Perfect Compatibility: This seat post quarter turn mount compatible with Garmin Varia RTL510/RTL515/RVR315 Rearview Bike Radar. Widely used in most road bikes bars. | Wide Compatibility: The seat post mount also compatible with Variant Rearview Radar, Variant Smart Bike Lights. | Security Protection: The Varia seat post mount with securely lock and precise position your Varia radar or tail light on your bike, so that you can focus on cycling. | Easy to Install: Tool-free installation, simply install the mount on your bicycles handlebars, and very easy to disassemble. | Package Includes: 1 x seat post mount, 1 x 28.6mm Spacers, 1 x 25.4mm Spacers,1 x M2.5 Hex Key Wrench; with sincerely after-sales service, if have any question we will deal with it for you within 24 hours. Thank You!

Made from heavy duty cold rolled steel, these Vertical Rack Rails were designed to mount your rack mountable networking or telecom equipment such as patch panels and PDUs. | The rack rail pair kit features multiple sized mounting holes across the entire length to allow for a variety of installations | Silk screened Rack Unit measurements and pre-tapped with 12-24 threading for convenient equipment mounting | The kit comes in pair and can be attached to wooden frame, workstation or other DIY projects. Available in sizes from 2U to 20U. | Hardware are included for equipment installation

Transmitting voltage: 12V ;Transmit working current: 500mA; Receive output: 5V DC. | Normal use distance: 8~23mm. | Sensing distance: Receive output 5V500mA at 8mm; Receive output 5V150mA at 15mm. | If the receiving and the rectification and voltage-stabilizing circuit are partially lost, the transmission transmission efficiency is up to 90%; | Note: Please do not use less than 8 mm when using it, otherwise it will be overpressure damaged if it is close!

Ideal for Android smartphones and tablets, and MIL cameras | Up to 32GB to store even more hours of Full HD video(2) | 1GB=1,000,000,000 bytes. 1TB=1,000,000,000,000 bytes. Actual user storage less. | (2)Full HD (1920x1080) video support may vary based upon host device, file attributes, and other factors. See official SanDisk website. | Up to 120MB/s transfer speeds let you move up to 1000 photos in a minute(5) | Up to 120MB/s read speed, engineered with proprietary technology to reach speeds beyond UHS-I 104MB/s, require compatible devices capable of reaching such speed. Write speeds lower. Based on internal testing; performance may be lower depending on host device, interface, usage conditions and other factors. 1MB=1,000,000 bytes. | (5)Based on internal testing on images with an average file size of 3.55MB (up to 3.7GB total) with USB 3.0 reader. Your results will vary based on host device, file attributes, and other factors. | Load apps faster with A1-rated performance(1) | (1)A1 performance is 1500 read IOPS, 500 write IOPS. Based on internal testing. Results may vary based on host device, app type and other factors. | 10-year manufacturer warranty (See official SanDisk website for more details regarding warranty in your region.)

【FOR CAMERA ACCESSORIES】SMALLRIG Screw Set for Camera Accessories AAK2326 is designed for camera cages, handles, plates and other camera related accessories | 【26 SCREWS IN TOTAL】The box includes six types of screw, 26 screws in total | 【SOCKET CAP & SLOTTED & PHILLIPS SCREW】26 screws in total: 2 x 1/4” slotted screw, 8 x 1/4” socket cap screw, 2 x 3/8” slotted screw, 4 x M2 phillips screw, 2 x M2.5 socket cap screw, 4 x M3 phillips screw, 4 x M4 socket cap screw and a box for storage | 【SIX TYPES OF SCREWS】The box includes six types of screw: 1/4”, 3/8”, M2, M2.5, M3, M4 Screws | 【EXAMPLES OF USE】The m2.5 screw can be used for selected camera cage which locked with m2.5 screw on the side. The m3 and m4 screw can be used for ARRI rosette, etc

HIGH QUALITY MODEM CABLE: Typically used to transfer data from one PC directly to another PC. This male to female serial cable is solidly constructed, UL rated and RoHS Compliant. | HIGH QUALITY COMPONENTS: High quality serial cable features PVC hood and foil-shields while the contacts are gold-plated for maximum connectivity and signal transfer. The pins on these cables are gold-plated to avoid erosion and provided a reliable signal between devices. The 4-40 thumb screws ensure a secure connection that will not easily loosen. | COMPATIBLE DESIGN: We carry an assortment of serial DB9 cables and gender connectors for connecting your computer to peripheral devices. Peripheral devices include everyday computer equipment including modem, printers, networks, and more. | AVALABLE IN MULTIPLE LENGTHS: Choose the length that fits your cable requirement. Neither too long to wrap extra wire in a coil, nor too short that fails to reach your connection point. Select the right length to avoid extra cluttering. | LIFETIME WARRANTY: We are proud to offer lifetime warranty on our cables, adaptors and on most of our products.

【1】Adapter Using ultra precision CNC machine tools,sophisticated material,high intensity,good operation stability,this Camera Lens Adapter is made of high quality aluminum alloy,durable,non deformation,also with corrosion resistant and glossy. | 【2】AMOTOK The ring adapter easily screws onto the front of any 37mm lens,and converts the thread size of your lens to the thread size of any other 46mm accessory(such as filters,hoods,flashes and lens converters),and other 46mm accessories. | 【3】Compatible with:all 37mm camera lenses & 46mm accessories(UV,CPL,ND,Lens Hood,Threaded Lens).Your lens thread size will be printed underneath your lens cap or written somewhere on the lens barrel.This number is always prefixed by a"O"(diameter) symbol.For example:Ø37mm=37mm lens thread.This number can be found on the back of your lens cap.Make sure you order the correct size otherwise it will not fit your lens. | 【4】The first number of an adapter ring is always the lens thread size,the second number is the filter size of the accessory.If the first number is bigger,it's a Step-down ring What is a step up ring?Step up rings,also known as adaptor rings,allow you to use filters and accessories that are not the same size as your cameras lens. | 【Notice】37mm lens: Make sure your Camera lens size is 37mm, and the filter size is 46mm, so choose the 37-46mm adapter ring, but not 46-37mm adapter ring.

