, the overall solid and heavy duty. The removable Arca-swiss plate is suitable for most device. The bottom features a 3/8-inch threaded hole and comes with a 3/8 to 1/4-inch threaded adapter included in the package. It can be attached to tripod, monopod, bipod and other shooting stands | PORTABLE, STURDY AND DURABLE: The tripod ball head adopts CNC all-metal process, 28mm diameter ball design, the overall solid and heavy duty

【Compatibility】This case only compatible with All-New Amazon Fire Max 11 (13th Generation, 2023 Release), Note: Incompatible with iPad Samsung 11inch or another 11inch models. Please check your tablet model before ordering. | 【Built-in Screen Protector】Our tablet case comes with built-in screen protector, protecting your tablet screen from dirt and scratches without sacrificing sensitivity and visibility. | 【Multi-layer protection】- Blended with soft shock-absorbing TPU skin and impact-resistant polycarbonate, Unique internal grooves to assist with drop protection and heat dissipation. The outer soft and inner hard structure can provide excellent protection performance, against accidental drops. | 【Built-in Kickstand】The built-in stand that can be easily popped up and collapsed allows you to comfortably access your favorite shows, movies and games at home or on the go. | 【Precise Cutouts】With precise cutouts you can perfectly access all the functions and controls of your Tablet, Like cameras, speakers, charge port, power buttons, Our tablet case must be the right choice for you.

Scratch Resistance: Utilizes advanced nanotechnology to resist scratches and abrasions, extending the dashboard's lifespan. | Stain Resistance: Effectively prevents common pollutants like stains and water spots, reducing cleaning frequency for a better driving experience. | High Transparency: Maintains clear visibility of dashboard information without affecting display quality, ensuring driving safety. | UV Protection: Blocks harmful UV rays to prevent aging and discoloration of the dashboard, extending its lifespan. | Easy Installation: Self-adhesive design enables easy installation at home without professional skills, saving time and cost.

ULTRA-SLIM DESIGN WITH LONGER LIFESPAN: Our ultra thin mouse mover is only 17.3mm thick and 105g net weight. The ultra slim design of our mouse jiggler takes up minimal space on your desk, making it a hassle-free addition to your workspace. And thanks to the ultra slim and lightweight design, it’s very easy and portable to carry it out with you on-the-go. | RANDOM AND NATURAL MICE MOVEMENT: Our device is designed to simulate the realistic random mouse movement, just like you’re using the mouse in person, allowing your system to remain active and preventing it from going into sleep mode or locking up. What’s more, it’s 100% undetectable so you can leave it plugged in without anyone realizing it’s there. It’s a perfect solution for keeping your system active and secure. | ADJUSTABLE INTERVAL TIME: The ultra slim mouse mover comes with an adjustable interval timer with 4 stages settings (10s, 30s, 3min and 1-60s random) for the turntable to stop between each rotation; The time for the turntable to spin is fixed 15s, this is NOT the adjustable intervals). Please press the switch button and set the specific intervals to move the mouse the indicator light on the left side will work simultaneously. And with the ON/OFF button, you can easily turn it on or off. | NOISELESS MOUSE JIGGLER: In order to solve the noise problem of the previous mechanical mouse movers, VAYDEER technology team spent a long time to develop and build a compact ultra quiet micro-motor. Therefore, you won’t be disturbed by any distracting sounds while the mouse mover is in use, keeping you away from the annoying noise. | SUPER EASY TO USE: This upgraded mouse mover is compatible with both windows and Mac operating systems, and requires no additional software and drivers. It’s super easy to use, just plug it in with the type-C cable and let it run. Don’t risk losing your job or having to constantly log back in to your computer!

【Compatible with Blink Sync Module XR 】The Blink MicroSD card with 256GB storage, plug and play, more convenient to view, share, and download locally stored videos from blink outdoor 4 camera.(All-new Blink Sync Module XR Sold Separately) | 【256GB Blink Memory Card】Made of high-quality materials ,using the blink memory card and Blink Sync Module XR together, enhances the connection between other blink devices and makes the blink ecosystem more complete | 【No clutter and Save Space 】The compact Blink Sync Module XR mount features a buckle design that tightly holds and protects your Sync Module XR. Extra custom USB-C short cable will help you out of the messy wires and make installation more convenient | 【No Drilling or Tools Needed】Requires no tools, screws or drilling in your walls. You can install your Blink Sync Module XR in seconds. No damage to your house and control blink outdoor cameras conveniently | 【You'll Get and Customer Service】1*256GB Blink MicroSD Card, 1*Outlet Wall Mount for Blink Sync Module XR, 1*USB-C Short Cable. If you have any questions please contact us, we will give you a satisfactory answer

