TEELSIN Upgraded Ultra Long Selfie Stick (2.7 meters/106 inches) designed for group photo shooting in gathering activities, party, family trip, traveling, camping, pinic, sports, games and also makes it possible to get full view selfie photos! | Extendable at more than 6 Lengths, the most frequestly used lengths are 40cm/15.75", 95cm/37.4", 125cm/49.2", 180cm/70.86", 205cm/80.7", and the longest 270cm/106"! | Upgraded carbom fiber material, more stable than the first generation, no bending and waggle, can achieve invisible shooting effect! | The bottom comes with a universal tripod mount which makes it possible to connnect with a camera/phone tripod stand (We suggest use a stronger tripod if you extend the selfie at long length). | The shortest length is only 40cm/15.75", more easily to store and carry in your packpack and luggage travel case! Flexible: Support a variety of action cameras. Multi-angle: 360°Rotation helps to capture every wonderful moment!

Works with all EZO circuits | Fully isolated voltage and data | Connects to a raspberry Pi | Serial to USB converter | Micro USB B connector

All Metal Design | Smooth surface for effortless mount | Infinity Focus Guaranteed | Accurate Flange to Focus distances | 24 Month Manufacture Warranty

Easily adds two serial port and one parallel port through an available PCI Express slot. 16C650 UART serial port with data transfer rate up to 250Kbps. Compliant with PCI Express 2.0 Gen 1. Compatible with IEEE 1284 -1994 parallel port standard for SPP/Byte/ECP Mode. | Single-lane (X1) PCI Express end-point controller with PHY integrated. Full serial modem control. Hardware and software flow control. | 5, 6, 7, 8 and 9-bit serial format. Even, odd, none, space and mark parity. On chip 256 byte FIFO buffers in transmit, receive path. | Works as standard RS-232 port or with 5V or 12V power output for devices that require power (such as handheld scanners, table scanners, POS displays, etc.), power output configurable via jumpers. Supports PCI bus Power Management Interface Specification Revision 1.2. | Dual-profile design fits full height and low-profile system chassis with the included spare low-profile brackets. Perfect solution to connect with POS systems, industrial testing and control devices, security systems, logistic management equipment, printers, scanners, etc.

Suptig 2.0 inch LCD Non-Touch Screen Compatible with Gopro Hero 4 Black/Gopro Hero 4 Silver /Gopro Hero 3+/Gopro Hero 3 | VIEW REAL-TIME AND PREVIEW: You can view real-time images captured by the machine and preview previously taken photos and videos view the battery life. | Easy to install and remove: lightweight, Compact. Size(2.28x1.57x0.39in) | Install the extension back cover to the front shell can be waterproof 114 ft, in the diving, rainy day, snorkeling, swimming, etc. can also real-time watch your photos and videos | What You Get: 1xSuptig LCD Screen(Non-Touch), 2xBacPac Backdoors, 1xMicrofiber Cleaning Cloth. Do not hesitate, you can try it, it will make you even better. Believe us, dear friend.Use it will bring you more convenient. enjoyment 24-Month Warranty and 30 Days Money Back Guarantee.

VERSATILE FILM: two packs of Polaroid instant film for one low price. Our double pack of film contains two sets of color 600 film for a total of 16 photos. Compatible with for 600 cameras and I-type cameras | LIGHT IT UP: Polaroid Instant Film loves light. The more light in your shot, the better your photo will turn out. Always shoot in bright light or use the camera flash. | DEVELOP: All photos appear blank at first. Photos develop within 15 minutes. Shield photos from the light and place them face down as they develop. | CREATE: Every photo you create is rich textured and unique. Unpredictable, imperfect, and impossible to reproduce. | BACKWARD COMPATIBLE: Film is compatible with Polaroid 600, Polaroid Impulse, Polaroid SLR680, and newer Polaroid i-Type One Step 2 cameras.

