1.The bulb provides 200 watts of power and an average life of 2000 -3000 hours. | 2.Our high quality replacement lamps last much longer than the imitations and provide a brighter, cleaner light source. | 3.Easy for installation, no technician needed, It's an easy process that can be completed in just a few minutes! | 4.Included with every projector lamp we sell is our trusted 180-Day Guarantee. If you order a projector lamp from our company and you are not satisfied for any reason, you may send the projector lamp back for a full refund or an exchange. | 5.Compatible Models：Fit for BL-FU195A /BL-FU195B /BL-FU195C /BL-FU190E /SP.8VC01GC01 /RLC-100 /5J.J9R05.001 HD142X HD27 EH345 H183X TW342 S341 S340 W331 DH1011 EH300 HD131X HD2500 HD30B HD25e HD131Xe HD131XW EC300ST BR28HD PJD7828HDL PJD7720HD PJD7831HDL MX570 MX525 MS521P MS524 MX528 MX505 MS506 MS504 MX507 MX522P BS3030 MS3081+ MS504A MS504P MS506P MS507 MS512H MS514H MS517H MS522P MS524B MS527 MS527P MX3082 MX3082+ MX505A MX507P MX525B MX528P TS521P TS537 TX538 Projectors

87W Fast Charging: Input: AC 100-240V-1.5A 50-60HZ, Output:USD PD 20.4V/4.3A, 20V/2.25A, 18V/3A, 15V/3A, 12V/3A, 9V/3A, 5V/2.4A depending on the voltage, it can be used for usb-c charger for laptop. usb charger comes with an usb-c to usb-c cable. Stable fast charging, intelligently recognizes your device and provides customized and accurate charging current. | Universal Compatibility: Fit for Mac book pro 13/14/15 inch(2016-2023), Mac book 12 inch(2015, 2016, 2017), Air(2018, 2019, 2020, 2022), you can use this charger instead of 67W/61W/30W/29W adapter for lower wattage. These 87W USB C power adapters also suits for other Type-C phones and new ipad pro, widely used for Type-C supported laptop. | Secure and Quick: As for 87W USB C chargers manufactured with the high quality materials, the smart circuit components of power supply offers fast and efficient charging and providing overcharge protection system/shortcircuit/overload protection/over-heat protection. | Fast Charging with PD 3.0: There is a 6.6ft 5A USB C cable included, these 87w USB C chargers uses high-quality hardware which can guarantee the output of enough power in a variety of modes. The lifespan lasts more than 30,000 hours. | After Sell Service: We have always been committed to provide products of superior quality at unbeatable prices and believe that our products will bring you a pleasant experience. If for any reason you are not 100% satisfied with our 87W power adapter charger, please contact us, we will reply you within 24 hours.

【For Deity and Tentacle Timecode】Nitze N42-A1 timecode holder is designed for Deity TC-1 timecode and Tentacle Sync E MKII timecode. | 【Robust Aluminum Alloy Construction】The timecode holder is constructed from high-quality aluminum alloy, ensuring durability and longevity even under tough shooting conditions. | 【Easy Installation】It is effortlessly installed onto your camera cage or handle via one 1/4” screw on the bottom. And it locks the timecode via rotating the wingnut, providing a secure mounting solution without the need for complex tools. | 【Adjustable Width】With a user-friendly wingnut mechanism, the clamp offers adjustable width ranging from 33mm to 41mm. | 【Anti-scratch Protection】The timecode holder is fitted with rubber pads that grip your timecode without causing damage, providing a cushioned and stable hold to prevent slippage.

【Compatible Model】 Width: 20 15/16" (532 mm), Height: 11 13/16" (299 mm), Diagonal: 24" (610 mm). This blue screen protector for computer 24 inch is specially compatible with 24" Sceptre /HP /KOORUI /Dell /ViewSonic /BenQ /LG /SAMSUNG /ASUS Desktop with 16:9 Aspect Ratio. Please verify your computer screen's width and height measurements before ordering. It's not recommended to make your selection based solely on your computer screen's diagonal size. | 【Advanced Blue Light Filtering Technology】 After years of meticulous research, innovation, and extensive user testing by our expert team, this blue light screen protector 24 inch monitor is equipped with 9-layer blue light filtering technology, designed to effectively minimize eye fatigue and discomfort caused by prolonged exposure to blue light radiation. | 【Superior Anti-Glare Technology】 This 24 inch blue light filter for computer monitor utilizes advanced anti glare technology to effectively reduce glare and reflections caused by sunlight or bright environments. By shielding your eyes from the disruptive effects of glare, it also helps maintain the cleanliness of your computer screen. | 【Easy Installation】 Unlike traditional screen protectors with strong adhesives, our upgraded nano-silicone absorption layer enables for automatic bubble absorption and easy installation. Make sure to clean your computer screen with our provided accessories before installation to avoid bubbles. | 【Outstanding Craftsmanship and Materials】 Made with premium materials, this computer screen blue light blocker 24 inch offers exceptional durability and ultra-thin thickness for ultimate clarity. The precise cutting ensures an accurate fit without interfering with your laptop's closure. | 【Scratch Resistant Design】 Equipped with advanced scratch-resistant properties, this 24 inch blue light blocking screen protector effectively safeguards your screen from scratches and damage. The smooth surface minimizes fingerprints and smudges, making it easy to clean. | 【Ultimate Viewing Experience】 This 24 inch blue light computer screen protector maintains the clarity and high-definition quality of your display with its high light transmission. Enjoy crisp images and text display without blurring or distortion. It lets maximum brightness and vibrant colours shine through for an immersive viewing experience. | 【Suitable for Various Users】 Protect your eyes and enhance your digital experience! Our anti glare computer screen cover is designed for people who spend long hours on electronic devices, have vision problems, are sensitive to glare and prioritise eye health. | 【Meet All You Need】 If you encounter any installation issues or have any other concerns, please feel free to contact our customer service team. We will be dedicated to providing you with assistance and support to ensure that your problems are resolved and that you are satisfied.

