1.Dimension of Module: 12.8X3.3X1.3cm(5.04X1.3X0.51in) | 2.64 fixed screw holes with 3mm in its diameter | 3.A single module can drive a 8x 8 dot matrix common cathode | 4.Equipped with input and output interfaces, support for multiple modules to cascade | 5.MAX7219 Dot Matrix Module Red Light for Arduino Microcontroller 4 in 1 Display with 5pin Line

SUPER PROTECTION - Featured with high quality non-itchy silicone coated fiberglass and super shielding metallic fiber, provides signal blocking functions as well as stands up the temperature up to 1832℉（1000℃） | LARGE CAPACITY - 9.8"X11".fits tablets, cell phones, radios, GPS units, key chain attachment, it’s portable and easy to carry. | CONVENIENT TO USE - Putting ID card, bank card such as IC magnetism card into the faraday bag, it can avoid magnetism lost and info leak. | WATER RESISTANT - Not only does our bag stand up against fire, but it's also highly water resistant just in case it gets wet for any reason. | PROTECT YOUR CAR - Your signal can be hacked from your fob if you have keyless entry on your car and a carjacker can steal your car without you knowing it, but this faraday bag will stop the signals from being hacked

HYS Dual band UHF/VHF 144/430MHz 2meter/70cm mobile transceiver antenna. | Connector type: SL-16 J (Male)/PL-259 | Dual Frequency 144/430MHz;Gain:2.15dBi (144MHz) ,2.5dBi(430MHz) | Length: 12.5inch | Each antenna will be tested more than threes times, all our product made of high quality material and provide excellent performance! we also provide 30 days no reason to return

Boost Signal: HYS 771FG tactical antenna made by high quality material, which can boost the signal for your device. | Tactical Design: antenna is foldable, when you're not using your device, you can easily store it. What is more, with a gooseneck, You can adjust any angle you like. | Compatible with AnyTone, BaoFeng, some Wouxun, and some Kenwood Walkie Talkie; Working for baofeng model number:GT-3, UV-5R, UV5RE, UV5RA,UV5R Plus UV-82L , BF-888S.etc | Specification:SMA-female Connector; Dual Band,144/430MHz; 18.7Inches; 2.15/3.2dBi and Max 20Watt input power. | The antenna is suitable for hunting hiking camping outdoor work. What you get: 1PCS HYS TC-771FG SMA-Female Antenna.

The HYS CB Antenna can increase the radio signal reception capacity. In addition, due to the high gain, the antenna can also enhance your radio’s signal transmitting ability, can greatly improve the signal transmission distance | Frequency: 27Mhz Max Power: 20Watt | Length: 16.1inch Connector: BNC V.S.W.R: LESS1.5 Polarization:Vertical | Compatibility For Cobra HH38WXST HH50WXST HH50 MRHH350FLT C75WXST Midland 75-822 75-785 MHS75 Uniden BC75XLT PRO401HH BC125AT | What you get: 1PCS XP-70 BNC CB Antenna. If you any technical or unsatisfactory problems, plz contact us by clicking “RADIO MAX” that below the "Buy Now", and find the button "ask a question"

1 In 2 Out PoE extender: STEAMEMO PoE extender extends power and data to 2 terminal PoE device through an exterior network data cable(Cat5,Cat5e,Cat6,Cat6e,UTP cable). Delivers the correct wattage to power your PoE devices through auto-sensing(Please note: only support 48V POE devices) | 250M Extension: When the extension mode is on, the extender will be extended from 100M distance to 250M at the speed of 10Mbps.More convenient for your using(Better to use CAT5 cable or more). Connect PoE extender with NVR for powering long distance IP camera, simplified your network cabling. | Reliable Waterproof and Beautiful Appearance Design: Compact Size, Easy To Install, Support Outdoor Use, Windproof And Rainproof, The Shell Uses Uv Sunscreen And Antiseptic Materials, And The Product Has A Longer Service Life | PoE Powered: STEAMEMO PoE Extender Supports 10/100Mbps data rates, comply with IEEE 802.3af/at Standard. It can supply 2 PoE 15W ouput when powered by IEEE 802.at source. Plug and play, no additional power supply required. No external power required. | Widely Use: The extender features a convenient wall mountable design for installation flexibility, Durable and waterproof. STEAMEMO PoE Repeater with design of 4KV lightning protection can be used in outdoor harsh environment -40℃~+70℃(-40°F to 158°F). Ideal for small installations of Security Camera CCTV Surveillance, greatly extending the network signal transmission as well as power supplying distance | After-sales service: Electronic products will have various unexplained failures. We provide one-year after-sales service for renewal. Within 1 year from the order, only replacement is not repair

