【Wooden Keyboard Cleaning Brush】Made of raw wood and durable nylon bristles. The handle feels good to the touch and the bristles are soft to clean without damaging the device. | 【Cleaning Electronic Devices】Can be used to clean your keyboard, mainframe, PC vent, laptop, printer, etc. Also good for cleaning dust and dirt on sliding doors, sliding windows, blinds and other tracks. | 【Easy to clean】Just rinse clean underwater, use a towel to absorb excess water, and then air dry at room temperature. | 【Package】You will receive 1 wooden cleaning brush, which is light in weight and easy to carry. | 【After-sales service】If you receive a damaged cleaning brush or have questions about it, please contact us through Amazon. We will reply you within 24 hours.

Replacement Charger cable for Garmin Vivosmart 3. NOT Fit any other model. | Convenient: with a replacement charger, You can convenient to charge Vivosmart 3 at home, in office, in car or on travel. | Power Protection Inside (PTC) : Keep your Vivosmart 3 safe from over-current or over-charging. | High Quality: high quality charger cable, it is a good choice to replace lost or damaged charging cable. | Package includes: 1 x charger (Vivosmart 3 is not included). NOTICE: Only fit for vivosmart 3, not fit for any other models.

Protector Series - This 2-piece adhesive Airtag case is compact and professionally designed to securely hold your Apple AirTags in place. The notches on our Airtag holder sticker mount help amplify the Airtag's sound when trying to locate your belongings | Premium-Quality Materials - This rugged, lightweight, scratch-resistant, shockproof, and durable Airtag holder is made of a high-quality hard plastic material to hold your Airtag comfortably and to protect your device from bumps, drops, and blemishes | Strong Adhesive - True 3M supreme adhesive allows the strong & secure mount of your Apple AirTags on any hard surface to track your precious belongings; With precise cut-outs, the adhesive air tag holder can seamlessly fit your Apple Airtag | Easy to Use - Stick the mount onto hard surfaces of bikes, electronics, luggage, drones, etc. and track efficiently from your iPhone; This makes Pelican's AirTag holder one of the best vacation, cruise, and travel essentials / accessories to own | Package Contents - 1 Unit of Pelican AirTag Holder Mount - Protector Series Grey (fits Apple Airtags only); 1 Year Warranty; (Apple AirTag not included)

Designed In Line With Ergonomics: Elevate the laptop so that you can keep an appropriate angle, facilitate typing and operation, and use it more comfortabe | Physical Heat Dissipation Simple And Efficient: By elevating the laptop, enhance bottom air circulation reducing laptop temperature to achieve the purpose of heat dissipation | Magnetic Design Easy to Connect: Nd-Fe-B magnet, durable and strong suction, readily adsorbable | Small Portable Carry-on: The two stands weigh about 1.76oz, small and exquisite. They can be easily put into pants pockets or bags | High Quality Silica Gel Flexible And Skid Proof: Silicone pad on top, laptop or iPad will not be scratched. Silicone pad on bottom, prevent laptop from sliding, support firmly

Cover your hot shoe from getting bent or damaged | Good looking design for your camera, very easy to put it on | Spring-inset allows exact-fit slide-on. The cover only shields the hot shoe, not support pop-up flash | Keeps the hot shoe dry and clean | The Hot Shoe Cover cap, fits most cameras. Note: Not compatible with Sony FA-SHC1AM/S

【Anti-slip Design】: Camera lens cleaning gloves have antislip design at fingertips to make sure that you can handle the cleaning tools. | 【Camera Cleaning】: When you cleaning your camera, wear lens cleaning gloves to prevent the secondary pollution. | 【Premium Materials】: Excellent air permeability, comfortable and suitable,More comfortable to use. | 【Appropriate Size】: Camera cleaning gloves use elastic fibers to guarantee the gloves fit your hand. | 【Multipurpose】: Professional camera cleaner or digital enthusiasts cleaning their own cameras,can also be used for material, matted photograph, sliver and coins inspections or used as serving gloves etc.

