DB37 male adapter to bare wire,Each wires end is equipped with red cold crimping terminals（Red copper material）, which are firmly crimped and do not fall off. | D-SUB 37 PIN- connector All pins are copper core gold-plated connectors, with good plug resistance and contact. | 37 wire cores are made of 26AWG tinned copper, with a diameter of 1.0mm per core and a cable outer diameter of 9.0mm. Wrapped with aluminum foil+high-density woven mesh to form double-layer shielding, with strong anti-interference ability. | DB37 male to bare wire cable with cable marker,Plug and play, Easy to use,Line numbers are clear. Straight-through wiring (i.e. pin 1 to pin 1) design per industry standards | DB37 extension cable can be used for automatic control equipment, PDA, modem, PLC, POS, industrial control equipment, cash register, tax control computer, computer, etc.

Compatible with Dodge Ram 1500 (2009-2010); Dodge Ram 2500 2010; Dodge Ram 3500 2010; Dodge Avenger (2007-2010); Dodge Caliber (2009-2010); Dodge Challenger (2008-2010); Dodge Charger (2008-2010); Dodge Dakota (2008-2010); Dodge Durango (2008-2009); Dodge Grand Caravan (2008-2010); Dodge Journey (2008-2010); Dodge Nitro (2007-2010); Dodge Magnum 2008 | Also Compatible with Chrysler 300 (2008-2010); Chrysler Aspen (2008-2009); Chrysler Sebring (2007-2010); Chrysler Town & Count (2008-2010); Wrangler (2007-2017);Commander (2008-2010); Compass (2009-2010); Grand Cherokee (2008-2013); Patriot (2009-2010); Liberty (2008-2013) | If you car year after 2010 that touch screen digitizer will different we are selling! | Replacing touch screen: Loss of response to touch commands, scratches, cracks, dead pixels, or the polarized protection is wearing off.

Anti-reflection: suppresses unwanted reflections from non-metallic surfaces such as water, glass, etc. for haze-free images. | Increased Saturation &Contrast: for enhanced white clouds on blue skies. | Unchanged Color Balance: does not affect the overall color balance on the final image. | Low-profile frame: to avoid vignetting even with wide-angle lenses. | Beginner friendly

1.FILMEXT high-grade 15.6 inch(16:9，WIDTH: 13 9/16" (345 mm), HEIGHT: 7 5/8" (194 mm)) laptop privacy screen is perfectly compatible with HP Pavilion 15.6, HP ChromeBook 15.6, HP Stream 15.6, Acer Chromebook 15.6, Acer Chromebook 314/514, Acer Aspire 15.6, Asus Chromebook C425 and Asus VivoBook 15.6 ,【Note: The Filter only covers the display area of your tablet computer screen, not the border area.】 | 2.【Keep Your Eyes & Screen Privacy Safe 】FILMEXT 15.6 inch laptop privacy screens privacy angle is 30 degrees ±5, transparency is 60%±5, thickness is 0.35mm. Data is only visible in front of the display, appears a darkened or black screen from side view, with anti-glare and blocks 35% blue light feature, protects your eyes and prevents reflection from strong light, reduces stress on your eyes from daily glare & UV light,Blue light and helps protect your screen from damage and dust. | 3.FILMEXT 15.6 inch laptop privacy screens is suitable for a variety of public places, business meetings, open-style offices, financial institutions, cafes, airplanes, trains etc., protects your sensitive information, your passwords, personal content etc., which might be leaked. | 4.【Bubble-Free Installation】 2 Installation soluction are available for your reference, | Tips: Privacy feature appears difference under different screen brightness and user environment, the lower screen brightness to 50-75%, the better privacy, the stronger sunshine light, the better privacy feature too. If you have any doubts on product or installation, we will do everything within our power to make sure you are satisfied.

𝐏𝐄𝐑𝐅𝐎𝐑𝐌𝐀𝐍𝐂𝐄- Whether out on the trails or on the road you want to ensure that every element of your bike is built for performance. For too long out front mounts for Garmin cycling computers have been lagging. We built our out-front mount to be the best, improving upon the common problems with other mounts. When cycling you want a sturdy mount arm that shows your cycle stats without any movement. Even when pressing the Garmin computer's buttons or touch screen. | 𝐂𝐎𝐌𝐏𝐀𝐓𝐈𝐁𝐋𝐄 The Corki Cycles Garmin Bike Mount is compatible with Edge 130, 200, 500, 510, 520, 810, 820, 1000, and 1030. Coming in multiple colors, accessorize and match the color of your road or mountain bike. | 𝐒𝐀𝐅𝐄𝐓𝐘 - riding safety is paramount. Distractions on the road or trails can and often do end in crashes. With the Corki Cycles Out front Garmin Computer mount, it's always locked in position. Fitting your handlebar with a diameter of up to 25.44mm. Secure the mount with no fiddling or adjusting needed afterward. Alter the extended arms angle on your handlebar with your Garmin Edge Computer attached to find that comfortable head-up position for effortless enhanced cycle safety. | 𝐅𝐔𝐍𝐂𝐓𝐈𝐎𝐍𝐀𝐋 - Not all handlebars are the same. Whether you are attaching your out-front computer mount on a MTB or road bike. The handlebar diameter will vary amongst brands. At Corki Cycles our Garmin mount features extra spacers for those that have a smaller handlebar. Adjust and attach to your handlebar with an Allen key. The Corki Cycles Garmin mount is made from Aluminum 6061 and weighs 54g/1.62oz. | 𝐋𝐈𝐆𝐇𝐓𝐖𝐄𝐈𝐆𝐇𝐓 - The mount is both lightweight and strong for years of use. Clip your Garmin cycle computer to the out front mount placing horizontally and then rotate 90 degrees locking securely into position. | 𝐀𝐂𝐂𝐄𝐒𝐒𝐎𝐑𝐈𝐄𝐒- With every Garmin out front cycle mount attach underneath more accessories. The underside adapter features a universal GoPro or DJI camera attachment. Attach your GoPro and record the trails as you monitor your stats and location on your Garmin computer. In addition to the camera mount, use the rubber attachment and clip a cycling torch to the out front mount for those night rides. Attach all these accessories without having to adjust or tighten your mount! | 𝐆𝐔𝐀𝐑𝐀𝐍𝐓𝐄𝐄- The Corki Cycles Garmin out front bike mount comes with a lifetime warranty. The Corki Cycles motto is - Cycling For A Lifetime, and it's why we provide a lifetime guarantee for all customers. Use your Garmin computer on every ride with a functional and easy-to-use mount. Contact our friendly customer service for further information for help, warranties, or returns.

