Replacement side door battery cover for GoPro Hero 11 Black / Hero 10 Black / Hero 9 Black cameras. | Compatible with GoPro Hero 11 / 10 / 9 Black camera perfectly. | This replacement battery cover side door is made of aluminum alloy, it offers better protection for your camera battery and durable for long term use. | The side door battery cover reserved hole for Hero 11 / 10 / 9 Black camera's type C charging port, which makes it more convenient to charge the camera without removing the battery door cover. | Easy to install and no tools required.

MT-VIKI KV18-2, 2-packs 2 in 1 VGA KVM Cable connects computer to KVM Switch device with VGA and USB port. | Fully coated and shielded PVC outer layer for maximum protection | MONITOR: VGA/SVGA HDB 15-pin Male to Male. | KEYBOARD/MOUSE: USB 2.0 Type A | LENGTH: This KVM cable is 6 feet (1.8 m)

PK-Zero is an affordable, high grade thermal compound that can be purchased in 5g, 30g, 150g, 300g, and 600g quantities. An economical and powerful solution for those in need of reliable cooling. | PK-Zero thermal paste is both electrically non-conductive and non-corrosive, making it safe to apply to delicate electronics and components. | PK-Zero features low viscosity, allowing for easy and even application to surfaces. The paste is thick enough to hold its shape but applies and spreads without difficulty. This makes getting an even coating over the entire surface on the component effortless to achieve. | The low dry-out of the compound guarantees long and stable life without worry of loss of performance. | No burn-in time required. PK-Zero can be applied and will immediately provide maximum performance.

SUPER PROTECTION - Featured with high quality non-itchy silicone coated fiberglass and super shielding metallic fiber, provides signal blocking functions as well as stands up the temperature up to 1832℉（1000℃） | LARGE CAPACITY - 9.8"X11".fits tablets, cell phones, radios, GPS units, key chain attachment, it’s portable and easy to carry. | CONVENIENT TO USE - Putting ID card, bank card such as IC magnetism card into the faraday bag, it can avoid magnetism lost and info leak. | WATER RESISTANT - Not only does our bag stand up against fire, but it's also highly water resistant just in case it gets wet for any reason. | PROTECT YOUR CAR - Your signal can be hacked from your fob if you have keyless entry on your car and a carjacker can steal your car without you knowing it, but this faraday bag will stop the signals from being hacked

1.Dimension of Module: 12.8X3.3X1.3cm(5.04X1.3X0.51in) | 2.64 fixed screw holes with 3mm in its diameter | 3.A single module can drive a 8x 8 dot matrix common cathode | 4.Equipped with input and output interfaces, support for multiple modules to cascade | 5.MAX7219 Dot Matrix Module Red Light for Arduino Microcontroller 4 in 1 Display with 5pin Line

Compatibility: The 3.5mm/USB-C Adapter is designed for the DJI Osmo Action camera. (Note* It's not compatible with Osmo Pocket.) | Microphones Jack: Add external 3.5mm microphones to your camera and enables improved audio by using directional microphones with a 3.5mm jack.(Note* The microphone is not included in the package) | USB-C Connector: The USB-C connector for battery charging and data transferring while using the microphone | Flexibility: Can use the adapter on your camera with or without the official DJI Action Frame | Materials: Made of ABS Plastic, compact & portable

【Perfect Storage】CASE ONLY! (Printer and accessories are not included). Canon IVY case compatible with Canon Ivy 2 mini photo printer, Canon IVY mobile mini photo printer, Canon IVY CLIQ CLIQ+ CLIQ 2 CLIQ+2 instant camera printer, mesh pocket fit photo paper and cable. | 【Premium Material】IVY 2 case made of PU material and high-quality durable EVA sturdy shell keeps your canon IVY 2 photo printer protected. Soft velvet interior lining keeps your instant camera printer and small accessories free from scratches. | 【Simple and Practical Design】 The inner mesh pocket storage space keeps the items well-organized, and can effectively store small photo printer accessories. Canon mini printer case built-in elastic band can fix mobile printer and prevent Canon ivy printer from accidentally falling. Double strong zipper allows you to easily remove or put the mini picture printer from the photo printer holder. | 【Portable Design】 External dimension: 5.9" x 3.93" x 1.9" inch. (L * W * H) Internal dimension: 5.19" x 3.3" x 1.2" inch.(L * W * H). Includes detachable wristband for easy carrying for your comfort. You can carry mini printer anywhere, put ivy mini photo printer case in your hand. Compact size and easy to use. Canon photo paper storage case is slim and lightweight, save space and can easily slide into your backpack or other bag. | 【Perfect Gift】The mini printer photo paper case is easy to carry and is very suitable for home, travel, outdoor camping, business, school. Canon IVY 2 portable case is also the best gift for Thanksgiving, Christmas, New Year, Remembrance day, Birthday, Father's Day and Mother's Day.