For Kindle 2024/2022/2019/2016: Designed exclusively for all-new 6" Amazon Kindle (11th Generation 2024/2022 Release)/ Kindle (10th Generation 2019 Release)/kindle (8th Generation, 2016 Release). Not fit other prior generation Kindle devices | Lightweight & Protective: Slim lightweight protective PU leather with premium quality. The no-scratch microfiber interior adds comfort and an additional layer of protection to your kindle 2024 | Making Reading Easier: The stand design makes it easier for you to read your Kindle 2024, and the built-in card slot can store your cards and cash | Enjoyable & Portable: Hand strap can prevent accidental fall, easier for one hand reading. Interior hand strap will ensure the comfortable one-handed use, easy to carry your kindle 2024 e-Reader | Thoughtful Features: Magnetic closure for secure closing. Automatically wakes or puts your kindle 11th generation/10th Gen/8th Gen device to sleep when the lid is opened and closed. Preccise cutouts make it easy access to all features and controls

【Compatitable】Just for Canon EOS R Digital Camera Repair Accessory | 【High Quality 】 Made of premium ABS and metal material, the camera battery door cover is durable, stable and firm. | 【Description】 Commodity No Installation Instruction manual, Pls make sure that you know how to install it | 【Guaranty】Any dissatisfaction, pls feel free to contact us

【Package List 】1x8Pin(4+4) EPS power cable, 2x8Pin(6+2)PCI-e GPU power cable,1x24-pin ATX motherboard power cable. Compatible with motherboards and CPUs of all brands in the market. | 【Upgrade Gold-plated Terminal Design】The pcie cable using gold-plated terminals, better conductivity than tinned terminals and can offer quality power distribution, while having low corrosion resistance and long service life. Ideal for users who pursue ultimate gaming experience and graphics processing performance. | 【High Quality PSU Cable Extension Kit 】2.8mm diameter cables offer a higher quality finish when compared to standard 3.2mm offerings. The 16awg wires and high-density braiding provide a balance between pliability and stiffness for the perfect cable routing solution. | 【Say Goodbye to Clutter】The pc cable extension is made of extremely soft material and comes with transparent cable combs for flexible organization of your case, allowing you to hide the PC power cable at any angle. Made with the latest nylon braid. It is the best choice for DIY computer cases. | 【Confident Purchase】We focus on quality control of raw materials and stylish appearance design to provide the best products to all customers. If you are not satisfied with our products, please contact us by email. We will provide you with a satisfactory solution within 24 hours.

WATERPROOF KEY HOLDER - Perfect for car key or car fob, I.D cards, cash. Use with a running tracker chip an ipod suffle or small mp3 player. Waterproof Wallet for surfing, SUP, Swimming, wind surfing. Also available in different sizes for phones and tablets. | 100% WATERPROOF POUCH - For walking or running in rain, swimming, stand up paddle boarding, surfing, windsurfing, kayaking and all other water sports. IPX8 Certified. Tested to 10m. 3 x 4 inches. | COMFORTABLE, ADJUSTABLE ARMBAND- Soft fabric for your wrist, arm or ankle. We designed a little fabric square so the plastic doesn’t rub on your skin when swimming or running. Alternatively use with the included neck lanyard and tuck it inside your wetsuit. | SILICONE KEY BLADE COVER- Included key blade sheath, stops your key making a hole in the waterproof case or your pocket. We designed this nifty little thing and you can buy extras if you need to. | DESIGNED PROTECTED 6180970 - Part of a range of SwimCell waterproof cases covers pouches and holders for phones, keys and tablets. KEY FLOAT also available. Please visit our shop. WE’RE A UK COMPANY.