The 4-pack lens filter kit is compatible with GoPro Hero 11 Black / Hero 10 Black / Hero 9 Black camera. | The package includes CPL, ND8, ND16, ND32 filters and a hard plastic case to protect the filters. | Made of high grade multi-coated optical glass which provides crystal clear footage, and the accurate size makes it fit for the GoPro Hero 9 10 11 Black camera perfectly. | CPL filter (Circular Polarizing) helps to remove unwanted glare and ghosting from reflective surface such as reflections of water, snow, metal, and glass windows. It also provides color and contrast enhancement by reducing glare of water or the sky. | ND filter (Neutral Density) reduces the amount of light coming into the camera sensor. It also helps balance the image contrast and capture rich color sharp footage under various daylight conditions.

works with the MB Quart GMR-LED powersports digital media receiver | mounts securely to steering wheel with included strap | enjoy fingertip control over your receiver's functions

Equivalent to dymo LetraTag 91331 S0721660 labeling tape refills. Color: Black on White. Size: 1/2"(12mm) Width x 13'(4m) Length. Material: Thermal plastic paper. | This polyester white plastic label tape is wipe-able, tear-resistant, long-lasting, and easy-to-use. Self-adhesive with easy to peel backing. | The label cassettes are Compatible with DYMO LetraTag label maker printers, including LetraTag, LetraTag Plus LT100H, LetraTag Plus LT100T, LetraTag QX50, XR, XM, 2000, LetraTag QR | These 1/2 inch label maker refills for indoor use to conveniently create easy to read labels at home, in the office, etc. Used for labeling files, folders, books, accessories. And are ideal for labeling office supplies, tools, kitchen items, garage equipment, and more. | [Material] The 91331 plastic label refill is made from polyester plastic paper.

【IPX8 Waterproof】IPX8-certified waterproof guards against water to a depth of 3.3 feet, great in the rain & dogs can swim with it, better protect both AirTag and its battery | 【Fully Enclosed】Other designs let AirTag get scratched or damaged and attract thieves attention (Sound and signal still pass through) | 【Discreet】Awesome to discreetly secure your AirTags, thieves won't notice it's concealing an AirTag | 【Minimal】Compact two-piece design provides excellent protection for AirTag without adding any extra bulk to your keychain and other high-value belongings | 【Indestructible】Unbreakable hard PC material, break it and we will replace it | 【Simple to Install & Secure】Easy to install your AirTag with the included stainless steel hexagonal screws and allen wrench, there is no chance for the AirTag to fall out or slip off | 【Multipurpose Uses Design】Thanks to the included key ring, loop strap and 3M adhesive mount, this holder provides so many uses - on keychain, dog collar, backpack, luggage bag, camera case, bike, car, vehicles, travel gear - everything you'd want to find if lost or stolen | 【What You Get】Protective Case x 4, 3M adhesive mount x 4, loop strap x 4, key ring x 4, spare hexagonal screw x 16, allen wrench x 1, instruction manual x 1 and 1-year warranty

【Dual-Port Gigabit】 The network card has 2 port gigabit ethernet RJ45 interfaces, with Intel 82575/82576 chip, compatibe 100M/10M auto-negotiation, support standard Cat5e or above UTP at distances up to 100m (328 feet) | 【PCIe Slot】Compatible for PCIe slot X1,X4,X8,X16, default with standard bracket, also include low profilce bracket, support multiple installation such as PC, server, client, workstation, NAS, etc. **not for PCI slot** | 【Multiple OS】Support Windows10/8.1/8/7/Server 2016,2012,2008, Linux, freely driver download, CD-ROM, manual, Binardat/Intel official website can download the driver easily. | 【Network Feature】Support PXE, Auto MDIX, IEEE 802.1Q VLAN tagging, Full Duplex flow control(IEEE 802.3x), 9.5Kbytes Jumbo frame, PCI Express 2.1 (2.5 GT/s) | 【Easy to Use】Select the appropriate brackets according to the chassis size, insert into the PCIe slots, install the driver, connect to the network, the LEDs show the link status and rate. Any questions, please contact our support email, we will provide timely service.