✅ MFI CERTIFIED - Certified iphone cord for your lightning devices. Built with original chip promise no warning message pops up, ensures that your lightning devices are loaded and charge safely and faster at maximum speed. | ✅ SAFE FAST CHARGING - Nikolable iphone charger cable are made of high purity copper core and smart intelligent chip with overcharge protection, stable current protection, automatic switching and battery protection. | ✅ STRENTHENED CONSTRUCTION - Nikolable iphone chaging cable with reinforced joint design that have passed 15,000+ times bending tests, durable two-shade armor shield gives the iphone charging cable stronger performance. | ✅ WIDE COMPATIBILITY - These 3pack iphone usb cords are complete compatible with all new iphone ipad with lightning port like iPhone 14/14 Plus/14 Pro/ 14 Pro Max/13/12/ SE 2020/ 11 / 11 Pro / 11 Pro Max / XS / XS Max / XR / X and more lightning devices. | ✅ ULTRA HIGH QUALITY - Nikolable iphone 3ft cables come with worry-free support and 24/7 friendly customer service. If you have any questions, pls send us message or raise a QA, well-pleasing solution provided.

The Excelshot USB Cable For Nikon DSLR D5300 includes: | 1X USB Cable For Nikon DSLR D5300 with Computer Cord | Download images from your digital camera to your computer with this USB Cable | This USB Cable is a replacement for the USB cable that is shipped with Nikon Coolpix D5300 | Compatible with Mac & Pc computer or printer

【HIGH PERFORMANCE】 Screw-in VGA cable connects a VGA (Video Graphic Array) equipped computer to a monitor or projector with 15-pin VGA port (also known as RGB, DB-15, DE-15, HD-15, HDB-15 or D-sub 15) for video editing, gaming, or video projection. Compatible with all VGA female port equipped devices. | 【LONG SERVICE LIFE】The high-quality connectors, high-conductivity copper conductors, foil & braid shielding and jamproof ferrite cores combine together to provide superior cable performance and exceptional picture quality. Finger-tightened screws provide a secure connection. tors, foil & braid shielding and jamproof ferrite cores combine together to provide superior cable performance and exceptional picture quality. Finger-tightened screws provide a secure connection. | 【HIGH 1080P RESOLUTION】Vga to vga cable supports resolution at 800x600 (SVGA), 1024x768 (XGA), 1600x1200 (UXGA), 1080P (Full HD), 1920x1200 (WUXGA), designed for LCD and LED monitor. | 【STRENGTH CONNECTIVITY】24K Gold-plated connectors, 28AWG pure OFC copper conductors, integrated ferrite core, all of them ensure a reliable connectivity between devices. | 【MIRROR AND EXTEND MODE】Under mirror mode, you could view your laptop or desktop's screen on monitor or TV, to increase the experience when having a presentation; under extend mode, you could connect a second monitor to computer, to process multitask operation.

1” White Plastic Adapter Spacer Ring for 5.25”-6” Car Speaker | See exact Measurements below or in images to ensure fitment | Utilizes existing vehicle mounting points, requires no cutting or drilling | Quantity: 1 Pair (2 Rings) ~ Color: White ~ Made in USA! | Fits most 5.25 inch to 6.5-inch Speakers - Does NOT fit over sized 6.5 speakers ~ Fits speakers with a cut-out diameter of 5” or smaller - Does NOT fit speakers with a cut-out diameter larger than 5”

2 Port VGA switch allows two computers or laptops to share one monitor, LCD, Projector,etc. | The VGA switch 2 input 1 output is built with panel button for switching. Metal shell, plug and play, no AC adapter required | The vga selector switch supports wide screen 16:9, 16:10, 4:3 Screen, up to 250MHz bandwidth for video clarity, support VGA resolutions up to full 1920x1080 and WUXGA 1920x1440 | Auto-detect display DDC information for the optimal resolution.Note: this is a VGA selector switch, not splitter for dual monitors. | Compact size and lightweight for convenient carrying.This vga switch box supports VGA, SVGA, UXGA, WUXGA and multisync monitors.