【Japanese Gundam Theme Keycaps】As an enduring anime theme, our keycaps of our Gundam 08ms team are mainly to show the unique temperament of Gundam Animation. It is full of mud, stains, rust ... dirty, mixed with gunpowder and sweat odor taste. | 【Dye Sublimation Technology】The dye sublimation technology makes the patterns printed on the keycaps stable、 clear and will not fade, and this keycap uses old processing, some keycaps also draw an extremely detailed painting peel off effect. | 【Premiun PBT Keycaps】This keycap set are made of about 2.0mm thick wall PBT material. matte texture PBT material that are resistant to wear,high temperature, and oil. ensure a better look and user experience. | 【Cherry Profile】The keyboard keycap sets designed with the classic cherry profile, it is ergonomic,you won't get tired even if you use it for a long time. | 【Ultra-Wide Compatibility】This 134 keys keycap set consists of 108 standard keys and 26 supplementary keys compatible with US ASIN/UK ISO layout 60%/65%/75%/87/98/104/108 mechanical keyboards with MX-stem(cross-shaped) swithes. | 【What You Get】134 keycaps and keycap puller. Packed in blister and carton, not include keyboard. The keyboard is just for demo not included.

PERFECT FIT: We've specifically designed the case to fit your Panasonic Lumix GX85/G7 4K Digital Camera/Sony Alpha a6400/a6700/a6100 Lens Camera case. | 100％Safety ：The case is shockproof dustproof and water resistance, protect your favorite device from bumps dents and scratches. | CONVENIENT DESIGN:internal adopt shockproof design,it provides superior and safe storage for cables and small accessories.And the unique double-layer sponge design also make your and accessories well protected. | CONVENIENT DESIGN: Steady hand strap for portability, Inner Mesh pocket design perfectly for accessories , Smooth but strong 360 degree zipper for easy Opening and Closing. | Material:Premium EVA velvet material ,The portable design and ideal size is easy to carry and fit in your handbag and luggage, perfect for travel.For sale is case only (device and accessories are sold separately)。Note ：it doesn't include the equipment 。

CERTIFIED: Wireless motion detectors certifid to R&TTE(CE) and FCCID(USA) | LARGE DISTANCE ALARM: A wireless receiver chimes to alert you when a person or vehicle comes within 400 ft. range (the distance between the sensor and the receiver) | POWERFUL PIR MOTION SENSOR: Powerful outdoor weather-proof infrared sensor detects motion and sends a signal to the indoor wireless receiver; PIR motion detector range approx.9m/29ft; Outdoor sensor certified to IP44 | FEATURE AND WIRELESS POWER SOURCE: 1) Sensor: Passive infrared (PIR) motion detector. Transmitter: 433MHz; With 1 LED indicator; Powered by: 1x 9V (E) (battery not included); 2) Reveiver: Volume Settings: Hi/Low; With 3 LED indicator; Powered by: 3x 1.5V (C) (battery not included) | EASY INSTALLATION: Wireless sensor and wireless receiver make you forget the cables, locate the item anywhere which is perfect for you (you can put the item on table or mounting it on wall as you like); Easy installation, mounting hardware included (3 screws + 3 plugs)

Stylish Aluminum Design: It fits the size of the 2024 Mac mini M4/M4 Pro models with sleek lines. It saves your valuable desk space while allowing you to store peripherals underneath the Mac mini. | Avoid Overheating: It raises your Mac min by 3.6 cm (1.42 inches), creating more space for ventilation and cooling. | Access to Power Button: It leaves a small hole in the stand so that you can easily access to the power button on the bottom of your Mac mini. | Anti-scratch and Anti-slip: It protects your Mac mini with four pieces of silicone mats on the top of the stand to prevent scratches. It stabilizes itself with another four pieces of silicone mats on the bottom of the stand to prevent slipping. | NOTES: It is ONLY compatible with 2024 Mac mini M4 and M4 Pro models. It does NOT support other models of Mac mini.

【72mm Camera Lens Filters】Both CPL and UV filters have a thread size of 72mm. Therefore, they can only work with 72mm photographic lenses. Please carefully check your camera's lens filter thread (marked "Φ72" under the lens barrel). Includes a CPL filter, UV filter, lens cleaning cloth and filter bag | 【Optimize Contrast and Eliminate Reflection】Circular polarizing filter can effectively darken the color of the sky and reduce reflections and flare produced by the surface of water, glass, foliage and other non-metallic surfaces. Use CPL filter to get detailed images with better contrast, especially suitable for shooting blue skies and white clouds | 【UV Protection Filter】Mount the included UV filter on the camera lens to block ultraviolet rays ranging from 300nm to 410nm. With a light transmission of up to 99.8%, the filter effectively prevents the effect of bluish hues on images. It also works as a protective layer to preserve the camera lens from dust, scratches and bumps. | 【Multi-layer HD Optical Glass Construction】Made of high quality HD optical glass, the two filters are protected on both sides by 30 layers of nanometer coatings, which protect them from scratches, dust, fingerprints, water and oil. HD optical glass material helps capture vivid colors and manage contrast without losing image clarity. | 【Super Thin Aluminum Frame】Securely framed by an ultra-thin aluminum alloy frame, both filters produce the desired effect without generating dark corners or vignetting, even when mounted on wide-angle lenses. The non-slip pattern on the frame ensures a stable and comfortable grip.