【Function】Transform caliber adapter ring,can be mounted to the front of the lens to achieve different diameter share the same lens diameter filter,lens hood,additional lens and other accessories.The purpose is to increase the diameter of the lens.Change the filter or adapter or lens or other size from 46mm to 62mm. | 【Compatible with】 Compatiable For: To the side of the lens: 46mm (All Brands Ø46mm),To the side of the filter thread: 62mm (All Brands Ø62mm). Your lens thread size will be printed underneath your lens cap or written somewhere on the lens barrel. Make sure you order the correct size otherwise it will not fit your lens. | 【High Quality】CNC MACHINED ADAPTER RING: We manufacture this step-up ring with and then apply a matte black electroplated finish, which withstands corrosion and other abrasive elements often encountered in outdoor photography. | 【Product Description】AMOPOFO The first number of an adapter ring is always the lens thread size, the second number is the filter size of the accessory. If the first number is bigger, it's a step-down ring What is a step up ring? Step up rings, also known as adaptor rings, allow you to use filters and accessories that are not the same size as your cameras lens. Lenses a ND UV CPL come in a large range of types and sizes and unfortunately they don't always fit together correctly. | 【Note】 Why Choose AMOPOFO? professional camera accessory manufacturer. Dedicated to provide products in high quality & good price. Made of metal sealing ring, much tighter. Laser fonts, much durable Meet.

【1】Adapter Using ultra precision CNC machine tools,sophisticated material,high intensity,good operation stability,this Camera Lens Adapter is made of high quality aluminum alloy,durable,non deformation,also with corrosion resistant and glossy. | 【2】AMOTOK The ring adapter easily screws onto the front of any 30.5mm lens,and converts the thread size of your lens to the thread size of any other 37mm accessory(such as filters,hoods,flashes and lens converters),and other 37mm accessories. | 【3】Compatible with:all 30.5mm camera lenses & 37mm accessories(UV,CPL,ND,Lens Hood,Threaded Lens).Your lens thread size will be printed underneath your lens cap or written somewhere on the lens barrel.This number is always prefixed by a"O"(diameter) symbol.For example:Ø30.5mm=30.5mm lens thread.This number can be found on the back of your lens cap.Make sure you order the correct size otherwise it will not fit your lens. | 【4】The first number of an adapter ring is always the lens thread size,the second number is the filter size of the accessory.If the first number is bigger,it's a Step-down ring What is a step up ring?Step up rings,also known as adaptor rings,allow you to use filters and accessories that are not the same size as your cameras lens. | 【Notice】30.5mm lens: Make sure your Camera lens size is 30.5mm, and the filter size is 37mm, so choose the 30.5-37mm adapter ring, but not 37-30.5mm adapter ring.

【1】Adapter Using ultra precision CNC machine tools,sophisticated material,high intensity,good operation stability,this Camera Lens Adapter is made of high quality aluminum alloy,durable,non deformation,also with corrosion resistant and glossy. | 【2】AMOTOK The ring adapter easily screws onto the front of any 30.5mm lens,and converts the thread size of your lens to the thread size of any other 49mm accessory(such as filters,hoods,flashes and lens converters),and other 49mm accessories. | 【3】Compatible with:all 30.5mm camera lenses & 49mm accessories(UV,CPL,ND,Lens Hood,Threaded Lens).Your lens thread size will be printed underneath your lens cap or written somewhere on the lens barrel.This number is always prefixed by a"O"(diameter) symbol.For example:Ø30.5mm=30.5mm lens thread.This number can be found on the back of your lens cap.Make sure you order the correct size otherwise it will not fit your lens. | 【4】The first number of an adapter ring is always the lens thread size,the second number is the filter size of the accessory.If the first number is bigger,it's a Step-down ring What is a step up ring?Step up rings,also known as adaptor rings,allow you to use filters and accessories that are not the same size as your cameras lens. | 【Notice】30.5mm lens: Make sure your Camera lens size is 49mm, and the filter size is 49mm, so choose the 30.5-49mm adapter ring, but not 49-30.5mm adapter ring.

【High Quality】Professional manufacturing, exquisite workmanship, this Camera Lens Adapter is made of high quality aluminum alloy, durable, non deformation, also with corrosion resistant and glossy.Extinction method: professional-grade lens matt paint on the inner wall .External coating: black part hard oxidation process | 【Unique Design】AMOPOFO Transform caliber adapter ring, can be mounted to the front of the lens to achieve different diameter share the same lens diameter filter, lens hood, additional lens and other accessories. The purpose is to increase the diameter of the lens. Besides for making financial sense, this allows you to use your favorite lens across different size UV,ND,CPL , the lens adapter is designed to fit securely to the lens, yet can still be removed easily when not needed. | 【Suitable】Canon,Nikon,sony,Fuji,Sigma, Tamron Camera Compatible with all 67mm camera lenses & 46mm accessories. Your lens thread size will be printed underneath your lens cap or written somewhere on the lens barrel. Make sure you order the correct size otherwise it will not fit your lens. | 【Product Description】:The first number of an adapter ring is always the lens thread size, the second number is the filter size of the accessory. If the first number is bigger, it's a step-down ring What is a step up ring? Step up rings, also known as adaptor rings, allow you to use filters and accessories that are not the same size as your cameras lens. Lenses aND UV CPL come in a large range of types and sizes and unfortunately they don't always fit together correctly. | 【Note】 Why Choose AMOPOFO Brand Concept？ professional camera accessory manufacturer. Dedicated to provide products in high quality & good price. Made of metal sealing ring, much tighter. Laser fonts, much durable Meet Environmental Standards of RoHS