Product Type:Light Bulb | Item Package Weight:0.362 Kilograms | Item Package Dimension:19.812 cm L X14.986 cm W X13.208 cm H | Country Of Origin: Mexico

HIGH-FIDELITY STEREO SOUND: Experience superior sound quality with MUSICOZY 3D Bluetooth Sleep Headphones; advanced Bluetooth 5.4 technology delivers immersive audio; enjoy music or audiobooks without the need for extra headphones; effectively blocks ambient noise for a peaceful sleep | 3D ERGONOMIC DESIGN: Crafted with a unique 3D contour, this Bluetooth sleep mask offers wider and deeper eye space; no pressure on the eyes or face; made with premium memory foam and ice silk lining for maximum comfort; helps you fall asleep faster by relieving facial tension | TOTAL LIGHT BLOCKING: Features a specially designed nose baffle that blocks out all light, creating a dark environment conducive to relaxation and deep sleep; ideal for use during travel, daytime naps, or whenever light sensitivity is an issue | ENHANCED BLUETOOTH 5.4 PERFORMANCE: Equipped with the latest Bluetooth 5.4 technology; enjoy faster, more stable connections with lower energy consumption; provides over 14 hours of continuous playtime, ensuring uninterrupted rest; no beeping sounds to disturb your sleep if the battery runs out | HANDS-FREE CALL FUNCTIONALITY: Built-in microphone and Bluetooth 5.4 allow for hands-free calling; easily answer or reject calls without removing the mask; perfect for those who want to stay connected while relaxing or on the go | PORTABLE & EASY TO USE: Includes a convenient carrying bag, USB charging cable, and user manual; easy to connect to any Bluetooth-enabled device; simply follow the quick setup instructions to pair and enjoy your sleep mask anywhere | IDEAL GIFT FOR ANY OCCASION: A perfect gift for anyone in need of a restful sleep; ideal for birthdays, holidays, or any special occasion; thoughtful and practical for men, women, teens, and frequent travelers

1. Support Single shooting, 1s continuous shooting, Continuous shooting, Bulb shooting, and Delay shooting. | 2. Half press to autofocus camera and full press to take picture wirelessly. | 3. Interchangeable cable design to allow you to use it on different brand cameras. | 4. Using FSK modulation to improve the reliability and stability of the products and 2.4GHz global free frequency. | 5. OPPILAS/DC0 compatible with Nikon: D800, D810, D700, D500, D300, D200, D1, D2, D3, D4, D5，D4， D5， D4s, N90s, F5, F6, F200, F90, F90X. Fujifilm: S5 Pro, S3 Pro. Kodak: DCS-14.

𝐍𝐎𝐕𝐄𝐋 𝐃𝐄𝐒𝐈𝐆𝐍 𝐀𝐍𝐃 𝐏𝐄𝐑𝐅𝐄𝐂𝐓 𝐆𝐈𝐅𝐓𝐒: Stylish and modern 3x zoom compact opera glasses binoculars telescope 3X25 with built-in foldable adjustable handle and neck chain, elegant shape, convenient and practical vintage opera glasses binoculars, suitable as a perfect Birthday Christmas Halloween Thanksgiving New Year's Day Holidays gifts for adults kids women men in musical concert cinema. | 𝐖𝐈𝐃𝐄-𝐑𝐀𝐍𝐆𝐈𝐍𝐆 𝐕𝐈𝐄𝐖𝐒 𝐀𝐍𝐃 𝐏𝐄𝐑𝐒𝐏𝐄𝐂𝐓𝐈𝐕𝐄𝐒: 3X magnification theater glasses binoculars prism with foldable and extendable handle and neck chain for indoor and outdoor viewing, specially suitable for theaters, horserace, Alaska cruise ship essentials, bird watching, musical concert and cinema. | 𝐌𝐈𝐍𝐈 𝐂𝐎𝐌𝐏𝐀𝐂𝐓 𝐋𝐈𝐆𝐇𝐓𝐖𝐄𝐈𝐆𝐇𝐓 𝐎𝐏𝐄𝐑𝐀 𝐆𝐋𝐀𝐒𝐒𝐄𝐒 𝐁𝐈𝐍𝐎𝐂𝐔𝐋𝐀𝐑𝐒: 3.54*1.96*1.18 inch, 6.2oz, delicate burgundy adjustable handle with chain, mini compact pocket size, lightweight to carry with gift bag. | 𝐄𝐀𝐒𝐘 𝐓𝐎 𝐀𝐃𝐉𝐔𝐒𝐓 𝐀𝐍𝐃 𝐅𝐎𝐂𝐔𝐒: Adjust by smooth "center-focus knob" and right eye lens, easy on focus for children adults kids women men in musical concert cinema opera, drama, live performances, etc. | 𝟏𝟎𝟎% 𝐐𝐔𝐀𝐋𝐈𝐓𝐘 𝐌𝐀𝐓𝐄𝐑𝐈𝐀𝐋𝐒 𝐔𝐒𝐄𝐃 𝐀𝐍𝐃 𝐓𝐄𝐒𝐓𝐄𝐃 𝐄𝐗𝐓𝐄𝐍𝐒𝐈𝐕𝐄𝐋𝐘: Beautifully designed high power vintage 8-12 years old kids binoculars with polished alloy and lens loupe made of BK9 prism glasses, vintage and refined, durable. | 𝟏𝟎𝟎% 𝐒𝐀𝐓𝐈𝐒𝐅𝐀𝐂𝐓𝐈𝐎𝐍: Warranty covered for all quality-related issues. We take care of all quality-related issues with a replacement or refund.