★Compatible With★-- This case works with Crucial X6/X9 Pro/X10 Pro 1TB/2TB/4TB/500G Portable SSD and small accessories.(For sale is Case Only, the device and accessories are not included) | ★Super Materials★ -- Made of supreme quality EVA and 1680D Materials, the case is sturdy and durable for use. It provides a great protection for portable SSD and other accessories | ★Compact Design★-- The compact case is divided into 2 rooms for portable SSD And cables which can separately keep SSD and accessories safe and organized. | ★Easy Carrying★-- A durable carabiner is convenient for you to carry,The compact design allows you to put it in your backpack,luggage on the go. | ★Quality Assurance★-- Compared to the traditional EVA, our case is made of eco-friendly materials.All our products are using qualified Materials,which Rohs certificated! Hard shell with two-year assurance.

Filter out Blue Light and relieve computer eye strain to help you sleep better. | Actual Screen Protector dimensions are 11.6 inch measured diagonally. 10.12 inch width x 5.71 inch high. Aspect Ratio 16:09. Please compare your monitor to our measurement picture before purchasing. | Block Blue light at wavelength at 380nm-490nm. | Easy to apply and remove. This package includes 3 screen protectors and an installation kit. | Protects screen against scratches and Anti Glare function.

❤Perfect Fit- Custom designed for Sony ZV1F ZV-1F /ZV-1 II vlog camera; The silicone case is made according to the real Sony ZV1F camera with precise cutouts. Every incision in the silicone sleeve is accurate, you can easy access to all featured buttons and functions, such as microphone, earphone, tripod and other external ZV-1F ZV-1 II accessories. | ❤Soft Silicone Material - This Sony ZV1F case is made of high quality soft silicone. Anti-bending material allows you to knead freely. This silicone case is non-slip and not easy to damage, which will protect your ZV-1F camera from scratches, damages and dirt. | ❤Enhance Grip - This ZV1F ZV-1 II silicone case can enhance the grip of your camera. It can be used as camera grip when using your camera. Designed for efficient photography, you can access all ZV-1F ZV-1 II peripheral ports, card slots, buttons, and connect with tripod | ❤Convenient To Use - Special design make you can freely to flip the ZV-1F ZV-1 II camera screen and easy to install. There is a battery opening at the bottom, you don't need to take off the silicone case when you change battery or SD Card. You also don’t need to take off it when you connect tripod or data line, avoiding frequent disassembly | ❤Super Lightweight - It protects your sony ZV1F ZV-1 II camera without adding too much weight. Light weight and fashion appearance, perfect for vlogs, everyday videos, short films, etc. You can take out the camera with the silicone case and record beautiful moments in your life. Available in rich color, you can choose your favorite from 11 colors.

✅The civic radio wiring adapter harness compatible with Honda Fit 2007-2008, Civic 2006-2011, CR-V, 2007-2010, Odyssey 2008-2010, Pilot 2009-2011. | ✅Radio wiring harness for pilot replacement for Acura NSX 1991-1996, RL 1996-1998, TL 1996-1998, Vigor 1992-1994, RDX 2007-2015 Non-Navigation, Legend 1989-1996, Integra/CL 1996-2001. | ✅Easy to use. Car Radio Wiring Harness for Honda Without cutting any OEM wiring harness, antenna adapter plug and play. The cr-v radio wiring harnesses use standard color-coded wires. Pre-stripped to making it easier to install the wiring harness. | ✅The pilot radio wiring harness adapter is made of professional copper core material for the safety and durability. | ✅The radio harness odyssey allows for the installation of an aftermarket radio using the existing factory wiring and connectors. NOTE: Radio antenna adapter NOT compatible with factory amplified systems, NOT work for premium audio radio.

