Capacity: 800mAh,Voltage: 3.6V,Battery Type:NI-MH AAA*3,Rechargeable:yes,Package included:3 x bt-446 battery for uniden cordless phone | Compatible with BT-446 BT-1005 Uniden TXC146 TXC400 TXC580 DCT646 DCX770 TCX800 TXC860A TCX950 UIP1868 TRU8885 TRU8888 TRU9460 TRU9465 TRU9480 TRU9485 Handset Phone | Compatible with Telephones: AT&T 3095 3470 Again & Again STB 961 STB961 Battery Biz B-7018 Bell South TL6502 TL-6502 Empire CPH-488B CPH488B Energizer ER-P512 ERP512 GE TL96402 TL26402 TL86402 TL-96402 TL-26402 TL-86402 Interstate TEL0375 | Compatible with Uniden Telephones: DCT646 DCT646-2 DCT646-3 DCT646-4 DCT646-5 DCT6465-2 DCT648-2 DCT648-3 DCT6485 DCT6485-2 DCT6485-3 DCT736 DCT737 DCT738 DCT746M DCT748 DCT748-2 DCT748-4 DCT7488 DCT7488-2 DCT7565 DCT758 DCX150 DCX210 DCX640 DCX700 DCX730 TCX800 TCX805 TCX860 TCX905 TCX930 TRU12803 TRU238 TRU446 TRU446-2 TRU448 TRU448-2 TRU4465 TRU4465-2 TRU4485 TRU448 TRU5860 TRU5860-2 TRU5865 TRU5865-2 TRU5885 TRU5885-2 TRU8860 TRU8860-2 TRU8865 TRU8865-2 TRU8866 TRU8880 TRU8880-2 TRU8885 | Compatible with Radio Shack Telephones: TAD-3704 TAD-3815 TAD-3872 TAD-3880 TAD-3898 ET-3580 ET-3581 43-5529 43-5560 43-5561 43-5562 43-5862 23-961 2300961 CS-90261

10GBase-CU, SFP+ to SFP+ Connetor, Passive,0.25m (0.82ft) , 30AWG, Purple , 1 Pack. The length of the cable includes the connectors at both ends. | Compatible with Cisco, Meraki, Ubiquit, Mikrotik, Intel, Fortinet, Netgear, D-Link, Supermicro, TP-Link, Quanta, Solarflare, PaloAlto, F5, etc. | All products are passed by TDR & VNA tests in our Signal Integrity Lab. | Widely used in data centers, storage area networks, Network Attached Storage, high performance computing, etc. | 30 days free-returned, exclusive FREE 3-year warranty and free lifetime technical support.

Fast Sync & Charging: Supports 3A fast charging and data syncing up to 480Mb/s. | Built to Last: The armor woven is wear-resistant and tensile resistant, with a bending life of over 30000 times. | Safe and Reliable: Compliant with USB-IF standards, providing safe and reliable charging for USB-C devices. | Universal Compatibility: Designed to work flawlessly with any device that uses a USB-C port. | What You Get: 5 × premium armor braided USB to USB-C Cable (3.3ft/3.3ft/6ft/6ft/10ft), a lifetime warranty, and our friendly customer service.

『SATA Power Cable for Hikvision Video Recorder』4 pin port connects to Hikvision video recorder ( Note: This is special 4 pin, only works with Hikvision video recorder as listed,Only works with Hikvision video recorder as listed. ), SATA port connects to hard drive HDD; | 『Connector』Connector A: 4 pin(Note: This is special 4 pin, only works with Hikvision video recorder as listed. ), Connector B: SATA female; | 『Compatibility』Only compatible with Hikvision video recorder such as:7100 series,D1 series(D1-108C),N1 series(N1-104),71 series(7104,7108,7116),DS76 series(DS7604n-e1/4p),DS78 series(DS7804n-k1),7808hgh,7816hgh,5108h,5116h,DH-NVR4208,NVR4216,2116H, 3100 series(DH-DVR3104); | 『Parameter』Gauge: 1007-18AWG(standard tin-coating copper wire), Length(including connectors): 7.5inches(19cm), Quantity: 2pcs, Self-adhesive tape*1pcs; | 『Note』This cable only works with Hikvision video recorder as listed. If you use other incompatible devices, it will definitely burn or damage the hard drive and we won’t take any responsibility for wrongly using or installing. Please carefully check the compatible types or contact us if you are not sure if it supports your power supply;

Hard EVA shell protects the Fujifilm Instax Mini Link 3 / Mini Link 2 Printer/Mini Link printer, HP Sprocket/ HP Sprocket Plus, Canon Ivy CLIQ/ Canon Ivy CLIQ+/ Canon Ivy CLIQ2/ Canon Ivy CLIQ+2/ Canon SELPHY QX10 Square Photo Printer from accidental bump, drop and scratch. Soft Interior protects the printer from everyday wear and tear. | The Inner Mesh Pocket which can fit extra cables and other small but essential accessories. | Built-in Elastic Strap to fasten the camera or printer, so it won't collide with other things while in the case. | Come with Strap, you can fix the storage case on your backpack, makes your printer easy to be carried and protected when camping, hiking, traveling. | Lightweight Design provide a comfortable carrying anytime and anywhere. All-around zipper for maximum protection, perfect for travel! (Official Micklyn Le Feuvre product.)

