Cable length: 40cm. Connector: 3.5mm to L1 type remote socket of camera | This cable allows you to connect Pixel TW283 series shutter remote control to compatible cameras, instead of buying the new set of remote controller | Compatible with Panasonic S5 S5C S5K S1H S1RM S1R S1M S1K S1 G95 G91 G91H G91M G90M G90H G90 FZ10002 G9 G9L G9M GH5 GH5L GH5S GH5M GH5M2 GH5M2L GH5M2M GH6 GH6L GH6M; G85 G81M G81H G81 G80M G80 G70H G70M G70KA G70K G70W GX8K GX8M GX8A GX8H GX8 GX7 GX1 GH4RH GH4R GH4 GH3 GH2 GH1 GF1 G10 G7H G7K G7M G7 G6H G6K G6M G6 G5 G3 G2 G1; FZ2500 FZ2000 FZ1000 FZ330 FZ300 FZ200 FZ150 FZ100 FZ50S FZ50K FZ50 FZ30K FZ30 FZ20S FZ20K FZ20; L1 L10 LC-1; Leica DigiLux 2, DigiLux 3, V-Lux 4

Ultra-slim 9.70mm design to suit most car rear view mirror. | 360 Degrees Rotating Supported, adjust to any angle you need. | Exclusive 17mm Ball Connection for ALL Garmin Nuvi GPS Navigator. | Easy install and removal, never fall down from the windshield. | LIFETIME WARRANTY -- Just Feel Free To Click the "Add to Cart" Button Order iSaddle CH369 RIGHT NOW!

Original OEM Fat Shark Part | Sold by Authorized Fatshark Dealer

Cable length: 40cm. Connector: 3.5mm to S1 type remote socket of camera | This cable allows you to connect Pixel TW283 series shutter remote control to compatible cameras, instead of buying the new set of remote controller | Compatible with Sony ILCA-77M2, 99M2, 99V; DSLR - A100, A200, A300, A350, A400, A450, A500, A550, A560, A580, A700, A850, A900; SLT-A33, A35, A37, A55, A57, A65, A67, A77, A99, Konica Minolta DIMAGE A2, A1, DIMAGE 9, DIMAGE 7Hi, 7i, DIMAGE 7, DIMAGE 5, DIMAGE 4, DIMAGE 3, DYNAX 7D, 5D

Cable length: 40cm. Connector: 3.5mm to E3 type remote socket of camera | This cable allows you to connect Pixel TW283 series shutter remote control to compatible cameras, instead of buying the new set of remote controller | Compatible with Canon EOS R6, EOS R, EOS RA, EOS RP, 850D, 90D, 80D, 70D, 77D, 60D, 60Da, 250D, 200D, 200DII, 100D, 800D, 760D, 750D, 700D, 650D, 600D, 550D, 500D, 450D, 400D, 1500D, 1300D, 1200D, 1100D, 1000D, 2000D, M5, M6, M6 Mark II; PowerShot SX50HS, SX60HS, SX70HS, G1X Mark III, G1X Mark II, G1X, G3X, G5X, G10, G11, G12, G15, G16; Rebel: XT, XTi, XS, XSi, T1i, T2, T2i, T3, T3i, T4, T4i, T5, T5i, T6, T6i, T7i, T8i, SL1 etc. Replaces Canon RS-60E3 | Compatible with Fujifilm GFX100, GFX100S, GFX100IR, GFX50S, GFX50SII, GFX50R, X-H1, X-Pro3, X-Pro2, X-T4, X-T3, X-T2, X-T1, X-T30, X-T30II, X-T20, X-T10, X-T100, X-E3, X-E2S, X-E2, X-E1, X-A7, X-A5, X-A10, X100V, X100F, X100T, X70, X30, XF10; Compatible with Pentax 645Z, K-1 Mark II, K100D, K110D, K200D, K-500, K100D, K20D, K10D, K-30, K-50, K-7, K-5, K-5II, K-5IIs, K-3, K-3II, K-1; *ist D, *ist DL, *ist DS, *ist DS2. Replaces Fujifilm RR-100 | Compatible with Olympus OM-1, E-M1X, E-M1 Mark II, E‑M1 Mark III, E-M5 Mark III ; Compatible with Samsung GX-1L, GX-1S, GX-10, GX-20, NX100, NX11, NX10, NX5; Contax 645, N1, NX, N Digial; Sigma Sd1. Replaces Olympus RM-CB2

Universal duty belt radio pouch holder/ holster for police, security, firefighters, E.M.S. | Full nylon webbing exterior shell for a strong versatile finish. | Outer shell is fade and scratch resistant. High-density foam core center 4-part laminate provides extra durability. | Will comfortably hold standard size police radio/ walkie-talkies.