Replace a damaged trackpad,IPD trackpad flex cable and restore the touch sensitivity of your laptop for MacBook Air 13" Mid 2013 to 2017 with model A1466 | A worn out trackpad may have cosmetic scratches or a cracked surface causing it to malfunction. In addition, an aging trackpad may become unresponsive making your laptop difficult to control. | IPD trackpad flex cable connects the trackpad to the logic board.It carries input from other upper case components as well, so a damaged trackpad cable may affect the functions of the keyboard and power button. | This multitouch, glass trackpad allows touch input and clicking, while also providing a connection for the keyboard.It connects to the logic board via the IPD trackpad flex cable | Compatible with MacBook Air 13" A1466 Mid 2013 to 2017(Not fit for 2012): MacBookAir6,2 Mid 2013: MD760LL/A or MD761LL/A,MacBookAir6,2 Early 2014: MD760LL/B or MD761LL/B,MacBookAir7,2 Early 2015: MJVE2LL/A,MJVG2LL/A or MMGG2LL/A,MacBookAir7,2 Mid 2017: MQD42LL/A or MQD32LL/A | Identifying Numbers: APN : 923-0438, 923-00976, 923-0441 PPN : 593-1604-B | This item can be returned in its original condition for a full refund or replacement within 30 days of receipt.

All Metal Design | Built-in 1.4x Multi-Coated Focusing Correction Lens | Removable Glasss Element for Macro Photography | Smooth surface for effortless mount | 24 Month Manufacture Warranty

1. This lens collar is tailor-made and Compatible with Canon EF 70-200mm f/2.8L USM, EF 70-200mm f/2.8L IS USM, EF 70-200mm f/2.8L IS II USM, EF 70-200mm f/2.8L IS III USM, EF 100-400mm f/4.5-5.6L IS USM, EF 35-350mm f/3.5-5.6L USM, EF 300mm f/4L IS USM, can't be used for other lens. | 2. The net weight of the tripod mount ring is about 135g, inner diameter is about 78mm, the ring width is about 18mm; Bottom is added 65mm long quick release plate, with 1/4" and 3/8" screw holes; laser scanning technology is used to accurately obtain the lens parameters, and then the shape of the inner diameter of the lens support is accurately carved based on the data. | 3. The tripod mount ring is made of high-density Aviation Aluminum; precisely machined by world-class high-end CNC turning center and hollowed-out carved by diamond combined cutter heads; adopting vibration polishing technology, which improves grinding precision by 20% than manual; multiple anodized, which improves the fineness and uniformity of the color of the metal surface by 10%; the appearance and exquisite workmanship is much better than similar products made by mold. | 4. This lens support bottom is Arca-Swiss fit quick release plate, compatible with RRS / ARCA-SWISS / PMG / WIMBERLEY / MARKINS / PHOTOCLAM / SUNWAYFOTO / BENRO / SIRUI / MARSACE / ISHOOT tripod ball head of Arca 39mm fit, suitable for iShoot IS-JZ30 / IS-JZ50 / IS-JZ64 / IS-QJ58 / IS-QJ64-FD / IS-JZ60BK / IS-JZ70MFT / IS-JZ80BK clamp. | 5. Pakage Includes: 1 x iShoot Tripod Mount Ring IS-C720XB (The other items in the photos not listed here are for illustrating only, not included.)

Brand new. High quality repair replacement parts . | This product are tested before shipping. | Easy for you replace your faulty,cracked or broken one ,seller remind that you should replace this in the off state. | Professional skill is highly recommended, installation instruction is not included | Please check the Model Number of your device before purchasing this Item. You can find the Model type of your device on your device and / or in the settings.

Resolution Support up to 720p/1080i/1080p | Suitable for connecting HDMI to VGA devices like PC Monitor, Projector or TV | Flexible Design | No External Power Supply Needed, Just Plug and Play

This is an extension cable for Industrial camera power supply I/O Trigger and data transmit. Fit for Basler GigE AVT industrial Camera, Sony industrial CCD Camera, and more industrial Machine Vision cameras with Hirose 6 pin Male Connector. | High super flexible shielded cable,oil-resistant flame-resistant torsion-resistant and heat-resistant. | Plug A: Right Angle Hirose 6 Pin Female Connector; Plug B: Right Angle Hirose 6 Pin Female Connector. | Cable Length: 5m/197inches (We can customize with other length, please contact us if you need). | Each cable we produce has been rigorously tested and is compatible with machines from a variety of major brand suppliers,We are committed to all the products are qualified and high-quality.

