Specially designed for Sony Walkman NW-A306. | High Quality: made of high quality synthetic rubber. | Full Protctive Case Features: shockproof & anti-shock & dirtproof & mpact resistant. | Snap-on Installation: easy operation to apply and remove, without any tool needed. | Perfectly Fit: precise cutouts; easy access to all vital ports and buttons.

GLOTRENDS Wi-Fi 5 AC1200 PCIe Wi-Fi adapter is based on Intel 7265, which is fully compatible with the latest IEEE 802.11 AC standard and Bluetooth 4.2 technology. Backward compatible with Wi-Fi 5/4 standard. | With the Wi-Fi 5 features:1) Dual band 2.4GHz/5GHz spectrum; 2) DL MU-MIMO; 3) 256-QAM Modulation; 4) OFDM; 5) WPA 2 Security, etc. | Wi-Fi 5 AC1200 wireless speed: 300Mbps (2.4GHz) + 867Mbps (5GHz) | OS compatibility: Supports Windows 11,10, 8.1, 8, 7 (32/64-bit), Linux 4.2+( Need to install the drivers first). Can not work in Windows XP and Mac OS. | PCI-Express X1 installtion. | Pre-installed 12cm regular-profile bracket. Come with 8cm low-profible bracket.

DESINGN FOR SimpliSafe outdoor Cam: This 5V/2A power adapter and 16.5 feet cable can be better Compatible with SimpliSafe , keep your SimpliSafe outdoor Cam continuous charged, No more battery changing.Not compatible with SimpliSafe indoor Cam. | WATERPROOF AND DURABLE: Made of high quality materials, this SimpliSafe Wireless Outdoor Camera micro-USB head with waterproof circle, tightly fit to prevent rain from penetrating the charging port, ensures to charge your camera all the time. | 16.5FT LONG CABLE: If your camera and power adapter do not have an ideal installation location, a long enough cable will give you a lot of leeway. No need to worry the limit of distance. | SAFEGUARD PROTECTION: Multiple built-in safeguards and intelligent IC identification technology protect against short circuit, over-current, over-voltage, over-heating and over-charging. | SAFEGUARD PROTECTION: Multiple built-in safeguards and intelligent IC identification technology protect against short circuit, over-current, over-voltage, over-heating and over-charging.

3.5-inch color screen, supports 16BIT RGB 65K color display, rich in color display. | 480X320 resolution, touch function, with touch pen. | Using the SPI serial bus, only a few IOs are needed to light up the display. With SD card slot, it is convenient to expand the experiment. | Compatible with Arduino R3/Nano/Mega controller boards, which will improve your project operation. | Provide rich sample programs and underlying driver technical support.

60X to 120X Magnification - This pocket microscope can magnify 60X to 120X. A powerful magnification range can meet the needs of students. The microscope focuses easily, which can see the beauty of nature that the naked eye can't see. | Portable Handheld Microscope - BNISE handheld microscope is comfortably in a kids' hand, and easy to carry, fits in a bag or pocket, made of ABS plastic, lightweight. Dimensions: 2.36" x 1.34" x 3.54" , Net Weight: 61g/0.13lb. | Built-in LED&UV light - Bright light sources even can clearly see individual cells. UV light is used to inspecting currency. LED Light is Powered by 1 AA Battery (not included). | Portability Case - The shell is made of Oxford fabric, PU leather and supreme hard EVA material. It is waterproof, shockproof and dust-proof. it is compact and lightweight, allowing you to easily put it to a handbag, backpack. The sturdy and smooth zipper opens and closes easily, giving you the freedom to carry your pocket microscope wherever you go, whether it's outdoor adventures, travel, or work. | Microscope Sllides with Specimens - This mini microscope set is come with five pieces of entry grade microscope slides with specimens which includes insects and plants. Whether young kids or students, our pocket microscope is the best gift for them.