PLEASE NOTE ! Only for units WITH AUX function activated. | DIRECT ANALOG CONNECTION - Superior sound quality cable plugs into the aux port directly on the back of the head unit, there is no loss of sound quality. | AUDIO SIGNAL INTERFACE - All other controls must be made on the audio device itself. (I.e. change song on the device itself) | SUPPORTS ALL 3.5MM AUDIO DEVICES - iPod, MP3 MP4 FLAC Media Players, HTC ONE/ MAX/ MINI, Huawei P10, Samsung Galaxy A3/ A5/ A7/ J1/ J2/ J3/ J5/ S /S6/ S7, Sony Xperia X/ XZ/ XZs, Nokia 3 / 5 / 8 | COMPATIBLE WITH - Car adapter works with RCD210 RCD310 RCD510 RNS310 RNS510 car audio systems. DOES NOT WORK with RCD200 , RSD300, RNS300

Compatible for Canon cameras include EOS 1D X MarkII, 1D X, 1DS Mark III, 1DS Mark II, 1Ds, 1D Mark IV, 1D Mark III, 1D Mark II N, 1D Mark II, 1D, EOS D2000, 5D Mark II, 5D Mark III, 5D Mark IV, 5DS, 5DS R, 5D, 6D, 7D, 50D, 40D, 30D, 20D, D60, D30, EOS-1V, EOS-3 | This cable allows you to connect Pixel TW-283 Shutter Remote Control to compatible cameras, instead of buying a complete new remote/receiver | Cable length: 40cm

【Size&Color】:7x5ft/(84in x 60in), Pictorial cloth is bright in color.High-resolution digital print.No reflective or faded. | 【Material】:Economical Polyester, this fabric is durable and soft, Seamless, High-resolution digital print, not easy to wrinkle.It can be folded and easy to carry.Can be Ironed and Washed with bleach-free water. | 【Features】:Custom Service:We can customize the pattern and size you want.For your satisfaction, please contact us before payment, send the custom information by Amazon Message(Size, Words, Color or any parts to change). | 【Warm tips】: 1.You will receive just one backdrop, stand is not included;Item will be sent by folded.2.Easy to install:Use Clamp, Nails or Tape on the wall.3.You can reduce wrinkles by hanging the backdrop in advance or ironing the back side (not the image side) at a low temperature.To avoid possible steam damage, place a layer of dry cloth between the backdrop and the iron. | 【Wide Application】:This Photography backdrop is suitable as party supplies, like birthday party, baby shower, wedding, holiday, graduation, baptism,retirement and so on.Or you can use it as home decoration, such as wallpaper, curtain, tapestry, tablecloth,etc.

【40mm Mini Design】Product size is 40 * 40 * 25mm (exclude metal frame). With a design of mini and lightweight, this usb fan can be used in narrow places such as computer hosts, routers, etc. It can also be placed in a small gap on a desk or computer to cool down electronic products. Note: the 40mm fan is small and the speed will increase to achieve the heat dissipation effect, so some noise will be generated during use. | 【2 in 1 USB Fan】Compared to a single fan, the latest upgraded 2 in 1 dual usb fans can cool electronic products from different angles at the same time, which is more efficient. With a large air volume design and an external hard disk box, it can also cool electronic devices such as smart phones, game consoles and personal computers in a few seconds. | 【USB Power Supply, Plug and Play】USB power cable is plug and play. With a speed adjustment switch, there are 3 wind speeds for you to choose, the speeds are respectively L:4000 / M:4800 / H:5500rpm +/- 10% (×2), noise: L:23 / M:25.2 / H:27.3dB. The noise and air volume can be adjusted according to the use environment. Two fans can be connected to one USB cable and run at the same time to improve efficiency. | 【Double Ball Bearing Design & Long Service Life】Adopt high-quality double ball bearing motor, the service life is twice that of ordinary fans, and it can work continuously for a long time. Equipped with a metal frame and finger safety protection to prevent accidental injury during operation. | 【Wide Application】This usb pc fan is not only suitable for cooling equipment such as personal computers, routers and HDDs, but also suitable for AV equipment and game consoles. Simply connect to a device equipped with a USB terminal than can start cooling easily without cumbersome wiring.

