The LH-VM12 Square Metal Lens Hood is designed for Voigtlander 35mm f2 ULTRON Aspherical Vintage Line VM Lens. | This bayonet-mount lens hood shades the lens from stray light, prevent or limit lens flare, improving your contrast and image quality. | Replace Voigtlander LH-12 | Note: It can't be used for Voigtlander 21mm f3.5 Color Skopar Aspherical VM Lens | Note: It can't be used for Voigtlander 35mm f2.5 Color Skopar Pancake II VM Lens

FAST AND EASY INSTALLATION WITH NO PERMANENT VEHICLE MODIFICATION: Enjoy a true plug & play installation process as this dash cam power adapter plugs directly into your rearview mirror wiring, leaving no permanent modifications to your vehicle and keeping your dash cam installation completely hidden behind your rearview mirror. | COMPATIBLE DASH CAMS: This Dongar dash cam adapter is compatible with USB-powered dash cams including: Garmin Mini 2, Garmin Live, Garmin 47, Garmin 57, Garmin 67W, Vantrue N2 Pro, Vantrue N4, Vantrue N5, Fitcam, Viofo, 70Mai, and all other USB-powered dash cams. | COMPATIBLE ACCESSORIES: This Dongar rearview mirror adapter is also compatible with other USB-powered devices including radar detectors and GPS. | OPTIMAL PERFORMANCE: This dash cam adapter is recommended for USB-powered devices drawing less than 2A at 5V to ensure efficient heat management. If you're using a USB-C powered device, please ensure compatibility by checking the voltage specifications beforehand. | COMPATIBILITY LIMITATIONS: Please note that this adapter is not compatible with devices requiring 12V or those powered by a barrel jack or RJ11 connector. | COMPATIBLE VEHICLES: Examples of compatible vehicles for this rearview mirror dash cam include: Toyota Tacoma (2024+), BZ4X (2024+), Land Cruiser (2024+), 4Runner (2020+), RAV4 (various trims, 2016-2021), select Prius (2022+), and more. More information is available on the compatibility chart below. Please verify compatibility before placing an order - if you are unsure of your vehicle’s compatibility please contact Dongar support. | EXTENDED COMPATIBILITY: This adapter may also be compatible with additional vehicles with 10-pin rearview mirror connectors. If your vehicle model isn't listed, please verify compatibility by contacting Dongar support for assistance. | AUTO-DIMMING REQUIREMENT: This Dongar dash cam adapter requires an auto-dimming or powered rearview mirror (such as a mirror with garage buttons) to function. | IGNITION-ACTIVATED POWER: This adapter powers your dash cam or other USB-powered device when your vehicle's ignition is ON - it is not intended for parking mode or other constant power applications. By turning on only when your vehicle is on, it eliminates any danger of draining your car’s battery. | COMPLETE KIT: The Dongar Technologies kit includes one (1) dash cam power adapter, along with three (3) shorty USB cables (USB-C, Mini USB, Micro USB) for use with USB-powered devices. Additionally, a plastic pry tool is provided to assist with installation.