Compatible with: Kodak Video Camera EasyShare Zi8. | Great for replacement or travel backup. | Package includes: 1 Power adapter | Input: 100v - 240v. Output: 5V, 1000mA max. | MONEY BACK GUARANTEE -MONEY BACK GUARANTEE - We are Company that wants your Repeat Business so, if You Do Not Like our Product or Don't Want It For Any Reason, We Will Happily Accept The Return and Give Your Money Back. No Questions Asked. 30 Days Money Back Guarantee - 24 Months - Exchange.

Material: 3D printing resin | Suitable for reload film into 35mm film cassette, you can combine use with film changing bag to reload film under natural light or load film with this film load crank in a darkroom. | Fit for all brand 35mm film cassette | Brand: eTone | Package include: 1x film reload crank（not include film cassette）

★RATIONAL STRUCTURE DESIGN: The backpack clip mount is made up of two plastic plates.The top plate,adopts two-layer separation design,in order to realize 360 degree rotation.It can adjust any angle as your need,very convenient and fast. | ★WIDELY AVAILABLE: The range of the quick clip mount is about 35 degree.It can clamp many kinds of strap,and suitable for walking, hiking, outing and other outdoor activities. | ★HIGH-QUALITY AND HUMANIZED DESIGN: The clamp strap made by high quality plastic,strong and durable,more sturdy and tighter.There are three raised stripes on the edges of the surface.This non-slip design is based mainly on the consideration that you can force to the maximum and will not slip. | ★STABLE CLAMPING:Multiple rows of serrations increase the contact area with the object being clamped. Non-slip and stable, not easy to shake. | ★PRACTICAL: Free your hands to do more things and it can assist your camera to capture images.It easy to install and remove.

25mm to 17mm ball adapter material is: aluminum alloy, weight: 33g. Sturdy and durable. | 1'' (25mm) ball adapter compatible with RAM mounts and any B size double socket arm. | 17mm ball adapter compatible with Garmin 17mm swivel ball mounting pattern GPS mount. | 25mm to 17mm Ball adapter widely used on 17mm swivel ball mounting bike, motorcycle phone mount holder, navigation brackets and other electronic equipment mounts.

UPGRADE YOUR CAR: A simple way to upgrade your car or old home stereo to wireless by this Bluetooth Receiver car kit. | BLUETOOTH 5.2: Bluetooth aux adapter which offers more stable and faster transmission with CD sound quality. | BRAIDED CABLE: 60CM Braided wire is more durable and high-end for this Bluetooth car adapter. | METAL HOUSING: Bluetooth for car that built with Aluminum alloy which enhanced the durability and process quality. | USB POWER SUPPLY: Aux to Bluetooth supplys never stop music streaming with your USB port power DC 5V/1A. | AUTO ON: Release your hand that this Bluetooth aux receiver will auto power on and reconnect once the car start.

『Apple MFi Certified Lightning Cable』With the Apple MFi Cert, the USB-C to lightning cable cord equips automatic chip recognition function. Ensured safe charging for your devices. Enjoy fast charge and data transfer.Enjoy fast data transfer, syncing and charging. | 『Fast Charge & Data Transmission』High-quality four-core copper wires enhance charging & data transfer speed of the iphone chargers，which can accept 2.4A current for fast charging and 480 Mbps/s fast data transmission. | 『20W Fast Charging & Durability』10ft type c to lightning cord, charges iPhone 12 up to 50% in just 30 minutes, which saves more than 1 hour for you, when compared to the 5W original charger cable.Lasts 12× longer than other cables and tested to withstand over 20000+ bend in strict laboratory tests. The cable has extremely high resistant to splitting and breakage. | 『Massive Compatibility』iPhone charger Cable compatible with iPhone 13Pro Max/13 Pro/13/iPhone 12Pro Max/12 Pro/12/11Pro Max/11Pro/11/iPhone XS Max/iPhone XR/iPhone X/iPhone 8 Plus/iPhone 8/iPhone 7 Plus/iPhone 7/iPhone 6s Plus/iPhone 6s/iPhone 6 Plus/iPhone 6/iPhone 5s/iPhone 5c/iPhone 5/Pad Pro/Pad Air/Air 2/Pad mini/mini 2/mini 4/Pad 4th gen/Pod Touch 5th gen/ Pod. | 『18 Months Service』2M/10ft iPhone charging Cable * 3Pack , we provide 18 months of friendly customer service. If you have any questions, please contact us, we will provide you with a satisfactory solution within 24 hours.

