Despite the introduction of more advanced audio and video signal cables such as HDMI and TOSLINK | This is a premium two-channel audio cable made of RG-59 75 ohm coaxial cable | The cable uses a 22AWG conductor and is shielded to prevent EMI or RFI interference from entering

Although they were originally designed to use the DB-25 connector RS-232 ports and cables commonly use the DE-9 (aka DB-9) connector | This cable features a DE-9 (DB-9) male plug on each end | The cable is wired straight through with 28 AWG wires | Each pin is connected to the corresponding pin number on the other end | The connector heads are molded onto the cable and are equipped with a pair of thumbscrews for securing the plug to the female socket

HIGH QUALITY MODEM CABLE: Typically used to transfer data from one PC directly to another PC. This male to female serial cable is solidly constructed, UL rated and RoHS Compliant. | HIGH QUALITY COMPONENTS: High quality serial cable features PVC hood and foil-shields while the contacts are gold-plated for maximum connectivity and signal transfer. The pins on these cables are gold-plated to avoid erosion and provided a reliable signal between devices. The 4-40 thumb screws ensure a secure connection that will not easily loosen. | COMPATIBLE DESIGN: We carry an assortment of serial DB9 cables and gender connectors for connecting your computer to peripheral devices. Peripheral devices include everyday computer equipment including modem, printers, networks, and more. | AVALABLE IN MULTIPLE LENGTHS: Choose the length that fits your cable requirement. Neither too long to wrap extra wire in a coil, nor too short that fails to reach your connection point. Select the right length to avoid extra cluttering. | LIFETIME WARRANTY: We are proud to offer lifetime warranty on our cables, adaptors and on most of our products.

Cut Down UV Rays | Screw On | Optical Glass

Brand New. This is not original, but the same function as Original remote control | No program needed. Just install new battery CR2032 (not included) to work. | If the remote isn’t working, try the following steps to fix your remote: 1. Please unplug the Bose from AC power, press and hold its power button for five seconds, then plug it back in and turn it on. 2. Remove the batteries from the remote. Press every button on the remote at least one (1) time to drain any residual power. This also helps to check for stuck buttons. Re-insert the batteries back into the remote. | Please note: this remote is not compatible with AWRC-1G/AWRC-1P/CD-3000/AWR1-1W/AWR113/Bose Acoustic Wave Music System II/Bose Acoustic Wave Music System I/Bose Wave System with Multi-CD changer | Bose remote control look similar, but they are not compatible with each other. Please double check your original remote before purchasing it.

1 Foot 400w Braided Speaker Tinsel Lead Wire .036" Dia.

12' | White | Coiled Modular Handset Cord | With Attached Plug Ends

12 Inch Ribbon Cable | Includes Mounts Posts Screws

All in one Design, combines a cleaning solution, microfiber wipe and smartphone Stand into one slim and portable item. | Helps clean your device with precision and without damaging sensitive components. | Microfiber wipe side is soft and leaves screen surfaces streak free | Phone stand is made out of resistant plastic that will hold up your device in a comfortable viewing angle for extended watching sessions | Cleaning Agent and Microfiber wipe can clean any device from Smartphones and Tablets to TVs and Laptops

This VMC-IL4615 i.LINK Digital Video Transfer Cable provides an In/Out (IEEE-1394) high-speed, bi-directional digital link between your Sony Handycam camcorder and a computer, another camcorder, editing deck, or other device that has i.Link capability. It allows you to transfer data digitally and edit it multiple times with virtually no deterioration of picture of sound quality. | Connection/Interface Type: i.LINK 4-pin to 6-pin Firewire (IEEE-1394). | This VMC- IL4615 i.LINK is compatible with (but not limited to) the Sony Handycam Models Listed in the Description Above.. | Cable is 4 ft (1.2 Meters) in Length. | 3 Year Replacement Warranty. MPF Products is a Registered Trademark.