Package includes: 5-Pack replacement for dymo letratag refills white plastic 91331 label tape. Color: Black on White; Width: 1/2 inch (12mm) each; Length: 13 feet (4m) each. | Compatible with Dymo Label Maker Machine: LetraTag LT-100H, LT-100T, LT-110T, LT-200B, QX50, XR, XM, 2000, Plus LT-100H. | Easy to Peel: Replacement for dymo white plastic label refill 12mm x 4m 1/2 x 13 have split-back design that make it easy to peel off the backing. And no sticky residue remains when the label maker tape are removed. | Our compatible dymo letratag label maker refills are water resistant. They can be used in moist environment. You can label shampoo and conditioner bottles for the shower. | Wonfoucs replacement for dymo label maker refills are perfect for indoor, help to organize your daily job easily.

Adjustable 3- Way Pivot Arm Assembly Extension Adapter Mount +Same Direction Straight Joints Mount+ Thumb Knobs for HERO 10, HERO 9, HERO 8, HERO(2018), HERO 7,6,5 Black, HERO4, HERO3+, HERO3, HERO2, Go Pro Session, DJI Osmo Action, AKASO, Campark, YI Action Camera and More | The Go Pro extension arm are made of high quality aluminum alloy, rustproof, rugged and durable | Action cameras Accessories Kit Extension Arm Adapter Pivot Arm Thumbscrew Same Direction Straight Joints Mount | Universal straight joint Arm Mount Set, Action cameras Accessories Kit, Extension Arm Adapter Pivot Arm | Grab bag included 1 long Same direction Pivot Arms mount +1 short Same direction Pivot Arms mount + 1 long thumbscrew

✔ Compatible with Eufy Security Solo IndoorCam P24 and S220, also fit for other cameras with standard 1/4 threaded hole such as Eufy Cam 2C, Arlo Camera, Roelink Argus and etc. | ✔ 360-degree adjustable angle allows you to get a better view that you desired. | ✔ Easy installation with screws or 3M VHB tape, two mounting ways for your choice. (Note: After the adhesive tape, wait for at least 24 hours before installing the camera.) | ✔ Made of high quality material, sturdy and safe, strong adhesive 3M sticker or screws ensure that the camera will not fall off. | ✔ Lifetime warranty for all our products. If any problem, feel free to contact us for 100% full refund or new replacement.

Hermitshell Hard Travel Storage Carrying Case Bag | Protect your favorite device from bumps dents and scratches | Made to fit Logitech Spotlight Advanced Presentation Remote | Material:EVA ,Color: Black, Internal size: 6x 1.2 x 0.6 inch | For sale is case only (device and accessories are sold separately)

Fits Honda 2008-2011 Accord, 2010-2011 Crosstour, 2009-2012 Pilot Models

【High Quality Made】The white mist filter made of high-quality aviation aluminium and HD optical glass.Only 3.2mm ultra-slim frame keeps it lightweight and avoids vignetting and dark corners.And the transmission is up to 90% which ensure the high-definition images and videos. | 【Dreamy Fog Effect】The soft focus filter uses a special glass with evenly-spaced droplets texture to produce a foggy effect. It can halates direct light sources,reduce the contrast, soften the picture, making the overall more integrated and natural, create a hazy and romantic atmosphere. | 【Special Light Diffusion】The white diffusion filter softens & blooms the image highlights, add a soft glow around light source,create a mysterious, charming and cinematic effect. | 【Refine the Skin】The white mist diffuser helps smooth and soften any blemishes, wrinkles, or imperfections in the subject's skin, as well as adding a dream-like glow. It is ideal for portrait. | 【Comprehensive & Compatible】There are 2pcs white mist filters, Light-Soft 1 and the stronger Medium-Soft 2. The filter compatible with all 49mm camera lens.Please verify your camera's lens thread size before ordering. e.g ø49mm.