【Function】Transform caliber adapter ring,can be mounted to the front of the lens to achieve different diameter share the same lens diameter filter,lens hood,additional lens and other accessories.The purpose is to increase the diameter of the lens.Change the filter or adapter or lens or other size from 46mm to 58mm. | 【Compatible with】 Compatiable For: To the side of the lens: 46mm (All Brands Ø46mm),To the side of the filter thread: 58mm (All Brands Ø58mm). Your lens thread size will be printed underneath your lens cap or written somewhere on the lens barrel. Make sure you order the correct size otherwise it will not fit your lens. | 【High Quality】CNC MACHINED ADAPTER RING: We manufacture this step-up ring with and then apply a matte black electroplated finish, which withstands corrosion and other abrasive elements often encountered in outdoor photography. | 【Product Description】AMOPOFO The first number of an adapter ring is always the lens thread size, the second number is the filter size of the accessory. If the first number is bigger, it's a step-down ring What is a step up ring? Step up rings, also known as adaptor rings, allow you to use filters and accessories that are not the same size as your cameras lens. Lenses a ND UV CPL come in a large range of types and sizes and unfortunately they don't always fit together correctly. | 【Note】 Why Choose AMOPOFO? professional camera accessory manufacturer. Dedicated to provide products in high quality & good price. Made of metal sealing ring, much tighter. Laser fonts, much durable Meet.

【Function】Transform caliber adapter ring,can be mounted to the front of the lens to achieve different diameter share the same lens diameter filter,lens hood,additional lens and other accessories.The purpose is to increase the diameter of the lens.Change the filter or adapter or lens or other size from 43mm to 55mm. | 【Compatible with】 Compatiable For: To the side of the lens: 43mm (All Brands Ø43mm),To the side of the filter thread: 55mm (All Brands Ø55mm). Your lens thread size will be printed underneath your lens cap or written somewhere on the lens barrel. Make sure you order the correct size otherwise it will not fit your lens. | 【High Quality】CNC MACHINED ADAPTER RING: We manufacture this step-up ring with and then apply a matte black electroplated finish, which withstands corrosion and other abrasive elements often encountered in outdoor photography. | 【Product Description】AMOPOFO The first number of an adapter ring is always the lens thread size, the second number is the filter size of the accessory. If the first number is bigger, it's a step-down ring What is a step up ring? Step up rings, also known as adaptor rings, allow you to use filters and accessories that are not the same size as your cameras lens. Lenses a ND UV CPL come in a large range of types and sizes and unfortunately they don't always fit together correctly. | 【Note】 Why Choose AMOPOFO? professional camera accessory manufacturer. Dedicated to provide products in high quality & good price. Made of metal sealing ring, much tighter. Laser fonts, much durable Meet.

Reset HDD Button Switch with Dual USB Ports,Power Button, Audio Ports for Desktop Computer Case,Making Power Computer much easier. Located computer in a hard to reach area , this is a convenient switch on the desk and hitting it rather than bend down to turn the computer on. | External power button for pc Works Fine as A Replacement for Broken Case Switch and Unresponsive Touchscreen on the Host.Saving money and energy to repair the host switch | Remote PC Power Switch,it is a better a choice if you need to hide a computer and need to get to the button on an extension cord.3 Functions in One Switch. There Are 2 Buttons, 2 USB and audio sockets on the Switch. | The Desktop Computer Case Switch is More convenience and more easy to power on your PC if it's not located in an easy-to-reach place or your Desktop Computer Case does not work anymore. | Simple to install, just check your motherboard's website for a manual on where to connect it, or simply remove the front panel connectors one by one, replacing them with those provided by the switch is great with adhesive sticky pads on the bottom, a hard drive activity light and 2 USB ports.

Upright graphics card accessories for O11D EVO XL | New mounting angle for GPU opens room for unrestricted chimney-style configuration. | Designed for large GPUs such as 40 series GPUs | Riser Cable Not Included

Take out your lens from your camera body. | Mount the adapter ring to your camera body. | Reverse your lens with filter thread and screw it to the adapter ring until it is tight. | Note: Autofocus,automatic diaphragm (AE metering),and other functions dependent on communication between camera body and lens will be disrupted with this reverse ring mounting on the camera body. | Compatible with for Sony A6500 A6300 A5100 A6000 A5000 A3000 NEX-5T NEX-3N NEX-6 NEX-5R NEX-F3 NEX-7 NEX-5N NEX-5C NEX-C3 NEX-3 NEX-5 A7RIII A9 A7III A7 A7s A7R A7II A7RII A7SII camera | Compatible with For Nikon 58mm Lens: AF-SNikkor35mmf/1.8GED, AF-SDX Nikkor 55-300mmf/4.5-5.6GEDVR, AF-S50mmf/1.8G, AF-PDX Nikkor 70-300mmf/4.5-6.3GEDVR, AF-SNikkor50mmf/1.4G, AF-PDX Nikkor 70-300mmf/4.5-6.3GED, AF 28-80mmf/3.3-5.6G, AF-SNikkor50mmf/1.8G, | Compatible with For Canon 58mm Lens: EF 22-55mmf/4-5.6USM, EF 100-300mmf/5.6L, EF 75-300mmf/4-5.6IIUSM, EF-S 18-55mmf/3.5-5.6ISSTM, TS-E90mmf/2.8, EF 90-300mmf/4.5-5.6USM, EF-S 18-55mmf/3.5-5.6IS, EF 28-105mmf/3.5-4.5IIUSM, EF-S 55-250mmf/4-5.6ISSTM, EF-S 18-55mmf/4-5.6ISSTM, EF100mm/2USM, EF28mmf/2.8ISUSM, EF-S 55-250mmf/4-5.6ISII, EF-S 18-55mmf/3.5-5.6, EF 28-90mmf/4-5.6Ⅲ, EF 28-80mmf/3.5-5.6IVUSM, EF 70-210mmf/4, EF28mmf/1.8USM, EF100mmf/2.8USM, | EF-S 18-55mmf/3.5-5.6ISII, EF 70-300mmf/4.5-5.6DOISUSM, EF 75-300mmf/4-5.6I, EF50mmf/1.4USM, MP-E65mmf/2.81-5X, EF85mmf/1.8USM, EF 100-300mmf/4.5-5.6USM, EF24mmf/2.8ISUSM, EF 28-105mmf/4-5.6USM, EF-S 18-55mmf/3.5-5.6IIUSM, EF-S 55-250mmf/4-5.6IS,