SET THE TREND: Show off your own unique style with MightySkins for your Amazon Kindle Scribe (2022)! Don’t like this Design? We have hundreds of designs to choose from, so your Amazon Kindle Scribe (2022) will be as unique as you are! | DURABLE PROTECTION FOR YOUR DEVICE: Manufactured with ultra-thin, ultra-durable, stain-resistant laminate vinyl in order to effectively protect your gear from dings, scrapes, dust, and the wear and tear of everyday use! MightySkins a SOFT vinyl skin cover, is not made of rubber, silicone or plastic & it is NOT a HARD case | GOES ON AND COMES OFF EASY: Apply your MightySkins vinyl decal easily & with precision on your Amazon Kindle Scribe (2022) thanks to a patented low grip air release adhesive that’s built to last but removes easily and leaves no sticky residue when you’re ready to switch to a different design! | Satisfaction guaranteed: Our friendly, knowledgeable staff is here to help and customer satisfaction is our top priority! If you have any issues with your order or you’re not happy for any reason, just let us know and we’ll be there to help! | PROUDLY MADE IN THE USA: Buy with confidence from an American owned and operated company! MightySkins are produced in our state-of-the-art facility in West Palm Beach, Florida, proudly made in the U.S.A.!

SET THE TREND: Show off your own unique style with MightySkins for your Amazon Kindle Scribe (2022)! Don’t like this Design? We have hundreds of designs to choose from, so your Amazon Kindle Scribe (2022) will be as unique as you are! | DURABLE PROTECTION FOR YOUR DEVICE: Manufactured with ultra-thin, ultra-durable, stain-resistant laminate vinyl in order to effectively protect your gear from dings, scrapes, dust, and the wear and tear of everyday use! MightySkins a SOFT vinyl skin cover, is not made of rubber, silicone or plastic & it is NOT a HARD case | GOES ON AND COMES OFF EASY: Apply your MightySkins vinyl decal easily & with precision on your Amazon Kindle Scribe (2022) thanks to a patented low grip air release adhesive that’s built to last but removes easily and leaves no sticky residue when you’re ready to switch to a different design! | Satisfaction guaranteed: Our friendly, knowledgeable staff is here to help and customer satisfaction is our top priority! If you have any issues with your order or you’re not happy for any reason, just let us know and we’ll be there to help! | PROUDLY MADE IN THE USA: Buy with confidence from an American owned and operated company! MightySkins are produced in our state-of-the-art facility in West Palm Beach, Florida, proudly made in the U.S.A.!

10Gb SFP+ Cable: 10G SFP+ to SFP+ DAC Twinax cable assembly support 10 Gbps data rate, 10GBASE-CU Passive, 4 meter (13.12 ft), 26 AWG; DAC Length includes 2 SFP+ connectors | Multi-brand Compatible: Perfect for Cisco SFP-H10GB-CU4M, Ubiquiti UniFi UC-DAC-SFP+, Meraki, Mikrotik, Intel, Fortinet, Netgear, TP-Link, Linksys, Broadcom, Zyxel, Quanta, Solarflare, PaloAlto, F5, etc. | Efficient Design: 10Gb SFP+ DAC cable is a good alternative to link 10G SFP+ ports, with low-cost, low power consumption and low latency; All products are passed by TDR & VNA tests in our Signal Integrity Lab | Extensive Application: 10Gb SFP+ cable widely used in various devices, such as Fiber Switch, Storage, Router, Server,Firewall, NIC, Media Converter, Date Center and Other fiber optic equipment with SFP+ ports | Friendly Service: Provides 24/7 Customer Service, 30 Days Free-returned, 3 Year Free Warranty and Lifetime Technology Support

Clutter-Free Charging and Storage Station: Coby’s Wall Mount keeps your 2 nd Generation Echo Dot in one, safe and easily accessible place while double-dipping as a charging station. | Anchors to Wall Outlet: CSHA-101 is a breeze to install because it’s engineered to frame you’re A/C wall outlet while being anchored in place by the Echo’s power adapter. | Compact Charging Cable Included: In keeping with the compact design of the Echo Dot and the Coby Wall Mount we have included a short, 7.5-inch USB charging cable. No more loose cables to trip over. | Non-Slip Device Grip: Hide and neatly store the second-generation Echo Dot. (Echo Dot Not Included.)