Universal Compatibility-Lightning cable fast charging for iPhone Charger, widely compatible with iPhone 14/14 Pro/14 Pro Max/14 plus/13/13 Pro/13 Pro Max/13 Mini/12/12 mini/ 12 Pro/ 12 Pro Max/11/11 Pro/11 Pro Max/ XS Max/ XS/ XR/ X/8, Pad Pro 10.5"/Pro 9.7"/Mini(2019)/Mini 3/Mini 2/Air, Pod Touch 7th/6th/5th/4th gen, Pod Nano 7th/6th, and other IOS versions.【Please make sure you need USB C CABLE to charge Pad Air 2020 10.9"(4th Generation), Pad Pro 12.9" Gen3/Gen4 and Pad Pro 11"】 | Fast Charging and Data Transfer- iPhone Cable supports high-quality rapid charge up to 2.4A, charging speed faster and safer, charging time savings. Transfer speed up to 480Mbps can help you work efficiently.  | MFi Certified-MFi lightning cable suitable for IOS versions, with resistance-resistant aluminum alloy connectors, to ensure that your device is charged quickly and safely, and transmits data stably. | Durable Material-iPhone cable With 20,000+ Times bend tests, the nylon braided cable is more flexible. Covered with superior aluminum housing and a braided-nylon jacket make the cable more durable, and also protect against physical stresses. | What You Get-iPhone charger cable [3ft/4-Pack] with 7x 24 Hours friendly customer service, A Worry-free 1-year warranty. If you have any questions, please feel free to contact us.

Compatible with Gopro Hero 11 10 9 8 7 6 5 Max Session 4 3+, DJI Osmo, Sjcame, Xiaoyi and AKASO Campark Action cameras | High quality, Lightweight, Extremely durable material and Easy to carry | Pefect design for underwater photographing and water sports, such as swimming, diving, surfing and etc. | Multi-purpose hollow container, you can open the bottom cover and place your valuable small items inside for convenient | Package Content: 1 x Floating Hand Grip, 1 x Long screw, 1 x Wrist strap, 1 x Carabiner (Random Color)

Compatible with All Action Camera | 90 degree converting design allows more shooting angles | Ultra portable compact design | Made of durable lightweight ABS plastic

【Multi-angle Adjustment】This go pro windshield mount supports multi-node multi-angle rotation adjustment to meet your shooting needs.It can help you adjust the camera to the best shooting angle and appropriate tightness to obtain professional photos or videos. | 【Compatiblility of Camera & Phone】PULUZ go pro mount can be used for some driving recorders and most sports cameras, such as GoPro Hero 9 8 7 6 5 Black, Xiaomi YI, etc. At the same time, if matched with the corresponding mobile phone holder, it is also suitable for most mobile phones such as iPhone, Samsung , Xiaomi, Huawei, etc. | 【Widely used】Sport camera suction mount has excellent adsorption capacity on any smooth surface, attaches camera housing to glass surface, tile surface, table top and painted surface. Perfect for various occasions, such as cars, ships, motor boats, etc, you can enjoy the POV filming. | 【Easy to Install】go pro car mount has a circular suction cup area with a diameter of 68mm, strong adsorption. You need to take it out after use, you can clean and dry the surface of the suction cup to restore its viscosity and save it for next use.Simple structure and friendly design make it easy to install and use. | 【Kindly Note】Keep car windshield, glassware, ceramic tiles and other contact surfaces clean and flat. It is recommended for non-impact activities only, not recommended for surfing, snowboarding or other high-impact sports.