❤ Mini Cooling Fan: ELUTENG 40mm mini USB cooling fan with 3-speed control, size and super lightweight design, perfect fit for DIY cooling and narrow place. | ❤ 3 Speed Control: Voltage: 3.5/4.2/5V; Air volume: 3.5/3.88/4.4 CFM, different speed level for different cooling needs.***NOTE: Input power: Max 5V/1A. excess may damage the motor | ❤ Widely Used: Suitable for ventilation of VR glasses /TV box /Raspberry pie /Router /Small PC Case and other small electronic equipment ventilation. | ❤ High Quality: Metal grill on front side, protect cable and your hands; High quality bearings, durable; 100cm/3.3ft USB cable , meet connection needs.Please confirm the size by pics before purchasing. | ❤ USB Powered: 5V powered, allow you to use it in any places with USB power supply, convenient,perfect for Home/Office/Business trip.

[Unique Design] -Preciously designed for New iPad Mini6 8.3 inch 6th Generation 2021 Release. Note: It will not be compatible with other iPad Models, please check the back bottom of your iPad to find the model number. | [Durable Material] - Made of High Quality TPU Material, slim and lightweight design with excellent craftsmanship and feel. Prevents the tablet from scratching and bumping | [Built-in Pencil Holder and Side Charging] - Compatible with the Apple Pencil(2nd Gen) magnetic attachment and wireless charging on the side (Apple Pencil is Not included) | [Auto Sleep/Wake Feature] - Magnetic smart cover supports auto wake/sleep function.Powerful magnet secures the case closure, easy to snap on and off. | [100% Fit] - Precise cutout and design allow easy access to all ports, sensors, speakers, cameras.

JustGreatDealz Battery BT184342 / BT28433 / BT284342 / BT18433 / BATT-6010 / 8300 / 89-1326-00-00 / CPH-515D Compatible with Vtech Telephones (2-Pack) | Voltage: 2.4V -- Capacity: 550mah -- Composition: NiMH | Compatible Replacement for Vtech Batteries: 8300, BATT-6010, BT18433, BT184342, BT28433, BT284342, 89-1326-00-00, CPH-515D | Compatible Replacement Battery for Vtech Telephones: 3101, 3211, 6010, 6030, 6031, 6032, 6041, 6042, 6043, 6044, 6051, 6052, 6053, 6113, 6122, 6151, 6211, 6221, 6222, 6226, 6228, 6311, 6321, 6322, CS6209, CS6219, CS6219-2, CS6219-3, CS6219-4, CS6229-2, CS6229-4, DS6101 | DS6111, DS6121, DS6121-3, DS6121-4, DS6121-5, DS6151, DS6201, DS6211, DS6211-2, DS6221, DS6221-3, DS6301, DS6321-3, EMBARQ eGo, IP8300, IP8301, IP831, IS6110, LS6204, LS6245, TM3111, TM3111-2

Compatible with All New Fire HD 7 8 10, Fire HD 8/8 Plus Fire HD 10/10 Plus, Fire 7 HD 8 HD 10 Kids Edition, Kindle Oasis, Paperwhite, Voyage, Kindle E-reader | 1 x Charger Block + 1 x USB-C Charging Data Cord(3.3 Feet) + 1 x Micro USB Convertor Adapter | High Quality easily Charging and Data Transferring Sync Cable | Perfect Length: The usb cable with perfect length 3.3ft, neither too long nor too short for your devices everywhere and daily life | MONEY BACK GUARANTEE - Our Company Wants your Repeat Business so, if You Do Not Like our Product or Don't Want It For Any Reason, We Will Happily Accept The Return and Give You Your Money Back. No Questions Asked. 30 Days Money Back Guarantee - 24 Months - Exchange

Fire 7 Chargers for Fire 7 Tablet, Fire 7 Kids Tablet, Fire 7 Kids Pro 7", Compatible with Samsung S7 S8 | 2 x USB Chargers + 2 x USB-C Converters + 2 x Micro USB Charger Cords(3 Feet) | Comes with USB Type C Converters for New Generation Tablets, Universal for ALL Version Fire Tablets Kindle. | Charging and Data Transferring Sync Cables. High Quality for Long Term Uses. | Money Back Warranty.