Provide online user manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32), please check the manual carefully before using! | Partial Refresh Support, Low Power, Wide Viewing Angle, Paper-Like Effect | No backlight, keeps displaying last content for a long time even when power down | Ultra low power consumption, basically power is only required for refreshing | Refresh time: The refresh time is the experimental test data, the actual refresh time will have errors, and the actual effect shall prevail. There will be a flickering effect during the global refresh process, this is a normal phenomenon.

SET THE TREND: Show off your own unique style with MightySkins for your Amazon Kindle 6-inch 11th Gen (2022)! Don’t like this Design? We have hundreds of designs to choose from, so your Amazon Kindle 6-inch 11th Gen (2022) will be as unique as you are! | DURABLE PROTECTION FOR YOUR DEVICE: Manufactured with ultra-thin, ultra-durable, stain-resistant laminate vinyl in order to effectively protect your gear from dings, scrapes, dust, and the wear and tear of everyday use! MightySkins a SOFT vinyl skin cover, is not made of rubber, silicone or plastic & it is NOT a HARD case | GOES ON AND COMES OFF EASY: Apply your MightySkins vinyl decal easily & with precision on your Amazon Kindle 6-inch 11th Gen (2022) thanks to a patented low grip air release adhesive that’s built to last but removes easily and leaves no sticky residue when you’re ready to switch to a different design! | Satisfaction guaranteed: Our friendly, knowledgeable staff is here to help and customer satisfaction is our top priority! If you have any issues with your order or you’re not happy for any reason, just let us know and we’ll be there to help! | PROUDLY MADE IN THE USA: Buy with confidence from an American owned and operated company! MightySkins are produced in our state-of-the-art facility in West Palm Beach, Florida, proudly made in the U.S.A.!

Compatibility: only for iPad Pro 11ʺ (5th Gen, 2024); models: A2836, A2837; not compatible with any other iPad models | Convenient Magnetic Attachment: magnetic edges allow for easy attachment to your iPad screen when it’s time to create and quick removal for a flawless view of your original display, while the protective envelope keeps your screen protector safe on the go | Feels Like Paper: specially treated surface provides a professional-level drawing surface that transforms your tablet into a digital canvas or notebook | Bubble-free: the convenient magnetic attachment makes it easy to snap on without any air bubbles interfering with your view of the screen | Works with a Tempered Glass Screen Protector: compatible with a tempered-glass screen protector that is less than 0.33 mm thick and can be used with the magnetic protector without scratching the screen, providing double the protection | Complete Customer Support: detailed setup videos and FAQs, comprehensive 12-month warranty, lifetime support, and personalized help

Compatible with Dell Alienware M18 R1, M16 R1 2023 gaming laptop series. | Supports with M.2 2280 (22 x 80 mm) Solid-state drives ONLY. (CAUTION: ALL Heat-sink cover from OEM Factory, NOT a COPY COVER, the Thermal Radiation better than COPY plate.) | Help you Installing the M.2 2280 solid-state drive in Slot ONE (SSD1) and Slot TWO (SSD2). | Compatible D P/N: K3RRF, 0K3RRF, CN-0K3RRF. Manufacturer Part Number(s): 46M.0RVMS.0002 | Each Pack come with: 1x M.2 2280 SSD Heat Thermal Shield, 2x Screws. (CAUTION: DON't directly touching thermal pads with fingers performing the installation process.)

D-Tap Connector to DMW-BLK22/DMW-DCC17 Decoded Dummy Battery DC Coupler Power Adapter Cable for Panasonic LUMIX DC-S5, S5K, S5II, S5IIX, S5GK, GH5II, GH5 Mark II, GH6, G9, G9II... | Enables you to use external power source with your camera to achieve long time shooting, no need to replace camera battery again and again. | Full decoded, support to display the battery status. The adapter cable is designed with voltage conversion circuit and circuit protection. | Compatible with V-mount battery and Gold-mount battery or battery plate with D-tap output. | Straight length 35cm/13.8", extended length 100cm/39.3". Required input: 12V-16.8V; Output:8V/3A.