Made in USA. Adjustable Camera Wrist Strap compatible with Sony, Leica, Fujifilm, Olympus, Pentax, Hasselblad, Panasonic, Ricoh, Samsung, and all other small digital cameras weighs under 2 pounds. | Made from 9mm high strength climbing rope and premium thick microfiber leather, the camera grip wrist strap/hand strap is lightweight, fashionable, and durable. Two layers of microfiber leather connect to the split ring connector for extra wear resistance. | Soft and comfortable, the adjustable camera wrist strap fits for all wrist sizes of women or men with microfiber leather stopper to cinch the cuff strap in place and keeps your camera safe. The camera safety wrist strap gives you peace of mind and great comfort while you are holding the camera. | A quick release connector is included for quick and easy connection or disconnection, compatible with small strap eyelet on cameras like Fujifilm Mini 9 Mini 8 Mini 90 Mini 70 Wide 300 SQ20 SQ10 Instant cameras, Sony RX100 VII, Ricoh GRII/GR, Canon SX430 IS, Panasonic ZS200 point & shoot cameras. Available in 5 colors: red, black, red/blue/white, green/blue, orange/yellow/green. | Available climbing rope length: ~ 34cm/13.4in. Climbing rope diameter: ~ 9mm. Split ring connector: ~ 15mm. Weight: ~ 20g/0.6oz. Content: 1x Camera Wrist Strap with Microfiber Leather Pad, 1x QD Loop.

This is an extension cable for Industrial camera power supply I/O Trigger and data transmit. Fit for Basler GigE AVT industrial Camera, Sony industrial CCD Camera, and more industrial Machine Vision cameras with Hirose 6 pin Male Connector. | High super flexible shielded cable,oil-resistant flame-resistant torsion-resistant and heat-resistant. | Plug A: Hirose 6 Pin Female Connector; Plug B: Hirose 6 Pin Female Connector. | Cable Length: 5m/197inches (We can customize with other length, please contact us if you need). | Each cable we produce has been rigorously tested and is compatible with machines from a variety of major brand suppliers,We are committed to all the products are qualified and high-quality.

Made in USA. Adjustable Camera Wrist Strap compatible with Sony, Leica, Fujifilm, Olympus, Pentax, Hasselblad, Panasonic, Ricoh, Samsung, and all other small digital cameras weighs under 2 pounds. | Made from 9mm high strength climbing rope and premium thick microfiber leather, the camera grip wrist strap/hand strap is lightweight, fashionable, and durable. Two layers of microfiber leather connect to the split ring connector for extra wear resistance. | Soft and comfortable, the adjustable camera wrist strap fits for all wrist sizes of women or men with microfiber leather stopper to cinch the cuff strap in place and keeps your camera safe. The camera safety wrist strap gives you peace of mind and great comfort while you are holding the camera. | A quick release connector is included for quick and easy connection or disconnection, compatible with small strap eyelet on cameras like Fujifilm Mini 9 Mini 8 Mini 90 Mini 70 Wide 300 SQ20 SQ10 Instant cameras, Sony RX100 VII, Ricoh GRII/GR, EOS SX430 IS, Panasonic ZS200 point & shoot cameras. Available in 5 colors: red, black, red/blue/white, green/blue, orange/yellow/green. | Available climbing rope length: ~ 34cm/13.4in. Climbing rope diameter: ~ 9mm. Split ring connector: ~ 15mm. Weight: ~ 20g/0.6oz. Content: 1x Camera Wrist Strap with Microfiber Leather Pad, 1x QD Loop.

Made in USA. Adjustable Camera Wrist Strap compatible with Sony, Leica, Fujifilm, Olympus, Pentax, Hasselblad, Panasonic, Ricoh, Samsung, and all other small digital cameras weighs under 2 pounds. | Made from 9mm high strength climbing rope and premium thick microfiber leather, the camera grip wrist strap/hand strap is lightweight, fashionable, and durable. Two layers of microfiber leather connect to the split ring connector for extra wear resistance. | Soft and comfortable, the adjustable camera wrist strap fits for all wrist sizes of women or men with microfiber leather stopper to cinch the cuff strap in place and keeps your camera safe. The camera safety wrist strap gives you peace of mind and great comfort while you are holding the camera. | A quick release connector is included for quick and easy connection or disconnection, compatible with small strap eyelet on cameras like Fujifilm Mini 9 Mini 8 Mini 90 Mini 70 Wide 300 SQ20 SQ10 Instant cameras, Sony RX100 VII, Ricoh GRII/GR, Canon SX430 IS, Panasonic ZS200 point & shoot cameras. Available in 5 colors: red, black, red/blue/white, green/blue, orange/yellow/green. | Available climbing rope length: ~ 34cm/13.4in. Climbing rope diameter: ~ 9mm. Split ring connector: ~ 15mm. Weight: ~ 20g/0.6oz. Content: 1x Camera Wrist Strap with Microfiber Leather Pad, 1x QD Loop.