Specification: Color: Black; Material: Aluminum Alloy; Suitable for: all 27mm lenses and 37mm filters; Overall Size: 39x5.5mm/1.54x0.22inch(Dia.H); Male Thread: 27mm/1.06inch; Female Thread: 37mm/1.46inch; Package List: 2 x Filter Adapter Step Up Rings, 1 x Cleaning Cloth | Advantage: The adapter ring is made of aluminum alloy and coated with matte black electroplated coating, which can resist corrosion and other wear elements often encountered in outdoor photography. The package comes with a cleaning cloth, convenient for you to clean your adapter when you replace it. | The camera lens adapter ring can be installed in front of the lens, allowing you to use filters and accessories different from the size of the camera lens. The adapter ring can change-over lenses of various sizes, so that you can share the same filter, shutter, additional lens, etc. | Instruction: From left to right, the first number is the size of the male thread, and the second number is the size of the female thread. | NOTE: Please check the thread size of the lens adapter ring is suitable for your requirements before placing an order.

【Compatible Device】2 Pack quality tempered glass screen protector exclusively designed for ZZB 10.1” Tablet Model ZB10 / YQ10S. | 【Super Transparency】 Made of 9H hardness tempered glass, which is 3 times stronger than normal 3H hardness.ZZB screen protector can effectively protect screen from accidental scratches by keys, knife or other hard objects in daily use. | 【Super Transparency】99% transparency, anti-oil and anti-fingerprints.HD viewing experience. | 【High Definition and Touch Sensitive】Precise laser cut tempered glass made with polished, High transparency tempered glass highly compatible with the device to keep the original viewing experiences of ZZB tablet. | 【Easy to Apply】Bubble-free installation, only take seconds; Advanced silicon adhesive, no residue when removing.

Specification: Color: Blue; Material: Neoprene (covered with cloth); Buoyancy: 250gram / 8.81ounce; Strap Diameter: 2.5cm / 0.98"; Total Length: 30cm / 11.81"; Package List: 1 x Floating Wrist Straps | This floating wrist strap is mainly used to hang things like cameras, cellphones, mirrorless, keys, waterproof pouch or other small items. It is often widely used for swimming, snorkeling, underwater, beach, work, travel, outdoor sports, shopping and more. | Advantage: Made of waterproof and foam-filled neoprene material covered with cloth, and the buoyancy can be up to 250g. Moreover, it is soft and lightweight, you can carry it easily, and it fits your skin well, making you feel comfortable when you are swimming or diving. Designed with bright color style and quick-release connector, it is easily be found in the pools. A sturdy and durable quick release buckle is provided, which allows you to remove the wrist strap from the camera easily. | Instruction: Easy use: Attach it to your camera with quick-release connector, then loop the strap to your wrist. | NOTE: Please store it in the ventilated place to keep it dry after you using it.

Hard EVA shell protects the Fujifilm Instax Mini Link 3 / Mini Link 2 Printer/Mini Link printer, HP Sprocket/ HP Sprocket Plus, Canon Ivy CLIQ/ Canon Ivy CLIQ+/ Canon Ivy CLIQ2/ Canon Ivy CLIQ+2/ Canon SELPHY QX10 Square Photo Printer from accidental bump, drop and scratch. Soft Interior protects the printer from everyday wear and tear. | The Inner Mesh Pocket which can fit extra cables and other small but essential accessories. | Built-in Elastic Strap to fasten the camera or printer, so it won't collide with other things while in the case. | Come with Strap, you can fix the storage case on your backpack, makes your printer easy to be carried and protected when camping, hiking, traveling. | Lightweight Design provide a comfortable carrying anytime and anywhere. All-around zipper for maximum protection, perfect for travel!

