Apevia 600W Essence ATX Semi-Modular Gaming Power Supply with black sandblasted casing | Supports Dual/Quad/Multi-core CPUs. Supports single 12V output for higher power usage. | Connectors : 1 x 20/24pin Main Power, 1 x 4+4pin 12V, 2 x PCI 6+2pin, 4 x SATA, 4 x Peripheral | Auto-thermally controlled 120mm black fan. Output: +3.3V@16A, +5V@20A, +12V@45A, [email protected], [email protected] | Heavy-duty protections: Short-Circuit/Over-Current/Over-Voltage/Over-Power/Under-Voltage/Over-Temperature Protections | IMPORTANT: The power supply will not power on simply by connecting the power cord to both the power supply and wall outlet. Ensure that all the power supply cables are properly connected to the PC for it to power on. | IMPORTANT: The 8pin CPU connector can be split apart to become a 4+4 connector by pushing one end of the 4pin down and the other end of the 4pin up for motherboards that require a 4pin power connector. | IMPORTANT: The 8pin PCI-E GPU connector can be split apart to become a 6+2 connector by pushing one end of the 6pin down and the other end of the 2pin up for graphics cards that require a 6pin power connector. | IMPORTANT: The 24pin motherboard connector can be split apart to become a 20+4 connector by pushing one end of the 20pin down and the other end of the 4pin up for motherboards that require a 20pin power connector

【For 2 Monitors】The computer stand can accommodate two monitors. This is an ideal choice when you need multiple computers to work together,also works on both laptops and desktops.The space under the monitor holder could hold tablets, cell phones, cables, pens, clips, and other office supplies. | 【Ergonomic Height】This stand adopt ideal ergonomic design,raise your computer screen to a comfortable sight level( 3.2""/82.5mm), reduce the strain of neck and eye while providing a better viewing experience and developing a good posture for you. | 【Sturdy & Stable】 With a maximum weight of 66 pounds, the monitor stand is made of thick 12mm/4.7inch wood, which has a very strong load-bearing capacity and can stably hold various items. | 【Product Size】Freely adjust the angle as you need,especially change the angles of the end pieces.The length can be adjusted from the minimum 26.7 inch to the maximum 36.6 inch. Rainbow Shelf dimensions 13.3 x 7.1inch ,Cloud Shelf dimensions 13.3 x 7.8inch, holds up to 66 lbs. | 【Easy to Install】all the screws have been completed pre-installation, just need to screw the feet on the shelf, middle rainbow board installs short feet 70mm, 2 cloud boards install long feet 82.5mm, three panels are lapped together at the top and bottom to complete the installation!

Supports GoPro and all other action cameras weight from 1.1 to 3.3 lb | This handheld gimbal stabilizer with quick release Plate 1/4" and 3/8" Screw is created for DSLR video cameras weight up to 2kgs.Easy To Assemble and Carry | As video stabilizer also allows high and low angle shooting,high precision bearings and low friction joints.100% high quality and new brand | The stabilizer can be extended from 11.6" to 15.8" to adapt to the weight of the camera | Aluminum construction with black powder coating，6 removable weights（100 +100+190)g*2

【4K60Hz HDMI Capture Card】 Capture HDMI input source using the HDMI capture card to capture high-quality gaming video. The HDMI 2.0 port supports 4K@60Hz pass-through, making it especially suitable for PS5, PS4, PS3, Switch, Xbox, DSLR, cameras, computers, DVDs, security cameras, HD players, and so on. | 【Plug & Play Ultra-Low Latency】 This video capture device supports 4K60 HDR/2K144/1080P240 loop-out. USB 3.2 streams 4K@60Hz video signals, outputting crisp, low-latency, high frame rate recordings. It presents stunning picture quality for gaming, recording, live streaming, rebroadcasting, and video conferencing. | 【Compatible with Multiple Systems】 Suitable for Windows, Mac OS, Linux, and Android. High-speed USB 3.2 technology and superior low-latency technology make it easier for you to transmit live streaming to Twitch, YouTube, Facebook, Twitter, TikTok, OBS, Potplayer, VLC, and Vmix. Enjoy high-speed transmission with no latency and record your moments in real-time. | 【Support Mic-in for Commentary】 The video capture card has built-in 3.5mm microphone audio input ports for plugging in a 3.5mm headset or microphone. Connect a streaming microphone to record game audio and streaming voice simultaneously, and use it to add external commentary while playing a game. | 【Supports VRR Variable Refresh Rate】 The built-in special chip enables seamless communication between the display device and the signal source, matching the frame rate and eliminating stuttering and tearing for an immersive gaming experience.