Exclusive Technology: Anker’s world-famous PowerIQ detects your devices and adjusts voltage output accordingly, delivering a tailored, optimized charge. | Simultaneous Charging: Charge any 2 devices at the same time; phones, tablets, headphones, portable chargers, and more (does not support Qualcomm Quick Charge). | Travel Ready: Smaller than a golf ball, and equipped with a foldable plug, this ch

7-Color Backlit Bluetooth Keyboard - This backlit bluetooth keyboard has 7 switchable backlight colors, It helps you to type easily in the absence of light. The bluetooth keyboard adopts a scissors switch design, which allows you to have a comfortable and quiet typing experience and enhance your work or entertainment experience and fun. | The keyboard and mouse compatible with iOS, Android and Windows system. They are perfect for Apple iPhone, iPad, iPad Mini, iPad Pro, iPad Air, Android Samsung Windows Surface tablet cell phone. | Adjustable DPI Silent Bluetooth Mouse - The bluetooth mouse adopts a silent design and has three adjustable DPI levels of 800/1200/1600. You can use it in a quiet office environment or late at night without worrying that noise will attract the attention of others. | Ultra-thin and Lightweight Design - Ultra-thin wireless keyboard and mouse combo, you can put the keyboard and mouse in your briefcase, handbag or backpack at will. It can still be used easily in the smallest desk and has your own space. | Built-in Rechargeable Battery - Rechargeable bluetooth keyboard built-in 400mAh lithium battery, which can work for 40 hours without backlight or stand by for more than 3 months on a single charge, making you forget the trouble of replacing the battery of the bluetooth keyboard and mouse. (No need to purchase another battery, and equipped with a USB cable)

Controller(s)：Intel(R) 82573 | Single RJ-45 Ports | PCIe1.0, x1 Lane | Support WOL, No-Support PXE, SR-IOW, ISCSI | Compatible with Widows 7/8/10, Centos/RHEL 6/7/8, Ubuntu 16/18/19/20, Debian 9/10/11, FreeBSD 10/11/12, Vmware Esxi 5/6/7, SLSE 11/12 (Note : Esxi 6.5u3~6.7u3 need dump ne1000 driver, NO-Support Esxi 7 and above version )

Rand McNally GPS Charger - Fully compatible with Rand McNally GPS TND 720 LM 730 LM 710 700 RVND 7720 LM 7715 LM 7710 7725 LM 7730 LM 5525 LM 5510, Good Sam RVND 7735 LM RVND 7 GPS Road Explorer 7 & 5 Advanced Car GPS TND 500 510 515 520 525 530 LM 540 550, DashCam 300 | Durable Rand McNally Power Cord - It passed various quality and safety tests so you can have peace of mind. It maintains optimal performance for your Rand McNally Truck GPS by providing a steady and reliable power supply. | Type B 7" & 5" mini USB connector, LED power indicator, heavy-duty insulated cable, DC 5V 2a power adapter | Truck GPS Charger with built-in protection against overcharging, overheating, and short-circuiting to safeguard your Rand Mcnally GPS TND Tablet | Plug-and-Play GPS Charger - This Rand McNally Tablet TND 720 charger provides a steady and reliable power supply. It comes with an LED indicator so you can manage your truck GPS tablet's power effectively.

🍅【Unique design】Phone holder base is assembled by single socket arm and flex holder adhesive base, no need to connect the rod can be directly connected with phone holder with 1 inch ball head, single socket arm flexible holder sticky base ergonomic design, perfect fit for ball head adapter, connect tightly and not easy to loosen, labor-saving butterfly knob design can adjust the tightness of single socket arm, tool-free installation, anyone can operate. | 🍅【Compatible with RAM mount B Size ball head】Single socket arm compatible with RAM mounts and FANAUE any 1 inch ball adapter, can accommodate all industry standard B size/1“/25.4mm ball head, which can be well extended to connect with magnetic car mount, buggy phone holder ect, phone mount base for a variety of scenarios to work, such as scooters, strollers, shopping carts, dirt bikes and other models, providing you with a variety of mounting solutions to enjoy more convenient riding trip. | 🍅【Long service life】Single socket arm flex holder adhesive base body consists of aluminum alloy and non-slip rubber foot, surface after class III hard anodic oxidation treatment, 3M VHB adhesive base high low temperatures, waterproof, tear out without trace, can firmly mounted on the walls, offices, lockers various occasions, tear out without trace, used in the plane/curved at will. It‘s UTV/ATV phone holder, scooter phone holder, baby stroller phone mount for long-term use good choice. | 🍅【360° rotation】Single socket arm connected with 1 inch ball adapter can be rotated 360°, easy to adjust the device to horizontal or vertical direction, connect the phone clip to assemble different phone holder, VHB sticky adhesive for dashboard, window, windshield and other car accessories, won't block the line of sight, enjoy the navigation, listen to music, GPS positioning, video calls and functions, super sticky even on the rugged and bumpy roads can provide stable perfect viewing angle. | 🍅【Lifetime Warranty】Single socket arm flex holder adhesive base has lifetime warranty, if you have any problems, please feel free to contact us, we will provide you with the best solution within 24h. Single socket arm flex holder adhesive base connects the cell phone holder to combine into motorcycle cell phone holder, car phone holder, magnetic car mount, sports camera holder and so on, it's the best Christmas gift for your father, husband, son or friend to bring them the fun of riding. | 🍅【Single socket arm flex holder adhesive base installation instructions】（1）Install the single socket arm flex holder adhesive base making sure the surface is clean dry.（2）3M VHB adhesive base for one-time permanent use.（3）The adhesive surface should be in full contact with surface, otherwise warping will affect adsorption effect.（4）After the paste is completed, should be pressed few times to make it stick firmly, use after 24H of resting.