Durable ABS plastic Housings | Molded-In Spring Loaded Red and Black Connections For Easy Polarity Identification | 2 Inch Mounting Hole Size, Depth1-1/4 Inch, Mounting Screw Spacing 1-3/4 Inch | .205 Speaker Wire Connections | Use for Speaker cabinet, Home speakers, Car speakers

Anti-falling off design: Anti-falling off limit screw design, reduce the risk of falling photography equipment | Aluminum material, one-piece body design, precision machining, making it and wear-. | The camera cold is and , with strong compatibility of applicable equipment and strong versatility of 1/4 screw | The cold hot shoe mount comes with a 1/4inch mounting hole. You can mount it onto any 1/4-threaded hole,such as Cinema Camera, Pocket cinema camera,DSLR /cage | Easy to Install

Plugs into Car Harness at radio | Power - 4 Speakers | Made from quality materials | Easy installation

4-PACK RP SMA to SMA coax adapters kit 👉 ①【SMA to SMA coax adapter】: SMA male to SMA female right angle connector, ②【2 x RP SMA to SMA coax adapter】: RP-SMA (reverse polarity SMA) male to SMA female right angle connector ➕ RP-SMA (reverse polarity SMA) female to SMA male right angle connector, ③【RP SMA to RP SMA coax adapter】: RP-SMA (reverse polarity SMA) male to RP-SMA (reverse polarity SMA) female right angle connector. | Connector Material: Copper with Great connectivity (Not Alloy), Surface treatment: Gold-plated, Impedance: 50 ohm, Low-loss | Help you connect SMA to RP SMA devices, SMA to SMA devices and RP SMA to RP SMA devices. | Application for Antennas, Wireless LAN Devices , RF Coaxial Connector, RF Coaxial cable, Wi-Fi, Radios, External Antenna, Broadcast, Telecom, CCTV, LMR, Microwave Applications, Digital Communication System and so on, >1000 Times Mating Life Time. | Package included : 1x SMA male to SMA female right angle connector + 1x RP SMA male to SMA female right angle connector + 1x SMA male to RP SMA female right angle connector + 1x RP SMA male to RP SMA Female right angle connector

VGA to VGA cable connects PC or laptop to projector, LCD monitor and other display with 15 pin port | This black computer monitor cable is with Al-foil shielded layer to protect against EMI and RFI interference | Nickel plated connectors (male to male) and copper conductors enhance video performance | This heavy duty SVGA cord is well built for high quality video signal transmissioThis heavy duty SVGA monitor cord is well built for high quality video signal transmission | 3 Feet (1 Meter) computer wire with screws in to ensure a steady connection

Transmission mode (suitable for sending computer/TV/radio/MP3 audio to Bluetooth headset/stereo) | Receiving mode (suitable for ordinary audio/car/wired headset, etc.) | The audio cable is inserted into TRANSMITTER for transmission mode, and the indicator light is blue | The audio cable is plugged into RECEIVE for receiving mode, and the indicator light is red | Plug in the computer for launch mode, no need to plug in the audio cable, just plug in the USB

Replace a LED board for your broken or worn out IR LED board | Great performance without much energy consume | This is a IR LED board for CCTV security cameras | Built-in protection circuit against damaging the board by high voltag | Power supply exceeds DC13V may greatly reduce the operating life

Type: Solid State Disk Mounting Screw Kit | Model: Universal hard disk drive screw and washer | Color: Black, Screw Length: 10mm | Function: To fix hard drives, Provide Excellent Shock Absorption. | Applications: Suitable for 2.5" SSD (solid state drives), HDD(hard disk drive)

Specially design for Leica M11 Camera | The raw materials made tempered glass are from Janpan;Shield camera screen from Dirt, Scratches, Fingerprint smudges, Reduce UV rays | Film is cut according to real camera, will fit the screen perfectly and provide your camera screen with a perfect protection! | Ultrathin film only has a thick of 0.25mm, possess characters of High transparency, Ultra-low reflection, Hardness up to 9H | Automatic adsorption installation-much easier and convenient to film the screen in a short time