◀ FREE YOUR HANDS: Most convenient smart remote control for GoPro with comprehensive functions can switch between all modes quickly. Easy to press even wearing gloves. | ◀ LONG LASTING, FOCUS ON YOUR JOURNEY: Working time can last up to 10 hours after 2 hour fully charged. Easier to see the camera's status by colorful LED light even in strong sunlight, dark night, extreme weather or in high-speed movement. | ◀ MULTIPLE CONTROL AND LONG DISTANCE: TELESIN Remote can remote up to 6 cameras in a time. In the underground garage without signal interference, it can be remotely controlled for a distance of 80 meters, even in places with signal interference, it can be remotely controlled for a distance of at least 20 meters. | ◀Water Resistant and Dust Proof: Magnetic charging port design with water resistant protection (not suitable for underwater diving) and non gaps and openings, avoiding any sand and salt crystals from seawater staying in the connector gap. | ◀ SAVE YOUR TIME: Our exclusive and original creation function is shortcut mode. You can set your most favourite mode as shortcut mode. No matter what mode you are in, press the shortcut key to jump directly to your favourite mode.

All Aluminum Alloy Extension Arm Kit: 3 x aluminum alloy extension arms of different lengths (11.8”/6.5”/3.3”) + 3 x aluminum alloy screws + 1 x aluminum alloy wrench (fix the screws at the connection) | High Quality & Lightweight: The GoPro extension arms are made of high quality aluminum alloy, rustproof, rugged and durable, lightweight and stable | 1/4" & 3/8" Hole: Standard 1/4" and 3/8" screw holes, can be installed expansion accessories according to your needs | Hollow Design: This gopro helmet mount possible to greatly reduce wind resistance during riding and improve the stability of shooting. The end connection of extension pole bracket with a three-layer design ensures the stable connection | Multi-Purpose: The extension arm mount kit can be assembled into a extension pole, selfie stick or stabilizer, etc. Widely used in outdoor sports such as skiing, skateboarding, cycling, motorcycle, parachuting, etc

All Aluminum Alloy Extension Arm Kit: 3 x aluminum alloy extension arms of different lengths (11.8”/6.5”/3.3”) + 3 x aluminum alloy screws + 1 x aluminum alloy wrench (fix the screws at the connection) | High Quality & Lightweight: The GoPro extension arms are made of high quality aluminum alloy, rustproof, rugged and durable, lightweight and stable | 1/4" & 3/8" Hole: Standard 1/4" and 3/8" screw holes, can be installed expansion accessories according to your needs | Hollow Design: This gopro helmet mount possible to greatly reduce wind resistance during riding and improve the stability of shooting. The end connection of extension pole bracket with a three-layer design ensures the stable connection | Multi-Purpose: The extension arm mount kit can be assembled into a extension pole, selfie stick or stabilizer, etc. Widely used in outdoor sports such as skiing, skateboarding, cycling, motorcycle, parachuting, etc

Package Includes: Wireless Camera Flash Trigger & Remote Control Kit (1 Transmitter, 2 Receivers), shutter cable for Sony multi connector, studio light cable x2pcs, 3.5mm-6.3mm adapter x2pcs, 23A battery x1pc, AAA battery x4pcs. | 16 Channels, operation range up to 100 feet (30m), max sync speed of 1/250s, 433MHz frequency. | Use as an individual or group wireless flash trigger, and/or as a shutter release remote trigger. | The wireless flash trigger is compatible with all flashes with STANDARD HOT SHOE, such as Canon 580EX II, 580EX, 540EZ, 520EZ, 430EX II, 430EX, 430EZ, 420EX ,420EZ, 380EX, Nikon SB-900, SB-800, SB-600, SB-28, SB-27, SB-26, SB-25, SB-24, SB-700, etc | Since the flash trigger kit does not transmit TTL settings, use of a flash or light unit with full manual control is recommended.

Package Includes: Wireless Camera Flash Trigger & Remote Control Kit (1 Transmitter, 2 Receivers), shutter cable for Canon (replaces RS-60E3), studio light cable x2pcs, 3.5mm-6.3mm adapter x2pcs, 23A battery x1pc, AAA battery x4pcs. | 16 Channels, operation range up to 100 feet (30m), max sync speed of 1/250s, 433MHz frequency. | Use as an individual or group wireless flash trigger, and/or as a shutter release remote trigger. | The wireless flash trigger is compatible with all flashes with STANDARD HOT SHOE, such as Canon 580EX II, 580EX, 540EZ, 520EZ, 430EX II, 430EX, 430EZ, 420EX ,420EZ, 380EX, Nikon SB-900, SB-800, SB-600, SB-28, SB-27, SB-26, SB-25, SB-24, SB-700, etc | Since the flash trigger kit does not transmit TTL settings, use of a flash or light unit with full manual control is recommended.

【Captivating Blue Linear Flare】Installing the K&F Concept streak blue filter in front of your lens could create the same flare as the anamorphic lens. Whether it’s a photo or video, this filter adds a linear flare effect to your images, producing stunning visual effects and enhancing artistic appeal. | 【Superior Optical AGC Glass】Double-sided grinding and polishing technology, ensuring exceptional clarity and maintaining the integrity of light transmission for sharp and clear image quality, no color cast. | 【Advanced Anti-Reflection Coating】Both sides of the glass with nanometer coatings, a total of 28-layer coating, waterproof and scratch-resistant, effectively reduces surface reflections and ghosting issues, ensuring high-quality and artifact-free images. | 【Precision-Crafted Frame Design】The frame features a CNC-trimmed pattern design, ensuring a secure grip and easy installation and removal of the filter and other accessories. The filter frame is made of aerospace-grade aluminum with a thickness of only 5.3mm, ultra slim design prevents vignetting, ensuring optimal performance across different focal lengths. | 【Note】This filter is compatible with all 52mm lenses. Please verify your camera's lens thread size. The number is beside a "ø" (diameter) symbol.