Compatible with Nikon SLR / DSLR Models. including: D1, D2, D3, D3S, D3X, D35, D4, D40, D40X, D50, D60, D70, D80, D90, D100, D200, D300, D300S, D600, D700, D750, D800, D800E, D810, D3000, D3100, D3200, D5000, D5100, D5200, D7000, D7100, etc. Note: it doesn't fit mirrorless cameras. | Three ways to use it'. 1. A 2x barlow; 2. a universal 1.25-inch Camera T-Adapter; 3. 1.25-Inch Telescope Eyepiece Extension Tube. | Works on most brands of telescope. | The barlow is made from quality coated optics and metal Framework. | Precisely CNC-machined.

【Kanagawa PBT Japanese Keyc aps】The Classic pattern kanagawa matching with MOA keycaps is refreshing. The keycaps cover adopts advanced five-sided dye-sub process, which has higher adaptability to Japanese key cap characters, is not afraid of oil stains and has long service life. | 【MOA Keycaps】The upgraded MOA profile keycap is more beautiful than XDA keycap. Ergonomic comfort allows you to use stress-free Arc layout, concave arc, the area where fingers touch the keycap is larger, and the touch is more silky. Give you the highest comfort when using. | 【Dye-Sublimation Keyboard Keycaps】This keycap is made of high quality PBT key material, with matte texture and wear resistance. Keycaps with thickness will make users feel more texture. The pattern on the keycap adopts dye sublimation technology, and the pattern will never fade. | 【Keycaps Set Compatibility】It can be used for ASIN US and UK layout mechanical keyboard. And it’s compatible for 60%/65%/75%/80%/100% keyboards. The keycaps are compatible with any key switches with cross-shaped switches. It is a good choice for you to DIY your mechanical keyboard. | 【Custom Keycaps Tips】Including full-size keycaps and a keycap puller, not include keyboard. The keyboard in pictures only to showcase. If you have any problem with the product you received, please contact us. We will always be there until your problem has been solved.

CeaMere Printhead Printer Print Head Cable | Compatible with Epson 1390 1400 1410 1430 R260 R360 R380 R390 RX580 RX590 L1800 1500W EP4004 | This has been tested many times to ensure negative film holder performance as original quality.

Double CPU and upgraded chip for improve coverage and detection (0-2.5m) | Water-resistant, anti-freeze, operating temperature:-40 ~ +80. Work in almost any weather | BiBiBi beeps progressively when close to obstacle | Rated working voltage:10V~16V DC | Easy to install

【SPECS】 Input: 100-240VAC 50/60Hz, Output: 7.4V/2A 14.8W; AC cable 1.2M, DC cord 1.5M | 【SAFE & RELIABLE】ABS + PC materials, class VI energy efficiency, high quality chip, Overcharge, Temperature, Overcurrent, Shortage, Overvoltage, Lightning Protection, UL CE ETL FCC SAA PSE RoSH safety certification. | 【COMOPATIBLE MODEL】 ACK-E10 AC Power Adapter Kit for Canon EOS Rebel T3 T5 T6 T7 1100D 1200D 1300D 1500D 2000D Kiss X50 X70 X80 X90 Cameras. | 【FUNCTION】 DR-E10 Dummy Battery Kit Replacement Canon LP-E10 battery, to solve the trouble of frequent battery replacement, to continuous power for the camera, to meet long-term shooting of pictures and vlog videos. | 【WHAT YOU GET】 1 * ACK-E10 Power Adapter, 1 * DR-E10 Dummy Battery, Please feel free to contact with us for any questions.