Converts standard, straight wired cables to null modem wiring | Null modem configuration with pin 9 open. | Slimline design reduces leverage strain on computer ports | UL grade 94V-0 connector insulator satisfies flammability requirements | Screws are removable and reversible

Metal lens shade for standard 43mm filter thread lenses, will screw into your Lens, or filter. | Solid metal construction, with flat black interior to prevent Reflections. | Ensures no problems with igniting or motor functions. | The 43mm screw-in lens hood fits lens with 43mm filter diameter only. Please verify your Lens thread size/ filter diameter before ordering | Lens thread size will be Marked somewhere on the Lens barrel or printed underneath your Lens cap. This number is always preceded by a "Ø" (Diameter) symbol. For example: ø43 = 43mm lens thread size.

Mft rear Lens cover/ micro Four Thirds body cap are designed for Olympus Panasonic M4/3 camera/lens | M43 camera body cap/ Lumix M43 body cap can protect the image sensor and internal camera components from dust, moisture, and other elements. | Micro Four Thirds rear Lens cap can protect your valuable lenses against scratches, moisture, dust and fingerprints when it is not attached to the camera. | Replace Olympus bc-2 body cap, Olympus lr-2 rear Lens cap. | MFT Body Cover MFT Lens Cover is compatible with: Panasonic G1 G2 G3 G5 G7 G9 GH1 GH2 GH3 GH4 GH5 GH5s GF1 GF2 GF3 GF5 GF6 GF7 GF8 GM1 GM5 GX1 GX2 GX7 GX8 GX9 GX85 GX80 G850; Olympus E-P1 E-P2 E-P3 E-P5 E-PL1 E-PL2 E-PL3 E-PL5 E-PL6 E-PL7 E-PL8 OM-D E-M1 E-M5 E-M5 Mark II E-M10 E-M10 Mark II E-PM2 E-PM1 PEN-F Cameras and M43 Mount Lenses

Replace Dell P/N: 8FKXC 08FKXC | Fit Models : Dell PowerEdge R630 R730 R730XD T630 R430 T430 PowerVault MD1420 MD3420 series | 100% Brand New and High Quality, shipped from US | Ensure it is compatible with your model and check pictures for more details.

★ These RJ11 telephone cables for landline phone and fax is 1 ft long | ★ Both ends are durable RJ11 6P4C male connectors, 3 prong design, gold plated pins | ★ 4 wires flat phone cable and standardly reverse wired for voice use | ★ Connects landline phones, modems, fax or answering machines | ★ Universally compatible with all brands of landline phones that equipped with RJ11 phone jack

Ultra Wide SCSI 40 Mbps Hard Drive Ribbon Cable

✎World Wide Input✎ :Voltage 100-240VAC 50/60Hz | ✎Safety Protection✎: No noise, low temperature operation, no spontaneous combustion, no explosion, no fire hazard, stable output. Automatic overload cut-off, over voltage cut-off, automatic thermal cut-off, short circuit protection. | ✎Voltage Consistency ✎: No voltage fluctuations at power on, during transmit, receive, or at power off. It will protect your electronic products from destruction. | ✎2-Year Warranty ✎: We will provide 2 year manufacturer warranty and 30 days return - we've got your back! | BestCH Global 12V AC / DC Adapter For Uniden Bearcat Radio Scanner BC220XLT, BC230XLT, SPORTCAT, SC150, SC150B, SC150Y, SC180, SC180B, SC200 Scanner Receiver Power Supply

【Packing List】You will receive 12 sets of switching power supply fixing brackets, including 12 brackets and 12 bolts. | 【Specification】The size of the bracket is 0.59inch long, 0.63inch wide and 0.78inch high. The length of the bolt is 0.34inch. | 【Function】Help you fix the power supply installation in the suitable position. | 【Universal Design】Suitable for all 200W-400W LRS ultra-thin series, NES series, SP series and S series switching power supplies. Such as NES-350, NES-200, LRS-350, LRS-200, RSP-150, RSP-200, RSP-320, S-201, S-320, S-350 and so on. | 【Other Uses】In addition to fixed the switching power supply, if the mounting holes are the right size, you can also use them to fix other items.