【Import Optical Glass】Made by import high definition Japanese premium optical glass double-side 18 multi-layer coatings. | 【Ultra Slim & CNC Non-Slip Frame】Made by aviation aluminum ultra slime frame effectively avoided vigenetting & dark corner on wide-angle lenses, CNC-non-slip design helps easily to install and remove the filter. | 【MC UV Filter Function】UV protection filter has two functions , one to weaken blue tone in images causing by UV rays , the 94% transmission ensures the clearity and sharpness of photos. Another is for lens protection from dusty and scratches. | 【Circular Polarizer Function】 Circular Polarizer (CPL) Filter helps reduces glare from metallic surface increase color saturation & contrast.This effect is often used to enhance the contrast and saturation in blue skies and white clouds. | 【Kit Includes】1* Circular polarizer filter + 1* MC UV protection filter. Note: this uv cpl filter only fit for 77mm camera lens, please verify your lens size before ordered.

Strong and Sturdy: Made of high-quality aluminum alloy with solid construction, 32mm ball diameter is durable and tough enough. | 360 Degree Roating: 360 Degree Panoramic Base with 3 twist locks can set your camera at different angle easily. | High Compatibility: 1/4 inch quick shoe plate is suitable for DSLR cameras and camcorders,3/8 inch screw thread hole is for connecting tripod, monopod, slider and other stands. | Small & Portable: Weight 0.63 lbs/0.287kg; Ball diameter 32mm; Height:2.95 inch/75mm; Max loading:26.4lbs/12kg（the plate size: length 2.36 inch/60mm, width 1.5 inch/38mm） | Strong Stability: The ball head has a strong locking force, it equipped with a spirit level, can make the camera in a balanced state easily.

Package Includes: Wireless Camera Flash Trigger & Remote Control Kit (1 Transmitter, 2 Receivers), shutter cable for Nikon (replaces MC-DC2), studio light cable x2pcs, 3.5mm-6.3mm adapter x2pcs, 23A battery x1pc, AAA battery x4pcs. | 16 Channels, operation range up to 100 feet (30m), max sync speed of 1/250s, 433MHz frequency. | Use as an individual or group wireless flash trigger, and/or as a shutter release remote trigger. | The wireless flash trigger is compatible with all flashes with STANDARD HOT SHOE, such as Canon 580EX II, 580EX, 540EZ, 520EZ, 430EX II, 430EX, 430EZ, 420EX ,420EZ, 380EX, Nikon SB-900, SB-800, SB-600, SB-28, SB-27, SB-26, SB-25, SB-24, SB-700, etc | Since the flash trigger kit does not transmit TTL settings, use of a flash or light unit with full manual control is recommended.

The biggest highlight of this backdrop is that its non-transparent property, the backing of this backdrop is cloth, NOT mesh, so lights will be blocked about 99%. | This is the only sequins backdrop/curtain on the market, if you like the solid build and non-transparent curtain, it is perfect for you. | The biggest advantage is that you wouldn’t need to worry about the scenes behind the curtain shown on your photograph, and still have the shiny looks as conventional sequin backdrop. | About the Seam: Due to machine limitation, there are two seams when the width of the backdrop is over 4 feet, but the position is well designed and not easy to show in photos. 4FTx6FT, 4FTx8FT have no seam. | The pictures are for your reference only. Please choose the most suitable size according to your needs. All the size of backdrops are width x height format. If you select 6 x 8 feet means you get 6ft wide and 8ft high backdrop.

This JL-23 Lens Collar Tripod Mount Ring is designed for Sigma 100-400mm F5-6.3 DG DN OS (E/L Mount) Lens Sony FE mount Sigma 105mm f/1.4 DG HSM Art Lens. | The bottom of the lens ring is an 80mm quick release plate with 1/4" and 3/8" screw holes Compatible with Arca-Swiss tripod ball head, panoramic head and clamp. | The tripod mount ring mount on the tripod, it helps you fix and balance your tele lens which is heavy or long lens hanging off the front of camera. | Made of aviation aluminum materials, CNC precision machining,built-in non-slip patch to protects your lens. | The Quick Release Plate is replacement for Manfrotto 501PL compatible with manfrotto heads that use the RC5 quick release system (501, 503 & 701 NG Heads)，701HDV 501HDV 503HDV MH055M0-Q5; Replaces old part #3433PL.

CRYSTAL CLEAR SOUND QUALITY: This USB telephone headset with noise cancelling microphone and HD wideband speaker delivers you and called side crystal clear sound quality, every word can be hear loud and natural. Laptop/Computer headset with Digital Signal Processing (DSP) technology which digitally optimizes your voice and music, as well as suppresses echoes. Perfect for Skype chat, conference calls, webinar, music, working from home, remote work, call center, office, education and more. | ULTRA COMFORTABLE and ERGONOMIC DESIGN: USB headphone with bendable and rotatable microphone arm allows you adjust the microphone to any talking position, also place the microphone on either side freely. Big and soft protein leatherette ear cushion provides you all day comfortable wearing, no pressure no pain to your ear. Click stop adjustable steel headband perfect fit for all head sizes. Acoustic Shock Protection(ASP) technology to protect your hearing all the time. | SUPERB DURABILITY and 2-YEAR WARRANTY: Superb durability computer USB headset with reliable components structure, quality plastics, excellent quality mic and speaker, reinforced USB cord, professional designed for the toughest environment. From raw material to every component we strict control the quality for you from the origin. 2-YEAR manufacturer warranty and 45 days money back guarantee. Any issue pls feel free to contact us, our team will solve for you within 24 hours ASAP. | WIDE COMPATIBILITY and MULTIPURPOSE: This premium USB Headset is Plug and Play. No installation driver is needed for Computer, PC, Laptop, Mac and other USB compatible devices. As well as work for Skype, Skype for Business/Lync, Microsoft Teams, Cisco, Zoom, 3CX, Avaya, Countpath Bria, and most other well-known softphones or softwares. With convenient in-line controller, easy to adjust this PC headphone volume up/down and microphone mute/un-mute. | SPEECH RECOGNITION MICROPHONE: This computer USB headset with superior voice recognition microphone ideal choice for students education, such as Language-learning, Dictation, Online Course, Nuance Dragon Speech Recognition Software, Rosetta Stone, ..., and many more.