【Colorful Lighting with 24 Color Options】Our monitor stand features a 1-meter LED light strip that supports 24 colors and 4 lighting effects. Easily adjust the color and mode to create the perfect work or entertainment ambiance. | 【High-Quality Materials and Robust Stability】The stand is made from high-quality wood and sturdy acrylic legs, providing exceptional durability and support. It can hold up to 66 pounds, ensuring stable support for monitors and other devices for long-term use. | 【Flexible Height Adjustment】The acrylic legs offer two height adjustment options: 2.75 inches or 1.57 inches. Choose the height that best suits your needs to reduce neck and back strain, optimizing your work or gaming experience. | 【Elegant Design and Efficient Space Utilization】 The stand features a sleek and modern design that fits seamlessly into any desktop environment. It raises the monitor to an optimal viewing height and effectively utilizes desk space, helping you keep your workspace neat and organized. | 【Easy Installation and Versatile Application】The monitor stand comes with pre-drilled holes and detailed installation instructions, making assembly straightforward. In addition to serving as a monitor riser, it can also function as a printer stand, laptop stand, or desktop organizer, making it an ideal choice for optimizing desk space.

30-Day Money Back Guarantee | Original JFJ buffing pads -- Factory approved.

new

Easy to use and easy to carry wherever you need them | Reflects more light | Easy to assemble/disassemble, compact and easy to store | Diameter 50.5 inch / 128.3 cm | OPERATING SYSTEM: Windows 10, Windows 8.1, Windows 7

Super-cardioid unidirectional microphone | Battery-free operation | Switchable low-cut filter at 100 Hz | Integrated Rubber shock | foam windscreen included

Provides portable NP-F battery mounting for the L60-B | Requires 2 NP-F970/750/550 L-Series batteries made for lights | Comfortable rubber handheld grip | Standard 5/8" female light stand receiver | Integrated support legs for tabletop use | Disassembles in 2 pieces for compact transport | LED battery level indicators

Features 2x magnification and backlit for easy viewing | Compatible with Canon EF-S cameras with APS-C-size CMOS or CCD sensors, angle of view ranging from 104-84° and focus as close as 11.8” | Allows viewing of one slide at a time | Great for studio or at home use | A Pana-Vue transformer that is compatible with your viewer is included in the Deluxe Accessories so you can use your device safely

Interface:1 Gigabit RJ45 Port Input (data) and 1 Gigabit RJ45 Port Output(data+power),1 AC power Port Input (110-240V) | Safety:PoE chips automatically detect and classify the PD,It will Not Provide Power until a Standardcompliant PD is detected. | Material:The metal PoE injector weights of up to 2 pounds,innovative design have better heat-dissipation ,enable it run cooler than plastic one,thicker PCB and quality electronic components extremely extend its lifespan. | Convenience:Built-in AC/DC converter,no need external configuration,plug and play.Easy to deliver Max 90W of power on 4-pairs to 328ft away. | Application:Support wallmount,perfect network power solution for High Power PoE Devices,like LED lighting,PTZ Camera,Wireless Access Point,VOIP Phone, IP Camera,or other ethernet terminals. | Certifications:CE,RoHS, FCC, etc.