UNIVERSAL FLOATING SHELF WALL MOUNT HOLDER: Ideal for use with your baby monitor, security camera, WiFi router & Mesh system, small speakers, plants, books & more. Can fit anything upto 4.3" inch x 4.3" inch and upto 2lb in weight. | SMART DEVICE SHELF: Make use of empty wall space with clean our simple shelves - easily place your security cameras, Smart speakers, Bluetooth speakers and much more in any location you choose. | UNIVERSAL SHELF FOR: Google Nest Cam, Wyze Cam, Arlo Pro Pro3, DXR-8 Baby Monitor, Google Home Mini, Echo Dot, Bose SoundLink & Many more devices | 3M VHB STRONG TAPE: Brainwavz floating shelves are simple to hang with no tools or screws required. We use only the best 3M VHB tape to mount the shelves on a variety of surfaces. Just peel off the red backing from the 3M VHB tape, affix our wall mount in desired location, let it set for a few hours and you’re ready to go. | IMPORTANT: DO NOT PLACE ON PAINTED, DAMP OR PLASTERED WALLS, PAINT OR PLASTER MAY COME OFF ALL!

【2023 UPGRADED VERSION】Expands computer ports into a HDMI 4K output port, a USB 3.0 port, a USB-C charging port.Three ports can work at the same time. Easily expand usb c devices and fulfill your daily use | 【4K UHD HDMI PORT】 Enables you to mirror or extend the display of your phone/laptop to your TV, projector or monitor in up to 4K UHD (3840x2160@30Hz) resolution. Help you enjoy nice pictures on movies and work | 【HIGH SPEED USB 3.0 TRANSFER】 The USB 3.0 port provide highest peak data transfer speed up to 5 Gbps, easy to transfer a HD movies in short time.Compatible with USB flash disk, camera, removable hard drive, mouse, keyboard or other USB A 2.0/USB A 3.0 devices | 【WIDELY COMPATIBLE】 Tuwejia adapter compatible with MacBook/MacBook Pro 2022/21/20/19/18/17/16/15 ,Macbook air 2022/21/20/19/18,IPad Pro 2022/21/20/19/18,iMac 2021/20/19/18/17,iMac Pro, Samsung S22/21/20/S10/S9/S8 Note10/9/8, Surface Book,Dell XPS13/15, Acer Chromebook,Google Chromebook, HP etc. | 【PLUG-AND-PLAY, PROVIDE CHARGING】 Using Tuwejia adapter don't require any software,drivers, or complicated installation process. Meanwhile,Type-C charging quickly output make you satisfaction.Slim and portable design with aluminium body provides better heat dissipation

Wifi door sensor only supports Wifi 2.4GHz - Smart door sensor comes with AAA batteries. You don't need to prepare batteries for the door magnet in advance | Voice Control - Smart door sensor detector is compatible with Amazon Alexa and GoogleAssistant to realize voice control. Just add Smart Life app or Tuya App to your Alexa or GoogleHome App. For example, you could say, "Alexa, is the "Device' Name>" Closed/Opened?" | Create an Alexa Routine - Automatically turn on / off your smart home device by connecting the Smart Door and Window Sensor to other smart home devices. For example, When you come home and open the door, your home will automatically light up, and the Amazon Echo Dot play music. | WIFI door and window sensor alarm - When the door/window is open or closed, the sensor will push the app notification alarm to your smartphone. You can share wireless security alerts with your family. | EASY INSTALLATION - Comes with metal screws and 3M tape. No need for complicated tools and steps to install the window sensor.The smart door magnet can not only be installed on doors and windows, but also can be installed in garage door, wine cabinet, mailbox, safe box, pet door, etc