【Compatibility】Width: 13 9/16" (13.6 inches/345 mm), Height: 7 5/8" (7.6 inches/194 mm), Diagonal: 15.6" (396.24 mm) - Aspect Ratio 16:9. This 15.6" Magnetic privacy filters is designed to be compatible with Lenovo, HP, Dell, Acer, Asus, Samsung, and other 15.6in 16:9 Aspect ratio laptop brands. Please verify your screen's width and height measurements before ordering as it's not recommended to only measure your screen's diagonal size. Contact us if you have any questions about dimensions. | 【Superior Privacy】Our laptop privacy screen protector Limited viewing angle narrows the field of vision to +/- 30 degrees, facing the screen can see, but off to the side can only see a darkened screen, this 15.6" screen protector keeps the information on your screen private and blacks out your laptop screen to any curious onlookers. | 【Automatic Snap-on Magnetic Attachment】Our laptop privacy screen features an innovative automatic snap-on magnetic attachment design. Simply place the privacy screen along the top and side of your laptop, and let the magnets snap on to the screen. You no longer have to deal with adhesive materials that can damage your laptop's screen. Plus, it's easy to remove and reattach the screen whenever you need it. | 【Eye Protection】 Mamol magnetic laptop privacy screen not only protects your personal privacy, but also reduces UV light up to 97% and Blue light up to 65% to help with eye strain after hours of screen time. It also protects your screen from scratches, dust, and scrapes. | 【Package Content & Lifetime Warranty】Included Mamol Magnetic laptop privacy screen 15.6 inch, along with one screen cleaning kit, One single sided adhesive magnet, One laptop screen protector storage clip , One large size nanofiber cleaning cloth and one detailed instructions for easy installation. We provides lifetime service for this screen protectors. If you have any problems, please feel free to contact us. we will provide you with satisfactory service within 24 hours.

【High Speed】Support PCIE4.0 protocol, up to 32GB bandwidth, which is doubled compared to the PCIE3.0 bandwidth on the market. | 【Quick Recovery Function】It can directly save the game to the SSD quickly, and it can be loaded and restored directly when it is enabled next time. | 【Efficient Heat Dissipation】The all-aluminum alloy body maximizes the heat dissipation effect, quickly dissipates the heat generated by the high-speed running memory, and prolongs the service life of the hard disk. | 【How to Use】Insert the cfexpress b to ssd adapter with WD SN530 SSD into the host, you can easily load the game and play anytime. | 【Strong Compatibility】Easily compatible with Xbox Series X and Xbox Series S consoles, feel the super fast loading speed and wonderful game world. | 【Lightweight & Small】The adapter is very small in shape, easy to carry, and convenient for daily travel.

v?Microphone Function for Live-Streaming?5-in-1 Upgrade Design, iPhone microphone adapter + dual USB camera adapter + HDMI adapter + lighting charging port. With 3.5mm microphone headphone jack, you can directly use the iPhone/iPad to live-streaming, and at the same time, you can project the iPhone screen to the big screen through the HDMI port. It works with most live stream & music app like Twitch, Tik Tok, YouTube, Google play music, iTunes and Spotify. (Note: phone call is not supported.) | v?Up to 1080P Digital Adapter?The iPhone digital av adapter supports mirroring of what is displayed on your devices screen (including apps, presentations, websites, slideshows and more) to your HDMI-equipped TV, display, projector or other compatible display in up to 1080p HD. Enjoy a clear visual feast in daily life and work. Note: It NOT SUPPORTS APPs which have 'HDCP' video copyrights protection like Netflix, video, HBO go, HULU, SKY Q and Honda motor. | v?Dual USB-Friendly Office Helper?Lightweight and durable, short cable and better performance. With USB camera adapter, you can directly plug the PC keyboard or mouse into the iPad, improving your typing speed and productivity. You can also charge, view photos or videos simultaneously, data transmission rate up to 60MB/S 90MB/S, a great choice for copying photos or videos from the camera in a short time. | v?Wide Compatibility? Support more USB devices, like hubs, ethernet adapters, audio / MIDI interfaces, keyboard, camera and card readers for compact flash, and more. Compatible with iPhone 13 mini/ 13/ 13 Pro/ 13 Pro Max/ 12 mini/ 12/ 12 Pro/ 12 Pro Max/ 11/ 11 Pro/ X/ XS/ XS MAX/ XR/ 8/ 8Plus/ 7/ 7 Plus/ iPad/ iPod, support all iOS devices run on iOS 9.2 or above, no need APP, plug and play. | v? and Support?The 5 in 1 HDMI Adapter is very simple and stylish, easy to carry, and can be put in wallets, school bags, backpacks, briefcases, school bags, etc. Anytrox provide 45 days money back , 1 year free replacement and 24 hours friendly customer service about the headphones splitter . If you have any questions, please don't hesitate to contact us. | Connector type: HDMI / USB / Microphone | Compatible devices: iPhone/iPad/iPod