EXTENDED WARRANTY - Unlike other power cords for radar detectors, Crossery, offers 2 Year warranty on Radar Detector Cable. | ADJUSTABLE POWER CORD LENGTH - extends 6' to 12' allows placement of Uniden R7 radar detector, escort redline 360c on your windshield radar mount or mirror mount. | COMPATIBLE WITH - Valentine One Gen2 Radar Detector, Escort radar detectors, Passport Radar Detectors, Uniden R7 radar detector | Also works with Escort Redline 360c radar detector, escort passport 9500ix, escort max 3, escort ixc, escort solo series, Beltronics Radar Detector | Power Cable Wire for valentine radar detector gen 2 V1 Gen2 Uniden R3 R7 R1 Beltronics Vector Pro Sti | Also for Escort Max 360c 360 3 ixc, Passport 8500 9500ix Solo X80 S3 S2 redline radar detectors. | Power Cord for Telephone Style RJ11 for Uniden, Escort, Valentine One V1, Beltronics radar detector.

【High Quality】Professional manufacturing, exquisite workmanship, this Camera Lens Adapter is made of high quality aluminum alloy, durable, non deformation, also with corrosion resistant and glossy.Extinction method: professional-grade lens matt paint on the inner wall .External coating: black part hard oxidation process | 【Unique Design】AMOPOFO Transform caliber adapter ring, can be mounted to the front of the lens to achieve different diameter share the same lens diameter filter, lens hood, additional lens and other accessories. The purpose is to increase the diameter of the lens. Besides for making financial sense, this allows you to use your favorite lens across different size UV,ND,CPL , the lens adapter is designed to fit securely to the lens, yet can still be removed easily when not needed. | 【Suitable】Canon,Nikon,sony,Fuji,Sigma, Tamron Camera Compatible with all 46mm camera lenses & 55mm accessories. Your lens thread size will be printed underneath your lens cap or written somewhere on the lens barrel. Make sure you order the correct size otherwise it will not fit your lens. | 【Product Description】:The first number of an adapter ring is always the lens thread size, the second number is the filter size of the accessory. If the first number is bigger, it's a step-down ring What is a step up ring? Step up rings, also known as adaptor rings, allow you to use filters and accessories that are not the same size as your cameras lens. Lenses aND UV CPL come in a large range of types and sizes and unfortunately they don't always fit together correctly. Fortunately there is a st | 【Note】 Why Choose AMOPOFO Brand Concept？ professional camera accessory manufacturer. Dedicated to provide products in high quality & good price. Made of metal sealing ring, much tighter. Laser fonts, much durable Meet Environmental Standards of RoHS

【1】Professional manufacturing,exquisite workmanship,this Camera Lens Adapter is made of high quality aluminum alloy,durable,non deformation,also with corrosion resistant and glossy. | 【2】AMOTOK The ring adapter easily screws onto the front of any 55mm lens,and converts the thread size of your lens to the thread size of any other 52mm accessory(such as filters,hoods,flashes and lens converters),and other 52mm accessories. | 【3】Compatible with:all 55mm camera lenses & 52mm accessories(UV,CPL,ND,Lens Hood,Threaded Lens).Your lens thread size will be printed underneath your lens cap or written somewhere on the lens barrel.This number is always prefixed by a"O"(diameter) symbol.For example:Ø55=55mm lens thread.This number can be found on the back of your lens cap.Make sure you order the correct size otherwise it will not fit your lens. | 【4】The first number of an adapter ring is always the lens thread size,the second number is the filter size of the accessory.If the first number is bigger,it's a step-down ring What is a step up ring?Step up rings,also known as adaptor rings,allow you to use filters and accessories that are not the same size as your cameras lens. | 【5】Professional camera accessory manufacturer.Dedicated to provide products in high quality & good price.Made of metal sealing ring,much tighter.Laser fonts,much durable.100% Satisfaction Guaranteed.

【Compatible with】 Compatiable For: To the side of the lens: 52mm (All Brands Ø52mm),To the side of the filter thread:62mm (All Brands Ø62mm). Your lens thread size will be printed underneath your lens cap or written somewhere on the lens barrel. Make sure you order the correct size otherwise it will not fit your lens. | 【High Quality】CNC MACHINED ADAPTER RING: We manufacture this step-up ring with and then apply a matte black electroplated finish, which withstands corrosion and other abrasive elements often encountered in outdoor photography. | 【Product Description】:The first number of an adapter ring is always the lens thread size, the second number is the filter size of the accessory. If the first number is bigger, it's a step-down ring What is a step up ring? Step up rings, also known as adaptor rings, allow you to use filters and accessories that are not the same size as your cameras lens. Lenses aND UV CPL come in a large range of types and sizes and unfortunately they don't always fit together correctly. | 【Note】 Why Choose AMOPOFO Brand Concept？ professional camera accessory manufacturer. Dedicated to provide products in high quality & good price. Made of metal sealing ring, much tighter. Laser fonts, much durable Meet.