5.5 MM x 2.1 MM Dc Jack Female 10V: Threaded 10V 30V high current metal dc female receptacle plug; Mount Hole Diameter : 11mm;Total Size : 16 x 17mm/0.63" x 0.67"(D*H) | Male & Female dc Jack with Cable 5.5mm x 2.1mm,Durable: High Quality Metal Copper Material 2.1 5.5 jack, Insulation flame retardant,Fast conduction | High Quality Lsgoodcare 5.5MM x 2.1MM dc power pigtail cable 12v male connectors, make of inner core pure copper, good conductivity; premium pvc anti-aging material, durable | Dc Power Pigtail Cable Connection Are Easy to Use: black: negative - ; red : postive +; cctv pigtail connector for cctv security camera, audio, tv ect | Package Include: 5.5 x 2.1 mm dc barrel jack panel mount connector female with cable &5.5 x 2.1mm dc pigtail cable male

S0-239 UHF female connector.Used for connecting two PL-259 connectors together. | Nickel plated and designed to offer the lowest VSWR rating of the two series | Size : 27 x 15mm/1.1" x 0.6" (L*D) | Commercial Grade UHF Series Adapters Nickel-Plated Machined Brass Construction | Package Content: 5 x UHF SO239 Female to Female Connector

【HC-05 Bluetooth Module】The HC-05 module is an easy to use Bluetooth V2.0 SPP (Serial Port Protocol) module, designed for transparent wireless serial connection setup.Note: The module doesn’t suitable for IOS system. | 【Master and Slave 2-IN-1 HC-05 Module】Working Voltage 3.6V to 6V, Default baud rate: 9600,Default pin:1234. Button: Press the button, the module enter the AT mode, AT commands are executed only in AT mode. | 【Serial Communication】HC-05 is able to operate in both master and slave mode. Its communication is via serial communication which makes an easy way to interface with controller or PC. It's ideal replacement to your wired serial connection. | 【HC-05 Wireless BT Module】with this HC-05 Bluetooth module,You can quickly add the Bluetooth feature to your project, and then you can use your android phone to control some gadgets, such as: switch, LED. | 【6 PIN Dupont Cable】with this Dupont Cable, you can easily connect this HC-05 Bluetooth module to your board

*Impedance:8 Ω *Max Power: 5 Watts | *The length of Cable:1.8M With 3.5mm Mono Plug | *Size:80x 67x44mm | *Swivel Bracket | *This Speaker is suitable for Mobile Transceiver (Ham Radio / CB Radio)

【MAXIMUM HAND-FEELING】Modern contoured shape, sweat-resistant and skin-friendly finish are for maximum comfort and support. The thoughtful ring and little finger rest provide extra comfort. The sturdy scroll wheel with rubber makes sure that your hand will not slip when scrolling. | 【PLUG & PLAY SUPER EASY TO USE】Really plug & play design, no drivers need to be installed. 2.4GHz wireless transmission technology provides a powerful and reliable connection up to 43.0ft. Portable design make it easy to store in bag. It's the best mouse for gifts. | 【STRONG DURABILITY & LONG WORKING DISTANCE】Passed 6,000,000 times keystroke test to guarantee extra durability. 2.4GHz wireless technology and professional chip ensure longer working distance. | 【EXTREMELY LOW POWER CONSUMPTION】It takes 2 AAA Batteries(NOT Included) to operate memzuoix wireless mouse, and it will turn to sleep mode in 7mins of inactivity for energy saving, can be easily activated by clicking any buttons. | 【WIDE COMPATIBILITY】Well compatible with Windows 7/8/10/XP, Vista 7/8, Mac and Linux etc. memzuoix cordless computer mouse for Laptop, Desktop, PC, Macbook, and other devices. memzuoix wireless mouse enjoys 45 days money-back and a 365-day worry-free warranty. Notice, the side buttons are not available for Mac OS, but the other function can be used normally.