[Silkland] The first brand in the industry to launch usb c to dp 1.4 cable 15FT. Supports 8K@60Hz, 5K(5120x2880)@60Hz, 5120x1440@120Hz, 4K@144Hz, 2K@240Hz/165Hz and can drive up to 4 1080P monitors. Avoid screen flickering and audio clipping and stream sports events, movies, photos and albums smoothly. No need for adapters or drivers. | [Compatible VESA DP 1.4 standard] Total bandwidth of High Bit Rate 3 (HBR3) and Connections is 32.4Gbps, avoid screen flickering for the best video experience. Supports DSC, FEC, HDR/DisplayHDR, HDCP 2.2/1.4 and Windows PC MST (Multistream Transport). Supports Macbook Clamshell Mode only connected to the power. | [Thunderbolt 4/3 Device Companion] MacBook Pro(2021-2017), Mac Studio, Mac Mini 2018/2020, iMac(2018/2017), iPad Pro (2021/2020/2018), Dell XPS 15/13, ALIENWARE m15/m17, Surface Book 7, Chromebook/Pixelbook, Yoga 920, Samsung Galaxy S21/S20. | [Top-Notch Quality] 28 AWG high quality copper wire ensures stable signal transmission. The 24K gold-plated interface conducts faster, and the built-in tinplate can effectively shield signal interference. Quality nylon braided jacket has passed rigorous bend tests over 15,000 times and is extremely durable. Aluminum shell ensures good heat dissipation. | [Services from the brand] Free Lifetime Replacement or Money-back Guarantee if quality issue, Please feel free to contact us if you have any question, friendly and prompt customer service will be offered within 18 hours

【ALUMINUM ALLOY MATERIAL】Superior Aluminum-Alloy Construction, CNC Precision Finishing, Anodized Surface，it is very strong and durable. | 【WIDE COMPATIBILITY】 Equipped with 1/4 screw, the removable quick release plate is suitable for all SLR cameras. 3/8 screw hole at the bottom can be attached to tripod or monopod. | 【FREE ROTATION SHOOT】With 360 Degree Panoramic Base with 2 twist locks which can set your camera at different angle easily and quickly tighten or loosen the ball. | 【PROFESSIONAL】Adopt both horizontal and vertical bubble level to enhance perception of position, is also benefit to positioning the camera and control the balance. Three Bubble Levels are used to adjust the degree of head's level, having more control of horizontal and vertical shooting. | 【Light weight】135g/0.29lb; Height: 70mm; Ball diameter: 22mm; Max Load: 5 kilograms/11 pounds.

Package Includes: Wireless Camera Flash Trigger & Remote Control Kit (1 Transmitter, 2 Receivers), shutter cable for Nikon (replaces MC-30), studio light cable x2pcs, 3.5mm-6.3mm adapter x2pcs, 23A battery x1pc, AAA battery x4pcs. | 16 Channels, operation range up to 100 feet (30m), max sync speed of 1/250s, 433MHz frequency. | Use as an individual or group wireless flash trigger, and/or as a shutter release remote trigger. | The wireless flash trigger is compatible with all flashes with STANDARD HOT SHOE, such as Canon 580EX II, 580EX, 540EZ, 520EZ, 430EX II, 430EX, 430EZ, 420EX ,420EZ, 380EX, Nikon SB-900, SB-800, SB-600, SB-28, SB-27, SB-26, SB-25, SB-24, SB-700, etc | Since the flash trigger kit does not transmit TTL settings, use of a flash or light unit with full manual control is recommended.

The Thumbs Up Grip attaches to your Leica Q2 via the hot shoe to dampen vibrations and provide stable, protected contact with the camera. | This grip provides a more ergonomic structure to the camera, allowing for greater one-handed operation as well as more balance and less grip pressure required when shooting. | You can securely grip the camera and hold it in any position with the thumb up. | Provides a better balance and grip for the camera. | Protect the electronic contacts.

Long Operating Distance - Using 2.4GHz digital radio technology, strong anti-interference, can working up to approx 80m/262 ft remote distance. And it features no directionality, you can control it in anywhere you want. You don't need to put the reciver to the hot/cool shoe. | Wireless and wired operations - This remote control can by using transmitter wirelessly to take photo shoting, receiver also can be used as a wired shutter remote to release photo. It is can reduce camera shake, let the photo more clearly. | 4 Shutter Release modes - Support autofocus. Single shoting, continuous release, BULB shooting (long exposure) and delay release of 3s shooting. Replaces Nikon MC-DC2, MC-30, MC-36A. | Compatible cameras - with Nikon D3, D4, D4s, D5, D6, D800, D850, D800E, D810, D810A, D700, D500, D300, D200, F6, F100, F5, F90X, F90, N90s, D1X, D2H, D3X; For Fujifilm S5 Pro, S3 Pro; For Kodak DCS-14n. | Compatible cameras - for Nikon Df, Z7, Z7 II, Z6, Z6 II, Z5, Z9, D750, D780, D7500, D7200, D7100, D7000, D5600, D5500, D5300, D5200, D5100, D5000, D3300, D3200, D3100, D610, D600, D90, COOLPIX A, COOLPIX P1000, COOLPIX P7700, COOLPIX P7800, COOLPIX P950 (NOTE: D3400 camera is not supported).