Updated Version : This is updated version Camera Cage for Canon EOS RP.Fit Perfectly on your Camera. | First-class Manufacture : Precision CNC machined from top quality solid aircraft-grade aluminium,smooth surface and scratch resistant. | Splendid Design : With the Camera Cage,you can also install or remove your battery easily.Quick release,turn and remount to your camera for either a horizontal or vertical shot. | Stong Compablity : Completely Arca-swiss RRS Berno KIRK Sirui compatible.Black anodized treatment for high durability. Connection screws made of stainless steel. | Mounting Points : All the needed allen wrench with be Attached.

Mount a NVMe 2.5-inch U.2 Small Form Factor (SFF) onto a PCI Express Add-in card and install on a PCIe x4 slot. No cables are required. | The adapter is a PCI Express 4.0 4-lane Host adapter. Supports PCIe 4.0 and PCIe 3.0 motherboard. Support PCIe L1 Power Management Substates with CLKREQ. | No driver installation required. Support Windows 11/10/8 and later; Server 2016/2012 R2 and later; Linux, etc. | Fully RoHS compliant. Made in Taiwan. | SFF-8639 PCIe Adapter / U.2 PCIe Card / PCIe SSD / U.2 SSD PCIe Adapter / NVMe PCIe Adapter / PCIe NVMe SSD Adapter / U.2 SSD Internal Drive

Replace a scratched or malfunctioning trackpad that compatible with MacBook Pro 16" 2019 model A2141 (EMC 3347) | Replacement trackpad ensures smooth operation when moving cursor and clicking on all points of the trackpad. | We offer a kit with the trackpad "Space Gray" and trackpad flex cable 821-02250-A together for your convenience. | Compatible with MacBook Pro 16" A2141 2019 : MacBookPro16,1 Scissor Keyboard 2019: MVVL2LL/A,MVVJ2LL/A,MVVM2LL/A,MVVK2LL/A or BTO | Restore the touch sensitivity of your laptop with this part . | Our trackpads are individually tested and guaranteed to function perfectly

Wireless Connectivity: Zigbee-enabled door and window sensor connects wirelessly to your smart home hub for seamless integration. | Compact Design: Slim and discreet sensor easily mounts on doors, windows, cabinets, or other entry points. | Motion Detection: Sensor detects when doors/windows are opened or closed, instantly notifying your smart home system. | Voice Control: Compatible with Alexa and Google Assistant for convenient voice commands and status updates. | Low Maintenance: Long-lasting battery ensures reliable operation with minimal upkeep required.

【Compatible with】Sony ZV-1F,ZV-1,RX100 VII,RX0 II,ZV-E1,A1,A7C,A7 IV,A7 III,A7 III A,A9 II,A9,A7R V,A7R IV,A7R III,A7S III,ZV-E10,A6600,A6400,A6100,ILME-FX3; Canon R8,R50,R3,R5C,R5,R6,RP,R,Ra,R7,R10,M200,M6 Mark II,M50 Mark II,M50,6D Mark II,77D,90D,200D,200D II,800D,850D,G7X3,G5X2,SX70 HS; Nikon Z,Z7 II,Z6 II,Z fc,Z50,Z30,COOLPIX A1000,P1000,P950,B600.Note:Please confirm your camera model before purchase.Nikon Z,Z7 II,Z6 II,Z fc,Z50,Z30 must update firmware to Ver.1.40 or higher. | 【49ft Remote Control】The Detachable Remote has fast connecting speed and low energy cost; offer you a long time use. It allows you to snap photos or start/stop video recording up to 49ft away. Which can seamlessly connect to your camera, providing a reliable and stable connection. Built-in battery that's easily rechargeable using the Type-C cable. It can use for about 8 hours after fully charged. When not in use, the remote control can be inserted into a dedicated slot on the tripod to keep it. | 【Upgraded Stable Tripod】With its built-in umbrella-shaped tripod structure, silicone non-slip foot pad design makes the grip more firm. It can be transformed into a desktop tripod in just 1 second, legs fully opened for 5.2in tall. With the combination of 180°vertical adjustment and 360° horizontal rotation, you can effortlessly find your optimal angle, capturing vast landscapes or capturing cherished moments. Moreover, you can fix the camera or other device with the 1/4 adaptor screw easily. | 【Stable & Lightweight】Our Newmowa camera remote shooting tripod is designed to be sleek and lightweight. With a small size of 6.8 inch and lightweight of 0.3 lb, this remote tripod can easily fit into any handbag or backpack. It's incredibly lightweight and portable design, making it a perfect companion for travel, daily life, and outdoor activities. Whenever you want to record a beautiful moment, it always be there. It's also an ideal gift choice for your loved ones, leaving precious memories. | 【Widely Application】This camera grip tripod is foldable, and easily free to switch between handheld mode and tripod stand mode. Which can satisfy all the needs of vertical, horizontal, low-angle shot, high angle shot, etc. Suitable for photographing events and video recordings such as selfies, family portrait photos, party, traveling, hiking, snowboarding, camping, and for shooting YouTube, Facebook, vlog, live streaming, sports events, yoga videos, and other activities indoors and outdoors.

