10GBase-LR SFP+ 10 Gigabit Ethernet Single-mode SFP+ Module, 10 Gb/s, 1310nm wavelength, duplex LC connector, SMF, operates on Single-mode LC/UPC fiber cable spans of up to 10km, DDM support. | Easy to Use & Durable - Plug and play, hot-pluggable. Rotate the ring latch down at a 90-degree angle to unlock, then insert it into the port or pull the transceiver out from the switch | Wide Compatible - fit for Cisco SFP-10G-LR, Meraki MA-SFP-10GB-LR, Ubiquiti UF-SM-10G, D-Link, Netgear, and Other Open Equipment with 10G SFP+ Port | High Quality - All products are manufactured under a strict quality control system, every module has been tested one by one on different switches before shipping, to ensure compatibility with different brands of switch | After-Sales Service - please contact us, if any product quality and compatibility issues

The high-security AirTag surface mount. | Opens & closes with included ElevationLock security tool. | Impact-proof: Angled sides keep it from getting knocked off. | Mounts in seconds to flat surfaces with strong 3M VHB adhesive. | IP69 Waterproof. | Stealth, low profile design (1.97" diameter x 0.42" tall). | Designed for skis & snowboards. Equally great for trailers, vehicles, motorcycles, ATVs, watercraft, equipment, bike racks, camping stuff, camera lenses etc... | Patented.

This camera has 4 modes for video output: 1080p AHD, 1080p CVI, 1080p TVI and 960H analog (cvbs) | 24 Powerful IR LEDs for Night Vision up to 65ft (15m), it features a 3.6 mm lens with a 85° Field of View (FOV) to cover large areas. | 1/2.9" CMOS sensor, effective pixels:1920*1080, True Day & Night with ICR for perfect color reproduction. | IP66 weather-rated metal housing that provides protection from the elements, including dust and sand, as well as rain and snow. | This dome camera requires a DVR (digital video recorder) for recording video. You could switch the video mode according to the DVR that you use. If you met any problem, please feel free to contact us.

Compatibility Check Required: Confirm that your vehicle has a 16-pin connector on the rearview mirror. This adapter is suitable for Ford models including F150 (2011-2023), Bronco (2021+), Explorer (2011-2019), Mustang (2013-2021), and more. Please refer to the compatibility chart before purchasing. | Plug-n-Play Installation: The adapter connects directly to the rearview mirror for an easy installation process. No permanent modifications are necessary, keeping your dashboard clean and organized. | Multiple Output Options: The adapter is designed with three different output cables: Mini USB (5V), Micro USB (5V), and Type-C (5V). Suitable for various USB-powered devices including dash cams and radar detectors. | Power Specifications: This adapter supports devices drawing less than 2A at 5V for optimal performance and heat management. Ensure that your device is compatible with these requirements for effective operation. | Limitations on Compatibility: Note that this adapter does not work with devices requiring 12V power or those using barrel jack/RJ11 connectors. It is also not suitable for digital mirrors or vehicles equipped with backup camera mirrors.

Converts standard, straight wired cables to null modem wiring | Gold contact plating provides reliable connections with repeated mating cycles | Slimline design reduces leverage strain on computer ports | UL grade 94V-0 connector insulator satisfies flammability requirements | Screws are removable and reversible

【Freely Adjustment】The spin bike clamp mount with ball head design that can rotate 360 °.You can easily adjust your phone or tablet to the horizontal or vertical position with one hand. The gooseneck mount with a total length of 22.5cm can be flexibly adjusted to a size of 6CM. This length design not only allows for flexible adjustment,but also prevents shaking during intense sports, ensuring the safety and stability of the phone at all times. | 【Applicable Range of Clamp Base】This handlebar mount has adjustable clamps and is suitable for most handlebars / poles / tubes (range: 0.5''-1.6'' diameter). You can safely hold the device on spin bike, treadmill,elliptical machine or other equipments in the gym. | 【Super Stability】The clamp base are embedded with soft and non slip rubber pads, allowing the clamp to firmly connect to the spin bike handle bar without slipping, ensuring the safety and stability of your smart phone.The surface of the phone bracket has non-slip silicone where it contacts the cell phone, which can effectively protect your phone from slipping and scratching. | 【A Well Assistant for Fitness】This tablet stand phone mount is easy to install and remove, without the need for additional tools. You can easily attach your phone or tablet to a dynamic bike or treadmill, use it to listen to music, watch movies, or take videos and photos to record your fitness routine. It's a must-have tool for fitness enthusiasts. | 【High Compatibility】This universal handle bar mount tablet holder is compatible with most mobile phones and tablet PCs on the market (4-13 inch devices). Compatible tablets: Apple iPad Pro 9.7 / 10.5 / 12.9 / 13, iPad 1 2 3 4 5 6 7 / iPad Air / Air 2 / iPad Mini 2 3 4 / Apple iPhone 12 Mini, etc. Compatible mobile phones:15 series/14 series/13 series/12 Pro Max, 11 Pro, Xs Xs Max XR X, 8, 7 plus, 6 6s; Samsung Galaxy S3 / Samsung Galaxy S4 / Samsung Galaxy Tab 2, Samsung S10 S9 S8 S7, etc.