【1】Adapter Using ultra precision CNC machine tools,sophisticated material,high intensity,good operation stability,this Camera Lens Adapter is made of high quality aluminum alloy,durable,non deformation,also with corrosion resistant and glossy. | 【2】AMOTOK The ring adapter easily screws onto the front of any 30mm lens,and converts the thread size of your lens to the thread size of any other 58mm accessory(such as filters,hoods,flashes and lens converters),and other 58mm accessories. | 【3】Compatible with:all 30mm camera lenses & 58mm accessories(UV,CPL,ND,Lens Hood,Threaded Lens).Your lens thread size will be printed underneath your lens cap or written somewhere on the lens barrel.This number is always prefixed by a"O"(diameter) symbol.For example:Ø30mm=30mm lens thread.This number can be found on the back of your lens cap.Make sure you order the correct size otherwise it will not fit your lens. | 【4】The first number of an adapter ring is always the lens thread size,the second number is the filter size of the accessory.If the first number is bigger,it's a Step-down ring What is a step up ring?Step up rings,also known as adaptor rings,allow you to use filters and accessories that are not the same size as your cameras lens. | 【Notice】30mm lens: Make sure your Camera lens size is 30mm, and the filter size is 58mm, so choose the 30-58mm adapter ring, but not 58-30mm adapter ring.

Take out your lens from your camera body. | Mount the adapter ring to your camera body. | Reverse your lens with filter thread and screw it to the adapter ring until it is tight. | Note: Autofocus,automatic diaphragm (AE metering),and other functions dependent on communication between camera body and lens will be disrupted with this reverse ring mounting on the camera body. | a.You have a for Sony E mount camera,below are some of the E mount cameras for your reference: | Compatible with For Sony A6500 A6300 A5100 A6000 A5000 A3000 NEX-5T NEX-3N NEX-6 NEX-5R NEX-F3 NEX-7 NEX-5N NEX-5C NEX-C3 NEX-3 NEX-5 A7RIII A9 A7III A7 A7s A7R A7II A7RII A7SII | b.You have a lens with 52mm filter thread, below are some of the lens(Mounts Any lenses with Ø 52mm filter thread to a micro E-Series Camera) | Compatible with For Canon 52mm Lens: EF100mmf/2.8, EF135mmf/2.8, EF200mmf/2LISUSM, EF28mmf/2.8, EF300mmf/2.8LISIIUSM, EF300mmf/2.8LISIIUSM, EF300mmf/2.8LISUSM, EF 35-80mmf/4-5.6II, EF35mmf/ 2, EF400mmf/2.8LISIUSM, EF400mmf/2.8LISIIIUSM, EF400mmf/2.8LISUSM, EF400mmf/4DOISIIUSM, EF400mmf/4DOISUSM, EF40mmf/2.8STM, EF500mmf/4LISUSM, EF50mmf/1.8l, EF50mmf/2.5, EF 55-200mmf/4.5-5.6IIUSM, EF600mmf/4LISIIIUSM, EF600mmf/4LISUSM, EF800mmf/5.6LISUSM, EF-M 18-55mmf/3.5-5.6ISSTM, EF-M 55-200mm/4.5-6.3ISSTM, EF-M 55-200mmf/4.5-6.3ISSTM, EF-S60mmf/2.8USM, RF35mmf/1.8MacroISSTM, | Compatible with For Nikon 52mm Lens: 300mmf/2.8GED-IF II, 35-105mmf/3.5-4.5, AFMicroNikkor105mmf/2.8D, AFNikkor24mmf/2.8D, AFNikkor28mmf/2.8D, AFNikkor35mmf/2D, AFNikkor50mmf/1.4D, AFNikkor50mmf/1.8D, AF-S400mmf/2.8DIF-EDI I, AF-S400mmf/2.8GEDVR, AF-S500mmf/4DIF-EDI I, AF-S500mmf/4GEDVR, AF-S600mmf/4DIF-EDI I, AF-S600mmf/4GEDVR, | Compatible with For Nikon 52mm Lens: AF-SDX 18-55mmf/3.5-5.6GEDⅡ, AF-SDX 18-55mmf/3.5-5.6GVR, AF-SDX 55-200mmf/4-5.6GED, AF-SDXNikkor35mmf/1.8G, AF-SDXNikkor40mmf/2.8G, AF-SDX Nikkor 55-200mmf/4-5.6GEDVRII, AF-SDX Nikkor 55-200mmf/4-5.6GIF-E DVR, AF-SDXNikkor85mmf/3.5GEDVR, AF-S Nikkor 200-400mmf/4GEDVRII, AF-SNIKKOR200mmf/2EFLEDVR, AF-SNikkor200mmf/2GEDVRII, AF-SNikkor300mmf/2.8GEDVRⅡI, AF-SNikkor800mmf/5.6EFLEDVR, AF-SVR 200-400mmf/4GIF-ED

【1】Adapter Using ultra precision CNC machine tools,sophisticated material,high intensity,good operation stability,this Camera Lens Adapter is made of high quality aluminum alloy,durable,non deformation,also with corrosion resistant and glossy. | 【2】AMOTOK The ring adapter easily screws onto the front of any 58mm lens,and converts the thread size of your lens to the thread size of any other 40.5mm accessory(such as filters,hoods,flashes and lens converters),and other 40.5mm accessories. | 【3】Compatible with:all 58mm camera lenses & 40.5mm accessories(UV,CPL,ND,Lens Hood,Threaded Lens).Your lens thread size will be printed underneath your lens cap or written somewhere on the lens barrel.This number is always prefixed by a"O"(diameter) symbol.For example:Ø58mm=58mm lens thread.This number can be found on the back of your lens cap.Make sure you order the correct size otherwise it will not fit your lens. | 【4】The first number of an adapter ring is always the lens thread size,the second number is the filter size of the accessory.If the first number is bigger,it's a Step-down ring What is a step up ring?Step up rings,also known as adaptor rings,allow you to use filters and accessories that are not the same size as your cameras lens. | 【Notice】58mm lens: Make sure your Camera lens size is 58mm, and the filter size is 40.5mm, so choose the 58-40.5mm adapter ring, but not 40.5-58mm adapter ring.

New BR-3057L Replacement Remote Control Applicable for Optoma Projector DS551 DX550 TS551 TX551 DX551 DS550 TX631-3D TW631-3D | No programming or paring is needed.Just install new batteries and it is ready for use. | Power Supply: 2X 1.5V AAA Alkaline Battery. Batteries and manual are not included. | Please feel free to contact us if you have any query, thanks!