HYS Dual band UHF/VHF 144/430MHz 2meter/70cm mobile transceiver antenna. | Connector type: SL-16 J (Male)/PL-259 | Dual Frequency 144/430MHz;Gain:2.15dBi (144MHz) ,2.5dBi(430MHz) | Length: 12.5inch | Each antenna will be tested more than threes times, all our product made of high quality material and provide excellent performance! we also provide 30 days no reason to return

Boost Signal: HYS 771FG tactical antenna made by high quality material, which can boost the signal for your device. | Tactical Design: antenna is foldable, when you're not using your device, you can easily store it. What is more, with a gooseneck, You can adjust any angle you like. | Compatible with AnyTone, BaoFeng, some Wouxun, and some Kenwood Walkie Talkie; Working for baofeng model number:GT-3, UV-5R, UV5RE, UV5RA,UV5R Plus UV-82L , BF-888S.etc | Specification:SMA-female Connector; Dual Band,144/430MHz; 18.7Inches; 2.15/3.2dBi and Max 20Watt input power. | The antenna is suitable for hunting hiking camping outdoor work. What you get: 1PCS HYS TC-771FG SMA-Female Antenna.

The HYS CB Antenna can increase the radio signal reception capacity. In addition, due to the high gain, the antenna can also enhance your radio’s signal transmitting ability, can greatly improve the signal transmission distance | Frequency: 27Mhz Max Power: 20Watt | Length: 16.1inch Connector: BNC V.S.W.R: LESS1.5 Polarization:Vertical | Compatibility For Cobra HH38WXST HH50WXST HH50 MRHH350FLT C75WXST Midland 75-822 75-785 MHS75 Uniden BC75XLT PRO401HH BC125AT | What you get: 1PCS XP-70 BNC CB Antenna. If you any technical or unsatisfactory problems, plz contact us by clicking “RADIO MAX” that below the "Buy Now", and find the button "ask a question"

✔ Compatible with Eufy Security Solo IndoorCam P24 and S220, also fit for other cameras with standard 1/4 threaded hole such as Eufy Cam 2C, Arlo Camera, Roelink Argus and etc. | ✔ 360-degree adjustable angle allows you to get a better view that you desired. | ✔ Easy installation with screws or 3M VHB tape, two mounting ways for your choice. (Note: After the adhesive tape, wait for at least 24 hours before installing the camera.) | ✔ Made of high quality material, sturdy and safe, strong adhesive 3M sticker or screws ensure that the camera will not fall off. | ✔ Lifetime warranty for all our products. If any problem, feel free to contact us for 100% full refund or new replacement.

Hermitshell Hard Travel Storage Carrying Case Bag | Protect your favorite device from bumps dents and scratches | Made to fit Logitech Spotlight Advanced Presentation Remote | Material:EVA ,Color: Black, Internal size: 6x 1.2 x 0.6 inch | For sale is case only (device and accessories are sold separately)

*Impedance:8 Ω *Max Power: 5 Watts | *The length of Cable:1.8M With 3.5mm Mono Plug | *Size:80x 67x44mm | *Swivel Bracket | *This Speaker is suitable for Mobile Transceiver (Ham Radio / CB Radio)

S0-239 UHF female connector.Used for connecting two PL-259 connectors together. | Nickel plated and designed to offer the lowest VSWR rating of the two series | Size : 27 x 15mm/1.1" x 0.6" (L*D) | Commercial Grade UHF Series Adapters Nickel-Plated Machined Brass Construction | Package Content: 5 x UHF SO239 Female to Female Connector