See Compatible Phone in Description:direct connect over the head landline telephone headsets with microphone compatible with avaya aastra allworx adtran alcatel lucent altiGen comdial digium gigaset Intertel plantronics mivoice. mitel | High Sound Quality for Clear Communication: Wideband Sound phone headsets for Office phones enables natural listening experience, features Noise Canceling Microphone to reduce background noise, Acoustic Shock Protection Circuit to protect your hearing. | Most Comfortable Headset: Super lightweight Corded office phone headset RJ9 with adjustable headband to fit all head sizes, high quality and soft leatherette ear cushion enhance all-day wearing comfort. Professional Mic Mute / Volume Control built in. | Super Durable: Precision design, quality plastics, unibody headband construction, superior quality microphone makes this call center headset for landline phone sturdier and more durable. Compete with Plantronics or Jabra heavy duty Phone Headsets for Call Center, Telemarketing & Office. | 30-DAYS MONEY BACK GUARANTEE :ONLY COMPATIBLE WITH SOME SPECIFIC PHONE MODELS LISTED IN DESCRIPTION. For Other Phones, Pls CONTACT US for Compatibility Guide or Advice. RJ9 Telephone Headset for AVAYA: 6402D 6408D+ 6416D+M 6424D+M 8403 8410D 8434DX 4406D+ 4412D+ 4424D+ 4424LD+ 1120 1140 1165 1210 1220 1230 1408 1416 3904 3905 7208 7316 9404 9406 9408 9504 9508 2410 2420 5410 5420 5610 5620 5621 5625 DT1 DT3 DT5 QE4610 4610 4612 4620 4621 4622 4625 4630.

【Captivating Gold Linear Flare】The Gold Streak Effect filter is a special effects filter that creates an anamorphic lens flare. It elevates your photography and videography with its unique cinematic flare effect. | 【Well Built】 Made of durable optical glass and a lightweight anodized aluminum alloy frame, it has a clear protective coating to prevent scratches and dust. | 【Variable Star Filter】With a 360° rotatable design, it allows for easy adjustment of the angle and direction of the flare effect. | Slim Rim Profile】With a depth of 3.5mm (not including rear threads), it is ideal for wide-angle lenses. | 【Compatible with 82mm Lenses】It works with 82mm filter threads. Please verify your camera's lens thread size. For example: Ø82.

【Tuya Wireless Access Control System】Touch keypad panel and RFID keyfob identification with LED indication, Remote unlocking, set public password, share, modify and delete fingerprint/passwords/ID cards, view door opening records. | 【Multiple Users, Multiple Access Ways】10,000 users capacity.Swipe card or code password or TUYA APP multiple unlocking methods to open the door. Keypad come with 10PCS IC keyfobs, compatible with all electric locks. Smart phone APP wireless control keypad, management users, more convenient and quick. | 【IP68 Waterproof】The keypad is completely encapsulated In Epoxy, anti-vandal and weatherproof, support weatherproof, suitable for mounting either indoor or outdoor. | 【Reliable and Practical and Extendibility】Has blue backlight, the digits number can be seen even at dark. Has a doorbell button, can install a wired doorbell. Has WG26, WG34 Wiegand output, can be used as a card reader. | 【Widely Used】Tuya access control system can prevent unauthorized personnel from entering. Very suitable for garage, hotel, shops, warehouses, laboratories, school campus access, identification, parking lot entry, other private spaces.

Radar detector mount is only compatible with Uniden R7 R8 | Radar detector rearview mirror mount is made of aluminum alloy,easy to install | Please ensure that the rearview mirror lever has at least 0.4 inches of valve stem space to install this bracket | Mirror mount radar detector bracket handle is equipped with 1/4 screw adapter,easy to expand different devices | During installation,please use a hex wrench to tighten the screws and secure the radar detector

TELESIN° 4-in-1 Floating Selfie Stick: Made of aluminum alloy to not easy to rust and corrosion, it can be used as a tripod buoyancy stick in water, allowing the camera to shoot stably in water, or as a waterproof telescopic selfie stick for daily shooting, or as a stable tripod or a handle. Tips：After use in seawater, it must be rinsed for 10 minutes, soaked in water for 10 minutes, and dried until all the salt is washed away. Failure to clean will cause the grip to become brittle and break | Wide range of uses: This waterproof selfie stick adopts a telescopic design, with a length of 8.6 inches-24 inches ( 22cm-61cm ). When you don't need to use the selfie stick, you can shrink it to 22 cm and it can be easily put into a backpack | Compatibility: Compatible with GoPro 13 12 11 10 9 8 7 6 5 4 3 3+, DJI OSMO, Insta360 and the most action camera, the bottom interface features a 1/4-inch screw, can be connected to extend the length. Tips : You need to purchase action camera adapters by yourself. We recommend purchasing plastic ones or using a waterproof case that matches the host to prevent the device from being too heavy and affecting the buoyancy effect. | High-quality materials: The TELESIN° Floating Tripod is made from aluminum alloy, which is not easy to rust and corrode. Weighing only 145 grams, it is compatible with devices up to 200 grams. Its sleek design and vibrant color make it easy to locate, and it comes with an anti-loss wrist strap to prevent accidental loss during snorkeling | What‘s your get : TELESIN° Floating tripod selfie stick x1, hanging rope x1, Thumb screw x1, instruction manual x1, if there are any quality problems with the product, please let us know at any time and we will do our best to solve the problem for you