★ 2pcs Telephone 2-line splitter (Line 1, Line 2 and Line 1 + Line 2) | ★ RJ11 6P4C interface 1 in (6P4C) and 3 out ( 6P2C, 6P2C + 6P4C) | ★ Splits a two line phone jack where 2 phone numbers exist (e.g. one for landline phone and another for fax machine) into dual separate jacks (L1, L2) and combines in the third jack (L1+L2) | ★ 1pc Telephone in-line coupler RJ11 6P4C female to female is designed for phone cord extension | ★ For use with all standard RJ11 devices such as landline phones, modem, fax or answering machines etc.

Easy for any average replace it by yourself, just read our refoaming manual before replacement. | The repair edge is pliable, anti-aging and durable. | INSIDE DIAMETER: 110MM, CONVEX INSIDE DIAMETER: 121MM, CONVEX OUTSIDE DIAMETER: 143MM , OUTSIDE DIAMETER: 157MM | You need: Replace a damaged one, remove the old rubber and clean the residual glue before install the new rubber edge. | Very good replacement for your old speakers or DIY production. | Package Includes:2PCS

[Fully Compatible] Compatible with Cobra laser radar detector RAD 350 / 380 / 450 / 480i / 700i / XRS9370 / XRS955 / XRS5300 / XRS7700 etc | [Power Specifications] INPUT: 100-240 V 50-60 HZ OUTPUT: 12 V CABLE LENGTH: 9.84 FT. !! Very long enough for use in a car | [Built to Last] Power cord with stable quality copper core, low resistivity, high strength and tensile resistance, cord shell was made of PVC material, strong and durable, charging your radar detector | [Perfect Replacement] If your original charger power cord is lost or damaged, it will be a perfect replacement charging cord | [Better Service] We provide 30-day product refund period, 12-month replacement service, if you have any questions about the charger cable, please find our help us and we will respond to your questions as soon as possible

The polarizing film sheet is suitable for light scattering, polarized light projects/experiments, as well as repair or upgrade dashboard displays, electric motorcycle dashboard displays, small LCD screens, projector screens, cell phones, electronic watches and other LCD display devices. | Material: Composite; Thickness: 0.25mm; Dimension: 100mmx155mm | The material is about 1mm with protective backing sheets on both sides. Simple and convenient to use, clean the dust and adjust the angle. Then cut it into the desired shape and stick it on. | Polarizing material is on one side of a plastic substrate that scrambles polarization. You need to choose which direction the light passes through depending on your use. a) light through polarizing side first, to analyze polarization from an object; b) light through substrate first, to create polarized light to illuminate an object. | Remember to take off the protective film from both sides before using it.

2.1mm Focal Length - This camera lens features a 2.1mm focal length to make every detail so clear that no message will be missed, thus preventing danger. | 150° Wide Angle - This IP camera lens supports 150° wide angle, which gives you a full vision. Makes whole situation under control. | 2.5mm F-number High Definition - This IP camera lens adopts high F-number up to 2.5mm to give you a super clear vision. | Precise Compatibility - The M12*0.5 lens is widely suitable for both 1/3'' & 1/4'' CCD chips with no stuck or conflict. | IR Lens - This CCTV lens supports night vision which gives you a 24-hour protection. So reliable.

Specification: Color: Black; Material: Aluminum Alloy; Suitable for: all 67mm lenses and 77mm filters; Overall Size: 79x6mm/3.11x0.24inch(Dia.H); Male Thread: 67mm/2.64inch; Female Thread: 77mm/3.03inch; Package List: 1 x Filter Adapter Step Up Ring | Advantage: The adapter ring is made of aluminum alloy and coated with matte black electroplated coating, which can resist corrosion and other wear elements often encountered in outdoor photography. | Instruction: From left to right, the first number is the size of the male thread, and the second number is the size of the female thread. | Application: The camera lens adapter ring can be installed in front of the lens, allowing you to use filters and accessories different from the size of the camera lens. The adapter ring can change-over lenses of various sizes, so that you can share the same filter, shutter, additional lens, etc. | Note: Please check the thread size of the lens adapter ring is suitable for your requirements before placing an order.