Makes a wonderful shower gift and a perfect addition to any baby registry | Just peel, stick, and click a photo to document your baby's first year | Document and photograph baby's special milestones | Printed on white matte sticker paper so no glare in photos | Includes 12 precut stickers that are approximately 3.93 inches in diameter

【5.5mm*2.1mm Female to Male Connector】 Please notice this 30 ft extension cord will only work with power adapter with 2.1mm x 5.5mm plug size | 【Wide Compatibility】Used for Hiseeu wireless camera system, DVR, NVR, Router,Led String Strip, Audio Speaker, Printer, Fax Machine or any other brand devices with compatible plug size 5.5mm*2.1mm | 【30ft/10m Power Cable Specs】Power Extension Cable 30ft/10m, 20AWG, UL 2468 (UL Component), For DC power. Recommended up to 36 volt, max load 3 amp or less. | 【Premium Cooper Wire Quality】This power cable extension is made from high-quality pure copper material and has good conductivity, robustness, durability | 【12-month Warranty & Friendly Customer Support】 We provide a full warranty for 12 months of this12v extension cord, and our customer support will always stay with you

【Straight-through】All 37 pins are wired straight-through,The line sequence corresponds one-to-one with each other, without any cross or jumper wires.Output: 1-1,2-2,3-3,...... 36-36, 37-37, G-G. | 【Stable Transmission】The wire is made of tin plated copper, shielded with aluminum foil and double shielded with metal braided mesh, which has strong anti-interference ability and can be used stably for a long time during operation. | 【Quick Connection】One end of the DB37 cable is a female DB37 connector, and the other end is a female connector, Plug and play, no need to install any drivers, connection is very simple and fast. | 【Durable】Standard 37 pin gold-plated pin with zero contact loss. Wear resistant, anti-oxidation, and more durable. | 【Widely Compatibility】This RS232 Straight Through Cord could be widely use for computer or server connecting to the equipments with DB37 connector like scanner, Modem, printer, plotter, camera, bar-code/embroidery machine, touchscreen, micro-controller, industrial instrument etc.

【Multiple Collocation Ways】- The tablet wall mount consists of two parts, just like a pair of shoes. The width of the slot is 20 mm. Two sets per box (4pcs), It can store two phones at the same time or one phone and one tablet or two phones and one tablet. You can also use it alone. It is suitable for almost all mobile phones and tablets. There is a reserved charging port in the center of the slot. You can store your devices horizontally or vertically. | 【Good Compatibility】- It is universal for tablet and phone holder on the wall. It is compatible with Amazon Fire/ Samsung/ Android tablet and smart phone (iphone 8/ 8Plus/ X/ XS/ XR/ 11/ 11Pro/ 11Pro/ Max/ iphone12/ 12MINI/ iphone13/ 13Pro MAX/14/14Pro/ and more) and e-reader/ kindle/ . a space saving solution storage organizer. | 【Two Fixed Options】- screw and adhesive, the phone wall mount that you can choose which way to install according to your requirements, adhesive is suitable for use on smooth and flat walls, Damage-free, For example, marble walls/ wood walls/ glass walls/ tile walls, etc. If your wall is not smooth and flat, it is recommended that you choose screw installation. | 【Multiple Scenarios】-You can use phone wall mount and tablet wall mount for charge in the kitchen room while you're cooking, in the bedroom while you're sleeping, in the reading room while you're studying, in the bathroom while you're taking a shower, in the dressing room while you're putting on makeup. | 【What's in the Box】 - 2(set)*tablet wall mount(4pcs), 4*screw, 4* rubber plug, 4*adhesive.

Compatibility: The Silicone Skin is ONLY compatible with Apple Pencil 2nd Generation and makes the pencil easy to hold. | INSTALLATION INSTRUCTIONS: 1. Clean the Apple pencil 2nd.2, Insert the Apple pencil 2nd through the top of the hole near the cap (paying attention to the alignment of the flats) and slowly push the sleeve up until the pen is fully encased in the sleeve.3, Adjust and install the cap section. | Ultra thin Design: The double-tap feature works with the case on as it would normally so you can easily switch between writing and erasing. You can also magnetically attatch to your iPad to charge. (NOTE:You must remove your ipad case to charge the pen, otherwise, there may be effects.） | Full Protection: The silicone skin is made of premium material, soft and durable. Anti-scratches, shockproof, dustproof and washable. | Bright Colors: Variety colors and styles silicone sleeves for your Apple pencil 2nd.The Apple pencil 2nd Gen is not included.