Please NOTE: do not plug the dash cam adapter into safety sense computer, Toyota / Lexus safety sense computer ports. The dash cam power adapter Not fit for digital mirrors or mirrors with backup cameras. Dash cam power adapter NOT fit for devices requiring 12V or powered by a barrel jack or RJ11 connector. Dash cam power adapter NOT work for 12 pin connectors found inside trim. | Easy Plug & Play Installation: This dash cam power adapter connects directly to your vehicle's rearview mirror without any permanent modifications, allowing for a clean and hidden installation. | Tailored Compatibility for Select Models: Specifically designed for Toyota Tacoma (2016-2023), Tundra (2014-2021), Sienna (2016-2020), and Highlander (2015-2016), this adapter fits vehicles equipped with a 12-pin connector on the auto-dimming rearview mirror. Ensure your vehicle is compatible before purchase for the best experience. | Versatile USB Power Supply: This adapter supports a variety of USB-powered devices, including popular dash cams like Garmin Mini 2, Garmin Live, and Vantrue models. It also works with other USB gadgets such as radar detectors and GPS units, making it a versatile addition to your vehicle. | Optimal Performance & Safety: Designed for devices requiring less than 2A at 5V, this adapter ensures efficient power delivery and heat management. Please verify your device’s power requirements to ensure compatibility and optimal performance. | Complete Package for Convenience: Each package includes the Dash Cam Power Adapter, along with multiple charging cables (Type-C, USB Mini, USB Micro) and 3M tape for easy installation. Whether you’re powering a dash cam or other USB devices, you’ll have everything you need right at your fingertips.

★ This Quick-release lens foot plate is specially designed to take the place of the original tripod collar foot, fits for Nikon NIKKOR Z 800mm f/6.3 VR S Lens; Z 600mm f/4 TC VR S Telephoto Lens; Z 400mm f/2.8 TC VR S Lens. It features Arca-compatible dovetail which allow you attach your lens to Tripod Ball Head, Clamp or Panorama Head of Arca-Swiss standard. | ★ Made of advanced aviation alumium with precious CNC machining, guarantees long time sturdiness and stability. | ★ Reserved three 1/4" and two 3/8" screw mounting holes at the bottom, you can mount your lens on a tripod through it. | ★ With AS standard interface, compatible with all Acra-Swiss type quick release systems. It converts the collar to make it directly compatible with Arca-type quick release clamps. | ★ Size: 135mm x 38mm x 29mm/5.3" x 1.49" x 1.14" (Length x Width x Height ); Net Weight: 109g/3.84oz

Silicone Case for DJI Osmo Pocket3 : Premium silicone case specially designed for DJI OSMO Pocket 3. Fits perfectly on the body and allows access to all buttons and functio | Silicone Desktop Base:The base is made of silicone material, The slot precisely fits the camera body,waterproof and wear-resistant, soft and not hurt the camera.say goodbye to the trouble of scratching camera on the desktop. | Osmo Pocket 3 Expansion Adapter:compatible with various mounting options like car suction cup mounts, chest straps, backpack clips, tripods, extension poles, or bike mounts. It can be directly connected to any accessory with a 1/4 screw, features built-in anti-slip silicone padding to prevent scratches on your camera. | Screen Sun Hoods Sunshade:Made of ABS material, waterproof, wear-resistant, built-in silicone non-slip pad material, no odour, firm and stable without hurting the body,After installation does not affect the screen rotation, horizontal and vertical screen available | 3 in 1 Pocket 3 Acessories Sun Hood:include Lens Sun Hood Sunshade,Lens Potective Cover,Screen Protector.Compatible with DJI Osmo Pocket 3,Made of high quality and lightweight ABS plastic,It's durability, waterproof, wear-resistant, durable, and not easily deformed. | Screen Tempered Glass Film: 9H hardness tempered glass screen protector offers reliable scratch and shatter resistance to protects your camera from sharp objects. Accurately sensing finger touch, does not affect the touch screen. | Please contact with us if you have any problems, we can reply asap within 24hours after getting your emails,we will solve your problem and ensure your shopping

【Strong Magnet Heavy Duty 】Telesin magnetic mount built-in 6 magnet pin, whole body made of aluminum to ensure it’s magnet force (not bear loading weight) equal to 9kgs/19.8lbs. No worries about dropping off while recording. | 【Two Mounting Adapter 】This telesin mount comes with 2 mount adapter, one is standard two-leg for gopro action camera, one is 1/4 adapter for insta360/video light/ microphone/cell phone use. Note: the package doesn’t include any phone clip. | 【360 Rotating Multiple Angle 】This magnet mount built with 360 rotatable dual ball head makes it adjustable up and down, vertical and horizontal, achieve flexible shooting. | 【Multiple Use 】This aluminum magic arm extension mount can be used on many vlog, vlogging, video recording scenarios, car outside (on smooth metal part), tube, roll bar, home, kitchen Cooking, refrigerators, gym, any surface that is smooth metal. | 【Widely Compatible 】Work with most of action cameras, wearable cameras, card machines and mobile phones (required extra phone clip, NOT included), NOT suitable for SLR and DSLR. Compatible with max mini Hero 13 hero 12 Hero 11 Hero 10 Hero 9 Hero 8 Hero 7 Hero 6 Hero 5 Black, DJI Action 5 Pro Action 3 4 Osmo Pocket 2 3, Insta 360 One R RS X2 X3 X4 Go 2 Go 3 Ace Pro, akaso, Dragon Touch, APEMAN, Crosstour, XiaoYi, Apexcam, VEMONT, AKAIRIO.