FAST AND EASY INSTALLATION WITH NO PERMANENT VEHICLE MODIFICATION: Enjoy a true plug & play installation process as this dash cam power adapter plugs directly into your rearview mirror wiring, leaving no permanent modifications to your vehicle and keeping your dash cam installation completely hidden behind your rearview mirror. | COMPATIBLE DASH CAMS: This Dongar dash cam adapter is compatible with USB-powered dash cams including: Garmin Mini 2, Garmin Live, Garmin 47, Garmin 57, Garmin 67W, Vantrue N2 Pro, Vantrue N4, Vantrue N5, Fitcam, Viofo, 70Mai, and all other USB-powered dash cams. | COMPATIBLE ACCESSORIES: This Dongar rearview mirror adapter is also compatible with other USB-powered devices including radar detectors and GPS. | OPTIMAL PERFORMANCE: This dash cam adapter is recommended for USB-powered devices drawing less than 2A at 5V to ensure efficient heat management. If you're using a USB-C powered device, please ensure compatibility by checking the voltage specifications beforehand. | COMPATIBILITY LIMITATIONS: Please note that this adapter is not compatible with devices requiring 12V or those powered by a barrel jack or RJ11 connector. | COMPATIBLE VEHICLES: Examples of compatible vehicles for this rearview mirror dash cam include: Hyundai Tuscon and Sonata (various trims, 2016-2022), Kia Sorrento (various trims, 2016-2022), Kia Telluride (various trims, 2018-2022), Kia Sedona (various trims, 2015-2021), and more. More information is available on the compatibility chart below. Please verify compatibility before placing an order - if you are unsure of your vehicle’s compatibility please contact Dongar support. | EXTENDED COMPATIBILITY: This adapter may also be compatible with additional vehicles with 10-pin rearview mirror connectors. If your vehicle model isn't listed, please verify compatibility by contacting Dongar support for assistance. | AUTO-DIMMING REQUIREMENT: This Dongar dash cam adapter requires an auto-dimming or powered rearview mirror (such as a mirror with garage buttons) to function. Not compatible with digital mirrors. | IGNITION-ACTIVATED POWER: This adapter powers your dash cam or other USB-powered device when your vehicle's ignition is ON - it is not intended for parking mode or other constant power applications. By turning on only when your vehicle is on, it eliminates any danger of draining your car’s battery. | COMPLETE KIT: The Dongar Technologies kit includes one (1) dash cam power adapter, along with three (3) shorty USB cables (USB-C, Mini USB, Micro USB) for use with USB-powered devices. Additionally, a plastic pry tool is provided to assist with installation.

Brand:Yamaichi | IC51-0324-453 | PLCC Package | 1.27mm Picth | PLCC32

SMI 2263XT Series Controller; 2280 M.2 PCIe Gen3 x 4, NVMe 1.3 | Built in end-to-end data path protection, SmartECC technology, and Thermal throttling technology | Supports LDPC (Low Density Parity Check) to correct error during read to ensure data integrity and NANDXtend ECC technology to extend the lifespan of NAND Flash | SEQ Performance Read up to 1,600MB/s, Write up to 600MB/s; 4K Aligned Random Write: up to 260K IOPs | 5 Year Warranty; O/S Supported: Windows 7*/8.0*/8.1/10/11

8 Channels Range to 200m - AODELAN Wireless Flash Trigger Set used 2.4 GHz Frequency, 8 channels, communication range up to 650' / 200m, max flash sync speed of up to 1/250s. | Working for all most Speedlite and Cameras - Compatible with all most flash Units with Universal Hot Shoe (except Sony flashes) and cameras with 3.5mm port. Such as for Canon, Nikon, Yongnuo, Godox, Panasonic, Olympus, Pentax and FUJIFILM speedlite and cameras. | Transmitter can rotating 90° low adjustment - The transmitter's tilting joint allows it to be mounted vertically or horizontally onto your camera's hot shoe. | Wired and Wireless Remote Shutter- Wired and wireless shutter release functions. An included 3.5 to 3.5mm sync cable connects the trigger to a studio flash. A 3.5mm to PC plug adapter is also included for flashes with a 1/4" mono plug socket. | Internal antenna and LED indicators, easy to set.