Specified Design for Canon EOS R8: Integrated aluminum camera cage designed exclusively for the Canon EOS R8 camera. This form-fitting camera cage is lightweight (0.35lbs/160g) yet robust, offering comprehensive protection and an effortless handheld shooting experience. Precision CNC machining ensures unobstructed access to the battery compartment, buttons, and LCD screen. | Included Cable Clamp for HDMI: The package comes with a removable cable clamp that can securely hold two cables simultaneously, ensuring stable data transmission. The clamp is adjustable to accommodate various cable thicknesses and connectors. | Includes Removable 2 in 1 Quick Release Plate: The full camera cage kit comes with a versatile 2 in a quick-release plate compatible with both Arca Swiss and compatible with Manfrotto clamps. Whether you're using a tripod with clamps for Arca Swiss or for Manfrotto, it seamlessly accommodates both. Additionally, with the quick-release plate, you can swiftly switch between landscape and portrait orientations. | Anti-twist Locking Design: The camera cage securely locks onto the camera using a bottom 1/4"-20 screw and two side lock adapters. Built-in non-slip rubber pads protect the camera from scratches while enhancing stability. Note: Before installing this bracket, please remove the side lock adapters. | Built-in QR Plate for Arca-Swiss and Multiple Mounting Points: The bottom of the cage features a built-in base for ARCA, compatible with DJI RS 2 / RSC 2 / RS 3 / RS 3 Pro gimbals and tripods for Arca-type clamp, allowing for quick transitions between gimbal, handheld, and tripod shooting setups. The cage also incorporates multiple 1/4"-20 and 3/8"-16 threaded holes for expanding accessory options, such as top handles, side handles, monitor mounting brackets, and magic arms, among others. The top cold shoe mount can accommodate microphone, LED video lights, and the left NATO rail is suitable for any NATO clamps.

Fits Coking z-pro series filter holder | Available sizes - 52mm through 96mm | Anti-reflective black anodized aluminum construction | Will stand up to years of use

Noise Reduction Circuit (NRC) | Heavy Duty Weight | Compatible with President 6-pin CB and 10M radios | Noise Cancellation

Speed: up to 6x. | Production process: high-to-low (HTL). | Surface: white, fully printable. | Pressure range: 23 - 118 mm. | Suitable for printing with appropriate inkjet printers.

Programmable security control board supports security and smoke detecting zones | Supports up to 10 2-wire smoke detectors and powers up to 15 input zones | Encrypted S-Line technology protects signals while supporting legacy 319.5 systems | LED lights indicate status of each individual zone | Charging circuit for back-up battery, fully supervised with power outage recovery | Programmable security control board supports security and smoke detecting zones | Supports up to 10 2-wire smoke detectors and powers up to 15 input zones | Encrypted S-Line technology protects signals while supporting legacy 319.5 systems | LED lights indicate status of each individual zone | Charging circuit for back-up battery, fully supervised with power outage recovery

What's in the box: Equalizer, Screws, Bracket, Owner manual, Warranty card | Features of R7EQ: Rockville R7EQ 1/2 Din 7 Band Car Audio Equalizer EQ w/ Front, Rear + Sub Output, Includes mounting brackets and screws for easy installation, 7 adjustable bands of equalization (50Hz,125Hz,315Hz,750Hz,2.2KHz,6KHz and 12KHz), Each band is adjustable from -18dB to +18dB, Adjustable subwoofer frequency from 40Hz to 250Hz | Built in crossover, Subwoofer level controls and subwoofer frequency cutoff controls (40-250 Hz), Built in 7 volt line driver, Blue LED lights on each rotary knob, Front, rear, and sub preamp outputs, Aux input with gain knob to adjust aux volume | Strong metal chassis with high quality rotary knobs for all controls, Amazing quality with low distortion (Built with top quality components), Frequency response: 20Hz TO 20KHz +/- 1dB, S/N Ratio: 101 dB, Crossover Roll-Off: 12dB per octave, Input impedance: 10K | Input sensitivity: 200mv per channel >7V, THD: 0.01%, Input: 12V, Output: 15V, Power requirement: 11-16V DC, Unit dimensions in inches: 7.04” x 4.72” 1.1”