The DB 9-pin to VGA 15-pin adapter cable is a special adapter cable Some video devices are 9-pin, but our graphics cards are all 15-pin, so this cable will be your best choice | Pin definition: 1 pin-1 pin; 2 pin-2 pin; 3 pin-3 pin; 4 pin-13 pin; 5 pin-14 pin; 6 pin-6 pin; 7 pin-7 pin; 8 pin-8 pin ; 9-pin-10-pin/11-pin | Using polyethylene, HDPE inner insulation, high-fidelity design, strong anti-interference ability, reduced transmission signal attenuation, and good use effect. Well-crafted thumbscrews allow easy insertion and removal of plugs while ensuring easy and safe connection | This adapter cable is only used to pass RGB signals through the 15-pin connector of the RGB to VGA converter. It cannot directly convert these RGB signals to VGA. | The adapter cable from DB 9-pin to VGA 15-pin is suitable for computers, notebooks, projectors, KVM switches and other video displays.

Stable and reliable chipset CP2102; Supports full range of STC single-chip microcomputer with output voltage 3.3V and 5V; Supports Windows 98SE, 2000, XP, Vista, Window7, Mac OS 9, Mac OS X & Linux 2.40. | Baud rates: 300 bps to 1.5 Mbps, support for the highest baud rate up to 115200 bps. | Standard USB type A male and TTL 5pin connector. 5pins for 3.3V, RST, TXD, RXD, GND & 5V; Connect MCU easily to your computer! | With indicator LEDs: power indicator, the indicator data reception, data transmission indicator. After the driver is correctly installed, the status indicator will be on, the sending and receiving indicators will flash when communicating, and the higher baud rate, the lower brightness. | Application: It is designed to be used for USB to TTL electronic projects. Package included:3* USB To TTL 5 pin UART STC Downloader Module + 3*Jumper Wires

Dual Band WiFi: 2.4GHz (2400 - 2485 MHz),5GHz/5.8GHz (5150 - 5850 MHz); Gain: 7dBi; Direction: Omni-directional; Antenna Connector: RP-SMA Male ; Antenna Length:19cm/7.5inch; | Professionally designed for Furrion Back Up Camera | Compatible with Furrion Back Up Camera, wireless security system; backup cameras/ rear view cameras/ parking cameras on car, pickup truck,tractor,trailer; FPV Goggles, FPV receiver, FPV camera, FPV Drone controller | Package List: 2 x Antenna | Don't worry about any problems, we have carefully checked each product, we are willing to provide 30 days free replacement and Free return,100%

Package included: 2X 40pin male to female breadboard jumper wires, 2X 40pin male to male breadboard jumper wires, 2x40pin female to female breadboard jumper wires | The breadboard jumper wires 40 PIN ribbon cable, easy to identify each wires in your DIY or prototype;Fast circuit tests without soldering. Comes with 10 colors to easily distinguish chart connections. | The Jumper wire PVC material; insulated and flame retardant, high temperature resistant wire; safe and durable; small pins and sockets at both ends of the wire, no need to solder, plug and play, easy to connect when conducting circuit experiments | The Jumper Dupont cable can be used for connection during circuit experiments and also for pin extensions of the experimental board for additional experimental projects. Very secure connection to the pins, no soldering required, also for fast circuit testing | If you have any questions, please feel free to contact us

High Quality: The double ball bearing has a service life of 65,000 hours, and the 7 blades generate strong airflow to keep the cabinet cool. | Three Speeds: Silent fan features a multi-speed controller to set the fan’s speed to optimal noise and airflow levels. Low gear (L), middle gear (M) and high gear (H), the noise is only 21dB in low gear. | Full Protection: Iron grill on both sides can protect your hands or prevent damage to the power cord during operation. | Convenient USB Fan: The USB plug can supply power to the fan through the USB port on the back of popular audio-visual electronic equipment and game consoles. | Dimension: 3.64” X 3.64” X 1.81”. Shockproof foot pads can make the fan lay flat or upright.