1. The lens collar is made according to the shape and structure design of the lens, installed near the mount; | 2. The contact surface between the inner wall of the tripod ring and the lens is PVC film to reduce wear; | 3. When installing, loosen the knob, align the convex point of the lens with the groove of the ring body, push down gently, and lock it moderately; | 4. The tripod collar bottom is added 55mm long Arca fit quick release plate feature, can be used with 39mm Arca-Swiss fit tripod head and clamp directly, more practical than lens collars without QR-Plate; also reserved 1/4" and 3/8" screw holes and stainless-steel anti-slip screws for fixing lens to tripod directly； | 5. The tripod ring is made of Aviation Aluminum, CNC precisely machined, hollow-out weight reduction design, polished and surface anodized finish. The appearance and exquisite workmanship are much better than similar products made by mold.

2G DDR3 64 bits-Geforce GT 610 is based on GF119 core architecture, has max 1000 MHz memory speed. It does not require any additional power connector, its power draw is 20 W. | HDMI and VGA-The graphics card with stainless steel full height bracket, has 2 ports. HDMI supports 2560 x 1600 pixel displays. VGA supports 2048x1536 | Single Slot-The video card is ITX design for desktop mainstream tower cases, it‘s low profile comes with half height bracket, supports small form factor pc. | High Quality-SAPLOS using new PCB and electronic components instead of recycling of old materials. | Low-end Video Cards-It's a good value option for you on a budget that light up your old computer and replace the onboard graphics card.

This 8K USB-C Bi-Direction switch can be used as a 2 in 1 out switcher for connecting two sources with USB-C interface to one interface monitor, or as a 1 in 2 out splitter for connecting one source with USB-C interface to switch between two monitors. (Please note that the two monitors can't work at the same time). | Supporting 8K@60Hz,4K@120Hz,1080P@240Hz resolution and providing you with a transmission rate of up to 48Gbps, this Type-C switcher ensures a clear and vibrant display with no graininess in close proximity, and truly zooms in and out without distortion for a perfect presentation. | The USB C switcher selector uses a one-touch switching button "select" to quickly switch the signal source to another device, eliminating the need to unplug frequently and effectively protecting the computer interface. There is an indicator light next to the USB-C port, which lights up red so you know which device is working. | Easy to install, USB C switch does not require drivers, plug and play. Requires connection to an external 5v power supply, make sure you use the supplied USB-C cable to power the switcher when in use. | Suitable for PC tablets, telephones, game consoles, TVs, projectors, monitors, etc. with USB C ports

1. Quick release plate compatible with Manfrotto MVH400 series, MVH500 series, MVH600 series, MVH700 series tripod heads; and compatible with Sachtler FSB4/6/8, ACE series, FSB6T/8T/10T, DV 3+3/5+5 series fluid head; | 2. Lens collar foot compatible with Canon lenses include: RF 400mm f/2.8L IS USM, RF 600mm f/4L IS USM, RF 800mm f/5.6L IS USM, EF 400mm f/2.8L IS III USM, EF 600mm f/4L IS III USM; | 3. 1) The replacement foot is about 60mm long x 38mm wide x 48mm high, and the top adopts the original standard; 2) the middle quick release plate is about 160mm long x 50mm wide x 12mm wide, reserved 18 screw holes, scales on the front, two-way design on the back; 3) the small plate at the bottom is about 62mm long x 45mm wide x 8mm thick; | 4. The net weight of this combo with screws is about 285g, and the measured volume is about 160mm long x 50mm wide x 66mm high, including three parts; | 5. The tripod ring is made of Aviation Aluminum, CNC precisely machined, hollow-out weight reduction design, polished and surface anodized finish. The appearance and exquisite workmanship are much better than similar products made by mold.