STRONGER - Heavy duty D Ring accommodates even the largest carabiners while stainless steel construction ensures up to 14 lb carrying capacity of this D-Ring screw | MORE SECURE - Rubber gasket secures clip to your camera through the tripod attachment - ideal for camera straps, slings, and carrying accessories. such as flashes, lenses, binoculars and more. | FLEXIBLE MOUNTING - Attaches to any device with 1/4"-20 (tripod) mounting threads. An adapter (not included) is required for mounting to 3/8 threads. | LOW PROFILE - D-Ring fits full-size (HMS) carabiners as well as most camera strap attachments from other brands, while the minimalist profile doesn’t get in the way of your existing accessories | THE PERFECT GIFT - Supports up to 14 lbs of gear - Peak performance in a tiny screw design, this D-ring is ideal for rapid paced hikes, adventure photography, wedding photographers, and these D-Rings make the ideal gifts for photographers | ABOUT DANGER BUDDIES - Based in Wisconsin, we are a partner organization to Wisconsin Climbers Association and Milwaukee Riverkeeper. Your purchase helps to ensure a safe, accessible outdoors for all!

【10 Stop Neutral Density Filter】The MRC ND1000 Filter features precisely German SCHOTT B270 Glass and aviation grade aluminum frame, 16-Layer Multiple Resistant Coated, provides 10 f-stop reductions of light without effecting color balance, enables you to control the depth of field and movements more easily. | 【MRC Optical Coating】16 Layer Multi-resistant Coated to significantly reduce lens flare and ghosting while making the filter Anti-Scratch, Reduce Reflection, Water Repellent, Increase Surface Durability, Oil & Dust Resistant. All these fantastic attributes are essential for working effectively outdoors. | 【EXPOSURE REDUCTION】Eliminates overly bright & washed-out images and enables longer exposures to capture the beauty of time and movement, allows a wider aperture to achieve a decrease depth of field. | 【SLOWS SHUTTER SPEED】3.0 ND Filter allows slower shutter speeds to produce blurred motion effects and wider apertures in bright light. | 【Fitment】Compatible with all 82mm camera lenses. Your camera's lens thread size will be marked somewhere on the lens barrel or printed underneath your lens cap. This number is always preceded by a "Ø" (diameter) symbol. For example: Ø82 = 82mm lens thread size.Make sure you select the correct size to fit your lens.

[Qualcomm Bluetooth 5.1]: Applying optimized Qualcomm Bluetooth 5.1 chip, E1+ helmet Bluetooth headset has faster data transmission speed and longer connection distance. The communication experience becomes more stable and reliable. | [CVC Noise Reduction Technology]: E1+ motorcycle helmet speaker adopts advanced CVC noise reduction technology to eliminate the echo and ambient noise of the call, so that the sound you hear is more clear and stable, with 3D stereo sound effect. | [360mAh Battery Capacity]: E1+ left and right speaker each have a built-in 360mAh rechargeable battery. When charging, the red light is on, and when it is full, the red light is off. The charging time is about 2.5h, the call/music playing time is up to 19h and the standby time can reach 200h, which is a good choice for long-time riding enthusiasts. | [Connect 2 Mobile Phones]: E1+ bluetooth helmet speaker can connect 2 mobile phones via bluetooth and support auto-receiving calls, play/switch music, adjust volume and voice assistant function. The connection distance with mobile phone can reach 10 meters. | [Can be Paired with Q7 Intercom]: E1+ helmet speaker can be used as a intercom and connected with Q7 intercom, and they will be automatically paired when entering the pairing mode. The talking distance range is between 10-20m. It is suitable for couples or partners sitting in the front and rear seats of a motorcycle.

COMPATIBILITY - Specifically made for DJI Mini 3 / Mini 3 Pro drone , it combines the advantages of ND scrim and CPL polarizer to eliminate reflections, improve saturation, and enhance contrast for a more three-dimensional and transparent image. Reduces shutter speed and extends exposure time to prevent overexposure. | BRDRC ULTRA-CLEAR TECHNOLOGY - Precision crafted and polished with dual-sided multi-layer nano-coating to provide water, oil, dirt and scratch resistance. | ALUMINUM FRAME - Aerospace grade aluminum frame with laser engraved logo that won't fade and black matte finish to prevent any light leakage or ghosting. | ULTRA-LIGHTWEIGHT - At only (0.04oz) 1.3g in weight, the filter won't add extra burden to your gimbal and won't affect the normal flight of your drone. | QUALITY ASSURANCE - Soft foam inlay packaging for easy transport and to ensure safe delivery of the filter. All BRDRC filters are crafted in a stringent and precise system for quality assurance. If you have any questions about the product, feel free to contact us and our professional team will resolve it within 24 hours.

Two different methods to control: 1. Wirelessly control the receiver by the transmitter to realize Auto-focus, single shooting, wireless video shooting, 3-sec delayed release, continuous shooting, and long exposure. 2. Connect the receiver with the camera by a connecting cable to perform Auto-focus, single shooting, continuous shooting, and bulb function (long exposure) for time-lapse photography | Durable quality with stable performance: 2.4GHz digital radio technology provides strong anti-interference and stable working distance up to 262 ft/80 m. | Professional Anti-shake: release your hand without touching the camera shutter release button, eliminate even the slightest shake that could possibly ruin your entire photo or video capturing clear shots is better than capturing blurred ones | COMPATIBLE CAMERAS: Nikon Df, Z7, Z7 II, Z6, Z6 II, Z5, D750, D780, D7500, D7200, D7100, D7000, D5600, D5500, D5300, D5200, D5100, D5000, D3300, D3200, D3100, D610, D600, D90, COOLPIX A, COOLPIX P1000, COOLPIX P7700, COOLPIX P7800, COOLPIX P950 | COMPATIBLE CAMERAS: Nikon Z9, D3, D4, D4s, D5, D6, D800, D850, D800E, D810, D810A, D700, D500, D300, D200, F6, F100, F5, F90X, F90, N90s, D1X, D2H, D3X; Fujifilm S5 Pro, S3 Pro; Kodak DCS-14n

10G Module Features: Low Power Consumption ≤2.5w; Interface: RJ-45; Cable Type: Cat6/6a; Supports to 1G/2.5G/5G/10Gbps; Fully Compatible with 100+ Vendors, Hot Pluggable SFP+ MSA Compliant. | Compatible for: Compatible for BladeSystem 813874-B21, and other Open Switches. Widely used in fiber switches, routers, NIC, server or other fiber optic equipments with 10Gb SFP+ ports. | Easy to use: Plug and play, hot-pluggable. Rotate the ring latch down at 90 degree angle to unlock, then pulling transceiver out from switch. | High Quality: All of products are manufactured under strict quality control system, every module has been tested one by one on different switches before shipping, to ensure compatibility with different brand of switch. | QSFPTEK Guarantee:30-day free return, 3-year warranty, lifetime technology support. We are a manufacturer of transceiver. If you are not sure about the compatibility of your device, please feel free to contact us.