Soft silicone for Comfort & Protection | The extended-length of the soft, thick silicone conforms to the shape of your eye to create a tighter and more comfortable fit whether you're shooting with the naked eye or wearing glasses | Helps block unwanted stray light from the viewfinder, resulting in better contrast, reduced glare, and an overall enhanced user experience | Easy Slide-on and Click Installation | An upgraded eyecup over the standard camera's original eyecup, its increased depth is nice for blocking more light outdoors, and helpful for keeping nose smudges off the LCD screen

【Float Better】The special designed floaty body of the handler makes your GoPro including LCD Touch BacPac, Battery BacPac float better than ever and prevents Go Pro from sinking, so you can shoot in or around the water without any worry. | 【High Quality】 Comfortable, textured non-slip grip handle construction for a secure and tight grip. The special TPE-Rubber pole is neither as sticky as ordinary rubber, nor as easily corroded by seawater as a foam handle. Bright orange piece is easy to spot if you ever drop it in the water. | 【Multi Purpose】The watertight hollow compartment of the floaty handheld monopod can be used as storage for your valuable small items to waterproof, or to achieve neutral buoyancy during underwater activities. Easy to install without any other mount accessories. | 【More Convenient】Enables more stable footage than holding the camera by hand. Makes it easy to aim your camera and capture a bunch of different angles. Perfect for photography during deep sea, swimming, surfing, diving, snorkelling, scuba diving and other water sports activities. | 【Wide Compatibility】Compatible with Go Pro Max, Hero9 Black, Hero8 Black, Hero7 Black, Hero7 Silver, Hero7 White, Hero6, Hero5, Hero4, Session, Hero3+, Hero3, Hero2, Hero1, Hero (2018), Fusion, SJCAM, YICAM, AKASO, DJI OSMO action camera. Wrist strap lanyard included for extra security.

Ideal viewfinder eyecup eyepiece for Fujifilm X100V | Blocks light and helps you concentrate on taking photo | Protects viewfinder from impact and scratches | Also protects hot shoe mount from scratches and oxidization | Soft silicone material for eye comfort, ease your eye/eyeglass hitting on viewfinder incautiously

Provide Outstanding Improvement of Underwater Footage: This professional 3 in 1 diving filter enhances colors and improves contrast in various underwater video and photography conditions. | Direct Snap-on Attachment: Easily snap on / off the filter to the GoPro Super Suit housing case. PLEASE NOTE: These filters need to be used with original GoPro super suit housing case or SOONSUN housing case, It can't be used on the camera's lens directly, and it does not compatible with 3rd party housing case. | Reserved Slot for Tether: In case of loss, loop the included safety tether to the side of the slot. | Includes Red filter x 1, Light red filter x 1, Magenta Filter x 1, Safety tether x 3, Drawstring bag x 1. | Compatible with GoPro original Super Suit housing for HERO 5/6/7 Black, HERO(2018) and SOONSUN waterproof housing case. Not fit for third party housings.

【Arca-Swiss quick release plate】Straight-grain knobs (non-apron design, no idling). Compared with ordinary quick release boards, it is more slip resistant and anti-dropping. Compatible with Arca-Swiss standard quick release plate of Manfrotto be free. ※Clamping range: 40-45mm | 【Build In Bubble Level】There are three levels of level included (both sides of the quick release plate & the side of the locking knob), to help you perceive your position more accurately. | 【Corrosion resistance & anti-skid】 The quick release plate is made of high-strength aluminum alloy material, which has undergone anodized surface treatment, which is corrosion-resistant and wear-resistant; it has a non-slip function, which can well protect the camera. ※L-shaped inner hexagonal small wrench is included. The design is simple and light. Both ends of the (wrench) can be used. | 【With ruler & 3/8 to 1/4 screw】you can use the attached 1/4 screw to directly connect to a tripod/monopod for indoor and outdoor photography. | 【Size & Product List】1xMount:7.6x5cm,1xQuck release plate:3.7x5cm,1xHexagon wrench