For Fujifilm Camera Case: Fit for fujifilm instax mini 11/9/8 /8+ instant film camera. | Leather Surface: The Interior is soft and scratch resistant. Dust-proof, adjustable shoulder strap. Green/Safe/ Harmless materials for children. Frankmate will update the pattern of the product via popular elements all the time. | Giftable: Flip cover design, the top part of this camera case can be detachable. There is also a pocket at the back of the case for your shots to be stored temporally. Looking cute and packaged in a box made it a great gift for someone needing a mini camera case. | Design inspiration: Butterflies have always been popular; Unicorns and alpacas represent good hope; Special astronaut patterns are very suitable for boys; Color stripes are like rainbows, very exquisite; Pure black, brown, purple, pink case has always been the most classic color to match the camera. | Package Include: Frankmate Camera Casex1, Removable Strapx1, same pattern mini photo albumx1. This time we presented mini photo album of the same style with 28 pockets. Frankmate will guard your precious memories!

Perfectly designed for babies 0 - 1 month,it has good air permeability,soft and delicate,with novel and fashionable styles. offering a captivating look for newborn photoshoots. | It can make your baby become more fashionable,attractive and cute. Perfect for memorable photography shoots, baby shower gifts and christmas holiday presents. | As each baby has a certain difference in weight and size, the outfits may be too large or too small, you can change the shooting angle or use other methods (stretched or shortened) to shoot. | As the delicate skin of babies,Please wash by hand before use.Washing method: Hand wash in cold water, do not bleach, and dry it before use. | Note: Due to lighting effects, computer monitor resolution and other reasons, the picture may be different from the actual product. We will try to avoid unnecessary errors.Thank you for your understanding.

【Perfect Fit for Tundra】ECOZEN HD screen protector is specially designed for 2022 2023 2024 Tundra Limited, Platinum, 1794 Edition, TRD Pro, Capstone, and also fit for 2023 2024 Sequoia. 14-inch screen protector perfectly, providing a seamless, precise fit for 2022-2024 Tundra & Sequoia. | 【Easy to Install】GPS navigation screen protector foils for 2022-2024 Tundra accessories, comes with installation kit. Automatic adsorption, easy to install, good adhesion. No bubbles. NO residue when removed! As easy as install cellphone screen protector. But be more careful as it’s a bigger size. | 【Anti-Fingerprints & Anti-Glare】Touchscreen protector for Tundra 2024 2022 2023 & Sequoia 2024 2023, has an oleophobic layer anti fingerprints and smudges. Keep screen clean and clear for Sequoia & Tundra accessories. The reflective layer of the tempered film can absorb bright light and anti glare on the screen! You can clearly see the screen of the Tundra & Sequoia! | 【High Strength Screen Protector】9H hardness tempered glass touchscreen protector for Tundra & Sequoia accessories. 3x stronger than regular glass. Resistant scratch and crack. Prevent scratch, shock, protect navigation screen as new every day. Perfectly adhering to its edges without any gaps. | 【Smooth Feeling】No matter what you have on your fingers, the silky smooth feel and responsiveness ensure you can control the screen the way you want, even when wearing gloves. No matter how many taps and swipes you do. Screen protector for Tundra & Sequoia will not operate insensitively.

🍎 Protective case for iPad 10.2 Inch 2021 iPad 9th Generation (Model number A2602 A2603 A2604 A2605)/ 2020 iPad 8th Generation (Model number: A2270 A2428 A2429 A2430) / 2019 iPad 7th Generation (Model number: A2197 A2198 A2200) ONLY. NOT compatible with any other iPad models. Please check back bottom of your iPad to find the model number | 🍎 Ultra slim and lightweight hard back design adds minimal

Compatible devices: Garmin vivoactive 4S (40mm) and vivomove 3S (39mm). | Band Size: Small fits 5.3-6.7 inches wrists, Large fits 6.5-8.0 inches wrists. | Hook-and-Loop fastener: Quick and easy adjustment. | Material: Woven Nylon. Soft, breathable, and lightweight. | WARRANTY&SERVICE: No-hassle 3 Months Warranty. For any issue, just contact with us. We will reply within 24 hours.

SMART TABLE STAND: Desktop holder for Dot 4th Gen, Dot 4th generation kids edition and clock edition (Device is not included), but not for Echo 4th Gen with premium sound. | MAKE LIGHT RING MORE NOTICEABLE: The translucent light guide and built-in reflection sheet make your Dot's notification light more visual, more uniform, and more beautiful(better than the many others). | EXCELLENT CABLE MANAGEMENT: The built-in cord storage allows you to easily hide the extra messy cord at the bottom, and keeps the desktop neat. | EASY TO USE: No drilling or screwing, just need to wind the excess cable in the stand and connect the power supply. You can conveniently move it to anywhere you want and easily adjust the hidden power cable length according to the fact-in-use condition. | COMPACT AND STURDY: Made of premium ABS, Small sizes and lightweight, and lovely profiles perfectly fit for Dot 4 smart speakers. The bottom non-slip rubber pads will maintain the bracket more stably on the table and avoid scratching the surface of the touch.