1000x filter factor, providing a 10-stop exposure reduction which allows you to control depth of field and convey movement more easily | Darkens entire image, allowing you to photograph with a wider aperture or slower shutter speed than normally required, suitable to record movement/image blur in subjects such as waterfalls, streams, waves, clouds or any fast moving subject | It does not affect coloration of the image and is ideal for pairing with other filters, unlike a variable ND filter which could cause "X" cross mark, vignetting, reflections or blur in the picture when using wide angle lenses at higher ND values, this ND1000 fixed 10-stop neutral density 3.0 filter does not have this kind of issue. | The filter is constructed from Japanese famous brand optical glass that features 8 layers of anti-reflection coatings on each side(total 16 layers), making the filter anti-scratch, anti-static, oil and water-resistant | Compatible with any lens with 67mm diameter filter thread - This ND1000 filter is double threaded, has 67mm inner thread(male) and 67mm outer thread(female), this design allows you to put on any 67mm thread accessories such as lens cap, screw-in type lens hood to the front of the filter

【Stroller Fixing Tablet Holder】This clip-on stand is specially designed for stroller handlebars. The diameter of the clip is adjustable from 0.65 to 1.95 inches, almost all strollers on the market can be used. The place where the clip contacts the handlebar has a non-slip rubber protection, which not only acts as a non-slip, but also protects the handlebar from scratches. | 【Easily Adjust Operate With One Hand】The ball head design allows you to easily adjust the tablet to the desired angle with one hand. The long-arm design with built-in aluminum tubes with total length of 15 inch allows you to bend easily to enhance its adjustability, and bend to an S-shape to enhance the overall stability of the stand. | 【Non-slip Cradle】The two-end of the cradle set a U-shaped gap that will not block charging port of your tablet. You can safely use your tablet for something you want. The surface of the cradle has non-slip silicone where it contacts the tablet device, which can effectively protect your tablet from slipping and scratching. | 【Easy To Travel With Your Baby】This flexible tablet stand is a must-have for every mother, allowing you to do things you like while taking your baby, such as editing text messages, watching movies, listening to music, taking photos, and shooting videos and many more. Completely liberate your hands, without the need to hold the baby in one hand and reply to the message, so that you can travel without worry. | 【Universal Compatibility】: This Tablet mount works with all 4.7-11 inch devices, such as new iPad Mini 6, iPad Air 4, 2020 iPad Pro 10.5, iPad Pro 9.7, iPad Pro 11, iPad 10.2, iPad Air, iPad Air 2, iPad mini 2 3 4, Accessories, Galaxy Tab, iPhone 14 Pro Max, iPhone 13 Pro Max, 12 11 Pro Max, Xs, X, smart phones and other tablets. ❗ Suit for 4.7 - 11inches devices is refers to the length of the device diagonal, not the device's width.

【Multifunctional and durable holder】The mounting bracket is an automotive grade raw ABS material. The clamp is firmly attached to the pole (guaranteed that it won't rebound when you run like a madman on a treadmill!) It's durable and can withstand strenuous exercise. Great for fitness enthusiasts such as treadmills! | 【Outstanding Safety Holder】woleyi gooseneck long arm tablet holder with flexible bendable arm and 360 degree rotation ball joint that provide optimal viewing for you. The non-slip and shake-resistant clamp base keeps your device securely on the handlebar and ensure the smooth exercise experience for you. | 【Wide Application】This handlebar mount has adjustable clamps and is suitable for most handlebars / poles / tubes (range: 0.62-1.77inch in diameter). You can safely hold the device on a Indoor Cycling Bike Stationary / exercise bike / spin spinning bicycle / elliptical machine / Gym treadmill / wheelchair / golf cart / stroller / stationary bicycle / indoor bike. | 【Broad compatibility】This universal handle bar tablet holder, the adjustable side clamps extend from 4.7 in to 10.2 in, compatible with all 4 - 11 inch smartphones and tablets, such as new iPad Pro 9.7 / 10.5 / 11, iPad Air 2, Air 3, Air 4, iPad Mini 1/ 2 / 3 / 4 / 5, iPhone 12, 12 mini, 12 Pro, 12 Pro max, 8, 8 Plus, X, XS, XR, XS Max, 11, 11 Pro / 11 Pro Max, Galaxy Tab/ Galaxy Note/ Galaxy S and more cell phones or devices. | 【A Well Fitness Partner】This treadmill tablet mount, can keep the tablet at appropriate distance from your eyes. Adjustable design provide you with best angle to watching fitness instruction video or TV show.Great for following sports channels on your tablet while exercising on a treadmill or gym cardio training equipment with handlebars and elliptical trainer machines.

【Versatile Long Arm Car Holder】The car holder designed for tablet and smart phone.You can easily install the suction cup to windshield or dashboard with no tools needed.13" extra-long, ultra-flexible arms allow you to easily adjust the device within reach and easily access your tablet screen.Strong compatibility, not only suitable for small cars, but also for large trucks.Perfect for navigating, watching movie, shooting live, browsing web, or making video call use while break. | 【360 Degree Rotatable】The tablet holder phone mount for car windshield features a 360-degree rotating head and a flexible gooseneck arm, which ensure your iPad can be positioned horizontally, vertically, or at any angle as well as keeping your phone visible and handy on any road.You can freely adjust the bendable long arm to within reach position to ensure your more relaxed and safer drive. | 【Enhanced Washable Suction Cup】The suction cups are made of high viscosity silicone material, it is sticky and you can stick the suction cup securely to the car windshield, dashboard or other smooth surface.when the viscosity is insufficient,you can wash the sucker base and then let it air dry,the suction power will as always. This suction cup can withstand -4℉-158℉ temperature, no matter a brake hard,a sharp turn, or driving on bumpy road or at extreme weather, it is always stable. | 【Universal 2 IN 1 Broad Compatibility】This universal car holder tablet holder fit for all 4.7"-12.4" inch screen smartphones and tablets, such as new iPad Pro 9.7 / 10.5 / 11, iPad Air 2, Air 3, Air 4, iPad Mini 1/ 2 / 3 / 4 / 5, iPhone 13, 13 Pro, 13 Pro Max, iPhone SE, iPhone 12, 12 Pro, 12 Pro Max, iPhone 11, XS, XS Max, XR, X, 8 Plus, 8, 7, 7 Plus, 6 Plus, 6, Galaxy Tab/ Galaxy Note/ Galaxy S and more cell phones or devices with or without a case or sleeve. | 【Your Satisfaction Guarantee】WOLEYI strives for excellence in both product and customer service.you can enjoy LIFETIME SUPPORT, HASSLE FREE RETURNS, MONEY BACK GUARANTEED! √NOTE1:Do not use the extra stabilizer for windshield/galss/window mounting. √NOTE2:Clean the windshield or dashboard surface before installation. √NOTE3:Please tear off the transparent protective film at the bottom of the suction cup before installation.