AI Noise Cancellation & Instant Mute: Wireless headset with mic for work features advanced ENC(Environmental Noise Cancellation) technology,calculating the frequency band of ambient noise in advance prevents listeners from hearing your background noise, ensuring every call is clearer and perfect for working from home/office.Our wireless headset has a one-touch mute function,allowing you to easily manage calls,protect privacy, and make every interaction ease | Dual Connection & True Wireless Freedom: Wantek wireless headset can simultaneously connect to computer and cell phone or other bluetooth devices, then you can easily seamlessly switch between video conferences and phone calls.Its wireless working range is up to 49ft/15m, so you can move freely during calls or video meetings, experience true wireless freedom | Two Connection Ways & Wide Compatibility:The work headset is equipped with bluetooth and USB Dongle, even if your computer doesn't have Bluetooth, just connect it with the included USB dongle to enjoy a stable, lag-free audio experience.the headset compatible with popular software such as Skype,Zoom,Teams,Webex,GoToMeeting and Google Meet which meets diverse calling and working needs across different platforms.Ideal for online courses and meetings | Long Battery Life & All Day Comfort: Our wireless headset comes with a strong 500mAh battery, providing an impressive 50 hours of use after a full charge.enjoy long periods of use without needing to recharge often.It only takes 2 hours to fully charge the battery,charge 30 mins for 12 hrs play. colour balck & grey of this bluetooth headphones features with swivel oval ear cups & soft leatherette cushions that fits for all-day use and most people | High Fidelity & Warranty: This computer headset with microphone delivers rich, high-quality audio by 40mm NdFeB Speaker unit for immersive listening experience, surround stereo sound making it ideal work,882-BT Work headset with mic suitable for Home, office, business, classrooms, telework,conference call,video call chatting. Wantek guarantee 12-MONTH Warranty and 24/7 online service, please feel free to contact us

LGA 1150, 3.4GHz | Core i3-4130, Dual-Core | Power: 54W | Heatsink and Fan included | Cache: 3MB

1, Higher sync speed than the first generation --- The highest flash sync speed up to 1/320 second (some of models may only reach to 1/250s or less, difference combination of models of flash and camera using may achieved difference flash sync speed). | 2, Adding the Locking rings | 3, Improved Flash / Shutter control Buttons | 4, Working for more non Canon/Nikon cameras and single firing pin cameras --- ALL Standard Hot shoe DSLR Camera except Sony and Minolta. | 5, Adding the power switch for single transmitter --- Set the power switch on TX (single transmit) or TRX (transmit-receive automatic switch) state according to different shooting requirement. When it used as wireless triggering transmitter and flash testing, set to "TX"; When it used as wireless triggering receiver, using shutter release or other extended functions, set to "TRX". set to OFF means turn off the power.

Fully functioning, brand new and durable replacement remote control, works out of packaging | Well responsive to every key press, ensuring the projector operates as expected without any hassles | A perfect replacement to your old or lost remote control; less cost with solid quality and better usage experience | Requires 2 AAA batteries (NOT Included); For use with BenQ DW921, DX920, L6000, LK952, LK953ST, LK990, LU950, LU951, LU951ST, SU922+, SW921+, SX920+ projectors | Warranty as long as 12 months (From Date of Purchase); Professional and nice customer service: messages will be replied by well-trained support team within 24 hours

This Certified Refurbished product is tested and certified to look and work like new. The refurbishing process includes functionality testing, basic cleaning, inspection, and repackaging. The product ships with all relevant accessories, a minimum 90-day warranty, and may arrive in a generic box. Only select sellers who maintain a high performance bar may offer Certified Refurbished products on Amazon.com | 802.11ac wave 2 support | High-density experience | Multiuser multiple-input multiple-output (MU-MIMO) technology | Multigigabit Ethernet support