【12cm USB Fan】: USB cooling fan, perfect for cooling various electronics and components, noise only 23dB (Low Speed) while working. | 【L/M/H Speed】: A speed controller is specially designed to control the airflow level. Meet your different needs. | 【High Quality】: Dual ball bearing have a lifespan of 45000 hours, 7 blades generate strong airflow to keep the cabinet stay cool. | 【Place Anywhere】: can be laid flat or stand upright. Great for narrow space: Laptop, receivers, AV electronics and game consoles... | 【Full Protection】: Aluminum grill on both side protect your hand or prevent damage cord when operating.

Type - UHF male to UHF male adapter. Used to connect two uhf cb radio connector or uhf coax cable together. Easy to install. | Low Loss Low SWR - The attenuates signal of this cb radio connector is less than 0.1db. VSWR< 1.15(DC-1G). Made of brass copper and teflon insulator for a reliable signal every time. Neither measurable swr increase, nor signal loss. | Sturdy & Well Made - This pl259 male to male adapter is made of brass copper body and teflon insulator for a good connectivity and reliable signal every time. Heavy duty and water proofing body to secure them fits well and seals tightly. Durability :≥ 1000 times mating life time. | Professionally Made: MOOKEERF as pl-259 male adapter manufacturer, each uhf male adapter swept with USA KEYSIGHT E5071C ENA network analyzers. We are confident with the quality and offer 12 months warranty and 100% satisfaction guarantee. | Applications - Suitable for join pl259 adapter cable and device indoors and outdoors. Applicable to CB HAM Radio, VHF Radio, Antenna, SWR Meter, Antenna Analyzer, Amateur Radio etc.

Wire Stripper for RG-58, RG-59, RG-6, RG-8X, Mini-8 and LMR-240 Coax Cables | Adjustable and Replaceable Blades with 4 Modes for Different Types Coaxial Cable | Removes 4, 6, 8 and 12mm Insulation (adjustable) | Smooth plastic grip provide extra comfort and hard plastic construction for durability | Use easily, lock the tool over the cable, spin clockwise, then pull off the unwanted portion

EFFECTIVE VIDEO SURVEILLANCE SIGN: With eye-catching and visible red & black colors and security camera design keep your property safer and have peace of mind. Effectively inform people that this property is protected by 24 hour video surveillance! | DOUBLE SIDED-DOUBLE PROTECTION: When applied to class surfaces like windows and glass doors, the sign will be visible from both sides. One sticker double effect. | PREMIUM QUALITY: Professionally made in Europe. Printed on 5 layers: 2 laminations, 2 vinyl and 1 metallized glossy. High-quality vinyl used on both sides. UV resistant PVC laminations UV resistance inks applied further resistance to sun light and weather conditions. It is durable and ideal both for indoor and outdoor usage. Stickers are waterproof and fade resistant. Thanks to metallized glossy layer the sticker can glow at night when struck by the light. | PACKAGE CONTENT: 6 pieces 6" x 4” and 6 pieces 3.5" x 2.5" video surveillance sign stickers. In total 12 stickers. | CLEVER SIGNS GUARANTEES 100% SATISFACTION: We hope "Video Surveillance Sticker" brings you great satisfaction. Please note that we are always here to help you with your questions and inquiries.