☞Compact design with built-in dimmer control. | ☞With UL certificaiton aprroval,U.S standard plug. | ☞1 year warranty against manufacturing defects. | ☞Power supplies: 110V-240V/50HZ,60HZ auto switching. | ☞144 LED ring light provides cool,strong focused shadow-free illumination.

Remotely release the shutter without troublesome shake physically touching the shutter button | Supports auto-focus, shutter release, bulb exposures, start/stop video recording, and lens zoom control (Only for Sony power zoom lenses) | Wake your camera when it gets into Sleep Mode with just a single press and trigger it with a press | Use for a broad range of images, like low-light, self and family portraits, macro photography, shooting timid, aggressive or dangerous animials, Bulb Use for long exposures | Compatible with Sony a1, ZV-1, ZV-E10, a6100, a6400, a6600, a7 IV, a7 III, a7C, a7R III, a7R IIIa, a7S III, a7R IV, a7R IVa, a9, a9 II, ILME-FX3, DSC-RX0 II,DSC-RX100 VII

【VERTICAL SHOOTING】Designed for Dji Ronin SC Gimbal,this L Bracket allows you to shoot vertically with your dji sc gimbal.And comes with 2*50g counter weights to help you keep the stabilizer in balance. | 【Special Design】Both the vertical and horizontal plate adopt standard arca-type,and the hollow design reduces weight, only 71g, making it easier to balance the stabilizer. Vertical plate with 85mm/3.35" long chute to fit more cameras, easier to adjust camera height position. | 【Portable Expansion】Comes with three 1/4 inches screw hole on this L plate, can be used for overall balance and other photography equipment.Includes two 50g counter weights to help you better adjust the balance during shooting. | 【Aluminum Material】This Dji SC L vertical plate is made of Premium aluminum to avoid unexpected damage and durable use.CNC waterproof and antirust treatment,makes it waterproof and rustproof. | 【Precise Control】Non-slip mats on both plates and scales on horizontal plate to help you control the camera position more precisely and protect your device from scratches at the same time.

【Long playing time & 900mA large capacity battery】Helmet Bluetooth headset electronics Built in 900mA battery.Let you reduce the trouble of charging and have a pleasant trip.The headset supports 60 hours of continuous call and music playing time, and 500 hours of standby time. The charging time is 2 hours. The power of the headset can be displayed on the phone. | 【Effective Distance 20m & Stable Connection】One Helmet Bluetooth Headset wirelessly connected to two mobiles at the same time,Automatic connection and enjoy music,strong signal connection.Provide efficient and convenient communications in the riding.You can use the bluetooth helmet speakers when driving on the highway, without affecting listening to music and answering the phone. | 【Waterproof Technology & Outdoor safe use】Helmet Speakers No disturb Dustproof and IPX7 Waterproof by using Nano coating technology,Can protect the headset safely in Outdoors.No worry about the rain or snow even. | 【Perfect Sound Quality & Bass high Voice】By using windproof and more stable connection.DSP noise cancelling technology,Loud volume,this helmet headset transfers clear and high-quality stereo music sound.Compatible with all the smartphones with Can be used for Riding motorcycles, skiing, horseback riding,MP3,GPS are supportable independently. | 【Multiple usage scenarios & Easy to use】Helmet earphones can be safely used in many places, including motorcycle riding, skiing, cycling, rock climbing, outdoor travel, delivery, etc.

Fits all 67mm lenses | Ideal for protecting your valuable lens from scratches and dust | Enables macro photography using a standard lens | UV filter absorbs ultraviolet rays, Circular Polarizing filter eliminates reflections from non-metallic surfaces | Kit Includes 3 PC Filter Kit + 4 PC Close up set (+1 +2 +4 +10 filters) + Microfiber cleaning Cloth

The kit can be used to clean Demon Slayer, Marvel, DC, World of Warcraf, Yugioh, One Piece etc, all kinds of collections like games and comics’ statues, busts, GK, figures, models. | It contains three sizes of brushes which are made of soft bristles that would not damage the paint, an adjustable ball air blower and a storage bag. | Three different brushes can be used to clean different parts of the statuary collection. Fragile parts are recommended to be cleaned with the ball air blower. | It’s recommended to disassemble the statuary collection before deep cleaning, if the statuary collection with severe dust accumulation. | To flick and clean the brush head easily after use.