Design for Mic Music Stand: It's becoming more and more common to use tablets to watch song score during live performances, and this micphone music tablet stand is designed for that purpose. Easily attaches your iPad to any position and angle on microphone stands, booms, music stands, cymbal stands. Multiple occasions to use, can be used when performing and sharing music in choir class, wedding, concert, party, meeting. | Sturdy & Stable: This stand is 99% made of aluminium alloy. It makes it more sturdy and stable. You can easily attach it to a cymbal, microphone stand or sheet music stand, then share and enjoy your music. | Viewing Angle Adjustable: The long arm of the stand can be adjusted at 270 degrees, the short arm can be adjusted at 180, and the ball at the end can be rotated 360 degrees. By adjusting the connecting arm to meet different angle needs. Adjust the angle as needed, and then use the two wrenchs (1 socket wrench, 1 allen wrench) provided to lock the position easily. No need to worry about the tablet falling down during use. | Easy Installation: Open the clips and easily attach the iPad mount to the pole. This metal mount could fit different post sizes from 0.63’’ to 1.77’’ (16 mm ~ 45mm) diameter. | Wide Compatibility: This mic stand holder compatiable with all device from 4.7 to 13 inches device, such as 2023 iPad Pro 11/12.9/13, 2022 iPad 10.9, iPad 10th Generation, iPad mini 6, iPad air 5/4/3/2/1, iPad 10.2, iPad mini 5/4/3, iPad mini 8.3, iPad mini 7.9, iPad Pro 9.7, iPad pro 10.5, iPad 10th 9th 8th 7th 6th 5th 4th 3th 2th Generation, Amazon Kindle Fire HD, Surface Pro, iPhone 15 14 13 Pro Max etc.

【Never Fall Off-Classic Series Design】Car vent tablet/phone clip adopts latest locking design. strong clip will grip one of the car vent blades. The spring clip plate and the tightening nut will provide absolute fixation. No matter how rough the road is, it won't fall off. | 【Protect Your Devices & Vent】There are lots of anti-slip and anti-scratch rubber pads on this vehicle air vent tablet holder. It will protect your phone/tablet and automobile vent from scratches. Above designs of the carmount will ensure safe driving whether you are navigating, charging, calling, or listening to music. | 【360 Degree Rotation】The car air vent tablet stand's 360-degree rotatable head will provide you with the best viewing angle to keep secure driving. You can place your tablet in any orientation(horizontal,vertical and more), Just enjoy the best drving experience. | 【Universal Compatibility】Car vent tablet clamp works with all 4-12.9 inch devices, with or without case including for the new 2022 / 2021 iPad Pro 11/ 12.9 inch, iPad 10.9, iPad Air 5, iPad Mini 6/ 5/ 4/ 3, iPad Pro 9.7/ 10.5, 2020 iPad Pro, iPad 5th/ 6th/ 7th/ 8th/ 9th/ 10th generation, accessories, Galaxy Tab, iPhone 15 Pro Max, iPhone 14 Pro Max, 13 12 11 Pro Max, Xs, and other smartphones, tablets. | 【Your Satisfaction Guarantee】We strive for excellence in both our products and customer service. we are confident you will enjoy car ac vent tablet mount, and you can enjoy LIFETIME SUPPORT, HASSLE FREE RETURNS, MONEY BACK GUARANTEED!

Crystal Clear Music Streaming: You can stream your favorite tunes thru your car's stereo, anti-static and interference-free, via Bluetooth, USB Flash Drive (≤32GB), and/or microSD card (≤32GB). Advanced noise reduction technology will ensure brilliant interruption-free music. Note: APE, WMA MP3 WAV APE FLAC music formats in USB flash drive or microSD card are supported. | Answer Calls Hands-Free: High-performance microphone with Noise Suppression (CVC) technology, grants you a crystal clear call every time. Answering/redialing/dismissing or ending a call just simply click a button. CVC (clear voice capture) noise echo canceling and noise suppression technology helps transmit crystal clear voice quality when making calls. | Bluetooth V5.0 with Siri, Google, and Alexa Assistant：Providing added stability and more lasting connection without sporadic interruptions, Bluetooth 5.0 features echo-cancellation to reduce background noise giving clearer calls and supporting voice commands to ensure safer driving. You can also use Siri, Alexa, or Google Assistant to make phone calls, send texts or get driving directions. Enjoy complete voice-control and safer knowing your paying attention to the road and not your phone. | Intelligent Fast Charging & 3 USB Ports: With 2 USB ports (5V-2.4A and 5V-1A) and 1 USB-C PD Type-C 18W, you can charge three devices simultaneously. Built-in over-current protection, over-voltage protection, intelligent temperature control, short circuit protection, will effectively ensure safe charging. | Car Battery Voltage Detection: - Built-in intelligent voltage detection chip, detecting car battery voltage when booting. The FM transmitter will display the car’s voltage when plugged into the cigarette lighter. Keeping you in the driver's seat and informed of the car battery healthy at all times to avoid problems when driving.

The most secure & comfortable AirTag collar mount for dogs. | IP69 waterproof, dogs can swim with it. | Fits any width dog collar (or harness). | Doesn't dangle: Thru-collar design uses self-piercing screws to go through any collar up to 0.20"/5mm (Which is 99% of collars. Some leather or studded collars are too thick). Recommended for pets over about 10 lbs. Patents pending. | Ultra-strong composite body, CNC machined screws (loctite prevents screws from vibrating out, do NOT overtighten). Unbreakable ballistic Nylon6 polyamide backplate. Does NOT impact AirTag signal - contact us if you have issues. | Lifetime Guarantee - Contact us with any issues, we will make it right.