This case is compatible with Samsung Galaxy Tab A 10.1 with S Pen (SM-P580/SM-P585) Tablet. It will not work for Samsung Galaxy Tab A 10.1 (SM-T580/T585/T587) and any other model device. | Compact lightweight hardback with premium quality PU leather front cover. Soft scratch-free microfiber interior adds comfort and an additional layer of protection. | Magnetic closure. Easy clip-on application and accessible to all features and controls smoothly. This is an one-piece case, the front and back does not separate. | Cover has flip capability to transform the case into a viewing stand and keyboard stand. | Available in a variety of bright and fun colors.

Durable PU Material Case. Made of PU material and high quality Semi-hard EVA, Provides excellent protection. | Perfect Storage. Can fit Canon IVY Wireless Bluetooth Mobile and Photo Paper. Protect your Photo Printer out of Scratches. | Wrist Strap. Includes detachable wristband for easy carrying for your comfort. You can carry it anywhere. Compact size and easy to use. | Shockproof Soft Lining. Shockproof soft lining interior, The antistatic, shock absorbing, protection against minor bumps, etc. | External dimension: 5.9" x 3.93" x 1.9" inch. (L * W * H) Internal dimension: 5.19" x 3.3" x 1.2" inch.(L * W * H). Compatible with Canon IVY Mobile Mini Photo Printer, Canon IVY CLIQ Instant Camera Printer, Canon IVY CLIQ+ Instant Camera Printer, Canon IVY CLIQ 2 Instant Camera Printer, Canon Ivy CLIQ+ 2 Instant Camera Printer and Canon ZINK 2" x 3" ZINK Photo Paper Pack.

【High Quality】Professional manufacturing, exquisite workmanship, this Camera Lens Adapter is made of high quality aluminum alloy, durable, non deformation, also with corrosion resistant and glossy.Extinction method: professional-grade lens matt paint on the inner wall .External coating: black part hard oxidation process | 【Unique Design】AMOPOFO Transform caliber adapter ring, can be mounted to the front of the lens to achieve different diameter share the same lens diameter filter, lens hood, additional lens and other accessories. The purpose is to increase the diameter of the lens. Besides for making financial sense, this allows you to use your favorite lens across different size UV,ND,CPL , the lens adapter is designed to fit securely to the lens, yet can still be removed easily when not needed. | 【Suitable】Canon,Nikon,sony,Fuji,Sigma, Tamron Camera Compatible with all 58mm camera lenses & 72mm accessories. Your lens thread size will be printed underneath your lens cap or written somewhere on the lens barrel. Make sure you order the correct size otherwise it will not fit your lens. | 【Product Description】:The first number of an adapter ring is always the lens thread size, the second number is the filter size of the accessory. If the first number is bigger, it's a step-down ring What is a step up ring? Step up rings, also known as adaptor rings, allow you to use filters and accessories that are not the same size as your cameras lens. Lenses a ND UV CPL come in a large range of types and sizes and unfortunately they don't always fit together correctly. | 【Note】 Why Choose AMOPOFO Brand Concept？ professional camera accessory manufacturer. Dedicated to provide products in high quality & good price. Made of metal sealing ring, much tighter. Laser fonts, much durable Meet