What is it - A PoE to USB C splitter to split the PoE+ signal (802.3at) into gigabit Ethernet and 5V/4A DC power, which could be adapted to USB-C or 5521 barrel port. | What is PoE - Deliver power and data with a single Ethernet cable for fewer wall plugs and messed cables. Extend powerline to where no AC outlets are nearby, up to 300 feet away from the power source. | Why PoE splitter - A cost-effective way to add plug-and-play PoE support to a 5V power-hungry device, such as the Jetson Nano with a barrel port or the Raspberry Pi 4 with a USB-C port. | What else needed - You need an IEEE 802.3at compliant PoE+ switch or injector to serve as the PSE (Power Source Equipment) and an Ethernet cable with PoE+ signal to feed the splitter. | Note - 1) This splitter does not support other voltages than 5V or QC/PD protocols. 2)This splitter needs PoE+ (802.3at) devices to unleash its full power. 3) Just put the split Ethernet aside if you don’t need the data. 4)The Split Ethernet cable does not carry power anymore.

【Durable Pole for GoPro】：This selfie stick for GoPro Hero 11/10/9/8/7/6/5 is customized with silicon rubber handle and textured waterproof aluminum alloy hand grip for hands-on comfort; equipped with wrist strip to prevent damage, provide enough insurance for your device. | 【Multifunction Selfie Stick Tripod】：AFAITH hand grip pole comes with phone clip and tripod mount, it can match with GoPro Hero 11/10/9/8/7/6/5/4/3/2,Osmo Action, Xiao Yi Action Camera , but also can be used with iPhone 14/13/12/11/X/8/7/7 Plus/6s Plus, Galaxy S9/S9 Plus/S8/S7 and more cell phones from 3.5 inch (8.9 cm) to 6 inch (15 cm). | 【Tripod Locking Method】：In case damage the tripods, please according the steps as following: rotating the tripod with counterclockwise will lock the stand and the selfie stick will be set, then you can start to selfie; roating the tripod with clockwise will unlock the stand and you can fold the tripod. | 【2-in-1 Designed Extendable Pole】：AFAITH selfie stick integrates pole and tripod as one, with adjustable telescoping pole and two foldable tripods, you can take photos and videos at different situations like selfie, group photos, party, travel, live, face-time etc. | 【Upgraded Aluminum Alloy Tripod Stand 】: We took your feedback and designed the most awesome selfie stick for GoPro out there! We upgraded some key features with AFAITH pole- upgrade plastic tripod to super strong (but light) aluminum tripod stand to make this selfie stick tripod very sturdy and durable, a thicker aluminum alloy selfie stick; Hold your GoPro or other action camera devices more stable.

Charge your smartphone, earbuds, and more using the accessible 7.5 W USB-C charging port. | Easily tilt your Echo Show 5 forward or backward to improve your viewing angle. | Quick and secure magnetic attachment. | Color matched with Echo Show 5 (3rd Gen). | Made with 44% recycled materials.

【 For NEWEST MACBOOK Air 15 INCH CASE 】- Only Design for New MacBook Air 15” Model with M2 Chip with Liquid Retina display & Touch ID & MagSafe Charging Port | 【Warning】- This case is NOT compatible with 2023-2022 MacBook Air 13.6 inch (Model: A2681 M2) & 2021-2018 MacBook Air 13 inch (Model: A2337 M1 / A2179 / A1932). Please kindly check the model number "Axxxx" on the back of the laptop before your purchase. | 【 CASE DIMENSIONS & WEIGHT】- The case included top part and bottom part protects your laptop from scrapes and scratches. Top part is 14.17 x 9.84 x 0.4 inch. Bottom part is 14.17 x 9.84 x 0.5 inch. The whole case only weights 13.4 OZ. You'll feel your laptop more natural in hand. | 【Easy Installation & Removal】 - For Macbook Air 15 inch with M2 Chip & Touch ID Case - Our protective case has micro clips that securely fastens to your laptop, and snaps off with easy when needed. | 【 SATISFACTION GUARANTEED 】- DONGKE offers Satisfaction Guaranteed or your money back. One year warranty on M2 MacBook Air 15 inch case and keyboard cover. Package includes 1 case + 1 keyboard cover + screen film + 1 sets of dust plugs.

【360° Adjustable Perfect Viewing Angle】: Full 360 degree swivel ball joint with A Larger Screen mount of your ipad Android Tablet for Google Maps and Navigation, you can hold your mobile phone or tablet vertically, horizontally or diagonally in the car. Install the mount to car CD player, a place at your fingertips,a safer postion at eye level,will not block your view. | 【Fits Almost All CD Slots】: Thickness of mount vane can be adjusted 0.1inch to 0.5 inch (2.5mm-12.7mm) to fit different thickness of CD slot. so the CD slot mount is suitable for most vehicles with standard CD players. Compatible with most car truck SUV pickups van front loading CD player, like Ford F150, Honda Accord, Toyota Highlander, Mazda, Jeep, Benz, Audi, SUV etc. You can use the CD even with the holder attached. | 【Stable Triangular Grip Structure】The holder has three side grips to hold, collapsible bottom and two adjustable arms with silicon pad, it holds tablet phone tightly. Screw-Locked base design, No interference with the CD Player playback so long as CD is loaded before hand. | 【Tablet & Smartphone Compatibility】 This Car CD Slot Tablet Mount fits all 4-13 inch Device, such as iPad Pro 12.9 11 10.5 10.2 9.7, iPad Air 4 3 2 1, iPad Mini 5 4 3 2 1, iPad 8 7 6 5 4 3 2 1, smartphones iPhone 13 Pro / iPhone 13 / 12 Pro Max / 11 Pro / 11 / X / Xs / XR / Xs Max / 8 / 8 Plus / 7 / 6, Samsung Galaxy S20 S10 + / S10 / S9 + / S9 / S8 + / S8 / S7 / S6 / A80 / A70 / A60 / A9 / A8 /J7 / J6/ Switch and more 4-13 inch cell phones or devices. | 【Full Protection】: 1. Car tablet mount won't scratch or damage your device due to the soft silicone padded surface. 2. And the foldable support footrest ensure hassle-free charging on the go. 3. Easy installation, no tools required. 4. Stable Triangular Grip Structure, fit different thickness of CD slot, make your tablet more stable and won't shake. | 【Warranty】: All our products comes with 45 days money back and 18 months warranty and we would reply your any questions in 18 hours.