[Compatible Model] This waterproof dive case is compatible for DJI Osmo Pocket 3 Gimbal | [ 40M/131FT Osmo Pocket 3 UnderwaterDive Case ]Its depth can be up to 40 meters(131FT). This is deep enough for you to photograph and observe what you want | [High Quality Material]We have passed the safety test, don't worry about the occurrence of water leakage, and the shooting effect is clear and high reproduction. It is made of PC material and the lens is well protected. The shell is made up of aluminum alloy which is very hard. It has a small protective cover on top that helps protect the camera from damage and prevents dust and other debris from getting inside | [Panoramic View ]The interface is flexible to run, durable and explosion-proof. The product is equipped with a fogging cloth, which can well ensure good shooting quality. Most importantly, you can shoot in all direction | [Use easily]Designed to be lightweight and easy to handle.You can use it easily and comfortably

【Super Stable】The Tractor ipad clip mount is made from upgraded ABS plastic, and padded with non-slip silicone. Easy-to-lock tractor tube with protective pads so the farming machine tablet mount clips securely to the handle/ pole/ tube, protecting your devices from scratches and working well in very harsh environments. | 【Beneficial Viewing】The tablet holder of this agricultural machine can be rotated 360 degrees to provide you with the best viewing angle. Ideal for viewing work processes, work routes when working in the field. View job details while using forklifts to load and unload goods. Greatly improve efficiency for your work. | 【Perfect for Application】Tractor Tablet mount holder has adjustable clamps and is suitable for most handle / poles / tubes (range: 0.51-1.77inch/13-45mm in diameter). You can safely hold the device on a Farming Machine/ Scarifier/ Rotary Machine/ Planter/ Trailer/ Cultivator, Harvester/ Rice Transplanter/ Crop Sprayer/ Weeder. It can also be mounted on Scooter/ Stroller/ Shopping Cart/ Golf Cart/ Wheelchair/ Microphone and more. | 【Wide Compatibility】Tube Tablet Stand is fit for all 4-13" cell phones and tablets, such as iPad Pro 13（M4) 12.9, 2024/2021/2020 iPad Pro 11, iPad Pro 10.5 9.7, iPad 9th generation 10.2, iPad Air 5th 4 3 2 1, iPad Mini 6 5 4 3 2 1, Galaxy Tab S8 S7 S6/A8 A7 A6, Android Tablet, iPhone 16 15 14 13 12 11 Pro Max, iPhone 16 15 14 Plus, iPhone 13 12 Mini, iPhone Max Xs XR X 8s, Galaxy S22 S21, Surface, Galaxy Z Fold Series, Pixel, Gps navigation and so on. | 【Easy to Install】Do not need extra tools to install, just tighten the knob. All Dosvsi products provide 60 days refund and 12 months manufacturer quality after-sales service. If you have any questions during use, please contact us. (Box's includes: 1x pole clip, 1x tablet clamp, 1x user manual.)

Compatibility - Compatible with HP EliteBook x360 1030 G3,HP EliteBook x360 1030 G4,HP EliteBook x360 1040 G5,HP EliteBook x360 1040 G6; HP Elite x2 1013 G3; HP Elite x2 G4; HP ZBook Studio x360 G5.Warm Tips: software programming (Windows 10 required on paired device), and the digital proximity alert are supported on these products. | 4096 Levels of Pressure Sensitivity - The rechargeable active pen has an ultra-sensitive pen-point with 4096 pressure levels that natural onscreen note-taking, drawing, and app navigation. And it’s easier than ever to keep track of, with a built-in magnetic attach capability. | Easy to Use - Palm Rejection and Tilt operation function allow you to rest your hand naturally on the screen while writing. Once your device is paired and in range, it detects the pen and cues you where to place it onscreen. Erase, highlight, and click on your content with the two convenient side buttons. Two Built-in Side Buttons-Right-click and Erase. | Take the Pressure off Digital Inking - Reduce the force required to use your pen when writing, drawing onscreen or working with your touch applications with improved starting and inking pressure vs. the previous generation. | Rechargeable Battery - Keep working and creating with a active G3 pen that’s rechargeable through USB-C fast charging with 30 minutes charging for battery life of one week. LEDs cue you on charging status. Quickly launch apps and shortcuts.

【For 7 inch Kindle 2024]】Designed exclusively for 7" all-new Kindle Paperwhite 12th Generation 2024 Released & 7'' Kindle Paperwhite Signature Edition (12th Gen, 2024 Release), and Kindle Colorsoft Signature Edition (1st Generation, 2024 Release). Only Fits 7 inch Kindle 2024 Releases. | 【With Stand & Double Hand Strap】 Double wrist strap and the foldable stand are cleverly combined, the shell folding stand design can release the hands and reduce the reading pressure on the hands. The dual-wrist design allows the left and right hands to hold the kindle interchangeably, so that you can get a better reading experience in different scenarios. | 【Auto Sleep/Wake】The magnetic 7inch kindle paperwhite/kindle colorsoft signature edition case automatically wakes your device when opened and puts it to sleep when closed | 【Magnetic Closure】The front magnetic design can be firmly attached to the front of your 7 inch kindle paperwhite 12 generation to prevent accidental opening and damage to the kindle screen, bringing all-round protection to your 7-inch kindle paperwhite & kindle colorsoft signature edition | 【Material】Made of high quality waterproof PU leather exterior, scratch resistant microfiber interior. This is definitely the perfect choice for your Kindle case.