【High Quality】Professional manufacturing, exquisite workmanship, this Camera Lens Adapter is made of high quality aluminum alloy, durable, non deformation, also with corrosion resistant and glossy.Extinction method: professional-grade lens matt paint on the inner wall .External coating: black part hard oxidation process | 【Unique Design】AMOPOFO Transform caliber adapter ring, can be mounted to the front of the lens to achieve different diameter share the same lens diameter filter, lens hood, additional lens and other accessories. The purpose is to increase the diameter of the lens. Besides for making financial sense, this allows you to use your favorite lens across different size UV,ND,CPL , the lens adapter is designed to fit securely to the lens, yet can still be removed easily when not needed. | 【Suitable】Canon,Nikon,sony,Fuji,Sigma, Tamron Camera Compatible with all 82mm camera lenses & 62mm accessories. Your lens thread size will be printed underneath your lens cap or written somewhere on the lens barrel. Make sure you order the correct size otherwise it will not fit your lens. | 【Product Description】:The first number of an adapter ring is always the lens thread size, the second number is the filter size of the accessory. If the first number is bigger, it's a step-down ring What is a step up ring? Step up rings, also known as adaptor rings, allow you to use filters and accessories that are not the same size as your cameras lens. Lenses aND UV CPL come in a large range of types and sizes and unfortunately they don't always fit together correctly. | 【Note】 Why Choose AMOPOFO Brand Concept？ professional camera accessory manufacturer. Dedicated to provide products in high quality & good price. Made of metal sealing ring, much tighter. Laser fonts, much durable Meet

The big bag internal dimension is: 13.58 x 0.79 x 9.64 inch (L x W x H); external dimension is: 13.97 x 0.79 x 10.04 inch (L x W x H). The additional small pouch bag internal dimension is: 5.71 x 0.59 x 5.12 inch (L x W x H); external dimension is: 6.3 x 0.59 x 5.31 inch (L x W x H). | Features a neoprene foam padding layer and fluffy fleece fabric lining for bump and shock absorption and protection of your computer from accidental scratches. | Additional small storage pouch bag for you to storage laptop mouse and earphone. Same color as the big sleeve bag, harmony and stylish. This protective carrying sleeve case cover bag with small pouch is ideal for you to take your laptop out. | Slim and lightweight; does not bulk your laptop up and can easily slide into your briefcase, backpack or other bag. Top-loading zipper on the sleeve glides smoothly and allows convenient access to your laptop computer. | Compatible with MacBook Air 13 inch A1369 A1466 2010-2017/Pro 13 inch A1425 A1502 A1278 2008-2015; Surface Book 3/2/1 13.5, Surface Laptop 3/2/1 13.5; Dell Inspiron/Latitude 13/14; HP Elitebook 830/Spectre X360 13.3, HP Envy/Stream/Pavilion 13/14; compatible with Lenovo 720 13.3/Yoga 2 Pro/Yoga 920, ThinkPad X1 Carbon 14, Ideapad 320s-14/320s-15, IdeaPad 710S/720S 13/14; compatible with Asus Chromebook/Vivobook/ZenBook Flip S 13.3/14; Acer Swift1/7 /Spin 5 13.3, Acer Swift5/Spin7 14.

Soft silicone for Comfort & Protection | The extended-length of the soft, thick silicone conforms to the shape of your eye to create a tighter and more comfortable fit whether you're shooting with the naked eye or wearing glasses | Helps block unwanted stray light from the viewfinder, resulting in better contrast, reduced glare, and an overall enhanced user experience | Easy Slide-on and Click Installation | An upgraded eyecup over the standard camera's original eyecup, its increased depth is nice for blocking more light outdoors, and helpful for keeping nose smudges off the LCD screen

The digital light meter will allow you to measure the lighting in an area | The digital light meter uses a 9V battery(not included); Accurate up to 200,000Lux +/- 5% | Resolution: 0.1Lux / 0.01Fc, Accuracy:±4%,Measurement speed: 2 times / second,Units: Lux & Fc | Hold function, Auto range & Manual range,Auto Power OFF: After approx.15 minutes | Low power of battery detecting,Operating Environment: 14 to 122℉(-10 to 50℃), 10%~90%RH