[𝙃𝙪𝙢𝙖𝙣𝙞𝙯𝙚𝙙 𝘼𝙢𝙗𝙞𝙚𝙣𝙩 𝙇𝙞𝙜𝙝𝙩 𝙎𝙬𝙞𝙩𝙘𝙝 𝘿𝙚𝙨𝙞𝙜𝙣] Double press the red "B" button to turn off/on the colored lights directly. | [𝙐𝙥𝙜𝙧𝙖𝙙𝙚𝙙 𝘽𝙡𝙪𝙚𝙩𝙤𝙤𝙩𝙝 𝟱.𝟯 𝙏𝙚𝙘𝙝𝙣𝙤𝙡𝙤𝙜𝙮] The latest Bluetooth 5.3 technology, optimizing the transmission delay and connection defect problems, Bluetooth 5.3 will bring you a faster, more stable and smarter connection with less sound quality loss, uninterrupted calls, and music experience. It takes only 1 second to complete pairing, and no need to repeat pairing after the first successful pairing with your device. | [𝙄𝙣𝙩𝙚𝙡𝙡𝙞𝙜𝙚𝙣𝙩 𝘿𝙪𝙖𝙡 𝙐𝙎𝘽 𝙋𝙤𝙧𝙩𝙨 & 𝙁𝙖𝙨𝙩 𝘾𝙝𝙖𝙧𝙜𝙞𝙣𝙜] Coming with 2 USB ports(PD 36W and USB-A 12W), can charge two devices simultaneously. Built-in over-current protection, over-voltage protection, intelligent temperature control, and short circuit protection, it will effectively ensure safe charging. | [𝙂𝙧𝙚𝙖𝙩 𝘾𝙡𝙚𝙖𝙧 𝙈𝙪𝙨𝙞𝙘 𝙎𝙩𝙧𝙚𝙖𝙢𝙞𝙣𝙜] Bluetooth 5.3 provides a stable connection, while Noise Suppression (CVC) technology and echo-cancellation grants an amazing hands-free calling experience. In addition, this Bluetooth car adapter supports Bluetooth connection and USB stick connection (≤64GB). | [𝙃𝙞-𝙁𝙞 𝘿𝙚𝙚𝙥 𝘽𝙖𝙨𝙨 & 𝘽𝙖𝙘𝙠𝙡𝙞𝙩] Just press the button "B" and you will enjoy powerful deep bass and immersive stereo sound. The high-fidelity Hi-Fi sound quality will also make the music more dynamic and pleasing to the ear, taking your passion for music to a new level. | 【𝙀𝙭𝙘𝙡𝙪𝙨𝙞𝙫𝙚 𝙇𝙞𝙛𝙚𝙩𝙞𝙢𝙚 𝙒𝙖𝙧𝙧𝙖𝙣𝙩𝙮 𝙎𝙚𝙧𝙫𝙞𝙘𝙚】If our cigarette lighter charger arrives doesn’t fit your car or doesn’t work, feel free to contact us to find a satisfying solution. We provide 36 Months warranty and lifetime support.

The Perfect Dust Covers LLC, is a company that specializes in making very high quality covers for any type of printers, air conditioning unit systems, televisions, gas grills and much more. We guarantee our products 100% | The Perfect Dust Cover, do not discolor, it is made of a very high quality waterproof nylon material | The Perfect Dust Cover, is Double Stitched, Anti Static, STRONG and Heavy Duty cover | The Perfect Dust Cover, is the perfect product to protect your printer against dust, spills, scratches, water and other contaminants. | The Perfect Dust Cover, Black Nylon Cover Compatible with Brother MFC-L2700DW, Brother MFC-L2720, Brother MFC-L2740 and Brother MFC-L2750 Monochrome Compact Laser All-in-One Printer, Anti Static, Double Stitched and Waterproof Dust Cover Dimensions 16.2''W x 15.7''D x 12.7''H by The Perfect Dust Cover LLC

The Perfect Dust Covers LLC, is a company that specializes in making very high quality covers for any type of printers, air conditioning unit systems, televisions, gas grills and much more. We guarantee our products 100% | The Perfect Dust Cover, do not discolor, it is made of a very high quality waterproof vinyl material | The Perfect Dust Cover, is Double Stitched, Anti Static, STRONG and Heavy Duty Cover | The Perfect Cover, is the perfect product to protect your printer against dust, spills, scratches, water and other contaminants. | The Perfect Dust Cover, White Vinyl Cover Compatible with HP LaserJet Pro M283fdw, HP LaserJet Pro M283cdw, HP LaserJet Pro M281cdw and HP LaserJet Pro M281fdw Wireless Color Printer, Anti Static and Waterproof Cover, Dimensions 16.5''W x 16.6''D x 13.2''H by The Perfect Dust Cover LLC

The Perfect Dust Covers LLC, is a company that specializes in making very high quality covers for any type of printers, air conditioning unit systems, televisions, gas grills and much more. We guarantee our products 100% | The Perfect Dust Cover, do not discolor, it is made of a very high quality waterproof nylon material | The Perfect Dust Cover, is Double Stitched, Anti Static, STRONG and Heavy Duty cover | The Perfect Dust Cover, is the perfect product to protect your printer against dust, spills, scratches, water and other contaminants. | The Perfect Dust Cover, Black Nylon Cover Compatible with Brother MFC-L2710DW and Brother DCP-L2550DW Monochrome Compact Laser All-in-One Printers, Anti Static and Waterproof Dust Cover Dimensions 16.2''W x 15.7''D x 12.5''H by The Perfect Dust Cover LLC