5.5 MM x 2.1 MM Dc Jack Female 10V: Threaded 10V 30V high current metal dc female receptacle plug; Mount Hole Diameter : 11mm;Total Size : 16 x 17mm/0.63" x 0.67"(D*H) | Male & Female dc Jack with Cable 5.5mm x 2.1mm,Durable: High Quality Metal Copper Material 2.1 5.5 jack, Insulation flame retardant,Fast conduction | High Quality Lsgoodcare 5.5MM x 2.1MM dc power pigtail cable 12v male connectors, make of inner core pure copper, good conductivity; premium pvc anti-aging material, durable | Dc Power Pigtail Cable Connection Are Easy to Use: black: negative - ; red : postive +; cctv pigtail connector for cctv security camera, audio, tv ect | Package Include: 5.5 x 2.1 mm dc barrel jack panel mount connector female with cable &5.5 x 2.1mm dc pigtail cable male

Adjustable 3- Way Pivot Arm Assembly Extension Adapter Mount +Same Direction Straight Joints Mount+ Thumb Knobs for HERO 10, HERO 9, HERO 8, HERO(2018), HERO 7,6,5 Black, HERO4, HERO3+, HERO3, HERO2, Go Pro Session, DJI Osmo Action, AKASO, Campark, YI Action Camera and More | The Go Pro extension arm are made of high quality aluminum alloy, rustproof, rugged and durable | Action cameras Accessories Kit Extension Arm Adapter Pivot Arm Thumbscrew Same Direction Straight Joints Mount | Universal straight joint Arm Mount Set, Action cameras Accessories Kit, Extension Arm Adapter Pivot Arm | Grab bag included 1 long Same direction Pivot Arms mount +1 short Same direction Pivot Arms mount + 1 long thumbscrew

【Wide range of applications】: used in home theaters, mobile phones, karaoke players, speakers, stages, etc. | 【Operation is simpler】:Insert the usb bluetooth receiver and connect your device with it, the name is "YET-M1" immediately transform your device into a fashionable wireless bluetooth device. | 【Wireless playback】: Eliminate the trouble of wired connection. Through wireless connection and transmission, users can enjoy high-fidelity music anywhere in the room through the wireless control of the AUX port and audio cable. | 【Portable design】: small and exquisite, portable feature allows you to carry it anywhere | 【Transmission】: The transmission rate is 3 (Mbps), and the longest transmission distance is 10m. Note:This Bluetooth is only suitable for speakers,and cannot be used on the car,The USB interface only provides power supply.

✅The civic radio wiring adapter harness compatible with Honda Fit 2007-2008, Civic 2006-2011, CR-V, 2007-2010, Odyssey 2008-2010, Pilot 2009-2011. | ✅Radio wiring harness for pilot replacement for Acura NSX 1991-1996, RL 1996-1998, TL 1996-1998, Vigor 1992-1994, RDX 2007-2015 Non-Navigation, Legend 1989-1996, Integra/CL 1996-2001. | ✅Easy to use. Car Radio Wiring Harness for Honda Without cutting any OEM wiring harness, antenna adapter plug and play. The cr-v radio wiring harnesses use standard color-coded wires. Pre-stripped to making it easier to install the wiring harness. | ✅The pilot radio wiring harness adapter is made of professional copper core material for the safety and durability. | ✅The radio harness odyssey allows for the installation of an aftermarket radio using the existing factory wiring and connectors. NOTE: Radio antenna adapter NOT compatible with factory amplified systems, NOT work for premium audio radio.

★nRF24L01 is a single chip radio transceiver for the worldwide 2.4 - 2.5 GHz ISM band. Compatible with Ar duino and Raspberry Pi | ★Applications: Wireless peripherals, remote control systems such as RC vehicles and consumer remote electronics, wireless voice transmission such as VoIP, wireless sensor networks, wireless networks, home and commercial automation | ★Ultra small: 15x29mm (including:built-in 2.4GHz antenna),for easy implementation into designs without additional hardware | ★Auto-acknowledge and auto-retransmit function | ★You can find several resources available online easily,such as tutorials, data sheets, and notes

Filter out Blue Light and relieve computer eye strain to help you sleep better. | Actual Screen Protector dimensions are 11.6 inch measured diagonally. 10.12 inch width x 5.71 inch high. Aspect Ratio 16:09. Please compare your monitor to our measurement picture before purchasing. | Block Blue light at wavelength at 380nm-490nm. | Easy to apply and remove. This package includes 3 screen protectors and an installation kit. | Protects screen against scratches and Anti Glare function.