✔️ This case is ONLY compatible with New 13 Inch MacBook Pro with Touch Bar, which released in 2017-2021, Model Number: M1 A2338 A2251 A2289 A2159 A1989 A1706. Please check the model "AXXXX" on the bottom of your macbook before purchase to confirm the model number as same as the listing title. | ❌ WARNING: This case is NOT compatible with all previous generation MacBook Air 13 inch ，not applicable to Macbook Pro 13 inch without Touch Bar(Model: A1502 A1425 A1708 A1278, released between 2010-2016) If the item arrives with scratches, you can contact the customer for a refund or exchange. | ✔️Hard Case: High-quality PC plastic with high impact strength, wide temperature range, and good dimensional stability(You don't have to worry about the case deforming due to high temperatures). Hard Shell Case could protect your MacBook from scratches. In addition, the case with colorful rubber coating, which makes your Mac more unique. | ✔️Keyboard cover: Made with high transparency and engineering grade TPU material, ultra thin to 0.12mm, and won't hurt the screen and made it easier for typing. And high transparency film allows backlit keys to clearly shine through, and the keyboard cover is completely washable and reusable, easy to apply and remove for cleaning or disinfecting. | ✔️Package Includes: 1 x Macbook Pro 13 Inch Case，2 x Keyboard Cover (one for pro 13" case (M1)A2338 / A2251 / A2289, one for pro 13" case A2159 / A1989 / A1706 )，1 x Screen Protector，1 x Cleaning Cloth. Please follow the steps on the package to install.

Specially Designed for SimpliSafe Outdoor camera， this wall mount can be adjusted to suit a variety of mounting angles and positions. | Compared with the original magnetic mount, this mount uses a 1/4 screw to fix your SimpliSafe Outdoor camera, which is more secure and can prevent the camera from accidentally falling. It will prevent someone from just ripping it off a barcket | Perfect View Angle,It will helps position the cameras to capture the best angle. you can tilt the camera down slight or to the left or right to capture what you need to see. | You can fix the camera on the wall to get a larger angle of view instead of fixing it on the ceiling, Same adjustment method as camera pan-tile | Package included:1*wall mount for SimpliSafe Outdoor Camera , 1*Hex Key Allen Wrench 2*screw (Camera Not Included)

【Compatibility】Designed exclusively for All-new Blink Outdoor 4 (4th Gen), equipped with extra micro USB connector, also compatible with Blink Outdoor/Indoor (3rd Gen) & Blink XT/XT2, NOT compatible Blink Mini Camera.(Note: Blink Camera NOT included) | 【2Pack 16.4ft/5m Flat Cable】16.4ft/5m length offers flexibility for camera placement, eliminating concerns about cable length. The flat cable easily threads through tight spaces like doors and windows, making installation easy. | 【24Hours Power Supply】No more climbing ladders or changing batteries. Our outdoor charging cable keeps your blink camera always charged, super convenient, and time-saving. | 【Weatherproof Design】Comes with weatherproof design, innovative Micro-USB and Type-C connectors with waterproof silicone caps, snugly fit with blink outdoor cameras, preventing water ingress. | 【UL & FCC Certification】The charger adapter features high-quality fire-resistant housing and built-in safeguards, provides a short-circuit protection and effectively ensures safe charging, against over-current, over-heating and over-voltage, which enables charging your cameras safer.

COMPATIBILITY: The wall mount is compatible with Echo Dot 5th Gen (2022 release) & Dot 4th Gen. Device and plug are not included. | CABLE MANAGEMENT: All cables and connector can be hidden totally in the back of the dot 5th & 4th generation wall mount, avoid ugly cables, free up desk space, and prevent potential damage caused by liquid spills or food splashes. | EASY TO INSTALL: No drilling holes or screwing. The installation can be completed in a few minutes. Great for kitchens, living rooms, bedrooms, and bathrooms. | MORE RELIABLE: The Dot 5 & 4 outlet holder is built well and sturdy. The lower rear part of the wall mount is raised and backed against the wall below the socket to prevent the holder from bouncing when the buttons are pressed, and to make it more difficult for the mount to fall from the socket. | NO VOICE AND SOUND LOSS: No microphones and speakers are blocked, keep the sound front fire the same as the original design, without weakening sound, nor affecting the pronunciation.