【Compact & Lightweight】 The magic arm (9.8 inches/25cm length) with super clamp is lightweight and convenient to carry in a pocket, perfect for indoor and outdoor events. The maximum load capacity of the magic arm is 4.4lbs/2kg | 【Stable & Solid】An Articulating Friction Magic Arm with 1/4” screws on both ends and a super clamp with 1/4" and 3/8" threads included. Made of aluminum alloy and stainless steel, they are solid with higher durability, anti-corrosion, and abrasion-resistant | 【Rubber Cushion Design】 The magic arm is designed with an anti slip rubber cushion on the bottom of both ends to prevent the scratches of the monitor or light and help to lock the equipment tighter | 【Adjustable Shooting Angle】Two 360 degree ball heads of the magic arm can adjust to any angle based on your needs, providing a wide range of shooting horizons. One knob for locking all position | 【Wide Compatibility】: Standard 1/4 inch screw on both ends of the magic arm is compatible with Flash, LED video Light, Microphone, LCD Monitor, Super Clamp, and other accessories with 1/4 inch screw hole, such as fixing frame, 15mm rod, phone/camera cage, etc. Super clamp comes with 1/4" and 3/8" threads. It can be mounted virtually anywhere, such as cameras, lights, umbrellas, hooks, crossbars, even other Super Clamps. It can open a maximum of 52mm and a minimum of 15mm

Latest Model : Applying high-quality USB3.0 data cable, this portable hard drive enables you to backup massive data in seconds, delivering ultra fast transfer speed to improve your PC performance | Ultra-fast Data Transfers : USB 3.0 Super speed 10Gbps transfer rate ultra slim and light weight Portable external hard drive.Runs straight from a usb 3.0 or usb 2.0 port no external power source needed | System Compatible : Compatible with Windows, Mac, Linux, Android, Chromebook, and TV, PC, Laptop, PS4, Xbox series consoles and so on | Plug and Play : This external drive is ready to use without external power supply or software installation needed. Ideal extra storage for your computer and game console | Package and Warranty : 1 x Portable Hard Drive, 1 x USB 3.0 Cable, Gift-type shell packaging, 1 Year Manufacturer's Warranty

Garmin 010-10806-30, 010-11828-03, 361-00029-02 Replacement Battery For Garmin Alpha 100, Alpha GPS Pig Hunting Dog Tracking System, DC50 Dog Tracking Collar, GAA002, GAA003, GAA004, T5 GPS Dog Tracking Collar, T5 GPS Pig Hunting Dog Tracking Collar, T5 GPS Standard Dog Tracking Collar, TT 10 dog tracking, TT 10 training device, TT10 Dog Device, TT10 GPS Dog Tracking Collar; | Capacity: 2600mAh / 9.62Wh; | Type: Li-ion; | Volts: 3.7V | Size : 67.59 x 18.54 x 18.54mm;

The 2 pin connector is a push-pull self-locking connector. It will automatically lock when inserted into the camera. It is impossible to pop off. You should pinch the top of the 2 pin connector, which will easily pull it out, rather than pull out by pinching directly the cable or the bottom of the connector. | Power Cable for Blackmagic pocket cinema camera 4k | Male DC barrel fits both 5.5 x 2.5mm and 5.5 x 2.1mm female DC ports | Cable Length: 3 foot (90cm),22 AWG | Plug A: 2 pin Female. Plug B: DC male

🏆【Precise Cutouts, Fits Snugly】Soonjet's exclusive module is molded according to original Macbook using micro 3D cutting tech. Compatible with macbook air 15 inch case fits snugly like a second skin, effectively preventing dust and dirt from entering and scratching your laptop. It allows easy access to all ports and ensures smooth opening and closing. | 🥇【Apple-sourced Material, Sturdy & Durable】To solve the common problem of easily broken and unreliable thick plastic cases on the market, we've upgraded our materials to explosion-proof composite PC. It increases hardness by 200%, making the shell scratch-resistant, durable, and crack-free for up to 10 years. | 🛡️【All-round Protection, Upgraded Shockproof Design】Our exclusive「4-corner」full coverage provides 360° comprehensive protection.「3-layer」structure easily absorbs 99.99% of impact force, ensuring 0 damage from falls. With 5500 times 10FT (2.44m) drop test passed, compatible with 15 inch macbook air case is the only one in the industry with SGS military-grade certification (MIL-STD-810H) . | 💎【Invisible Armor, Top-tier Texture】With high-precision micro-etching matte finish, compatible with macbook air 15 inch case perfectly matches your MacBook, making itself almost invisible and retaining the original sleek and minimalist design. Plus, the oil-repellent nano-coating can effectively reduce fingerprints, smudges, and scratches, making it longlasting new and clean. | 🤗【10s Snap On, Detail Protection】Our mini buckle design enables quick and easy installation. The soft protective coating allows for easy insertion and removal without damage. Don't let cheap cases scratch your laptop! | 🙋【10-Year Guarantee, Dare to Promise】Backed by 39 international authority certifications, compatible with clear macbook air 15 inch case is one of the most reliable and high-quality options on the market. We promise: wrong model, damaged product, not as described, etc., No Need to return, just Replace! | *Note: Only compatible with MacBook Air 15 inch 2023 New Release (Model A2941).