【Free up phone and iPad memory space immediately】: If your Phone or iPad has almost used up all the memory space, this phone usb storage flash drive can help alleviate 512GB of storage space. Whether you like to shoot short videos or take selfies, our phone memory stick are perfect for you. You don't have to pay extra for additional storage space, just plug in the external storage space of your phone. Enjoy the extra space (512GB) of the phone flash drive. | 【Securing Personal Files】: The phone photo transfer stick provides a separate password function to encrypt the file information in the app. You can set a password to effectively protect your private files and protect the whole storage or selected parts. In this way, you can use the phone thumb drive with confidence and enjoy a more comfortable and secure file storage experience. | 【One-click backup】: Back up your files, photos, videos and Phone book with just one click. Our phone photo stick is easy to use and comes with an APP that allows you to back up your data quickly and easily. Our phone usb flash drive supports sharing photos to social media such as: Facebook, Twitter, etc., and you can even take photos or videos on our jump drive and save them directly to the zip drive. With 512GB of storage space, you'll have more space and time to do what you love. | 【High transfer speed】: Transfer photos, videos, and files in seconds with our USB stick. With a write speed of up to 20 MB/s and a read speed of up to 25 MB/s, our flash drive for phone have higher performance than conventional usb storage flash drive. Save time and get more done with phone photo storage stick. (Tip: phone/iPad needs to download "EASYFLASH PRO" APP from APP Store when using memory stick; Android phone/PC no need to download APP). | 【High compatibility】: Our thumb drive is designed for use with a wide range of devices, including Phone 15, 15 Plus, 15 Pro, 15 Pro Max, Phone 14, 14 Pro, 14 Pro Max, 14 Plus, Phone 13, 13 Pro max, 13 Pro, 13 mini, 12 Pro max, 12 Pro, 12, 12 mini, 11 Pro max, 11 Pro, 11, XS MAX, XS, XR, X, 8, 7, 6, 6s, 5s (System Version 8.2 Or higher). The photo stick supports Android smartphones (Need to open OTG function). Our USB storage drives also support computers and other devices with USB ports.

【For That Perfect Cinematic Scene】 It suppresses highlight and shadow contrast with fine black diffusing material, providing like a cinematic photos. | 【1/2 of the Kenko Black Mist No.1 N filter diffusing effect】 The slightly weaker Black Mist diffusion effect allows you to capture cinematic scenes. | Suitable for nightscapes, backlighting, portraits, etc. | Water & Oil Proof Coating makes a daily filter maintainance easy. / Filter diameter: φ62mm / Made in Japan | 【About Kenko】 Kenko is a Japanese brand of photographic and imaging supplies and optical products with a history of over 65 years. With our strict quality control and diverse product lineup, Kenko support you enrich your daily life!

Condition: Brand new, Color: Black, Layout: US Layout. With backlit. | Compatible Models: for ASUS ROG Strix G15 G513 G513Q G513QY G513QM G533. | P/N: 0KBR0-4810US00. | High Quality Replacement Laptop Keyboard. | Please check our image to your original keyboard before ordering it to avoid buying wrong model.

The LH-S24B Square Metal Lens Hood is designed for Sony FE 24mm F1.4 GM Lens. | The main body of the lens hood is made of high quality aluminum alloy, and the bayonet is made of synthetic resin, which will not damage your lens. | Compatible with Lens: Sony FE 24mm/F1.4 GM Lens ( SEL24F14GM )

【3-11 Stops Light Reduction Effect】Variable ND filter enables slow shutter speeds to be used to record movement in subjects such as waterfalls, providing a silky smooth effect to flowing water. Recommends its use in sunrise and sunset shooting. | 【Imported AGC Optical Glass】Made by import AGC optical glass, rotating between ND8 to ND2000, adjustable from 3/4/5/6/7/8/9/10/11 stops, reduces the amount of enter light without affecting color balance and no color cast. | 【24 Multi-Layer Coatings】Both sides of the glass with nanometer coatings help repel water and dust, durable enough. | 【Ultra Slim Frame】The filter frame is only 7.4mm, super lightweight CNC- nonslip frame helps install and remove the filter quickly. | 【Note】This size ND filter is compatible with all 58mm lenses. Please verify your camera's lens thread size before ordering. This number is beside a "ø" (diameter) symbol. | New and old packages are sent randomly

【Ergonomic Design】Nitze PA29D camera side handle is made of aluminum alloy and covered with rubber for non-slip and durability. Ergonomic design provides you a good handheld feeling during long-term shooting. | 【Detachable Locating Pins】The Locating pins of the side handle can be removed with the included hex spanner to change the orientation or become a 1/4" screw. | 【For Left or Right Hand】The connecting section can be mounted to both sides by two M4 Screws. You can use it as a left side handle or right side handle. | 【Up and Down Adjustable】The height of the connection part can be adjusted. | 【Mounting Points】One built-in cold shoe, six 1/4” threaded holes and one 3/8” ARRI locating holes on the top of the side handle for accessories expansion. The strap slots can be used to mount Nitze N58-R2 hand strap.