【Professional Design】The diving case is specially designed for DJI Osmo Pocket 2, which is tightly sealed and fits the camera perfectly, providing the ultimate protection for your camera during outdoor adventures and underwater activities. | 【Durable and Compressive】The waterproof shell is made of environmentally friendly high-end PC material with excellent impact resistance. Stainless steel buttons have the functions of anti-oxidation, anti-rust and anti-corrosion. Durable and practical anti-surf pressure won't spoil your HD photos. | 【High light transmittance】The special 360° dome design that propitious to protect the camera by dispersing the underwater stress, 98% transparency, not affect its photographic effect, remain image quality. | 【Anti-fog film】The waterproof case is equipped with an anti-fog film, which can effectively protect your DJI Osmo Pocket 2 lens from fogging in cold and humid environments, preventing fogging inside the protective case and affecting shooting and camera safety. | 【Strong Practical】The sealing of the protective case is not only waterproof, but also prevents dust from entering the camera more effectively. Easy to install and easy to use. It is suitable for all kinds of extreme sports and can capture more wonderful moments.

Radar Experts Agree, Best Mounting Spot! | Complete mounting kit includes device clip. | No More Troublesome Suction Cups. | Installs in Minutes to Most Vehicles. | Made in the USA. Detector not included.

【Attention】 Manual adapter without electrical contacts in the adapter ring and cannot achieve auto diaphragm or auto-focus, please be careful. | 【Function】 This adapter helps to connect Olympus OM mount lens to NEX E mount cameras. Infinity focus function is allowed, please adjust manually when first use. | 【Material】 Upgrade all-metal and matting varnish design to avoid light reflection, high quality adapters with anodized aluminum construction. | 【Cameras】 Designed to compatible with Sony Alpha E-mount Cameras: Sony Alpha α7, α7R, α7S, α7 II, α7R II, α7S II Sony Alpha α3000, α5000, α6000, α6300, α6500,α3500, α5100, αQX1, PXW-FS7 Sony NEX-3, NEX-5, NEX-C3, NEX-5N, NEX-7, NEX-F3, NEX-5R, NEX-5T ,NEX-6, NEX-F3, NEX-3N Sony NEX-VG10, NEX-VG20, NEX-VG30, NEX-VG900, NEX-FS100, NEX-FS700, NEX-EA50 etc. | 【Verify Your Lens and Camera Mount】 You can find your lens/camera mount in the len's/ camera's original user manual. Or find your lens/camera on the manufacturers' website and under the product specifications look for "mount type". Any question about products please contact us freely for suggestions.

For use with Sony ILCE-a1, 6100, 6400, 6600, a7C, a7M3, a7M4, a7RM3, a7RM4, a7SM3, a9, a9M2, DSC-RX0M2, RX100M7, ZV-1, ZV-E10, ILME-FX3. (please note: some camera models need to update the camera system software to work with this shutter remote, such as A6400, A9, A7M3, A7RM3 and RX0M2. Please see the details in the Product Description below this page.) | Essential camera controls are provided: focus buttons for precise control of even subtle focus changes, a lock switch that prevents accidental operation during transport, shooting a still image, movie recording start/stop, and power/digital zoom. There are also two custom buttons that mirror the functions of the C1 and AF-ON buttons on the camera body | The wireless remote runs on one CR-2032 lithium button battery (included). Communication distance: control range is about10 m (32.8 ft); Coverage:360°, Bluetooth communication provides reliable remote control even in bright sunlight or when there are obstacles between the commander and camera | Great for self-portraits, group shots, night scenes, long exposures and so on. The remote is designed to resist dust and moisture plus hot and cold temperatures, offering reliable operation in a wide variety of environments and weather conditions | The commander itself is designed to be easy to hold and operate. Measuring only 1.3" x 0.6'' x 3.9", easily fits in even a small pocket

✅1000Base-LX/LH SFP: Gigabit Ethernet Single Mode SFP Module, 1.25 Gb/s, 1310nm wavelength, Duplex Dual LC, SMF, operates on Single-mode (OS1/OS2/OS3) LC/UPC fiber cable spans of up to 20km (12.4 mile) in length. 4 Pack. | ✅Wide Compatible: For Cisco GLC-LH-SMD, Meraki MA-SFP-1GB-LX10, Ubiquit UniFi UF-SM-1G, Mikrotik, Intel, Netgear AGM732F, D-Link, TP-Link and Other Open Equipments. | ✅Hot-swappable: PLUG and PLAY, with Advanced DDM Function to monitor real-time parameter and state on fiber links. SFP MSA Compliant, IEEE 802.3z- compliant. | ✅Low Power Consumption: Less than 1.05 watt power consumption, that can save costs wisely. Low EMI and advanced ESD protection. Each sfp module is individually done test before packing. | ✅After-sales service: Provides 24/7 Customer Service, 30 Days Free-returned, 3 Year Free Warranty and Lifetime Technology Support.