Replaces Olympus EP-13, EP-12 eyepiece for Olympus OM-D E-M1 Mark II and E-M1 camera. | It features extended soft silicone design which can protect your viewfinder from dirt, moisture, dust, and block unwanted light during use. | Effectively keep your viewfinder safe from impact and scratches. | The durable silicone rubber design is comfortable and has strong abrasion-resistance. | It mounts easily and securely to the viewfinder making an excellent spare or replacement item

Compatibility: The bayonet lens hood is designed for Tamron 28-75mm f/2.8 Di III RXD lens (Model: A036) and 17-70mm f/2.8 Di III-A VC RXD lens (Model: B070). | Replacement: Replaces Tamron HA036 lens hood | Professional Design: The non-glare matte finish inside further prevents or limits lens flare. No vignetting will show | Flexibility: Can be placed backwards over the lens. Allows you to put on a Ф67mm filter & a Ф67mm lens cap | Protection: To prevent moisture or wind-blown debris from entering the lens, and protect the front barrel from the impacts & scratch

Compatibility: The reversible bayonet lens hood is designed for Canon RF 15-30mm F4.5-6.3 IS STM Lens on Canon EOS R RP R3 R5 R5C R6 R7 R10. | Replacement: Replaces Canon EW-73E lens hood. | Flexibility: Ф67mm filter and Ф67mm lens cap are allowed to attach. | Professional Design: Non-glare matte finish on the interior surface to further prevent or limit lens flare. No vignetting with the hood on. | Protection: Protects your lens from accidental impact and the elements.

Include: M2312pk X 2 (4-Pack) compatible with Brother m tape m 231 m231 m-k231s emk231. Black print on white tape. Width: 1/2" (12mm 0.47 inch ) each. Length: 26.2"(8m) each. | Compatible with Brother Ptouch Label Maker: Buyalot replacement for Brother M Tape M-231 M231 M-K231 M-K231S work with PT-45, PT-45M, PTM95, PT-M95, PT-70BM, PT-65, PT-90, PT-80, PT-85, PT-70, PT-55BM, PT-55S, PT-65SB, PT-65SCCP, PT-65SL, PT-65VP, PT-70BBVP, PT-70BMH, PT-70HK, PT-70HOL, PT-70HOT, PT-70SP, PT-70SR, PT-80SCCP, PT-100, PT-110. | Excellent Performance: Our m tape m231 m-k231s emk231 has outstanding durability such as not easy to tear off and water resistant. Relying on the strong adhesive on the label, it can be firmly absorbed on any clean and smooth surface, won't leave a sticky residue if removed. | Easy to Peel: Split backing Design of P Touch M Tape M231 MK231 M-231 M-K231S help you easy to remove the backing when applying as they come with the back pre-cut. | Wide Applications: Buyalot compatible ptouch Non-laminated M label tape M231 M 231 create attractive labels use at home, office, hotel, factory, school and warehouse for labeling files, folders, shelves, books, cabinets, accessories, etc.

Compatibility: The eyecup for Nikon D7500, D7200, D7100, D7000, D5200, D5100, D5000, D3500, D3400, D3300, D3200, D3100, D3000, D750, D610, D600, D300s, D300, D200, D100, D90, D80, D70s, D70, D60, D50, F80, F65, F55, FM10, replaces Nikon DK-20, DK-21, DK-23, DK-24, DK-25, DK-28 | Unique Design: With extended soft silicone part, makes it bigger than the original cup. Protect the viewfinder from impact & scratches, block stray light more effectively | Comfortable: The extended soft silicone makes eyes comfortable, especially for glasses wearers. To protect your glasses from scratches | Easy Installation: With professional design, the eyecup fits the camera viewfinder tightly. Be easy to installation | Materials: Made of premium silicone & ABS plastic, flexible & strong abrasion-resistance

Niceyrig mounting plate 277 is used to mount on the side of gimbal Ronin SC S via two M4 screws | Features a cold shoe mount to support microphone, monitor, flash light, etc. | Comes with multiple 1/4 and 3/8 ARRI locating holes to attach accessories, such as articulating magic arm. | Small size cheese plate for DJI Ronin SC/S, portable to carry | Made of aluminum alloy, durable to last long