【Compatible Models】Compatible for MacBook Pro 15" A1286 2009-2012 year.PPN: 821-0832-A , APN:922-9035, 922-9306, 922-9749. | 【Install】Each Macbook Pro trackpad replacement A1286 is tested before shipping and working. | 【Check】Before purchasing, please carefully review the product description and pictures and check your computer year to make sure you are ordering the correct one. | 【Tips】This is not an easy job for someone who has no technical skills with disassembling or assembling laptop.So only purchase this item if you know how to install it. | 【Service】If you have any questions, please feel free to contact us and we will try our best to help you. Thank you very much!

[Advanced Fingerprint Technology]: Features cutting-edge biometric performance with a False Acceptance Rate (FAR) of less than 0.001% and a False Rejection Rate (FRR) of less than 1.8%. This precision ensures maximum security by drastically minimizing the chances of unauthorized access while maintaining user-friendly access for legitimate users. This superior accuracy offers a perfect blend of convenience and high-level security in a compact form. | [Robust Security with MOC, ESS, Microsoft CoPilot Plus PC, and SDCP Compatibility]: The Match-On-Chip (MOC) technology ensures all biometric data is processed, stored, and safeguarded directly on the chip, creating a fortress of security that prevents external threats and unauthorized access. Additionally, the TEC SecureTouch is compatible with ESS (Enhanced Security Suite), Microsoft CoPilot Plus PC, and SDCP (Secure Data Cryptographic Protection), providing even greater protection for sensitive data and ensuring the highest level of data security through advanced encryption and AI-enhanced assistance. | [Wide Compatibility and Easy Access]: Fully compatible with Windows 11 and 10, this device supports Windows Hello for quick fingerprint authentication, unlocking your PC or laptop with a simple touch. Note: Not compatible with MAC OS, ARM-based chipsets, or tablet devices. | [24/7 Customer Support]: Should you encounter any difficulties or require troubleshooting, our dedicated support team is available around the clock. For installation guidance or further information, please refer to the detailed product description provided below. | [Portable and User-Friendly Design]: Compact and crafted from durable materials, this device is not only easy to carry but also designed for quick setup and use, making it ideal for secure, password-free login and file encryption on the go.

Tempered glass durability rated at 9H hardness | Extreme clarity preserves the original screen brightness | Touch-responsiveness guarantee hassle-free access and no delay | Designed for Ford Mustang (2024) 13.2" | Ford Mustang Screen Protector, Ford Mustang Accessories

The Cable Matters Thunderbolt 4 cable features the newest Thunderbolt cable and USB 4 cable standards in one product; Take advantage of the new Thunderbolt 4 40Gbps connector with this all-in-one Thunderbolt 4 cable and USB4 cable with support for both cable standards | Certified Thunderbolt 4 cable supports the latest Thunderbolt 4 features and performance with unmatched simplicity and reliability; Enjoy reliable 40Gbps data transfer on all Thunderbolt 4 devices; Power and charge devices with Power Delivery 3.0 100W charging support | Thunderbolt cable 4 features enough bandwidth to drive one 8K display or two 4K displays; Connect the latest high-definition monitors and TVs for vibrant, crystal-clear 8K video and authentic high-quality audio | Backward compatible Thunderbolt 4 to Thunderbolt 3 cable features full backward compatibility with Thunderbolt 3 cable standards and Thunderbolt 3 devices and hosts; Replace your Thunderbolt cable with a new one that fully supports the latest features to future proof your setup | Future-proofed Thunderbolt 4 cable also functions as a USB4 cable, with support for the latest USB4 standard; Connect USB4 devices and transfer up to 40Gbps of data depending on host and device USB4 support; USB-C cable is also fully backward compatible with USB-C 3.2, 3.1, and 2.0 speeds and devices, and supports USB-C features such as DisplayPort Alt Mode (DP Alt Mode) and USB Power Delivery (USB-PD). Fully compatible with iPad Pro and MacBook Pro

【Compatibility】Compatible with most Rocky Mountain Phantom T, Escort, and Beltronics radar detectors, including S55, New Passport, Redline, STi Magnum, STi Driver, GX65, GX55, RX65, RX55, V6, V8, V10, V12, Pro 100, 200, 300, 500, Vector 895, 995, 965, and 955, newer Vector 940 and Express 795, Passport 9500ix, 9500i, 8500x50, 8500, 7500S, 7500, 6800, 5000, 4600 4500 and 4200, Solo S2 S3, RD-5110, 4, and 5. (Not applicable to Escort MAX radar models) | 【High quality materials】Say goodbye to plastic brackets that are prone to detachment when exposed to high temperatures. Our car mounted rearview mirror radar brackets are made of all aluminum alloy and undergo anodizing treatment to improve corrosion resistance and wear resistance. | 【Stability】 Use a hexagonal wrench to tighten the bolts to maintain the stability of the rearview mirror bracket. Even on rough roads, radar detectors can be fixed firmly and will not shake. | 【Not obstructing sight】The rear-view mirror rod radar bracket can be freely adjusted to the ideal position, and the angle is flexible to avoid blocking the line of sight and ensure driving safety. | 【Easy to install】Device can be completed within a few minutes, please ensure that the length of the rearview mirror lever arm is greater than or equal to 0.4 inches. The bracket handle is equipped with a 1/4 screw adapter interface, which can be extended to different devices.