USB to RS485 RS232 Converter: The product can support USB to RS232 and USB to RS485, but the two functions cannot be used at the same time.RS-485 flow control mode automatic flow control | Voltage：UBS 5 V | New Original Chip CH340，Transmission distance up to 1200 meters (tested at 9600bps) | Support baud rate RS232: 300bps-120kbps. RS485 ：300bps-1Mbps | Support win98/CE/2000/2003/2008/XP/WIN7/WIN8/WIN10/VISTA/LINUX/MAC OS X system, USB interface can be hot-swappable | Industrial grade protection: TVS transient suppression protection, ESD protection, surge protection, AB signal line shorting and shorting protection with power supply (shorting does not burn)

Colour: Black; Material: Aluminum Alloy, Optical Glass; Resistance Level: Not Water Resistant; ; | 1. Suits well with the lens and easy to maintain it's clarity. No distortion or discoloration, no glare. Does not add any visual-artifact to photos or videos. The photos taken are crystal clear. 2.This HD filter frame is only 3mm thick, no-vignetting, images are still clear even on telephoto-lenses. 3. It is equipped with a cleaning cloth, which can be used to clean the filter when it is stained with dust; and it has a box, which can be used for storage and easy to carry and store. | Instruction: The protector filter is threaded, screw the filter of the corresponding size directly in front of the lens. The caliber of the filter depends on the caliber of your lens, not the camera model. | Application: The filter can weaken the blue tone caused , prevent UVa/UVb from entering the lens and affect imaging, help improve image clarity and color effects, and protect the lens surface at the same time. Fixed on the lens to provide reasonable protection measures, suitable for all kinds of cameras, you don't have to worry about the expensive lens being damaged by mud, water and dust when shooting outdoors. | NOTE: Please verify your camera's lens thread size before ordering (usually marked somewhere on the lens barrel or printed under the lens cap)

【𝐌𝐅𝐢 𝐂𝐞𝐫𝐭𝐢𝐟𝐢𝐞𝐝 𝐋𝐢𝐠𝐡𝐭𝐧𝐢𝐧𝐠 𝐭𝐨 𝐔𝐒𝐁-𝐀 𝐂𝐚𝐛𝐥𝐞 】 [ Made for iPhone, iPad and iPod] Every Marchpower MFi certified iPhone charger cord keeps your iPhone safe from overheating or short-circuiting. And this black iPhone charger charges your iOS/iPadOS devices FAST! Using the original smart chip ensures that no warning message pops up, and transmits data securely at maximum speed. | 【𝐅𝐚𝐬𝐭𝐞𝐫 𝐂𝐡𝐚𝐫𝐠𝐢𝐧𝐠 & 𝐒𝐚𝐟𝐞𝐫 𝐃𝐚𝐭𝐚 𝐓𝐫𝐚𝐧𝐬𝐟𝐞𝐫】 Our Black iPhone charger uses durable premium four-core copper wires to provide maximum charging speed（2.4A）and safer high-speed data transferring（480Mbps). Marchpower usb a lightning cables charge faster than most standard cables and fit well with quick-charge devices. There is more- our great performance ensures your devices sync and charge simultaneously. Enjoy perfectly secure data transfer and fast charging. | 【 𝐒𝐮𝐩𝐞𝐫-𝐃𝐮𝐫𝐚𝐛𝐥𝐞 𝐂𝐡𝐚𝐫𝐠𝐞𝐫 𝐂𝐨𝐫𝐝 𝐟𝐨𝐫 𝐢𝐏𝐡𝐨𝐧𝐞/𝐢𝐏𝐨𝐝 】After many bending tests, for our Lightning to USB-A cables we chose premium, compact Aluminum Alloy Terminals to provide extra protection and durability. Our black iPhone charger cord features ultra-strength connector joints to endure up to 10,000 twists of 90 degrees bend throughout the cable’s lifetime: substantially stronger than the original iPhone charger. | 【 𝐖𝐢𝐝𝐞 𝐂𝐨𝐦𝐩𝐚𝐭𝐢𝐛𝐢𝐥𝐢𝐭𝐲 】Our Black iPhone charger ensures 100% compatibility with all IOS devices, such as the iPhone 14/iPhone 14 Plus/iPhone 14 Pro/iPhone 14 Pro Max/iPhone 13/iPhone 13 mini/iPhone 13 Pro/iPhone 13 Pro Max/iPhone 12 mini/ 12/ 12 Pro/ 12 Pro Max/ iPhone 11 / iPhone 11 Pro / iPhone 11 Pro Max / iPhone XS / XS Max / XR / X / 8 / 8 Plus / 7 / 7 Plus / iPhone 6S / 6S Plus / 6 / 6 Plus / SE / 5S / 5C / 5 / iPad Air / iPad / iPad Pro / iPod / AirPods / AirPods Pro and more. | 【 𝐖𝐡𝐚𝐭 𝐘𝐨𝐮 𝐆𝐞𝐭 】 3-pack 3-foot black iPhone charger (better than original!) for every occasion. Now you can conveniently charge your device in your bedroom, by your sofa, at your office, during travel, and in your car. We provide great technical support to resolve any questions. We always work hard for your satisfaction.