Light Up Mouse & Mouse wiggler 2 In 1 -- If you working from home and was tired of being a slave to your computer, this mouse and jiggler in 1 could be your choice, just press and hold the DPI button 3-5seconds to set it on jiggler mode to keep your computer from locking when you have to step away | Random Movements & No Interfere with Using Mouse -- The mouse produces random movements on the screen and it is very quiet in Jiggler Mode, you can disrupt jiggler mode and use as normal without turning off the jiggler but it will resume after 3-5 seconds of idle (Press and hold DPI buttons 3-5 seconds again if you want to turn off jiggler) | Rechargeable Computer Mouse with 4-Adjustable DPI -- This high-precision mouse has 4 levels of adjustable DPI(800-1200-1600-2000)with optical sensors that work on almost all surfaces. Built-in durable rechargeable battery, could be recharged easily with the included USB-C cable. Silent click mouse reduces 90% noises, which makes it an ideal office/home/travel mouse | Plug & Play Perfect for Laptops Only with Limited USB Port -- There is virtually no set up, you literally just plug it in and turn on the switch it works! Only 1 real mouse will be plugged in your computer, no need to buy two devices like a jiggler and a separate mouse, also not bother to buy an adapter if you use using it with your laptop that only has 1 or 2 USB ports | Universal Compatibility & Risk Free 12 Months Warranty -- Compatible with almost all USB-enabled Computers run of Windows XP, Windows 7, Windows 8, Windows 10, Mac OS. And this mouse is backed by 12-months warranty, just let us know if you have any issues with the mouse ordered.

[Compatibility] The full coverage secure Leather airtag holder is compatible with Apple AirTag 2021. (Note: Airtag is not included.) It'll be more durable due to the stainless steel ring locking the Air Tag entrance. | [Genuine Leather] Compared to cheap pu leather or faux leather, our airtag case is made from genuine leather, which is more durable. | [Discreet Design] The air tag holder is designed in Integrated Structure and Double Anti-Loss Structure. The main body is molded from a complete piece of leather. The top position where the metal key ring goes thru is not cut off or separated. The airtag entrance is locked by a metal snap, and an additional little leather loop outside. Perfect to anti-lost for kids, elders and pets. | [Handmade Crafts] The airtag case is hand made and polished by professional craftsmen. Every production process and every product detail is controllable. Never lose the apple airtag tracker orginal beauty while ensuring practicality. | [Intimate Accessories] The airtag accessories set comes with 1 leather airtag holder, 2 key rings, and 1 little stainless steel ring. The 2 different key rings are convenient to choose freely according to your preferences, the stainless steel ring is more durable to lock the entrance to prevent airtag from being lost.

[Compatibility] The full coverage secure Leather airtag holder is compatible with Apple AirTag 2021. (Note: Airtag is not included.) It'll be more durable due to the stainless steel ring locking the Air Tag entrance. | [Genuine Leather] Compared to cheap pu leather or faux leather, our airtag case is made from genuine leather, which is more durable. | [Discreet Design] The air tag holder is designed in Integrated Structure and Double Anti-Loss Structure. The main body is molded from a complete piece of leather. The top position where the metal key ring goes thru is not cut off or separated. The airtag entrance is locked by a metal snap, and an additional little leather loop outside. Perfect to anti-lost for kids, elders and pets. | [Handmade Crafts] The airtag case is hand made and polished by professional craftsmen. Every production process and every product detail is controllable. Never lose the apple airtag tracker orginal beauty while ensuring practicality. | [Intimate Accessories] The airtag accessories set comes with 1 leather airtag holder, 2 key rings, and 1 little stainless steel ring. The 2 different key rings are convenient to choose freely according to your preferences, the stainless steel ring is more durable to lock the entrance to prevent airtag from being lost.

[Compatibility] The full coverage secure Leather airtag holder is compatible with Apple AirTag 2021. (Note: Airtag is not included.) It'll be more durable due to the stainless steel ring locking the Air Tag entrance. | [Genuine Leather] Compared to cheap pu leather or faux leather, our airtag case is made from genuine leather, which is more durable. | [Discreet Design] The air tag holder is designed in Integrated Structure and Double Anti-Loss Structure. The main body is molded from a complete piece of leather. The top position where the metal key ring goes thru is not cut off or separated. The airtag entrance is locked by a metal snap, and an additional little leather loop outside. Perfect to anti-lost for kids, elders and pets. | [Handmade Crafts] The airtag case is hand made and polished by professional craftsmen. Every production process and every product detail is controllable. Never lose the apple airtag tracker orginal beauty while ensuring practicality. | [Intimate Accessories] The airtag accessories set comes with 1 leather airtag holder, 2 key rings, and 1 little stainless steel ring. The 2 different key rings are convenient to choose freely according to your preferences, the stainless steel ring is more durable to lock the entrance to prevent airtag from being lost.