❤ 2 PCS NEWBORN WRAP PHOTOGRAPHY PROPS SET--The package of this wrap photo props kit comes with Baby Long Pearl Wrap and a Pearl Headband. It will help you to record and share your baby’s growth on social media as treasured keepsakes for just born. | ❤ CLASSIC OUTFIT SIZES--1. The long ripple wrap blanket length is about 90x170cm/35.5x67 inch; Recommend for 0-12 month babies. 2.The pearl headband fits babies of all ages. The length of pearl strand is about 34cm/13.4in, the total length is about 100cm/39.4in. | ❤ SOFT AND COMFORTABLE, NO FADING MATERIAL-- The baby photo wrap is made of soft, comfortable cotton and linen fabric, which can take good care of your baby's delicate skin. We refuse to use inferior rayon material. Breathable, smooth and odorless handmade newborn shooting props is the best gift for your baby. | ❤ REUSABLE AND MULTI-USAGES -- This photoshoot wrap for baby girl has very soft and Multi Usages, you can also apply it to dress, clothes, jewelry, handbags, home decor, tabletop decoration, the idea for female underwear brim, handcraft accessory, pillow, curtain, dolls outfits, etc. | ❤ GOOD AFTER-SALES SERVICES -- We maintain high standards of excellence and strive for perfect customer satisfaction! If you have any questions send us a message, we are always here to help you. If you want to return the product, please use the original packaging to return the unused, unwashed, or damaged product.

Specifications: | LED display size: 9 * 1.5cm | Display weight: 88g | Main control box size: 10.5 * 6 * 2cm | Main control box weight: 63g

Universal Compatibility: Compatible with iPad mini 5th generation 2019 7.9 inch A2126 A2124 A2125 Tablet .If you have any questions about your model, please feel free to contact us. | MFi Certified Cord: MFi certification stands for Made for AirPods, iPad. It's a stringent process, but when a product is MFi-certified, you can be sure it's safe to use.With our chargers for AirPods, iPad no more trigger warning messages pops up. | Output: USB-C PD3.0: 5V, 3A, 9V, 2A, 12V, 1.66A 20W, max, USB-A QC3.0: 5V, 3A, 9V, 2A, 15V, 1.2A 18W, max, Input: 100-240V 50-60Hz | Portable and Compact : The charger is slim and lightweight enough to carry anywhere,such as the office, the business trip, travel. | Package Contents: 1 X AC charger , 1 X 6.6Ft cable

Compatible for GLC-LH-SMD/ GLC-LH-SM/ SFP-GE-L,Meraki MA-SFP-1GB-LX10,Ubiquiti,D-Link, Netgear, TP-Link, Supermicro, Mikrotik, Broadcom, Linksys, ZyXEL, ZTE and Other open equipments.2-Pack. | 1000Base-LX/LH Gigabit Ethernet, 1.25 Gbps,1310nm wavelength ,20km reach, Singlemode,Dual LC | Hot-Pluggable SFP Transceiver Module, PLUG and PLAY, with Advanced DDM Function to monitor real-time parameter a

Exteral Size: 40x40x10mm / 1.57x1.57x0.39 inches (L x W x H) | Bottom Thickness: 3mm / Copper Fin Thickness: 0.5mm | Material: Pure Copper / Processing Method:Skiving fin / Finishing:Antioxidant treatment / Weight: 65g ± 10g | Used for Electronic,CHIP,IC,MOS computer 's component heat dissipation, or anywhere you need a efficient heatsink. | This Heatsink is made of pure copper, and the thermal conductivity up to 401W/(m·K) ,is high quality and effective heatsink.

Compatibility - This soft fluffy laptop case will be compatible with MacBook Air 13.6 inch with Retina Display and Touch ID, 2022 2023 2024 release (models: M3 A3113 & M2 A2681 ). WARNING: NOT compatible with other laptop models. Please kindly check the model number "Axxxx" on the back of the laptop before your purchase, make sure you choose the exact same model number as the listing title stated "A3113" or "A2681". | Precise Cutouts - Case with Logo Cutout design. Easy access to all buttons and features, plug in your cable or headset without removing the case. Snug fit, 2-piece snap-on cover, easy to install and remove. | Sturdy Protection - Bottom case is made of plastic, top case is made of high quality plastic and PVC leather, protect your laptop from fingerprints, scratches and other daily damage. In addition,keyboard covers protect your keyboard from dust or crumbs. | Chic and Trendy Ideas - We use a unique process technology to apply a cute teddy bear plush design to the top cover. It is smooth and soft. Available in a wide variety of colors and designs to suit every personality. So, pick your favorite style to add aesthetics to your device and make it the perfect fit for you. | Functionality - The bottom cover is designed with ventilation vents to help dissipate heat and prevent your laptop from overheating. Four silicone feet on the bottom cover keep your laptop secure and stable. Plus, this case opens fully to over 135 degrees.