1, Higher sync speed than the first generation --- The highest flash sync speed up to 1/320 second (some of models may only reach to 1/250s or less, difference combination of models of flash and camera using may achieved difference flash sync speed). | 2, Adding the Locking rings | 3, Improved Flash / Shutter control Buttons | 4, Working for more non Canon/Nikon cameras and single firing pin cameras --- ALL Standard Hot shoe DSLR Camera except Sony and Minolta. | 5, Adding the power switch for single transmitter --- Set the power switch on TX (single transmit) or TRX (transmit-receive automatic switch) state according to different shooting requirement. When it used as wireless triggering transmitter and flash testing, set to "TX"; When it used as wireless triggering receiver, using shutter release or other extended functions, set to "TRX". set to OFF means turn off the power.

PROAIM SnapRig End Jaw Vise Grip/Clamp with 5/8” Baby Pin is a heavy-duty rigging clamp with a Clamping range of up to 2 inches | Suitable for mounting photography, video, stage & lighting accessories such as Reflectors, Softboxes, Lights, Umbrellas, grip heads, etc | Made up of High-Grade CNC Aluminum & offers an impressive payload of up to 20kg/44lb | It has a baby pin & a standard 3/8 "-16 mount | 100% customer satisfaction guarantee; Buy with confidence

only Celsius temperature display | ARC452A12 ARC452A13 ARC452A14 | ARC452A16 ARC452A17 ARC452A18 | ARC452A19 ARC452A20 ARC452A21

Black Knurled Filter Mount for Better Grip | MRC Coating to Control Flare & Ghosting | New QR Code included to Verify Authenticity | Good for down to 24mm Full Frame Format | ECO-Friendly Packaging

Data Rate: 1.25Gb/s | Wavelength: 1310-nm | Reach: up to 10 km; Fiber Type: Dual LC single-mode fiber | Compatible with Cisco GLC-LH-SMD/GLC-LH-SM/SFP-GE-L, Meraki MA-SFP-1GB-LX10, Ubiquiti UF-SM-1G, Mikrotik, Fortinet, TP-Link TL-SM311LS

GOBE IS NOW URTH | We changed our name to better reflect what we’re working to protect. To find the equivalent Urth product, search code B088C2JN3N | SUPERB ANTI-REFLECTION | Cuts out 99.9% of polarised light for better contrast and colour balance. Adjust the level of polarisation by rotating rim. | GOBE 3PEAK | Made with premium German SCHOTT B270 optical glass for supreme clarity. Suited for professional lenses and all telephoto lenses. | 16 LAYER NANO COATING | Provides neutral colour balance, reduces lens flare, removes ghosting, and protects against scratches, dirt, and grime. Backed by our lifetime warranty. | NO VIGNETTING | Consciously designed durable magnalium rims are double-threaded for stacking and slim profile to avoid vignetting.

Designed To Fit An Slur Camera With Standard Zoom Lens Attached | Internal Zippered Pocket Stores Memory Cards, Filter Or Lens Cloth | Side Zippered Pockets Store An Extra Battery, Cables, Lens Cap Or Small Accessories | Lid Unzips To Create A Wide Opening For Easy, Quick Access To The Grip Of Camera | Padded Base | Size 8.4 x 5.5 x 8 in | Fits devices 5.7 x 4.6 x 6.25 in | Designed to fit an SLR camera with standard zoom lens attached | Lid unzips to create a wide opening for easy, quick access to the grip of your camera | Internal zippered pocket stores memory cards, filter or lens cloth | Side zippered pockets store an extra battery, cables, lens cap, or small accessories | Integrated belt loop, padded handles and removable shoulder strap offer multiple carrying options. Padded base protects your camera and lens

Adding the locking rings | Max sync speed: 1/320 second | 3.100m transmission distance with 16 channels | Type: FSK 2.4GHz wireless remote control system | Shutter release: half-press, full-press, takes 7 - 15 days to deliver

Package Dimensions: 3.175 cms (L) x 3.175 cms (W) x 57.785 cms (H) | Package Quantity: 1 | Product Type: Camera Tripod | Country Of Origin: Italy

ND filters are especially useful when shooting in bright sunlight conditions or a highly reflective water surface. | Reduce the light volume without any changes in hue | Each filter uses a specially developed ultra-low reflection coating to minimize internal reflection off the cameras built-in CCD and CMOS Sensors.