Package content: 2 pieces of 41 mm black tripod quick release plates which are compatible with Ambico V-0550 V-0551 V-0552 V-0553 V-0554 (fluid type head only), Sunpak 7500 Pro 7500tm 7575, Kalimar Pro-Tech V-40, and so on | Good workmanship: the camera mount adapter plates are made of PVC material and the middle anti-twist locking screw is made of aluminum material; The surface is finely oxidized to give it a long service life, so you can use these camera mount adapter with confidence | Standard anti-twist locking screws: these ball head quick release plates are equipped with standard anti-twist locking screws which conform to international standards, compatible with the standard for camera tripod ball heads | Easy to install and remove: the quick release plates can be fixed to the camera base, which can save your time and facilitate the installation and disassembling of the tripod, easy for you to use | How to install: depending on the card position position of the Pan/ Tilt/ Zoom, you can insert the tripod quick release plates directly for installation; The quick release plates have a slotted screw that you can tighten with your fingers or coins

2-Pack USB C to A Adapter: 2-Pack USB C to USB adapter design won't block other ports, making it perfect for side-by-side use for the MacBook Type C port. | Data Transfer & Charging: 5Gbps high-speed data transfers. Transport files via USB A to USB C in seconds. USB to USB C Adapter supports 2A charging for devices via USB A port. | Stable Connectors & Durable Design: This USB C to USB A adapter is designed to be plugged and unplugged up to 10,000 times. Made from high-quality, scratch-resistant aluminum alloy, get excellent wear resistance and heat dissipation. | Portable Plug & Play: Simple plug and play USB C to USB adapter, no drivers needed. The mini design makes this compact adapter a perfect fit in your purse or computer bag. | Universal Compatibility: The USB C to A adaptor is compatible with Type C/Thunderbolt 3 laptops/tablets/OTG phones, such as Samsung S23 Ultra, Galaxy S22/S21/S20, MacBook Pro/Air 2022, iPad Pro 2021/2020. Can be used with 2 mm/0.08" thick phone cases, or other USB-C devices.

Power cable adapter for your-ring Solar Panel and Super Solar Panel, to change your solar panel( DC round barrel plug version) to USB-C version. | This power cable is only designed for-Spotlight-Cam-Plus and-Spotlight-Cam-Pro. It is a 3.5mm DC plug to USB-C adapter connector. | Quality Made. This power cable is made of quality material to ensure the best charging experience for your cameras. | Other bands solar panels which also have a 3.5mm DC round barrel plug are also can be changed to USB-C version solar panel via this power cable adapter. | No need to purchase a new version USB-C solar panel version. Just change your old version cable connector.

Compatibility: The lens hood is designed for Nikon AF-P DX NIKKOR 70-300mm f/4.5-6.3G ED VR & Nikon AF-P DX NIKKOR 70-300mm f/4.5-6.3G ED, and replaces Nikon HB-77 Hood | Unique Design: A non-glare matte finish inside to limit lens flare, so no vignetting will show. And reverse attaching to the lens saves storage space | Flexibility: With the lens hood, a filter and a lens cap can be also mounted onto the lens | Improvement: To prevent stray light from entering the lens, improving your contrast and image quality | Protection: To protect the lens from moisture, wind-blown debris & impact

Compatibility: The neck strap fits for most mirrorless cameras with 2 strap eyelets such as Sony ZV-1 II, ZV-1, ZV-E1, ZV-E10, A7C, A6700, A6600, A6500, A6400, A6300, A6100, A6000, A7 IV, A7 III, A7R IV, A7S III, A9 II, Fujifilm X-T5, X-T4, X-T3, XT30 II, XT30, XT20, X-PRO3, X-PRO2, X-S20, X-S10, X100V, X-E4, Canon M50, M6, M5, Nikon Z30, Z50, Z6, Z6 II, Z7, Z7II, Olympus E-M10 Mark II, E-M10 Mark IV, E-M5 Mark II, Panasonic GX100, etc. | Comfortable & Durable: The strap features a 1.2" wide by 21.3" long neoprene pad. It evenly distributes the camera weight thereby minimizing strain on your back and neck. | Rugged interior & Anti-slip exterior: The rugged interior surface prevents the strap from going around when shooting. The anti-slip exterior surface constructed from breathable fabric provides better heat dissipation. | Flexibility: For most mirrorless cameras, 2 camera strap rings and lug protectors are included in the package for attaching neck strap to the camera eyelets. | Adjustable Strap: With the 2 buckles, you can easily adjust the strap to make you comfort and ease. The strap is fully adjustable from 23.6 to 43.3" to meet different needs.