【1】Professional manufacturing,exquisite workmanship,this Camera Lens Adapter is made of high quality aluminum alloy,durable,non deformation,also with corrosion resistant and glossy.Extinction method:professional-grade lens matt paint on the inner wall.External coating:black part hard oxidation process. | 【2】AMOTOK The ring adapter easily screws onto the front of any 58mm lens,and converts the thread size of your lens to the thread size of any other 52mm accessory(such as filters,hoods,flashes and lens converters),and other 52mm accessories.The purpose is to increase the diameter of the lens.yet can still be removed easily when not needed. | 【3】Compatible with:all 58mm camera lenses & 52mm accessories(UV,CPL,ND,Lens Hood,Threaded Lens).Your lens thread size will be printed underneath your lens cap or written somewhere on the lens barrel.This number is always prefixed by a"O"(diameter) symbol.For example:Ø58=58mm lens thread.This number can be found on the back of your lens cap.Make sure you order the correct size otherwise it will not fit your lens. | 【4】The first number of an adapter ring is always the lens thread size,the second number is the filter size of the accessory.If the first number is bigger,it's a step-down ring What is a step up ring?Step up rings,also known as adaptor rings,allow you to use filters and accessories that are not the same size as your cameras lens. | 【5】 Why Choose AMOTOK Brand?professional camera accessory manufacturer.Dedicated to provide products in high quality & good price.Made of metal sealing ring,much tighter.Laser fonts,much durable.

【1】Adapter Using ultra precision CNC machine tools,sophisticated material,high intensity,good operation stability,this Camera Lens Adapter is made of high quality aluminum alloy,durable,non deformation,also with corrosion resistant and glossy. | 【2】AMOTOK The ring adapter easily screws onto the front of any 52mm lens,and converts the thread size of your lens to the thread size of any other 46mm accessory(such as filters,hoods,flashes and lens converters),and other 46mm accessories. | 【3】Compatible with:all 52mm camera lenses & 46mm accessories(UV,CPL,ND,Lens Hood,Threaded Lens).Your lens thread size will be printed underneath your lens cap or written somewhere on the lens barrel.This number is always prefixed by a"O"(diameter) symbol.For example:Ø52mm=52mm lens thread.This number can be found on the back of your lens cap.Make sure you order the correct size otherwise it will not fit your lens. | 【4】The first number of an adapter ring is always the lens thread size,the second number is the filter size of the accessory.If the first number is bigger,it's a Step-down ring What is a step up ring?Step up rings,also known as adaptor rings,allow you to use filters and accessories that are not the same size as your cameras lens. | 【Notice】52mm lens: Make sure your Camera lens size is 52mm, and the filter size is 46mm, so choose the 52-46mm adapter ring, but not 46-52mm adapter ring.

🌱Small and flexible Raspberry Pi microcontroller: Equip with featured tiny RP2040 microcontroller chip with 30 GPIO pins | 🌱Wireless Connection Supported: Incorporate Wi-Fi IEEE 802.11 b/g/n wireless LAN, as well as Bluetooth 5.2 connection | 🌱Relatively low price for high performance: Best price ratio for one wireless microcontroller represented by Raspberry Pi | 🌱 Simple easy to use: Drag & drop programming using mass storage over a USB through MicroPython | 🌱Designed for beginners/children: Provide tons of projects/tutorials, allowing for quick positive programming feedback, getting started well with electronics

【Durable Materials】Metal materials for well made, allowing not easy to break and bend. Boost the signal as need anywhere you use walkie talkies. Fit well with radios, better connection. | 【Business Radio Antenna】Great replacement antenna for the walkie talkie. | 【SMA Connector】Connector SMA Female for convenient use. Maximum Power Rating: 10 watts, Working Temperature: 22℉~140℉ / -30℃~60℃. | 【Frequency & Length】Single band antenna with UHF frequency 406.1-470 MHz, Antenna Length : 6inch Diameter: 0.55 inches Weight:12.2g | 【Compatibility】Work with the following portable radios: SAMCOM FPCN10A FPCN30A FPEN10A Walkie Talkie, works great with most two-way radios within this frequency range.

【High Quality】Professional manufacturing, exquisite workmanship, this Camera Lens Adapter is made of high quality aluminum alloy, durable, non deformation, also with corrosion resistant and glossy.Extinction method: professional-grade lens matt paint on the inner wall .External coating: black part hard oxidation process | 【Unique Design】AMOPOFO The Reverse Mount Ring allows you to mount a Mounts lenses with Ø 49mm filter thread to a Sony E-Series Camera. Besides for making financial sense, this allows you to use your favorite lens across different camera platforms, the Reverse Mount Ring is designed to fit securely to the lens, yet can still be removed easily when not needed. | 【 Suitale For】 Sony A6500 A6300 A5100 A6000 A5000 A3000 NEX-5T NEX-3N NEX-6 NEX-5R NEX-F3 NEX-7 NEX-5N NEX-5C NEX-C3 NEX-3 NEX-5 A7RIII A9 A7III A7 A7s A7R A7II A7RII A7SII (NOTE: Full-frame camera maybe have black-corners) Mounts Any lenses with Ø 49mm filter thread to a Sony E-Series Camera | 【NOTICE】:Autofocus, automatic aperture and AE metering will be DISABLED. Need to focus manually and set exposures manually. Shoot with manual mode or aperture priority mode.