Wide input range: 100-240V. | Designed for Canon PowerShot G5 X, G7 X, G7 X Mark II, G9 X, G9 X Mark II | Comes with a mini box (substitute of battery), directly power camera without battery. | Ideal accessories for long-time photographing. | US Plug. Half decoded!

【Innovative Transformation】2-IN-1 Touchpad with Numeric Keypad The idea of 2-in-1 touchpad is that make the touchpad with numeric keypad. You can easily switch the touchpad /number keypad to multi-touch trackpad mode or number keypad mode freely. | 【Enhanced Efficiency】Enhance Typing Efficiency The Nums smart keyboard provides an excellent typing experience, enabling faster and more efficient text input for working and studying. | 【Ultra-Thin Design】The sleek and ultra-thin profile of Nums Touchpad Keyboard perfectly complements the aesthetic of your MacBook or Surface device, maintaining a minimalist look and feel. | 【Durable and Protective】Made from high-quality tempered glass, Nums Touchpad Keyboard not only offers a superior touch experience but also serves as a durable protector for your laptop's touchpad, keeping it safe from scratches and wear. | 【Wide Compatibility】Nums Touchpad Keyboard is designed to be compatible with all of MacBook Air, MacBook Pro models, offering a versatile solution for enhancing your laptop experience.

Wide Compatibility - This bluetooth keyboard and mouse combo is compatible with ipad 10.2/ipad mini/ipad air/ipad pro. Note: The system needs to be updated to ipadOS 13 and above. | 7-Color Backlit Bluetooth Keyboard - This backlit bluetooth keyboard has 7 switchable backlight colors, It helps you to type easily in the absence of light. The bluetooth keyboard adopts a scissors switch design, which allows you to have a comfortable and quiet typing experience and enhance your work or entertainment experience and fun. | Adjustable DPI Silent Bluetooth Mouse - The bluetooth mouse adopts a silent design and has three adjustable DPI levels of 800/1200/1600. You can use it in a quiet office environment or late at night without worrying that noise will attract the attention of others. Have a better mouse operation experience in office and entertainment. | Ultra-thin and Lightweight Design - Ultra-thin wireless keyboard and mouse combo, you can put the keyboard and mouse in your briefcase, handbag or backpack at will. It can still be used easily in the smallest desk and has your own space. | Built-in Rechargeable Battery - Rechargeable bluetooth keyboard built-in 400mAh lithium battery, which can work for 40 hours without backlight or stand by for more than 3 months on a single charge, making you forget the trouble of replacing the battery of the bluetooth keyboard and mouse. (No need to purchase another battery, and equipped with a USB cable)

Note: Designed ONLY to be compatible with MacBook Air 13.6 inch 2024-2022 M3 M2 Chip with Liquid Retina Display & Touch ID (Model: A3113 / A2681). WARNING: This case is NOT compatible with other model laptops | Precise Cutouts, Fits Snugly: Soonjet's exclusive module is molded according to the original Macbook using micro 3D cutting tech. Compatible with MacBook Air 13.6 inch case fits snugly like a second skin. It allows easy access to all ports and ensures smooth opening and closing | Top-tier Texture, Same as Bare MacBook: With high-precision micro-etching matte finish, this space gray clear perfectly matches your MacBook and retains the original sleek and minimalist design. Plus, the oil-repellent nano-coating can effectively reduce fingerprints, smudges, and scratches, making it longlasting new and clean | Apple-sourced Material, 10 Year Crack-free: To solve the common problem of easily broken and unreliable thick plastic cases on the market, we've upgraded our materials to explosion-proof composite PC. It increases hardness by 200%, making the shell scratch-resistant, sturdy, and crack-free for up to 10 years | 10s Snap-On, Detail Protection: Our mini buckle design enables quick and easy installation. The soft protective coating allows for easy insertion and removal without damage. Don't let cheap cases scratch your laptop

Note: Designed ONLY to be compatible with MacBook Air 13.6 inch 2024-2022 M3 M2 Chip with Liquid Retina Display & Touch ID (Model: A3113 / A2681). WARNING: This case is NOT compatible with other model laptops | Precise Cutouts, Fits Snugly: Soonjet's exclusive module is molded according to the original Macbook using micro 3D cutting tech. Compatible with MacBook Air 13.6 inch case fits snugly like a second skin. It allows easy access to all ports and ensures smooth opening and closing | Top-tier Texture, Same as Bare MacBook: With high-precision micro-etching matte finish, this space gray clear perfectly matches your MacBook and retains the original sleek and minimalist design. Plus, the oil-repellent nano-coating can effectively reduce fingerprints, smudges, and scratches, making it longlasting new and clean | Apple-sourced Material, 10 Year Crack-free: To solve the common problem of easily broken and unreliable thick plastic cases on the market, we've upgraded our materials to explosion-proof composite PC. It increases hardness by 200%, making the shell scratch-resistant, sturdy, and crack-free for up to 10 years | 10s Snap-On, Detail Protection: Our mini buckle design enables quick and easy installation. The soft protective coating allows for easy insertion and removal without damage. Don't let cheap cases scratch your laptop