No drivers required, Plug and Play | Provides advanced signal processing with great precision, colors, resolutions | Supports PAL, NTSC3.58, NTSC4.43, SECAM and standard TV format input

Ultra-compact low-profile cooler with only 39mm total height – ideal for HTPCs, ITX and Small Form Factor builds | 100% compatibility RAM- and PCIe-compatibility due to 95x95mm footprint, does not overhang the RAM or PCIe slots | Highly optimised NF-A9x14 slim 92mm fan with PWM support and Low-Noise Adaptor for automatic speed control and ultra-quiet operation | Includes high-end NT-H1 thermal paste and SecuFirm2 mounting system for easy installation on Intel LGA1150, LGA1151, LGA1155, LGA1156, LGA1200 | Trusted Noctua quality backed up with 6-year manufacturer's warranty

3 programing languages -> C, Python (compatible with 2&3) and Java. | 434-page detailed tutorials (including basic electronics knowledge) -> The download link can be found on the product box. (No paper tutorial.) | 223 items for 57 interesting projects -> Each project has a circuit diagram and tested code with detailed explanation. | Compatible models -> Raspberry Pi 400 / 4B / 3B+ / 3B / 3A+ / 2B / 1B+ / 1A+ / Zero W / Zero. (NOT contained in this kit) | Get support -> Our technical support team is always ready to answer your questions.

Protection against scratches | For M.Zuiko ED 40?150 mm F2.8 PRO | Suitable for 75 ? 300 mm MFT lens

CNC machined aircraft grade aluminum mounting plate | Fully adjustable 360 degree swivel mount | All the necessary hardware included | Detailed instructions for easy and quick installation | Sets the projector approximately 4 inches away from the ceiling

Only 37mm total height, ideal for slim HTPC cases and Small Form Factor (SFF) builds | Compact footprint for 100% RAM and PCIe compatibility on ITX motherboards as well as easy access to near-socket connectors | Quiet, premium-grade NF-A9x14 fan with Low-Noise Adaptor and automatic speed control via PWM | Includes award-winning NT-H1 thermal compound and easy-to-install SecuFirm2 mounting system for the AM4 socket of AMD’s Ryzen CPUs and APUs | Trusted Noctua quality backed up with 6-year manufacturer's warranty

SUPERCARDIOID POLAR PATTERN: Narrow concentrated pickup area directly in front of the microphone reduces unwanted surrounding noise and delivers direct-to-camera studio-quality audio | COMPATIBILITY: 3.5mm TRS connector is compatible with recorders, camcorders, DSLR & mirrorless cameras with a standard 3.5mm mic input | 1-YEAR WARRANTY: We’ve got your back! Our products are designed to ease your technical woes, not add to them. Our friendly US-Based support is here to help | CLEAR AUDIO: Integrated 4-point suspension mount and standard foam/furry windscreen reduces handling and vibration noise leaving you with crystal clear recordings for your production | ACCESSORIES: Includes a standard foam/pop windscreen an outdoor "deadcat" furry windscreen and a carrying case to keep everything together, perfect for creators that are always on the go

High Definition (Beveled Design) +10 Close-Up Lens | High-Index / Low-Dispersion 2 Element Optical Glass | Fully Multi-Coated & Threaded | Anti-Reflection Coating | High Speed Auto-Focus / Infrared Compatible

High Definition (Beveled Design) +10 Close-Up Lens | High-Index / Low-Dispersion 2 Element Optical Glass | Fully Multi-Coated & Threaded | Anti-Reflection Coating | High Speed Auto-Focus / Infrared Compatible