JJC AET-CRFII Automatic Extension Tube has Metal Bayonet Mount, Gilt Metal Contacts | 2 extension tubes (16mm & 11mm) Can be used Individually or in Combination (27mm) | Retains Auto Focus and Exposure Capability, will not degrade the quality of your lenses | Made of ABS+ Brass. Weights 168 Grams. Package Includes: 11mm Automatic Extension Tube x 1, 16mm Automatic Extension Tube x 1, Body Cap x 1, Rear Lens Cap x 1, Storage Pouch x 1 | Canon RF Mount Macro Photography Tube, Closeup portrait tube, fits Canon Mirrorless Camera EOS R / R5/ / R6 / Ra / RP

Compatible with Lens: Carl Zeiss Biogon T* 2/35 35mm f2 ZM Lens (Leica M Mount) | Compatible with Lens: Carl Zeiss C Biogon T* 2.8/35 35mm f2.8 ZM Lens (Leica M Mount) | Compatible with Lens: Carl Zeiss Planar T* 2/50 50mm f2 ZM Lens (Leica M Mount) | Compatible with Lens: Voigtlander NOKTON CLASSIC 35mm f1.4 VM and NOKTON CLASSIC 35mm f1.4 VM II Lens (Leica M Mount) | Compatible with Lens: Voigtlander NOKTON CLASSIC 40mm f1.4 VM Lens (Leica M Mount)and Voigtlander NOKTON 50mm F1.5 Aspherical II VM Lens (Leica M Mount)

RICH JBL ORIGINAL PRO SOUND: JBL Pro Sound delivers surprisingly rich audio and punchy bass from Clip 4’s compact size. | UPGRADED INTEGRATED CARABINER: With a redesigned carabiner that’s integrated into the speaker itself for extra protection, take your JBL Clip 4 anywhere and everywhere. | IP67 WATERPROOF & DUSTPROOF: To the pool. To the park. JBL Clip 4 is IP67 waterproof and dustproof, so you can bring your speaker anywhere. | WIRELESS BLUETOOTH STREAMING: Wirelessly stream music from your phone, tablet, or any other Bluetooth-enabled device.

【Rubberized Aluminum Alloy Handle】Nitze PA29C side handle with NATO clamp is made of aluminum alloy and covered with rubber for more comfortable grip and durability. It can be mounted to camera or monitor cages. | 【Ergonomic Design】Ergonomic design handle is comfortable to hold, and it is not easy to get tired for long-term shooting. | 【For Left or Right Hand】The NATO clamp connecting section can be mounted to both sides by two M4 Screws. You can use it as a left side handle or right side handle. | 【Up and Down Adjustable】The height of the connection part can be adjusted within 28 mm. | 【Mounting Points】One built-in cold shoe, six 1/4” threaded holes and one 3/8” ARRI locating holes on the top of the side handle for accessories expansion. The strap slots can be used to mount Nitze N58-R2 hand strap.

Only for CoolBots sold after September 2011 | These sensors have plug jacks (like for earphones) | They plug into the BOTTOM of the CoolBot | Don't choose this if your coolbot sensor goes through the TOP of you coolbot | This is a replacement wire for either the ROOM sensor *OR* the FINS Sensor

【Parameters】For iPad Pro 12.9 2021 5th A2379, A2461, A2462 digitizer screen replacement black (No including LCD&Display), please confirm your phone model before purchasing. | 【Quality Guarantee】All our products are strictly QC tested before shipment, 100% intact. Make sure there are no scratches, no dead zones, no dot pixels or lines on the screen. High color saturation, high resolution, wide color gamut and smooth hand feel. | 【Application】Used to replace the defective touch screen digitizer for iPad Pro 12.9 2021. Examples include incorrect screen response and digitizer issues. | 【Installation and Service】 Please test the screen before installation to ensure the normal use of the screen. Non-professional installation is not recommended. If you need help, please contact us and we will get back to you within 24 hours. (The screen does not include the LCD, frame, power buttons, volume buttons or other buttons. Please remove them from old screen, and then re-install.) | 【With Repair Tools】A set of free repair tools, tape. (Our repaire tools is universal, you may also need other tools to repair the device if you want more professional.)