【High Quality】Professional manufacturing, exquisite workmanship, this Camera Lens Adapter is made of high quality aluminum alloy, durable, non deformation, also with corrosion resistant and glossy.Extinction method: professional-grade lens matt paint on the inner wall .External coating: black part hard oxidation process | 【Unique Design】AMOPOFO Transform caliber adapter ring, can be mounted to the front of the lens to achieve different diameter share the same lens diameter filter, lens hood, additional lens and other accessories. The purpose is to increase the diameter of the lens. Besides for making financial sense, this allows you to use your favorite lens across different size UV,ND,CPL , the lens adapter is designed to fit securely to the lens, yet can still be removed easily when not needed. | 【Suitable】Compatible with all 49mm camera lenses & 52mm accessories. Your lens thread size will be printed underneath your lens cap or written somewhere on the lens barrel. Make sure you order the correct size otherwise it will not fit your lens. | 【Product Description】:The first number of an adapter ring is always the lens thread size, the second number is the filter size of the accessory. If the first number is bigger, it's a step-down ring What is a step up ring? Step up rings, also known as adaptor rings, allow you to use filters and accessories that are not the same size as your cameras lens. Lenses aND UV CPL come in a large range of types and sizes and unfortunately they don't always fit together correctly. | 【Note】 Why Choose AMOPOFO Brand Concept？ professional camera accessory manufacturer. Dedicated to provide products in high quality & good price. Made of metal sealing ring, much tighter. Laser fonts, much durable Meet Environmental Standards of RoHS

【High Quality】Professional manufacturing, exquisite workmanship, this Camera Lens Adapter is made of high quality aluminum alloy, durable, non deformation, also with corrosion resistant and glossy.Extinction method: professional-grade lens matt paint on the inner wall .External coating: black part hard oxidation process, silver part composite plating. | 【Focus】Full manual operation, manual focus, manual adjustable aperture. Can achieve manual exposure with camera body and preferred aperture exposure.We state “It support focus infinity.” because our adapters are designed to be universal which can prevent some lenses from focusing to infinity at the infinity mark. | 【Unique Design】The lens adapter allows you to mount a Leica L39 M39 39mm Mount Lens to a Fuji X Mount cameras. Besides for making financial sense, this allows you to use your favorite lens across different camera platforms, the lens adapter is designed to fit securely to the lens, yet can still be removed easily when not needed. | 【Suitable】Lens: Leica L39 M39 39mm Mount Lens Cameras: Supports Fuji X Mount cameras (Fujifilm X100,X10,X-S1,X-Pro1,X-E1,XF1,X20,X100S,X-M1,X-A1, X-E2,XQ1,X-T1,X30, X100T,X-A2,XQ2,X-T10,X-Pro2,X-E2s,X70,X-T2, X-A3, X-A10, X100F, X-T20, X-E3, X-A5, X-H1, X-T100) Not suitable for Fuji film S2 Pro, S3 Pro, S5 Pro or other Fuji film | 【NOTICE】:Autofocus, automatic aperture and AE metering will be DISABLED. Need to focus manually and set exposures manually. Shoot with manual mode or aperture priority mode. Turn on "Release without lens" mode before use.

【High Quality】Professional manufacturing, exquisite workmanship, this Camera Lens Adapter is made of high quality aluminum alloy, durable, non deformation, also with corrosion resistant and glossy.Extinction method: professional-grade lens matt paint on the inner wall .External coating: black part hard oxidation process | 【Unique Design】AMOPOFO Transform caliber adapter ring, can be mounted to the front of the lens to achieve different diameter share the same lens diameter filter, lens hood, additional lens and other accessories. The purpose is to increase the diameter of the lens. Besides for making financial sense, this allows you to use your favorite lens across different size UV,ND,CPL , the lens adapter is designed to fit securely to the lens, yet can still be removed easily when not needed. | 【Suitable】Canon,Nikon,sony,Fuji,Sigma, Tamron Camera Compatible with all 37mm camera lenses & 40.5mm accessories. Your lens thread size will be printed underneath your lens cap or written somewhere on the lens barrel. Make sure you order the correct size otherwise it will not fit your lens. | 【Product Description】:The first number of an adapter ring is always the lens thread size, the second number is the filter size of the accessory. If the first number is bigger, it's a step-down ring What is a step up ring? Step up rings, also known as adaptor rings, allow you to use filters and accessories that are not the same size as your cameras lens. Lenses aND UV CPL come in a large range of types and sizes and unfortunately they don't always fit together correctly. Fortunately there is a st | 【Note】 Why Choose AMOPOFO Brand Concept？ professional camera accessory manufacturer. Dedicated to provide products in high quality & good price. Made of metal sealing ring, much tighter. Laser fonts, much durable Meet Environmental Standards of RoHS

【High Quality】Professional manufacturing, exquisite workmanship, this Camera Lens Adapter is made of high quality aluminum alloy, durable, non deformation, also with corrosion resistant and glossy.Extinction method: professional-grade lens matt paint on the inner wall .External coating: black part hard oxidation process | 【Unique Design】AMOPOFO Transform caliber adapter ring, can be mounted to the front of the lens to achieve different diameter share the same lens diameter filter, lens hood, additional lens and other accessories. The purpose is to increase the diameter of the lens. Besides for making financial sense, this allows you to use your favorite lens across different size UV,ND,CPL , the lens adapter is designed to fit securely to the lens, yet can still be removed easily when not needed. | 【Suitable】Canon,Nikon,sony,Fuji,Sigma, Tamron Camera Compatible with all 37mm camera lenses & 55mm accessories. Your lens thread size will be printed underneath your lens cap or written somewhere on the lens barrel. Make sure you order the correct size otherwise it will not fit your lens. | 【Product Description】:The first number of an adapter ring is always the lens thread size, the second number is the filter size of the accessory. If the first number is bigger, it's a step-down ring What is a step up ring? Step up rings, also known as adaptor rings, allow you to use filters and accessories that are not the same size as your cameras lens. Lenses aND UV CPL come in a large range of types and sizes and unfortunately they don't always fit together correctly. Fortunately there is a st | 【Note】 Why Choose AMOPOFO Brand Concept？ professional camera accessory manufacturer. Dedicated to provide products in high quality & good price. Made of metal sealing ring, much tighter. Laser fonts, much durable Meet Environmental Standards of RoHS