【☛NOTE☚】: The first time to use, please open the battery cover and TAKE OUT the plastic insulator before using the fan, OTHERWISE it will not be recharged or used. This portable fan is an USB port rechargeable model. It can be powered directly by batteries， mobile power, wall charger and so on. | 【3 ADJUSTABLE SPEED LEVEL】: Low/medium/high speed level. Adjust appropriate fan speed by pressing the power button repeatedly. And 6pcs fan blades, strong wind, wind distance up to 3m. Brushless motor makes the fan durable. Efficient power and conversion circuitry can minimize the loss to save energy and protect environment. | 【FOLDABLE& MULTIPURPOSE DESIGN】: The mini desk fan can fold up to 180°.You can use this fan: ①hold it on your hand, ②put it on the table, ③hang it on the sun umbrella, ④clip it on other objects; If you don't know how to use it, please look at the picture or contact us. If you find better uses, you can also tell us. | 【HANGING UMBRELLA DESIGN】: Unique design style, you can hang the fan above your umbrella or parasol please check the fourth picture. The design is ideal for outdoor crowds, and you don't have to worry about the outdoors even when the temperature is so high, because this fan can cool you down,It's a must-have for the summer. | 【PORTABLE& LIGHTWEIGHT DESIGN】:When you go outside, you can put it in the bag with you,especially suitable for summer travel or outdoor sports, you can take it to anywhere,like NBA/World Cup Qualifiers/Football Game/or any activity.

For use with LabelWorks LW-400, LW-600P and LW-700 label printers | Nearly 30' of tape (9 m) | Features a split-back design for easy peeling | Durable, hard plastic casing for safe storage | Compatible Devices: use with label works LW-400, lw-600p and lw-700 label printers.

🖊Tab S6 Lite S Pen for Samsung Galaxy Tab S6 Lite (EJ-PP610)) All Model | 🖊The S Pen attaches magnetically right to your tablet and is always ready to go. Quickly sort through memos when you save with searchable tags. | 🖊Better than a case, Turn ideas into action. The S Pen makes it easier than ever to write notes and personalize photos and videos, all without needing to charge. The S Pen attaches magnetically right to your tablet and is always ready to go. | 🖊Efficiency in a class of its own. S Pen makes it easier to keep up with schoolwork. When taking notes, you can jot first and change color later. Quickly sort through memos when you save with searchable tags. Even write directly onto PDFs to cut the study clutter. When it's finally crunch time, you'll be organized and ready. | 🖊Draw inspiration with S Pen. S Pen is a bundle of writing instruments in one. Its natural grip, low latency and impressive pressure sensitivity will make it your go-to for everything from drawing to editing documents. Plus it won't get lost thanks to a built-in magnetic holder.

This is a portable power supply only for Raspberry Pi Pico/ Pico W.Plug & Play. | Only supports 18650 lithium battery | The remain power of battery can be read from the 4 LED indicators. You can also read battery voltage and current information by connecting the USB-to-TTL cable to the serial port pins of the UPS. | The charging prompt during charging is very intuitive, and when the battery is fully charged, it will stop charging, and the `Standby indicator` on the panel will light up. | All GPIOs is leading out and providing clear silkscreens which are very convenient for Pico experiments. | Package includes:1 x UPS for Raspberry Pi Pico / Pico W,1 x instruction（Raspberry Pi Pico NOT Included）

❤️【WHAT YOU’LL GET】 - 7x5ft/84’’ Wide by 60’’ High Valentine's Day Backdrop. | ❤️【COTTON MATERIAL】 - This red heart backdrop is made of economical cotton material. Compared to vinyl, The production process of cotton get an upgrade. Washable, not prone to creases, can be ironed, durable, seamless, portable, non-reflective. | ❤️【VIBRANT COLOR & ORIGINAL DESIGN】 - Printed by Computer Result in High-resolution. Every Art Work Has Gone Through Hundred Times of Tests. Designed by Our Own Designers. | ❤️【HEART THEME】 - This Valentine's Day Photo Backdrop is Perfectly Used as Party Decorations or Cake Table Banner or Photo Studio Photography or Wall Decors or Candy Bar Decorations. It’ll Definitely Be A Hit for Your Special Event. | ❤️【WHY CHOOSE US?】 - Thousands of Ideas Provider, Beautiful Pictures Designer, Professional Backdrop Manufacturer, Your Reliable Business Partner.