Kase Streak Blue Filter is an amazing filter for filmmakers creating cinematic blue flares. | Anamorphic lens creates a vintage style horizontal flare to your footage While normal DSLR lenses can not make this happen. Installing a Kase streak blue filter in front of your lens could create the same flare as the anamorphic lens. | Kase Streak Blue Filter creates a blue streak flare on images, emulating the look of the type of lens flare produced by anamorphic cinema lenses. | The angle of the flare can be easily positioned by rotating the filter. | NOTE:This Filter is compatible with all 67mm lenses. Please verify your camera's lens thread size(usually marked somewhere on the lens barrel or printed underneath the lens cap) before ordering. The number is always preceded by a "ø" (diameter) symbol.

【Compatibility】Raspberry Pi 5 UPS HAT compatible with Raspberry Pi 5 8GB/4GB/2GB/1GB; Model: X1200 | 【Function】X1200 provides max 5.1V 5000mA Power Backup, intelligent and safe power management like auto power on, safe shutdown, power loss and power adapter failure detection | 【How to Power】Power via X1200 USB-C port: 5Vdc 5A via USB Type-C; (Refer to Geekworm PD27W power adapter ASIN: B0CP7WPZZY) Do not apply power toRaspberry Pi 5 via the Type-C USB socket!!! | 【2-Cell Battery Supported】Battery length max 65.3mm, diameter max 18.5mm. (NOT include batteries, please prepare yourself!) | 【Versatile Design】X1200 is designed to be attached on bottom and don't use the 40-pin header, enabling easy stacking with other Raspberry Pi accessory boards. | 【Packing List】 1x X1200 5V UPS Shield, 1x M2.5 x 5mm screws(Not include Raspberry Pi 5, batteries or power adapter!) | 【User Manual】Refer to Geekworm WiKi and search X1200

[Function]X728 provides 5.1V 6000mA Power Backup, intelligent and safe power management, safe shutdown, auto power-on, full poweroff from software,Battery capacity reading, Low battery automatic shutdown, Buzzer alarm, RTC | [User Manual] Refer to Geekworm WiKi search X728; Match metal case for X728, refer to X728-C1(ASIN:B09Z6C64NN).PSU for X728, refer to ASIN: B09J856PND. | [How to Power & Specifications]Power supply via Type-C socket : 5Vdc ±5%, ≥3A, Via DC power jack : 5Vdc ±5%, ≥4A; UPS output : 5.1V ±5% Max 6A; UPS charging current: 2.3~3.2A; Terminal Battery Voltage : 4.24V; Recharge Threshold : 4.1V | [Important Note]√1. Do not apply power to your RPi via the Micro USB or USB Type-C socket. √2. Do not use 18650 battery with built-in protection circuit. √3.Please make sure the polarity of battery is "+" to "+" and "-" to "-" and match with the "+" "-" mark on battery holder!!! | [Application]X728 reserves the 40-pin header to stack with other Raspberry Pi accessory boards for enhanced applications. The X728 can also be used with the X825/X828/X829 (2.5" HDD/SSD Shield) and X857/X862/X872 (MSATA/M.2 SSD shield) for safe data backup. | Important note: the script must be installed first for the product to work properly!!! There maybe mixed version of X728 V2.3 and V2.5 at amazon warehouse, please understand.

Principle ： The Haida C-POL Filter helps to reduce reflections and glare by filtering out light that has become polarized due to reflection from a non-metallic surface. A polarizing filter arranges and filters this directionally polarized light perpendicularly to the reflected light, allowing for the absorption of much of light. This increase in the saturation of skies and foliage. | Material ：This filter is constructed from optical glass for clarity as well as color fidelity and features an aluminum-alloy filter ring that can be rotated in order to adjust the intensity of the polarization effect. | Coating ：To prevent internal ghosting and reflections, the glass includes layers of anti-reflection coating. These coatings also offer greater protection to the filter substrate and helps it to stay clean for longer than with uncoated filters. | Effect ：Circular polarizers are ideal for use with digital cameras and autofocus lenses，Clears up haze in distant landscapes and provides more saturated, vivid colors.Strongest effect when used at a 90° angle from the sun. | Other ：Top knurling to provide a more textured grip when mounting or removing it from a lens，If you have any questions about Haida products, you can contact us at any time.