[Compatibility] The full coverage secure Leather airtag holder is compatible with Apple AirTag 2021. (Note: Airtag is not included.) It'll be more durable due to the stainless steel ring locking the Air Tag entrance. | [Genuine Leather] Compared to cheap pu leather or faux leather, our airtag case is made from genuine leather, which is more durable. | [Discreet Design] The air tag holder is designed in Integrated Structure and Double Anti-Loss Structure. The main body is molded from a complete piece of leather. The top position where the metal key ring goes thru is not cut off or separated. The airtag entrance is locked by a metal snap, and an additional little leather loop outside. Perfect to anti-lost for kids, elders and pets. | [Handmade Crafts] The airtag case is hand made and polished by professional craftsmen. Every production process and every product detail is controllable. Never lose the apple airtag tracker orginal beauty while ensuring practicality. | [Intimate Accessories] The airtag accessories set comes with 1 leather airtag holder, 2 key rings, and 1 little stainless steel ring. The 2 different key rings are convenient to choose freely according to your preferences, the stainless steel ring is more durable to lock the entrance to prevent airtag from being lost.

[Compatibility] The secure Leather airtag holder is compatible with Apple AirTag 2021. (Note: Airtag is not included.) It'll be more durable due to the stainless steel ring locking the Air Tag entrance. | [Genuine Leather] Compared to cheap pu leather or faux leather, our airtag case is made from genuine leather, which is more durable. | [Discreet Design] The air tag holder is designed in Integrated Structure and Double Anti-Loss Structure. The main body is molded from a complete piece of leather. The top position where the metal key ring goes thru is not cut off or separated. The airtag entrance is locked by a metal snap, and an additional little leather loop outside. Perfect to anti-lost for kids, elders and pets. | [Handmade Crafts] The airtag case is hand made and polished by professional craftsmen. Every production process and every product detail is controllable. Never lose the apple airtag tracker orginal beauty while ensuring practicality. | [Intimate Accessories] The airtag accessories set comes with 1 leather airtag holder, 2 key rings, and 1 little stainless steel ring. The 2 different key rings are convenient to choose freely according to your preferences, the stainless steel ring is more durable to lock the entrance to prevent airtag from being lost.

Ideal viewfinder eyecup eyepiece for Fujifilm X-T5 X-T4 X-T3 X-T2 X-T1 X-H2 X-H2S GFX50S II GFX50S GFX100 GFX 100S X-H1 | Replaces Fuji EC-XTL, EC-XTM, EC-XTS, EC-GFX and EC-XHW eyecup | Blocks light and helps you concentrate on taking photo | Protects viewfinder from impact and scratches | Soft silicone material for eye comfort, ease your eye/eyeglass hitting on viewfinder incautiously

Ideal viewfinder eyecup eyepiece for Fujifilm X-S20 X-S10 X-T200 | Easy for Installation | Blocks light and helps you concentrate on taking photo; Protects viewfinder from impact and scratches effectively | Soft silicone material for eye comfort, ease your eye/eyeglass hitting on viewfinder incautiously | Notice! When using this eyecup, flipping the screen may have an impact on the eyecup.

[Compatibility] The full coverage secure Leather airtag holder is compatible with Apple AirTag 2021. (Note: Airtag is not included.) It'll be more durable due to the stainless steel ring locking the Air Tag entrance. | [Genuine Leather] Compared to cheap pu leather or faux leather, our airtag case is made from genuine leather, which is more durable. | [Discreet Design] The air tag holder is designed in Integrated Structure and Double Anti-Loss Structure. The main body is molded from a complete piece of leather. The top position where the metal key ring goes thru is not cut off or separated. The airtag entrance is locked by a metal snap, and an additional little leather loop outside. Perfect to anti-lost for kids, elders and pets. | [Handmade Crafts] The airtag case is hand made and polished by professional craftsmen. Every production process and every product detail is controllable. Never lose the apple airtag tracker orginal beauty while ensuring practicality. | [Intimate Accessories] The airtag accessories set comes with 1 leather airtag holder, 2 key rings, and 1 little stainless steel ring. The 2 different key rings are convenient to choose freely according to your preferences, the stainless steel ring is more durable to lock the entrance to prevent airtag from being lost.