1GBase-CU, SFP to SFP Connector, Passive, 0.3m (0.98ft), 30AWG, 1 Pack. | Compatible with Cisco, Meraki, Ubiquiti, Mikrotik, Fortinet, Netgear, D-Link, Supermicro, TP-Link, Quanta, Solarflare, PaloAlto, F5, etc. | All products are passed by TDR & VNA tests in our Signal Integrity Lab. | Widely used in data centers, storage area networks, Network Attached Storage, high performance computing, etc. | 30 days free-returned, exclusive FREE 3-year warranty and free lifetime technical support.

Compatible with - This Case Only fit Amazon 6.8" Kindle Paperwhite (11th Generation-2021 and 13th Generation-2023) and Kindle Paperwhite Signature Edition | Thin design - Durable and lightweight, it easy to install and remove without scratching | Precise cutout - All buttons and interface user-friendly design to avoid frequent disassembly. case perfect cutouts for speakers, camera and charging hole allow you to easy access to all features | Flexible - This case made of high quality soft TPU, Two colors available, dark night green, light green | Product service - If the item you have received is defective, Please email us for replacement or refund, We will reply you within 24 hours, and giving you a satisfactory answer

Supports UXGA (1600x1200), WXGA (1680x1050), 1080p (1920x1080) and up. | Grip treads for easy plugging and unplugging, and finger-tightened screws for a secure connection. | Supports Connects PC or laptop to the projector, LCD monitor, and other video display system through VGA connections. | VGA cables are ideally suited for high resolution VGA applications, designed to provide the highest video quality possible through VGA. | Shielded Cable can minimize crosstalk, suppress noise and protect against electromagnetic interference (EMI) and radio frequency interference (RFI).

Replacement Lightweight Mic Compatibility:The replacement microphone only compatible with Corsair HS35 HS45 Gaming Headsets. | Natural&Crystal Clear Sound Quality:Omnidirectional replacement mic with good stability, ultra low noise, improves audio quality and captures clear sound.Create more professional quality voice overs for your video tutorials. | Plug and Play：No driver needed, 3.5mm male plug microphone. Gold-plated tip, anti-oxidation, better interface and less impedance. Just plug the microphone's 3.5mm port into a suitable device such as a headphones,desktop computer, laptop, etc. | High Quality Boom Arm Material:The Replacement microphone boom wear-resistant, long service life and anti-interference materials.Soft silicone covers can easily bend freely to your suitable position. | Noise Reduction Backup Microphone:The features a sensitive adjustable Replcement microphone with upgraded noise-canceling technology. It filters out most of the ambient noise around you, allowing you to talk in real-time with no lag. Lets you chat with other gamers in crystal clear audio.

Protect your laptop's battery: Certified and listed by UL, the national gold standard for electronic safety in the US, this replacement charger meets the highest industry standards for safety and quality. It protects your device from overheating, overcurrent, and other risks. Use it with confidence! | Superb Compatibility: Fit for ALL Lenovo laptops with round power connector and power of 65W and 45W, series incl. IdeaPad, Yoga, Flex, Chromebook and more. | Superb Compatibility: Fit for Compatible with Lenovo Laptop Charger, Ideapad 3 330 320 310 330S S340 S145. | Guarantee - Within 30 days of purchase, we offer a no-questions-asked replacement guarantee and a 180-Day-Quality-Guarantee by the Manufacturer. | Power Specifics: Output Max - 65W, 20V-3.25A, Works perfectly with 45W Lenovo laptop; Input Range: 100-240V, 50-60Hz | Package Includes: 1 X Charger for Lenovo Laptop.

1.🎄Ugrade Version: single piece moulding，more stable and stronger。1/4-20 and 3/8 screw holes，more choice 。All screws are done inside.*******NOTE*****:Only can mount on Arca Swiss Quick Release Plate directly,if you want install to Camvate, base plate,please screw on the plate. | 2.🎄If you use this Camera L bracket on ronin S/SC or gimbal stabilizer, it can not replace stabilizer's quick release plate, but you can mount it to the quick release plate, please refer to our major picture (the Second one) for instructions. | 3.🎄Innovative photographer partner : This L bracket is designed to shoot both vertically and horizontally ,especially it is a must for vertical shooting. You can switch freely between “landscape' and 'portrait' without a ball joint. | 4.🎄Universal Application: This quick release L plate is fit for almost cameras, such as DSLR EOS 80D T6 5D mark i 6D D800 T6i 1300D D750 D850 D3400 D5600 D7200 ,micro-DSLR a7riii a7rii A7S a6000 a6300 . Also, it is a great help on gimbal stabilizer. | 5.🎄Solid structure: It is made of aviation aluminum and processed with highly-precise CNC technique, which features light weight, high strength and good durability, so it is absolutely cost-effective. | 6.🎄Well Designed and Practical: This bracket can be mounted on tripod head or a quick release clamp directly through screw holes , leaving space for USB cable , a couple of limit screws at the bottom to prevent camera from sliding out. | 7.🎄Extended Multiple 1/4'' and 3/8 Screw holes： With several screw holes ,you can mount microphone, pocket light, field monitor and more photographic accessories easily, perfect for outdoor shooting Instagram IGTV live streaming or any video shootings.