A basic kit with Regular b;ack powder can be used with success on glass, counter tops, table tops, painted surfaces, cabinets and many other non-absorbent surfaces. Inclu | 1 regular latent powder, 1 oz. | 1 fiberglass fingerprint brush, extra soft | 1 set of fingerprint backing cards (25 sheets) | 1 lifting tape pad ( 25 sheets ) | 1 heavy-duty carry case

Modle: V3 | Transmission Rate: 10/100/1000Mbps | Hashrate: 74KH/s

Wireless Bluetooth Streaming | 5 hours of playtime | IPX7 waterproof | Speakerphone | Audio Cable Input

Compatible with :Canon 1300D 1500D 760D 750D 800D 700D 650D 600D 80D 70D 5DII 5DIII 5DIV 6D 7D etc Camera and Canon EF EF-S series Lens | The AF Extension Tube Set can transform your Lens into a Macro Lens. It moves the lens from the film or digital sensor. The closer the focus is, the greater the magnification | Configuration:Engineering plastics material + metal bayonet,seven kinds of combinations, seven kinds of magnifications,Perfect for macro shooting | Tube Lengths: (1) 12mm.(2) 20mm.(3)36mm, Macro extension tube can be used alone or in superimposed | When using the extension tubes alone (10mm or 20mm or 36mm ) or combination (10mm+20+36mm=66mm),support AF(Auto-Focus), AF Motor Protection: while using 3 rings together, we suggest you to use manual focus or Increase the lens focal lengths for it's a little bit difficult to auto-focus with 3 rings together, and also protecting your lens motor

1 regular latent powder, 1 oz. | 1 fiberglass fingerprint brush, extra soft | 1 set of fingerprint backing cards (25 sheets) | 1 lifting tape pad ( 25 sheets ) | 1 heavy-duty carry case

DG-C lens extender adapter is designed to work with Canon EF / EF-S series lens n DSLR Camera 5DII 5DIII 5DIV 6D 7D 70D 80D 600D 650D 700D 750D 760D 800D 1300D 1500D T7 T6i T5i | 68mm of tube diameter and designed with 3 tubes in different length: 12mm, 20mm, 36mm. They can be used individually or in 4 combinations to obtain different magnification (7 methods): 12mm, 20mm, 36mm, 12+20, 12+36, 20+36, 12+20+36 combination | Transform your Lens into a Macro Lens: a great tool to shoot at closer distance with higher magnification. With camera’s TTL (through-the-lens) and AE (automatic exposure), it gives perfect coupling except when combined with electronic flash AE unit | If the focal length is less than 70mm, it is not recommended to combine 2 or 3 rings at same time. It is easy to get AUTO FOCUS function when using single ring, while combine 2 or 3 rings, we suggest to set your camera in MANUAL FOCUS | High Quality: bayonets are made of metal with surface plating treatment, being smooth and durable; use gold-plated needle PIN to transmit signal, enhancing its stability and conductivity; elimination treatment of light reflection to inner surface

Essential for outdoor photography | Deepens intensity of blue skies and reduces or eliminates glare | Circular construction. 10-Year Warranty. | Universal filters compatible with DLSRs and lenses from Canon, Nikon, Sony, Panasonic, Olympus, Leica, Sigma, Rokinon, Tamron and all other major manufacturers. Check your lens for filter diameter.