🌱【Powerful CPU】 The Seeeduino XIAO is equipped with an ARM Cortex-M0+ 32bit 48MHz microcontroller, which is three times faster than Arduino Uno and Arduino Nano. Furthermore, this Arduino IDE compatible board XIAO has 256KB flash memory and 32KB SRAM. | 🌱【Rich Interfaces in a Tiny Size】 The device has 14 GPIO pins, each of which has 11 analog channels, 11 digital channels, I2C*1, UART*1, and SPI*1, USB Type-C interface*1 in a tiny space, just 20mm*17.5mm (about the size of your thumb). Seeeduino XIAO is the smallest Arduino compatible board in the Seeeduino series. | 🌱【Fully compatible with Arduino IDE】 Seeeduino XIAO development board is perfectly compatible with Arduino IDE and you can easily create small projects using the extensive and comprehensive Arduino library. It has a 2.54mm pin pitch and can be used even when inserted into a breadboard because it is an Arduino microcontroller.It has a 2.54mm pin pitch and can be used even when inserted into a breadboard because it is an Arduino microcontroller. | 🌱【Applications】 Seeeduino XIAO is suitable for Wearable devices, Rapid prototyping, DIY keyboard, USB to multi-channel TTL/USB host mode, etc. | 🌱【Perfect for Wearable and Tiny Arduino Projects】 This microcontroller has good performance in processing but needs less power. As a matter of fact, it is designed in a tiny size and can be used for Arduino wearable devices and small projects.

SMARTER CAMERA PLACEMENT - The Wasserstein Wyze Cam V3 camera case allows you to completely blend your camera in with its surroundings | MORE PROTECTION - This camera case has a built-in compartment that easily fits your Wyze Cam V3 - fully encasing your camera for better protection | MAINTAINS QUALITY - Hide your Wyze Cam V3 without sacrificing the video or audio quality of your camera | INFRARED CLOCK - Turn off the infrared feature in the Wyze app and use the clock's built-in infrared for clear recording, even in low light conditions | COMPATIBLE WITH WYZE - The Wasserstein Alarm Clock Camera Case is fully compatible with the Wyze Cam V3

【Metal Arm】-The rod part of this strong metal suction cup is all made of metal, which is stronger and more durable than ordinary suction cups and less likely to be worn out. | 【4 Ball Joints Structure】-There is a ball joint at each end of the arm, doubling the flexibility. When installing a action camera for shooting, it is easier to adjust the direction. | 【Super Stable】-The combination of vacuum adsorption principle and non-marking adhesive makes this powerful metal suction cup has powerful suction. Therefore, you do not need to worry about dropping the camera because there is not enough suction. | 【No Glue Marks】-When removing, it is recommended to first drench the bottom of the suction cup with warm water, then open the latch, and finally pull the small tail, the suction cup mount can be removed. | 【Compatible with Most Action Cameras】-Complimentary adapter base and phone clamp, so that this gopro suction cup for car can be used not only for a variety of action cameras, but also for phones.

[FUNCTION]: Full color filters provide a complete color transition for a smooth blending effect. Give your landscape and skin texture a more colorful touch. It’s perfect for changing the mood of a picture | [WIDE COMPATIBILITY]: Fits camera lens with a 37mm filter thread. Such as: For Olympus M.ZUIKO DIGITAL 45mm f/1.8 lens; For Olympus M.ZUIKO DIGITAL ED 14-42mm f/3.5-5.6 EZ lens; For Panasonic LUMIX G 42.5mm f/1.7 ASPH POWER OIS lens; etc. | [DOUBLE THREADED] The 6 color filters are double threaded allowing additional filters to be screwed one over the other. | [THREE CLEANING HELPERS] Camera lenses cleaning pen, Microfiber Lens Cleaning Cloth and Camera lens cleaning paper tissues better help you keep lens/filter no dust, no stain, no watermark or finger mark | [Package included] 1 x full color filter set (red+ orange + yellow + green + blue + purple); 1 x Lens Cleaning Cloth;1 x Lens Cleaning Tissue;1 x Lens Cleaning Pen;1 x 6 Pockets Filter Pouch

SIDETRAK COMPATIBLE: SideTrak cord is compatible with the all SideTrak portable monitors and most Windows, Mac, and Chromebook laptops. SideTrak Monitor is a full HD USB monitor that magnetically clips to the back of your laptop to create a portable dual-screen workspace! | USB-C & USB-A: The SideTrak cord has a USB-C to USB-C cord and comes equipped with a USB-A adapter. | STRONG CONNECTION: Power your SideTrak with just one cord! This cord communicates both data and power between your portable monitor and laptop for a seamless experience. | DURABLE: The SideTrak braided nylon cable is durable, flexible, and tangle-free. | CORD MANAGEMENT: Keep your cord wrapped up and organized with the Velcro cord wrap.

3 in 1 Game controller& white backlit keyboard mouse combo:one button to switch between keyboard mode and game controller mode. | Game controller mode:2.4GHz wireless game controller comes with D-pad, ABXY button,L1,R1,L2,R2,Turbo and vibration function,Please know that this keyboard have three mode ,which for PC/PS3,360,android,you need to press the home button about three seconds to change the three modes | Plug and play:2.4GHz wireless connection via USB receiver,and the long control rang is up to 10 meters.the signal interference:when working with android TV box or smart TV,big monitor device may have some signal interference,Signal interference may result in short distance and buttons do not work as well.In this case you can try to move the receiver from back of your device to the front USB port then use this keyboard | Backlit:backlight guides your operation,white color backlight,easy and convenient to use the keyboard in the dark. | Auto sleep mode:this keyboard has auto sleep /wake up function,when there is no any operation in 5 minutes,it will into sleep