Stabilize Your Creativity - Elevate your filmmaking with our tablet video stabilizer. The swing-out handles of this tablet stabilizer ensure a secure grip and steady video recording and keep your photo shots and professional. | Seamless Shooting Experience - Our video stabilizer is a game-changer for your video production equipment setup, whether you’re shooting on the move or dynamic action or capturing still scenes, the stabilizer ensures a steady hand resulting to a professional recording. | Accessory-Friendly Design - With three cold shoe mounts for attaching lights, microphone, or other necessary gear. The bubble level supports the iPad horizontally and ensures a steady and level recording experience, enhancing the quality of your videos and providing optimal stability for your tablet. | Versatile Mounting Options - Achieve stable shots with the built-in tripod sockets; this tablet stabilizer for video recording easily mounts iPad on tripod, monopod, slider or any 1⁄4” device. An additional socket is versatile enough to mount horizontally or vertically for diverse angles. | Capture Cinematic Shots - Elevate your creative possibilities with the metal threaded lens mount in this handheld stabilizer designed to accept a variety of 37mm lenses and filters. Customize your shots with different lenses, achieving professional-grade visual effects. | Ideal for Any Setting - This iPad case with handle is ideal for variety of video recording setting like film making, vlogging, presentations, YouTube recording, broadcast programming, theatrical events, and many more.

{{IMPORTANT - READ}} Only Fits IPAD 10.2" current 8th and 7th Generation (not older models). Designed for professional recording and is perfect for Vloggers, Broadcast Programming, Theatrical Events, Presentations, Youtube Recording, ENG and Business Applications. | INTEGRATED SWING-OUT HANDLES provide a firm grip for stability during handheld video recording. The handles can also function as a tabletop stand and fold neatly into the case when not in use. | METAL THREADED LENS MOUNT can accept a variety of 37mm lenses and filters to expand your creative abilities. Two additional mounts keep lenses handy. | THREE COLD SHOE MOUNTS are provided for attaching video lights, microphones, and other accessories. BUBBLE LEVEL assists with positioning and keeping the tablet horizontally even during recordings. | BUILT-IN TRIPOD SOCKETS for mounting the unit directly onto a tripod, monopod, slider or any 1/4” device. An additional tripod socket on the side will support mounting both horizontally and vertically.

High Definition (Beveled Design) +10 Close-Up Lens | High-Index / Low-Dispersion 2 Element Optical Glass | Fully Multi-Coated & Threaded | Anti-Reflection Coating | High Speed Auto-Focus / Infrared Compatible

High Definition (Beveled Design) +10 Close-Up Lens | High-Index / Low-Dispersion 2 Element Optical Glass | Fully Multi-Coated & Threaded | Anti-Reflection Coating | High Speed Auto-Focus / Infrared Compatible

High Definition (Beveled Design) +10 Close-Up Lens | High-Index / Low-Dispersion 2 Element Optical Glass | Fully Multi-Coated & Threaded | Anti-Reflection Coating | High Speed Auto-Focus / Infrared Compatible

High Definition (Beveled Design) +10 Close-Up Lens | High-Index / Low-Dispersion 2 Element Optical Glass | Fully Multi-Coated & Threaded | Anti-Reflection Coating | High Speed Auto-Focus / Infrared Compatible

Promaster 4-Layer Photo Gloves V2 - X-Large

High Definition (Beveled Design) +10 Close-Up Lens | High-Index / Low-Dispersion 2 Element Optical Glass | Fully Multi-Coated & Threaded | Anti-Reflection Coating | High Speed Auto-Focus / Infrared Compatible

High Definition (Beveled Design) +10 Close-Up Lens | High-Index / Low-Dispersion 2 Element Optical Glass | Fully Multi-Coated & Threaded | Anti-Reflection Coating | High Speed Auto-Focus / Infrared Compatible

High Definition (Beveled Design) +10 Close-Up Lens | High-Index / Low-Dispersion 2 Element Optical Glass | Fully Multi-Coated & Threaded | Anti-Reflection Coating | High Speed Auto-Focus / Infrared Compatible

High Definition (Beveled Design) +10 Close-Up Lens | High-Index / Low-Dispersion 2 Element Optical Glass | Fully Multi-Coated & Threaded | Anti-Reflection Coating | High Speed Auto-Focus / Infrared Compatible