Compatibility: The lens hood is specially designed for Nikon AF-P DX NIKKOR 18-55mm f/3.5-5.6G VR Lens & Nikon 1 NIKKOR VR 10-100mm f/4-5.6 Lens, and replaces Nikon HB-N106 Lens Hood | Unique Design: The hood features a non-glare matte finish on the interior surface to further limit lens flare so no vignetting will show with the hood on. The "petal" shape maximizes the amount of hood coverage for the minimum amount of weight and hood area | Flexibility: Reverse attaching to the lens saves storage space. It allows you to put on a filter and a lens cap | Improvement: The camera lens hood prevents stray light from the lens by extending and shading the end of the lens, improving your contrast and image quality | Protection: It would protect the lens from moisture, debris, scratch and impact

The rear lens cap & body cap are for Fujifilm X-T30, X-T20, X-T10, X-E4, X-T4, X-T3, X-PRO3, X-PRO2, X-S10, X-A10, X-A7, X-A5, X-T200, X-T100 and more cameras and lenses with X mount. | The kit can effectively protect your valuable lens rear glass, electronic elements and the camera sensor from scratches, moisture, dust, fingerprints and sun rays. | Finger-grip edges on the body cap aid in placement and removal. | Made of high quality ABS, durable and lightweight. | Package Including: 5 rear lens cap & 5 body cap.

The rear lens cap & body cap are for Nikon D3500, D3400, D3300, D3200 D3100, D3000, D7500, D7200, D7100, D5600, D5500, D5300, D5200, D5100, D5000, D780, D850, D810A, D810, D750, D6, D5, D4s, D4 and more cameras and lenses with Nikon F mount. It replaces Nikon LF-4 rear cap and BF-1A BF-1B SLR body cap. | The kit can effectively protect your valuable lens rear glass, electronic elements and the camera sensor from scratches, moisture, dust, fingerprints and sun rays. | Finger-grip edges on the body cap aid in placement and removal. | Made of high quality ABS, durable and lightweight. | Package Including: 5 rear lens cap & 5 body cap.

[Capacity] The sd card case can store SD/SDHC/SDXC Card x 6, Micro SD/Micro SDHC/Micro SDXC/TF Card x 12. | [Protection] The external shell is made of high strength & eco-friendly PC, protect the cards from dust and loss. Double-sided interior consists of molded EVA where memory cards can be safely kept in specific compartments and reduce shock. | [Easy to pull and lock] The storage drawer will automatically pop up when you push the button to the unlocking icon and it will be locked once you push it back to the shell. | [Double-sided Interior] The memory card case features double-sided interior storage slider which can maximize the use of storage room. | [Compact and portable] With compact size 7.0 x 2.0 x 0.6", which can be put easily into your pocket and bag. Attach the case to your backpack or belt with the elastic silicone lanyard.

Compatibility: The lens hood is specially designed for Fuji Fujifilm FUJINON Lens XF14mm F2.8 R & FUJINON Lens XF18-55mm F2.8-4 R LM OIS, and replaces Fujifilm 14/18-55 lens hood. | Unique Design: The hood features a non-glare matte finish on the interior surface to further limit lens flare. This flower shape takes the final image shape and aspect ratio into account. It allows the lens hood to block stray light with the higher portions of the hood, while allowing more light into the corners of the image through the lowered portions. | Flexibility: Reverse attaching to the lens saves storage space and the original Fujifilm lens cap can be attached to the lens normally. | Improvement: The camera lens hood prevents stray light from the lens by extending and shading the end of the lens, improving your contrast and image quality. | Protection: With the extended lens end, it can protect your lens from moisture, wind-blown debris and accidental impact.