【 20 Inch Privacy Screen Filter Dimentions】- Width: 17 7/16" (443 mm), Height: 9 13/16" (250 mm), Diagonal: 20" (508 mm) - ACONETMAX 20 Inch Monitor Privacy Screen Filter is engineered to be compatible with HP, Dell, Samsung, Lenovo, LG, Acer, ASUS, ViewSonic, and other monitor brands. Please verify your computer screen's width and height measurements before ordering. It's not recommended to make your selection based solely on your computer screen's diagonal size. | 【Superior Privacy and Anti Glare】- ACONETMAX 20 inch Computer privacy screen filter blacks out your computer screen when viewing from the side, while maintaining a crystal clear screen straight-on.The Anti-Glare Protector also protects your eyes from harmful glare,UV, and blue light. [Note: It does not block visibility directly behind you, regardless of the distance.] | 【Perfect for Travel and Open Workspaces】- ACONETMAX 20 inch Monitor privacy filter is the ideal solution for healthcare providers, mobile workers, commuters, students, and business travelers. Now you can stay compliant and safeguard sensitive corporate information while working in airplanes, subways, airports and public areas. | 【Two Attachment Options】- The 20 inch Monitor Privacy Screen Filter Installs Easily. Option 1 uses clear adhesive strips that securely attach to any computer screen. Option 2 (for computer screens with a raised bezel only) uses slide mount tabs that easily stick to the display frame, allowing you to slide the privacy screen filter on and off as needed. | 【Package Contents】- Each package includes one 20 inch privacy screen filter [One Side Matte and One Side Glossy], two sets of clear adhesive strips, two sets of slide mount tabs, and a microfiber cleaning cloth. Buy with confidence -ACONETMAX specializes in providing best-in-class privacy solutions to individuals, small businesses, corporations, government, and educational institutions.

Versatile Speaker Stand: This wall-mounted stand is designed to hold a compact speaker, Compatible with Echo Studio and all suitable sized Speakers such as Sonos Era 100 ,Homepod and TREBLAB HD-360providing a convenient and space-saving audio solution | Sleek and Modern Design: Featuring a charcoal gray fabric exterior, the speaker blends seamlessly into any decor with its minimalist and contemporary aesthetic | Sturdy Construction: Built with a durable steel bracket and a weighted base, the stand ensures stability and prevents accidental tipping | Easy Installation: Mounting the speaker stand on the wall is a straightforward process, allowing for quick setup and placement | Compact Companion Speaker: The included speaker, though small in size, delivers clear and rich audio quality, perfect for enhancing your listening experience

【OPTIMAL PERFORMANCE】OCESTORE premium upgrade Audio Auxiliary Jack is brand new to meet OEM specifications. | 【HIGH QUALITY】OCESTORE premium Audio Auxiliary Jack is made of high quality material which can use for a long time. | 【REPLACE OEM PART NUMBER】28023-4BA0B,280234BA0B. | 【PERFECT FITMENT】Audio Auxiliary Jack Compatible with 370Z 2014-2019 ;Altima 2013-2015 ;Frontier 2014-2017 ;Kicks 2018-2019 ;NV 2014-2019 ;Rogue 2014-2017 ;Rogue Sport 2017-2019 ;Xterra 2014-2015 ; | 【PACKAGE & SERVICE】Package Include: 1 Pcs x Audio Auxiliary Jack.Any question Pls fell free to contact us, we will reply you within 24H.And we offer a 12 month warranty.

Compatible with Cobra radar detector iRadar ESD SPX RAD 480i 450 380 7800BT | Rearview mirror radar bracket is made of all aluminum alloy, Has excellent stability and lifespan. Say goodbye to fragile plastic brackets | The adjustable design of the bracket base allows for flexible use and adjust the required angle as neeeded | Please ensure that the length of the rearview mirror lever arm is greater than or equal to 0.4 inches | Installing our radar detector holder can firmly grip the rearview mirror and maintain stability while driving. It is the perfect accessory for radar detectors

100% Brand New and High Quality | Compatible part number 651687-001 651699-001 | This tray is compatible with Proliant G8 servers that use 2.5" SAS/SATA hotswap drives | Hot-Swap, Newest Version , Compatible with for Proliant ML310 ML110 ML350 DL360p DL380P DL160 DL388 DL560 DL180 DL120 SL250S SL230S Gen8 G8 Gen9 G9 | Package include: 2* 2.5" Hard Drive Caddy + 8* screws

★ This Quick-release lens foot plate is specially designed to take the place of the original tripod collar foot, fits for Sony FE 70-200mm F2.8 GM OSS II Lens (SEL70200GM2) , FE 70-200mm f/2.8 GM OSS Lens (SEL70200GM), FE 100-400mm F4.5-5.6 GM OSS Lens (SEL100400GM) , E PZ 18-110mm f/4 G OSS Lens (SELP18110G) . It features Arca-compatible dovetail which allow you attach your lens to Tripod Ball Head, Clamp or Panorama Head of Arca-Swiss standard. | ★ Made of advanced aviation alumium with precious CNC machining, guarantees long time sturdiness and stability. | ★ Reserved two 1/4" and one 3/8" screw mounting holes at the bottom, you can mount your lens on a tripod through it. Two safety stop screws in both side on the bottom to prevent drop by accident. The safety lock makes it easy putting on or off from the collar of the lens. | ★ With AS standard interface, compatible with all Acra-Swiss type quick release systems. It converts the collar to make it directly compatible with Arca-type quick release clamps. | ★ Size: 85mm x 38mm x 35mm/3.3" x 1.49" x 1.37" (Length x Width x Height ); Net Weight: 98g/3.46oz