SET THE TREND: Show off your own unique style with MightySkins for your Amazon Kindle 6-inch 11th Gen (2022)! Don’t like this Design? We have hundreds of designs to choose from, so your Amazon Kindle 6-inch 11th Gen (2022) will be as unique as you are! | DURABLE PROTECTION FOR YOUR DEVICE: Manufactured with ultra-thin, ultra-durable, stain-resistant laminate vinyl in order to effectively protect your gear from dings, scrapes, dust, and the wear and tear of everyday use! MightySkins a SOFT vinyl skin cover, is not made of rubber, silicone or plastic & it is NOT a HARD case | GOES ON AND COMES OFF EASY: Apply your MightySkins vinyl decal easily & with precision on your Amazon Kindle 6-inch 11th Gen (2022) thanks to a patented low grip air release adhesive that’s built to last but removes easily and leaves no sticky residue when you’re ready to switch to a different design! | Satisfaction guaranteed: Our friendly, knowledgeable staff is here to help and customer satisfaction is our top priority! If you have any issues with your order or you’re not happy for any reason, just let us know and we’ll be there to help! | PROUDLY MADE IN THE USA: Buy with confidence from an American owned and operated company! MightySkins are produced in our state-of-the-art facility in West Palm Beach, Florida, proudly made in the U.S.A.!

➤ SPEAKER WIRE CONNECTORS: BlueRigger 24pcs/12pairs speaker banana plugs are perfect for fitting your speaker wires directly into binding posts, without having to screw and unscrew the wires. Banana bolt clips are compatible with speaker wires of diameter 4.5mm (8 to 18 AWG) | ➤ EASY INSTALLATION: To install the BlueRigger speaker terminals connectors, simply strip the wire, insert it into the banana plug, tighten the screws and refit the outer sleeve onto the plugs | ➤ WIDE COMPATIBILITY: BlueRigger speaker plug audio jack connectors are compatible with amplifiers, speakers, speaker wire, A/V Receiver, surround sound system, banana wall plate and home theater | ➤ SUPERIOR BUILD: BlueRigger male speaker connectors have an outer sleeve made of aluminum and gold-plated connectors to avoid EMI interference and maximize signal strength. The heavy duty solderless banana plugs are color coded to ensure polarity and distinguish left from right | ➤ LIFETIME WARRANTY: BlueRigger Lifetime Warranty and US-based Customer Support

★COMPATIBLE WITH : for Lumix DMC-GF6,DMC-GF5,DMC-GF3,DMC-GX7,DMC-GF3K,DMC-LX100, DMC-S6,DMC-S6K,DMC-ZS60,DMC-ZS110,DMC-GX80,DMC-GX85,DMC-GX85K,DMC-GX86CGK, DMC-GX7 MARKII ,DMC-TZ85. | ★ DC drive cable can not only play the role of power adapter,while also serving to effectively suppress harmonic current noise. | ★ High-quality chips,DC-DC converter,high conversion efficiency.Good stability,can output high current,quiescent current is small. | ★ Magnetic ring anti-jamming design,enhance the stability of the camera work.Using a wide range,suitable for all 7.2V-8.4V digital camera and video camera, Support part 9 v digital products | ★ DC drive cable connected power bank supply for digital cameras, power bank capacity: 8000-30000mAh,equal to the new battery in the camera's power many times;When you turn on the flash to take pictures or video,to provide uninterrupted power supply.

▶Compatible Air Filter for Powerlite 470 Powerlite 475W Powerlite 480 Powerlite 485W BrightLink 475Wi BrightLink 480i BrightLink 485Wi EB-470 EB-475W EB-475Wi EB-480 EB-480E EB-485W EB-485Wi EB-1410Wi EB-1400Wi Projector | ▶Replacement elpaf40 filter are produced with reference to the original design, which is safe for humans and pets. | ▶Designed for extreme environments,Protects from harmful dust and smoke fumes,slowing down operation and prevents damaging your projector. | ▶Easily and quickly replaceable，We recommend replacing the filter with a new one every year。 | ▶Any problem contact us, we will solve for you.

Compatibility: only for iPad Pro 13ʺ (7th Gen, 2024); models: A2925, A2926; not compatible with any other iPad models | Convenient Magnetic Attachment: magnetic edges allow for easy attachment to your iPad screen when it’s time to create and quick removal for a flawless view of your original display, while the protective envelope keeps your screen protector safe on the go | Feels Like Paper: specially treated surface provides a professional-level drawing surface that transforms your tablet into a digital canvas or notebook | Bubble-free: the convenient magnetic attachment makes it easy to snap on without any air bubbles interfering with your view of the screen | Works with a Tempered Glass Screen Protector: compatible with a tempered-glass screen protector that is less than 0.33 mm thick and can be used with the magnetic protector without scratching the screen, providing double the protection | Complete Customer Support: detailed setup videos and FAQs, comprehensive 12-month warranty, lifetime support, and personalized help.

Thunderbolt 4 Cable