Suitable for Raspberry Pi 4, Pi 3 boards. | Includes 4pc 30mm quite fan and 12pc aluminum + 4pc RAM copper heatsink. | Heatsinks are 3M 8810 thermal conductive adhesive tape backing. | Fans are with One-to-Two wire connector Interface for dual speed mode (3.3V and 5V DC) Low noise (15.92dBA), Long life (30,000 hours). | Raspberry pi not included.

U Compatible for Canon EF-S 18-200mm f/3.5-5.6 is Lens. | U Compatible for Canon EF 28-200mm f/3.5-5.6 USM Lens. | U Compatible for Canon EF 28-200mm f/3.5-5.6 Lens. | U Made of high-quality plastic ABS material，Colour: Black.

Screen opener pry tool is mainly used for repairing computers, laptops, desktops, mobile phones, etc. It is an important accessory of repair tools, which can pry open the screen without damaging the screen. | Phone pry opening tools, is in size of : 11mm/0.43-inch pry width, 120mm/4.72-inch total length | Small size, light weight, easy to carry; Easy to use and practical; Good hardness; Reusable | Steps of installation: 1. Select phone pry opening tools with moderate thickness; 2. Pry open and separate the screen | Please pay attention to selecting the phone pry opening tools with appropriate size, especially the thickness of the phone pry opening tools

【Ricoh Compatible】Compatible with Ricoh GR III, GR III HDF, GR IIIX, GR IIIX HDF cameras, designed according to the curvature of the finger, to ensure convenience and safety at the same time a certain degree of comfort | 【High quality aluminum alloy】Made of high quality aluminum alloy, the installation and the camera perfectly fit, looks like the camera itself is equipped with parts, there will be no abrupt feeling | 【Protect the hot shoe groove】 Blocks the dust into the hot shoe groove to prevent the rust and damage caused by dust and rain | 【Provide perfect fulcrum】The perfect finger handle adds an extra fulcrum for you to grasp better, and you don't have to worry about the bad grip caused by the smooth design of the fuselage, our products will solve this concern for you | 【Quality Service】We are committed to providing you with the highest quality party supplies. We have absolute confidence in our products and we believe we can satisfy you. If you have any questions, you can contact us and we will solve it for you

Made of Aluminium | Female thread: 67mm | Female to Female | Wight:6g | Brand New

Help your M.2 NVME SSD connect your computer or laptop with this USB adapter Card | The adapter Only support for M.2 NVME M-Key & M+B SSD (PCI-E NVME-based), doesn't support B-Key SSD(SATA-based) and M-Key M.2 SSD(PCIe AHCI-based) | 10Gbps fast speed transfer with USB 3.1 Gen 2 bridge chip, much more faster than USB 3.0 or USB 2.0 | Hot swap, plug and play, no driver need. Straight connection without a USB cable | Compatible with Support Samsung 950Pro/ 960Evo/ PM951/ PM961/ SM951/ SM961/970 EVO /970 PRO and other M.2 SSDs with PCI-E (M-KEY) Interface Type,which size is 2230 / 2242 / 2260 / 2280

Wide Compatibility: This 4 in 1 Pack includes 1pcs type A male to male adapter, 1pcs type A female to female adapter, 1pcs type c to usb male adapter and 1pcs type c to usb female adapter.
USB A to USB A adapter connects a USB peripheral with USB 3.0 type A port to a computer for speedy file transfer.
| 5Gbps High-speed Transfer: With data transfer rate up to 5Gbps, this 4 in 1 pack is 10x faster than USB 2.0 (480 Mbps), backs up your huge files in seconds and ensures fast charging&data syncing. It is also backward compatible with USB 2.0, 1.1, 1.0 standard devices.
| Premium Aluminum Alloy: Housings are designed to dissipate heat generated during charging and data transferring, which is safer compared to other plastic adapters. The abrasion resistant nylon braided cable is rugged enough for your everyday use and can stand strong tension forces. 4. Plug and Play. Compact, convenient and easy to install and compatible with mostly cases.
| What You Receive: 1x USB to USB Male Adapter; 1x USB to USB Female Adapter; 1x USB 3.0 to USB C Male Adapater; 1x USB 3.0 to USB C Female Adapater (4 in 1 Pack) | Plug and Play. Compact, convenient and easy to install and compatible with mostly cases.