Color: Dark Red, Orange; Material: Pure Copper; Thread Size: M3*0.5 Tapered Thread; Total Size: 11 x 5.5mm / 0.43 x 0.22 inch(D*H); Packing List: 2 x Shutter Buttons, 2 x Rubber O Rings | Advantage: The soft shutter button, and concave surface design, allow you to take pictures comfortably. The camera shutter button is equipped with a rubber ring for cushioning and stability, effectively preventing the button from falling off and the camera shake. The shutter release button, high-end paint coloring, and CNC cutting process, adorn your camera, giving your camera a stylish and classy look. | Instruction: Screw this button clockwise into the thread of the camera shutter, and tighten it properly with a little pressure to prevent it from falling off, and you can enjoy a comfortable and stable operation experience. | Application: The shutter release button is suitable for almost all cameras that have M3*0.5 Tapered Thread, it is a useful camera replacement accessory, that helps you take beautiful photos in real-time and record beautiful moments. | Note: Please check whether your camera shutter has a tapered thread before purchasing.

Converts standard, straight wired cables to null modem wiring | Gold contact plating provides reliable connections with repeated mating cycles | Slimline design reduces leverage strain on computer ports | UL grade 94V-0 connector insulator satisfies flammability requirements | Screws are removable and reversible

●[Connector]: Internal computer power adapter, used to supply power from the 8-pin ATX on the motherboard. The 24-pin ATX connector is converted to the required 8-pin ATX connector. | ●[Solution]: Power Cable can convert the regular 24-pin power supply into 8-pin power supply interface for Dell dedicated. | ●[Converter]: The converter line comes with a 12VSB booster panel, which boosts the +5VSB of the conventional power supply to the +12VSB required. | ●[Compatibility]: Compatible with 3020, 7020, 9020, H61, H81, Q77, Q87, B75, A75, Q75, Q65. | ●[About cable]: Adopt 18AWG standard wire, 0.18x34 copper core, support 1000W power supply.

0.01" Ultra-thin Tempered Optical Glass LCD Protector. | Hardness of its surface is up to 9H; High transmittance up to 95% to show the clear image of the LCD screen. | Multiple layers of protective material shield your display from dirt, scratches, sweat, smears and light impact | The surface of the protector is also against water, oil and fingerprints. | Glass Screen Protector fits Fujifilm X-T4, X100V Cameras

SOFT AND SMOOTH SILICONE - Made of eco-friendly and soft silicone material, this apple pencil 2nd generation case provides excellent skin touching and a comfortable grip for all types of use, including drawing, sketching, and everyday use. | PERFECTLY DESIGNED FOR iPad Pencil 2nd Gen - This slim and stylish case is specially designed to fit perfectly to your 2nd Generation Apple Pencil. The anti-roll design on the surface of the pen holder gives you a more stable grip and prevents it from sliding or getting scratched. Protect against dust and dirt. | MAGNET-FRIENDLY - The ultra-thin design does not affect the wireless charging connection to the New iPad Pro 2020, New iPad Pro 2021 and double tap function, allowing you to charge your pencil without having to remove the sleeve.(NOTE: It will AFFECT THE CHARGING if the iPad with the CASE ON.) | FULL PROTECTION - This case also includes a replacement tip cap to protect the apple pencil grip nib from scratches or accidental damage when not in use, while also allowing you to personalize your pencil with a unique look. | EFFORTLESSLY INSTALL AND REMOVE - The apple pencil can be easily slid into and pulled from the case with your fingers slowly. Convenient and hassle-free. (If you are not satisfied with the product, our customer service team is always ready to help within 24 hours.)

3.5 inch SATA HDD Drive to IDE 40Pin mainboard converter Board | Works with all 2.5/3.5" SATA Drives. | Supports IDE 66/100/133MB/s | With Master and slave jumper. | No driver needed, plug and play, unit is not hot swappable.