Ultra soft premium microfiber cloth provides lint free and gentle non-abrasive fiber that effectively removes dust and safe for pristine, scratch free surface cleaning. | Eliminates streaks, smudges, fingerprints, smears, and dirt fast with increased cleaning capacity for all types of delicate surfaces including expensive eye wear, camera lenses, tablets, iPad, laptops, auto detailing, televisions

TYPE-C interface, not easy to break | ATMega 32U4 AU running at 5V/16MHz,supported under IDE v1.0.1 | On-Board micro-USB connector for programming | 4 x 10-bit ADC pins | 12 x Digital I/Os (5 are PWM capable) | Rx and Tx Hardware Serial Connections

Dimension of outer the frame is 80mm(L) x 80mm(W) x 25mm(H) / The size of fan in inch is 3.15in(L) x 3.15in(W) x 1in(H); The center to center distance beween the mountiong holes is 71.5mm/2.81in. | Operating Voltage Range：4.5V to 5.5V. (overtake to 5.5V, it can also work. but not safe, and seriously affects lifespan of fan.) | Rated Voltage: DC 5V; Rated Current: 0.25 Amp; Rated Speed: 2500 RPM; Air flow: 39.7CFM; Noise:26.8dBA | Connector: USB Plug; Bearing Type: Sleeve Bearing ; Life: working up to 35000h at 25 degrees. | Package include: 2x 80mm cooling fan; 2x 80mm metal grill; 8*M4x35mm screws & nuts( The metal grill is separate with fan and it is mounted by screws.)

Designed ONLY to be compatible with MacBook Air 15 case M3 M2 Chip with Liquid Retina Display & Touch ID 2023 2024 Release (models: A3114 & A2941 - MRYU3LL/A, MRYP3LL/A, MRYM3LL/A, MRYR3LL/A, MXD43LL/A, MXD23LL/A, MXD13LL/A, MXD33LL/A, MQKR3LL/A, MQKW3LL/A, MQKP3LL/A, MQKU3LL/A, MQKT3LL/A, MQKX3LL/A, MQKQ3LL/A, MQKV3LL/A). WARNING: This case is NOT compatible with other model laptops. | Please kindly check the model number "Axxxx" on the back of the laptop before your purchase, make sure you choose the exact same model number as the listing title stated "A3114" or "A2941" that compatible with MacBook Air 15 in case. | NO Cut Out design, transparency is different from color to color. Fully vented for safe heat disbursement, fully access to all buttons and features. Totally removable, easy to put on and take off that can protect your laptop from scrapes and scratches. | Case dimension: 13.46 x 9.45 x 0.46 inch, compatible with MacBook Air 15 inch M3 case, compatible with MacBook Air 15 inch M2 case with liquid retina display & Touch ID with dimension: 13.4 x 9.35 x 0.45 inch (2023 2024 Released). Ultra slim light weight hard case design almost adds no weight to your device. | Including matching color keyboard cover & screen protector to protect your keyboard & screen against spills. The small storage bag keeps mouse and earphone well-organized.

【REPLACE YOUR ALRO BATTERIES】 This arlo power adapter with 25ft/7.5m cable keeps charging your NETGEAR Arlo Security Camera continuously, you don't need to change the battery and spending your money on arlo batteries（Replace CR123A）. | 【EASY TO INSTALL】 You just need to put the charging adapter in the cam then push hard,it will fit and stay in the cam very well, super easy and convenient. No Interference from it, make your camera work great. | 【CE & UL CERTIFICATION】 The arlo power cord has gotten the CE & UL CERTIFICATION. It have been thoroughly tested for safety, can prevent overcharge,overheating,short circuit and over current,providing you with a perfect power supply solution. | 【LONG & FLAT CABLE】 25Ft/7.5m long enough for you to keep the camera at home or outside, even if it is far away from the plug. Flat cable makes it possible to pass through windows or doors without any difficulty to charge your camera. | 【OUR PROMISE】ALERTCAM dedicates to provide premium and long-lasting security camera accessories for all our customers. We're always here to help you and make you satisfied.

[Compact and convenient design]: Size:5.3x3.23x1.37 inch.