Broad Compatibility: "One-Stop Breadboard Power Solution" - BreadVolt Compatible with Arduino, Raspberry Pi, ESP32, Pico W, etc. BreadVolt offers 5V/1.5A and 3.3V/1A power outputs, suitable for a variety of electronic projects | Portable Power: "Power Anytime, Anywhere" Allowing you to continue experimenting, creating, and showcasing projects even in environments without power outlets | High Stability and Reliability: "Precisely Stable Power Output" - Provides 5V and 3.3V outputs adjustable via jumper caps, ensuring stable operation of your electronic projects | Ease of Use: "Beginner-Friendly Interface" - Simple to operate with an on/off switch. Compact size of only 52mm x 32mm x 24mm, easy to install and use, ideal for education and self-learning | Multifunctionality and Expandability: "Versatile Functions, Wide Applications" - Includes two independent channels and a USB output, suitable for IoT, robotics, and a diverse range of projects

★SOFT SILICONE MATERIALS - Made of tenacious and soft silicone material, washable, extremely durable, lightweight and add no bulks to your camera. | ★EXCELLENT PROTECTION - Soft silicone case protects your camera from bumps, dust, slip, scratches, scraping, daily wear and tear. | ★PRECISE CUTOUTS - Precise cutouts make it easy access to all featured buttons, Battery Door, HDMI data port, Memory Card, shutter release, Strap Hook, Lens etc. What's more, allows you get access to bottom 1/4" tripod hole for tripod or L bracket. | ★COMPATIBILITY - Snugly fits Sony DSC-RX100 III RX100 V RX100 IV RX100 VII DSLR Camera. Not for Other Digital Cameras. PLEASE NOTE: Only silicone case in the package, the Camera is excluding. | ★OTHER HIGHLIGHTS - 1. Soft and comfortable touch, easy to grip. 2. Colorful, decorative your camera, and makes your camera look cool. Trustful partner for your lovely camera. 3. Easy to install and remove.

▶ 3 Pack Highwild Trail Camera Holder.(CAMERA NOT INCLUDED) | ▶ Work for trail cameras with the 1/4" x 20 thread insert on the bottom. | ▶ Ultra-sharp tip screw for easy installation. | ▶ Durable steel construction with powder coat finish. | ▶ Mount camera in various positions for optimal aim.

[Compatibility]：Only compatible with Samsung Smart Tag2 released in 2023. not compatible with other device | [All-around Protection]：Made of high quality shockproof silicone material, not easy to aging, not easy to break, upgraded thickness 360°all-round protection of your Galaxy Smart Tag 2 from dust, scratches and external shocks. | [Full Signal and Full Sound]：With exposed hole design, the case will not block the tracking signal and sound Smart Tag 2 .So taking the case with you won't affect its function. | [Safe and skin-friendly material]：Smart Tag2 case keychain is made of high-grade environmentally friendly silicone, which is comfortable to touch. No irritating odor, easy to clean, dirty just rinse with water. | [Portable and Multi-Purpose]：Ultra-thin profile, minimal volume, very portable while protecting. The Smart Tag 2 case keychain holder with a key ring so you can easily hang it on your backpack, car keys, wallet, dog collar and more. It protects your belongings while keeping the SmartTag2 secure.

Widely Compatibility: This camera wall mount is designed for eufy Solocam S220/C210, eufyCam 2C/2C Pro, 3/S330, 3C/S300, and other cameras with 1/4 threaded hole | Thicker material: Made of sturdy metal and thicker ABS plastic materials, no need to worry about the common mount is prone to rupture and instability | Better View: The stand can be fixed to any wall and is capable of rotating 360 degrees and tilting the camera 90 degrees for the best viewing angle | Longer-lasting: The aluminum alloy ball head is waterproof, rustproof and corrosion resistant, and can be used for a longer time | Easy Installation: It only takes a few minutes to drill 3 holes with wall anchors and screws to fix the mount on the wall

Console Cable: DB9 RS232 male to RJ45 female console cable connects your PC laptop to any device with an RJ45 Cisco console port for debugging. | Extra long 3m DB9 to RJ45 cable: This Cisco RS232 9-pin serial cable is up to 3m long, so you can move serial port devices around as much as you like without worrying about distance. | Flat design: The RS232 9-pin serial to RJ45 features a flat cable design that helps distinguish it from other network cables and prevents the possibility of tangles. The flat design also makes it easier to be rolled up for compact storage. | Widely compatible: The cisco console cable is a compatible replacement cable for the cisco 600, 800, 1600 and 1700 router series. The cable can connect your computer to cisco switches, firewalls, routers, wireless devices and more. | Rugged cable: The blue RJ45 to DB9 female conversion cable connection port is plated to keep it highly resistant to the heat generated by electronic equipment. It features a screw-on fixing to help create a secure connection.