Compatible Vehicles of Screen Protector: It is compatible with BMW G20 328i/330i/335i/340i 2019-2022 and G22 428i/430i/440i 2021-2023. | Advanced protective film: Advanced anti-explosion effect, strengths the hardness to 9H, enables to mitigate the wallop and prevent from scratching. It does not cause fragmentation and damage to the human body and the screen even if it ruptures, and still remain the whole one piece. | Upgraded Tempered Glass Screen Protector : The effect of anti-fingerprint has significant enhanced by contrast the traditional screen protector. No longer fingerprint leaves on the screen protector. | Easy Installation: Aligning the four corners and install it, then film can be effectively installed to the screen, without any air bubbles leaving. | Great Structure: The foil could always keep wet and have a smooth touch feel, in addition, it can reduce the glare due to there is a layer of scrub coating.

【Extensive Compatibility】: Two non-slip adjustable straps secure most wireless Bluetooth speakers with 7.5" - 12.5" circumference.Such as JBL Flip/Charge/Pulse/OontZ Angle/Anker/Doss/AOMAIS/Bose,etc.You can also hang some accessories like drinks, Water bottle, radio, etc. | 【Securely Mounted 】 : Three non-slip adjustable straps securely hold the Bluetooth speaker to the 4"-6" circumference rails, bars, and frame without worrying about dropping it. | 【Quality Material】: Made of high quality PU leather material and processed through precise sewing crafts. Adapt PE bar to be used for main body to prevent speaker mount from bending deformation, prolong the service life of speaker mount.Half inch padding cushions speaker and prevents rattling. | 【Hands Free】: Easily attach Bluetooth speakers to the rails of golf carts, boats, UTVs, bicycles, baby carts, strollers, carts, beach umbrellas, electric scooters, etc. and enjoy music anywhere, anytime. | 【Packing List】: 1 Speaker Mounting Straps, Speaker not included.

Compatible with: 2022 2021 2020 2019 2018 MacBook Air 13 inch with Retina & Touch ID, MacBook Air M1 chip, Model: A1932 / A2179 / A2337. -MGN63LL/A, MGND3LL/A, MGN93LL/A, MGN73LL/A, MGNE3LL/A, MGNA3LL/A, MWTJ2LL/A, MVH22LL/A, MWTL2LL/A, MWTK2LL/A, MVH52LL/A, MVH42LL/A, MVFH2LL/A, MVFM2LL/A, MVFK2LL/A, MVFJ2LL/A, MVFN2LL/A, MVFL2LL/A, MRE82LL/A | Smooth Soft-Touch Finish :Hard Shell Case with Rubber oil Paint for Rich Silky-smooth Soft-touch while Protecting your MacBook from everyday scrapes and scratches. | Access to all Ports: Case Design lets you Open/Close your MacBook all the way and Access to all Ports.*Crafted with vent slots to ensure proper heat dissipation.*No Apple Logo cut out design. | WARNING: This case can NOT fit old Macbook Air 13" Model A1466/A1369, Do NOT for MacBook Pro. | Please double check your MacBook's model number "Axxxx" on the bottom of the laptop to determine the compatibility. ONLY for Model A1932 / A2179 / A2337.

【Compatibility】Designed for Ring Stick Up Cam & Ring Indoor Cam(1st Gen), also fit for Eufy Cam, Roelink Argus, Arlo Camera and other cameras with standard 1/4 threaded hole. | 【Clamp Anywhere You Want】Clamp up to 2.0 inches thickness,with extra long 15.7-inches gooseneck arm. It can be easily mounted to shelves,furniture frames,windows,poles & tree branches, etc. | 【Perfect View Angle】360-degree angle adjustment allows you to adjust your camera to your desired angle. | 【Absolutely Stable】Strong and sturdy clamp arm is made of high quality aluminum-magnesium alloy, stable enough to hold your camera securely.And the clip headband with foam mat can prevent your furniture from scratches. | 【Lifetime Service】ALERTCAM provides Lifetime warranty. Any problem, just feel free to contact us, we'll reply to you within 12hours and spare no efforts to satisfy you.

✔ Designed for Blink XT / XT2, Blink Mini, All-New Blink Outdoor/Indoor Home Security Camera. | ✔ No drilling and no tools needed. Just attach it to your blink camera then roll it into the seam in vinyl siding. | ✔ Made by aluminum alloy material, durable and rust-proof, can stand any harsh weather. | ✔ Easily adjustable and flexible to position your blink camera, can angle your camera 360-degree. | ✔ Lifetime warranty. Any problem, just feel free to contact us for help, we'll spare no efforts to satisfy you.