Connectors 1- standard CPU 8 pin EPS-12V female (connect to power supply 8 pin EPS) . Connector 2 - 2x EPS-12V 8(4+4) pin male (connect to Motherboard 8(4+4) pin EPS) | This cable splitter is designed ONLY for Motherboards with CPU 8 pin, CPU 8+4 pin or dual CPU 8 pin EPS 12V connectors. This will expand the capabilities of your power supply to meet higher demand - server & overclocking motherboards; | A female end to connect to the CPU power connector of the power supply and two CPU male ends to plug into the Motherboard; | Cable Length Including Connectors:(Approx):9 inches ;Gauge: standard 18AWG - UL1007 ;Genuine new copper cores, no recycled materials; | ATTENTION PLEASE: the product is supplied ONLY in the exclusive packaging of the manufacturer - the brand name "TeamProfitcom"- as shown in the product photo. You get the right and good quality products guaranteed by our brand "TeamProfitcom"

High grade copper wire and silver plated connectors | Designed for very fast signal transfer rate | Professional High Quality spring PC sync cable | 14 inch coiled cable stretches to approximately Max 54 inch | It has a screw lock, the cable can be locked with the PC socket of the camera

BAY Direct Thermal Paste perfect for CPU,VGA,LED,Chipset and other PC components. | Helps the heat dissipation from a CPU to a heatsink. | Non-volatile, Non-corrosive, Non-toxic and odorless | High conductivity for heat transfer.High stability and reliability | Flame retardant

INTERNAL MINI SAS DATA CABLE connects a RAID or PCIe controller with an SFF-8087 port to 4 discrete SATA drives; Mini SAS to SATA adapter provides reliable internal connectivity between a Serial attached SCSI controller card in a computer system and direct attached storage devices with a SATA connector | LEVERAGE HARDWARE RAID PERFORMANCE with this SATA multi-lane cable; Two cables can connect up to 8 SATA drives to span RAID controller arrays and share performance across two PCIe 2.0 x8 lanes with compatible host bus adapters; Supports up to 6Gbs data transfer rate per drive | DIY OR PRO INSTALLERS both appreciate the convenience of a forward fan-out cable with an internal mSAS connector when expanding storage needs; 3 foot cable harness of SAS to SATA cable provides sufficient length for internal cable management; Slim ribbon cables minimize airflow impact in a computer case | FLEXIBLE DESIGN of SAS breakout cable includes acetate cloth tape over slim ribbon cables for strain relief to protect cables without rigidity; Woven mesh sheath covers half of the cable for easy routing; P1 to P4 markers provide easy ID after installation; Low profile SATA connectors have easy-grip treads with stainless steel latches to prevent accidental disconnection and reduce vibration disconnection | SFF-8087 COMPATIBLE with popular RAID cards such as 3Ware 9650SE-8LPML RAID, Adaptec ASR-5805/512MB SAS RAID / 2258200-R 5405 RAID / 2258500-R 51645 RAID, Dell PERC H700 Raid / PERC H200, Dell PowerEdge 8-port SAS SATA Controller / PERC H310, HighPoint RocketRAID 2720 / RocketRAID 620 / RocketRAID 4520 / RocketRAID 4522, LSI Logic SAS9211-8I HBA Card, StarTech.com PCI Express RAID, Syba 4-Port RAID HyperDuo / PCI Express SATA II 4 x Ports RAID, Supermicro AOC-SAS2LP-MV8 8-Channel SAS/SATA

Model: HA9010H12F-Z | Voltage: DC 12V Current: 0.57A | Fan interface to the Graphics card: 4 pin female connector | Mounting holes distance: approx. 40mm * 40mm * 40mm | Cooling Fan Size: approx. 85 mm * 12 mm (Diameter * Height)

Ideal viewfinder eyecup eyepiece for Fujifilm X-T30 X-T20 X-T10 | Blocks stray light from entering the viewfinder, helps you concentrate on taking photo | Protects viewfinder from impact and scratches effectively | Soft silicone material for eye comfort, ease your eye/eyeglass hitting on viewfinder incautiously | Mounts easily and securely via the camera hot shoe