Multifunctional: Diffusion dome kit comes with different adapters, easy to use with a variety of photography lights, no need to worry about compatibility issues. | Making Soft And Even Lighting: With soft diffuser lamp ball cover, you can easily make your photos more beautiful and stylish by making a soft and even lighting effect. | Suitable for a Variety of Photography Scenarios: Whether it's people photography, food photography or still life photography, the flash lighting diffuser ball can help you produce the ideal lighting effects. | Silicone Material: Flash diffusion dome is made of high grade silicone material for durability and waterproof performance, providing you with reliable photographic equipment. | Quick Installation and Removal: The simple design of the silicone flash diffuser ball makes installation and removal very easy, saving you time and effort.

Sold as 25/Pack. | Hub-printable DVD-R media offers a professional printable surface for use with CD/DVD inkjet printers (sold separately). DVD-R offers a 4.7GB capacity and a 16X write speed. | Printable surface delivers full-color, true-to-life photo results. Spindle to keep dust off and prevent scratches. | Customize each disk with crisp text and full color graphics along with reliable high-speed recording. 25 per pack. | This inkjet printable surface has excellent ink absorption for durable, long-lasting colors.

Perfect accessory to hold small items such as a mini flag or reflector | 3/8"-16 female thread inside a baby 5/8" (16mm) adapter on one side and an alligator clip on the other | Length 11.4" (29mm) | Can be placed in any baby receiver, any hex receiver, and can be screwed onto any 3/8"- 16 male thread | Limited two-year warranty

Fits easily and snugly around your lens hood in either the shooting position or reversed | Protects the front element of your lens from dirt, dust, moisture and impact | Reinforced removable front element protection disc | Compatable with existing LensCoat cover | Made in the USA

Original white "Fuji" film canisters with precise; very tight sealing lids. | Micro precision fitting lids allow pressure to build up inside the canister - commonly used for FILM CANISTER ROCKETS. | These durable canisters are also popular for first aid kits, science experiments, and geocaching containers. | INCLUDES 200 FILM CANISTERS. All film canisters are new.

100 high-grade non-rewritable DVD+R discs with a one hundred year archival life and OEM drive certified | Advanced AZO recording dye optimizes read/write performance allowing to record in approximately 5 minutes | 4.7GB is ideal for storing digital images, music , video and more. Each DVD+R allows you to store up to 1550 photos or more than 120 minutes of 720p video | Compatible with most DVD-R and DVD+R drives including Pioneer, Apple, Sony, Dell, LG, HP, Lenovo and others | Verbatim has been a leader in data storage technology since 1969, and guarantees this product with a limited lifetime warranty and technical support

100 high-grade non-rewritable DVD+R discs with a one hundred year archival life and OEM drive certified | Advanced AZO recording dye optimizes read/write performance allowing to record in approximately 5 minutes | 4.7GB is ideal for storing digital images, music , video and more. Each DVD+R allows you to store up to 1550 photos or more than 120 minutes of 720p video | Compatible with most DVD-R and DVD+R drives including Pioneer, Apple, Sony, Dell, LG, HP, Lenovo and others | Verbatim has been a leader in data storage technology since 1969, and guarantees this product with a limited lifetime warranty and technical support

PREMIUM CCA SPEAKER WIRE – Use this GearIT Pro Series copper clad aluminum (CCA) Speaker Wire Cable that’s build with high stranded conductors provides premium sound quality with for home theater and car audio system | CL2 RATED FOR CUSTOM INSTALLATIONS – You can make sure you get the highest safety standard when you use this GearIT Pro Series CL2 rated speaker wire for In-wall installation or to pair with banana plugs, spade tips, or bent pin connectors to connect your speakers to your A/V receiver or amplifier with this GearIT Pro Series speaker wire. | COPPER CLAD ALUMINUM (CCA) - Solid bulk speaker wires made of cca are lower priced than pure bare copper wire for the same conductivity with an aluminum core. GearIT CCA Speaker Cables provide the same conductivity with slightly higher resistance. | SOUND WIRE WITH POLARITY - GearIT Speaker Wire audio sound cables come with colored pvc jacket for easy polarity identification. Typically, red speaker wire is positive and black speaker wire is negative | PRO SERIES LIFETIME GURANTEED – We stands for the highest quality product and customer satisfaction. If you are not happy with the product in anyway we offer an easy return policy. All product come with our top rated lifetime warranty service.