【High Quality】Professional manufacturing, exquisite workmanship, this Camera Lens Adapter is made of high quality aluminum alloy, durable, non deformation, also with corrosion resistant and glossy.Extinction method: professional-grade lens matt paint on the inner wall .External coating: black part hard oxidation process | 【Unique Design】AMOPOFO The Reverse Mount Ring allows you to mount a Mounts lenses with Ø 52mm filter thread to a Sony Alpha A-Mount (and Minolta AF) Mount SLR Camera Body. Besides for making financial sense, this allows you to use your favorite lens across different camera platforms, the Reverse Mount Ring is designed to fit securely to the lens, yet can still be removed easily when not needed. | 【 Suitale For】Sony A350, A900, A230, A330, A380, A550, A500, A850, A450, A290, A390, A560, A580, A33, A55, A35, A65, A77, A57, A37, A99, A58, A77II Minolta Maxxum 5D, 7D, 7, 9xi, 7xi, 5xi Mounts Any lenses with Ø 52mm filter thread to a Sony Alpha A-Mount (and Minolta AF) Mount SLR Camera Body | 【NOTICE】:Autofocus, automatic aperture and AE metering will be DISABLED. Need to focus manually and set exposures manually. Shoot with manual mode or aperture priority mode.

You don’t need to change the Music with your fingers. This bluetooth remote control can scroll the pause/play Music APP. Next Prevtrack,Volume yp or down,mute etc. Of course, it is a good helper for you to take selfie or videos. | capture stunning photos&video remotely with easy - Say goodbye to blurry photos. Eliminate camera shake for razor crisp photos every time. Snap photos and Start/Stop video recording with the click of a button. | 【!!!You must read it if your device is Iphone or Ipad etc. IOS system devices】!!! TThe" Home "button not fit for Ios System like iphone ipad itouch. | It is follow ergonomic. Comfortable hand feeling. Pleasant sound of silicone keypad built-in light strength pot piece .High grade acrylic panel. Standby time more than one year | There is a call answer and end button

The RCA caps protect RCA from oxidation and signal interference, such as RF, RFI, EMI emissions. | They can also prevent dust & dirt from building up in unused open RCA connectors. | The RCA caps are made of brass and rhodium plated to ensure ultra shield and protection shield against,and of high quality. The middle pin can be removed. | It is designed for HIFI. | Package including 8 pieces.Warranty: 360 days

made from high quality material to last in weather conditions | For use with telephones, fax machines, modems, answering machines, etc. | Standard phone connectors on both ends | Connect two phone devices together or connect a phone to a wall jack | Universal 4-conductor design

This is 75 Ohm RG179 coaxial SDI Cable, which is used to connect any equipment with SDI input and output interfaces, such as Cameras or Monitors. It can be used for the transmission of RF and HD quality video signals, The 18 AWG gauge cable is FPE insulated and constructed with high density OFC braided shielding to reject both EMI and RF interference. | Supports HD-SDI, 3G-SDI Video signals, Suitable for Blackmagic Hyperdeck Shuttle,ARRI Cameras, RED Cameras, Atomos Monitors，SmallHD Monitors, Wireless image transmission equipment, 4K Video Camera, studios, mobile trucks, staging etc. | Plug A: Straight BNC Male Connector; Plug B: Right Angle BNC Male Connector. | Cable Length : 40cm/15.7inch (We can customize with other length, please contact us if you need). | Each cable we produce has been rigorously tested and is compatible with machines from a variety of major brand suppliers,We are committed to all the products are qualified and high-quality.

【Anti static brush】 One set has 8 pieces, this brush kit is a multi functional, multi shape, multi size brush kit. Anti static brush / cleaning brush / dust removal brush / tip handle brush / PCB board brush. | 【Multiple Scenario Use】 Suitable for cleaning hard to reach spaces, such as machines, razors, fish , mobile phones, printer, camera, computers, keyboards, binoculars, Motherboard, etc. | 【Easy to use】 The hand touch is comfortable and it is more convenient to clean. The brush is multi shape, multi size, supports thorough cleaning. It has a non slip curved handle, which is very suitable for your hand. | 【Easy to Carry】 The brush can be hung with rope wherever you want. The brush structure is simple, small in size and light in weight. Easy to install and maintain, to use. | 【Satisfaction Guarantee】 Buy with confidence. We offer customer satisfaction or conversion guarantee, if you have any questions, please feel to us.

【Wide Compatibility】This camera strap comes with two metal rings and a cowhide protective patch, making it compatible with most cameras including for Canon eos R6 R7 R6 Mark II R8 R10 R50 M50,for Fuji X100V XT3 XT5 XS10 XS20 XH-2S,for A6400 A6000 A6300 A6500 A6700 A7C II A7RII A7RIII A7 IV ZVE1 ZVE10,for Nikon Zf ZFC Z6 Z7 Z8 Z30 Z50 D3500 D3400 D3300 D3000 D5600 D5500 D7500 and more.(Note:Please check the picture we posted to ensure whether the eyelet is available before purchasing.) | 【Superior Protection】Crafted from high-quality,elastic,and durable nylon material with PU leather joints and metal rings for added strength and a retro look.This camera wrist strap provides extra durability and comfort during extended use. Strong metal buckles keep your beloved camera secured, ensuring it won't accidentally drop. | 【Adjustable & Comfortable】Our premium braided nylon hand strap features a soft and smooth texture that's gentle on the skin, with a low friction design that won't cause irritation.With a total length of 21cm and a diameter of 1.2cm, this wrist strap can be easily adjusted to fit your wrist size and preference, providing comfortable support during long photo shoots. | 【Effortlessly attach & detach cameras】Get one metal buckle for effortless installation and removal. With just a single click, you can easily attach or detach your camera and enjoy comfortable shooting without any hassle.Perfect for avid photography enthusiasts who love to shoot outdoors! | 【Best Gift Choice】Our wrist straps are available in 18 stylish colors, featuring a retro, simple, and lively design that complements your camera perfectly, making it a perfect gift for any occasion. From Christmas and Thanksgiving to Father's and Mother's Day, our camera strap is a thoughtful present for photography enthusiasts of all ages.