【USB Splitters】:This usb extension cable can split 1 usb male to 2 about 3ft/1m long usb female port,support charging and data transfer. The USB splitter is a USB 2.0 High Speed Hub for connecting 2 USB A port devices to your desktop/laptop at the same time. | 【USB Extension Cable】:This usb y splitter can transform one of your computer’s USB ports into two with this USB hub.Offers data transfer speeds of up to 480 Mbps and also supports up to 1.5 Amps of power output. | 【Ultra-durable】: This usb power splitter made with sleek aluminum shell and nylon braided jacket to withstand daily twists and pulls.Simple plug and play requires no drivers or software. | 【Note】: It does not work for car USB/ Apple Carplay.as these systems do not support USB hubs.（Compatible with TESLA model 3,which is similar to Laptop equipment.） | 【What you will get】:Package include:1 x 6.6ft long USB extension cable.

【Newly Upgraded Privacy Screen】This advanced privacy screen macbook pro 16 inch is designed with a nano-adsorption frame, which eliminates the need for thick magnetic strips or annoying glue. With a direct installation process, it won't fall off or warp, and its thin and soft design won't interfere with the closure of the computer. This new and innovative alternative to traditional magnetic privacy screen protectors offers unparalleled protection and convenience. | 【Compatible Model】This macbook pro m3 privacy screen is custom-made for the 2023/2021 MacBook Pro 16 inch, including the M3 Pro, M3 Max, M2 Pro, M2 Max, M1 Pro, and M1 Max. Before you order, please double-check your MacBook's size and model to make sure it's a perfect fit. In addition, if you encounter any problems when receiving or using the product, please feel free to contact us via email and we will provide you with a repair, replacement or re-fund. | 【Privacy Protection】Our macbook pro privacy screen 16 inch is perfect for professionals who deal with sensitive information or use computers in public places. With a viewing angle of ±25°, making it virtually impossible for anyone to peek at your screen without your consent. The front of the screen remains crystal clear visible, providing complete privacy protection from sides. It's the ideal solution for healthcare providers, mobile workers, commuters, students, and business travelers. | 【Eye Protection】The macbook pro 16 m3 privacy screen features a layered anti-blue light design and multi-layer filtering harmful blue light. This technology reduces eye strain, headaches, and other adverse effects associated with prolonged computer use. The protector is perfect for anyone who spends long hours in front of a computer, from students to professionals. Its anti-glare properties make it an ideal choice for those working in bright environments. | 【Unlimited Reuse】The macbook pro 16 inch privacy screen m3 features an advanced nano-adhesive design that ensures a perfect fit without any bubbles or slipping, completely installed in seconds, extra edge installed on the right.. It can be removed and reused without any loss of functionality, making it a cost-effective and eco-friendly accessory. Whether you need to clean it or keep it in the accessory package, you can rest assured that it will be as good as new when you decide to use it again.

2 Pack Quality tempered glass screen protector exclusively designed for Samsung Galaxy Tab A 8" 2019 tablet (Model: SM-T290 SM-T295, No S Pen Version) ONLY | 9H hardness surface with Super HD transparency | True touch sensitivity; Ultra thin (0.33mm thickness); Rounded edge integration | Bubble-free installation, only take seconds; Advanced silicon adhesive, no residue when removing | Scratch resistant; Shock-resistant; Anti-oil

【Compatibility】This Waterproof SmartTag2 case was specially designed for Samsung Galaxy SmartTag2 2023.Protect your SmartTag2 from shocks and scratches. | 【Full Covered Silicone Design】 This Galaxy smart tag 2 holder is made of high-quality soft silicone material, providing stronger cushioning when bumped or dropped to fully protect your smart tag 2, the smarttag 2 box is fully sealed and fully covered design. The waterproof rating is IPX8, and it can be submerged under 3m for up to 30 minutes without damaging the samsung smart tag 2. | 【Wide Application】Galaxy Smart Tag 2 tag case is suitable for many scenarios of using Galaxy SmartTag 2, hang it anywhere you want to track items. You can hang it on keys, cat and dog collars, children's backpacks, suitcases, luggage, or other valuables without worrying about losing it. | 【Effective Tracking】The fully enclosed design does not affect signal transmission and humanized installation. You can easily track and find your Galaxy SmartTag2 at any time. The Galaxy SmartTag2 case does not affect Bluetooth connectivity or block tracking signals. | ★ 【Package Contents】2*Galaxy SmartTag 2 cases, 2*Key Ring, (Note: Galaxy SmartTag 2 is not included). Please feel free to buy our products as we provide free technical support and a 12-month manufacturer's quality guarantee.