2 x USB Charger + 2 x Cord(3.3 Feet) | Power Adapter Charger and detachable charging Cord Replacement for Amazon Fire TV Stick | Cord length: 3.3ft | MONEY BACK GUARANTEE - Our Company Wants your Repeat Business so, if You Do Not Like our Product or Don't Want It For Any Reason, We Will Happily Accept The Return and Give You Your Money Back. No Questions Asked. 30 Days Money Back Guarantee - 24 Months - Exchange

【2 in 1 Bluetooth AUX Adapter】Wireless transmission mode(TX) Convert wired audio into wireless signal, Transmission to wireless device output. Wireless earphone(RX) Receive wireless signal Transfer to wired audio via wireless connection. | 【Bluetooth 5.0 Stable Connection】This car Bluetooth adapter uses the latest Bluetooth 5.0 technology, which can achieve 33 feet (10 meters) long-distance transmission and stable connection, allowing you to enjoy your favorite music while driving! | 【Simple operation】This bluetooth car adapter with an ON/OFF switch, when you turn on the switch, it will automatically enter the pairing mode, and the pairing is successful quickly, which is convenient for you to use. | 【Hands-free Call】This bluetooth receiver with a built-in microphone, press the power button to answer or hang up; pause or play music, no longer need to operate your phone, free your hands, and drive safely. while you are on the move. Make sure you drive safely! | 【Ultra-Portable】With a compact size, you can carry this bluetooth auxiliary adapter for car, and it does not take up place in your pocket and no space in the car. | 💝【HEARTWARMING REMINDER】 If there are any problems with the use or function of the product, or if the product is defective/damaged, please contact the seller first, we will do our best to solve the problem for you.

Anti-glare (matte) film engineered to reduce glare and fingerprints | Made from the high quality Japanese PET film for easy installation and no residue when removed | Real touch sensitivity for a natural feel that provides flawless touch screen accuracy | Protects your screen from daily scratches, dust and scrapes | Include 6 pcs screen protectors

Replacement pencil tips compatible with apple pencil 1st /2nd Generation. | Design for HATOKU iPad Pencil 1st Gen (White). | Made in China | What's in the Box: Six extra tips for Apple Pen.

This Adapter Ring without electronic contacts, which don't support auto-focus or aperture control. Require manual operation. Solid Metal construction, Completely manual control, manual focus and manual exposure. | Can be used on JINTU / Opteka of 500mm, 420-800mm, 900mm, 650-1300mm telephoto lenses etc. | T2-EOS adapter for Canon EF/EOS Mount, Compatible with Canon EOS Rebel T1i, T2i, T3, T3i, T4, T4i T5, T5i, T6, T6i, T6s, XS, XSI T7, T7i, T7s 1D, 5D, 5D II, 5D III, 5D IV 6D, 6D II, 7D, 7D II, 30D, 40D, 50D, 60D, 70D, 80D, 90D, 4000D, 1200D , 1300D, 200D, 250D Digital SLR Cameras. | T2-AI for Nikon F Mount, Compatible with Nikon D5000, D5100, D5200, D5300, D5500, D5600, D7000, D7100, D7200, D7500, D70, D80, D3000, D3100,D3200, D3300, D3400, D90,D100, D200,D300, D300S D500, D600, D610, D700, D750 D800, D810A, D810, D850 Digital SLR Cameras | T2 M4/3 adapter fit for Olympus/Panasonic Micro 4/3 Mount ,Compatible with Micro 4/3 Mount Camera: Panasonic Lumix DMC-GH5, DMC-GH4, DMC-GM1, DMC-GX7,DMC-G6, DMC-GF6, DMC-GH3, DMC-G5, DMC-GF5, DMC-GX1, DMC-GF3, DMC-G3, DMC-GF2, DMC-GH2, DMC-G2, DMC-G10; Olympus: OM-D E-M10, OM-D E-M1, PEN E-P5, PEN E-PL5, PEN E-PM2, OM-D E-M5, PEN E-P3, PEN E-PL3, PEN E-PM1, PEN E-PL2, PEN E-PL1s, PEN E-PL3, PEN E-PM1, PEN E-PL2, PEN E-PL1s, PEN E-PL1, PEN E-P2

This mount adapter is compatible with Nikon DSLR cameras to attach T2/T mount lens. | It allows you to attach your nikon DSLR /SLR camera to lenses, telescopes, microscopes, enlargers, and bellows attachments that have a T2 universal thread mount. | Completely manual control, manual focus and manual exposure. There is no electrical connection on the ring so diaphragm control of the lens is set manually. | With a mini Wrench to help tighten or loosen the screw. | Made of high-quality metal material, durable for long time use.

This SO239 coupler can connect two coaxial cables together, which are commonly used on CB ham radio, antenna, SWR meter. | High quality, made with brass, nickle planted for higher signal transmission and extremely low signal loss. | Come with 5-Pack, which can save you much and makes you always have a backup. | We offer worry-free warranty and friendly customer service within 12 months for your confident purchase. If you are not satisfied with any product, please don’t hesitate to contact us, we will serve you our best.

【 Compatibility List】: Aiminu USB-C to iPhone cable supports PD Fast Charge 3A (max) for iPhone 14/14 Pro/14 Pro Max/14 Plus/ iPhone 13/13 Pro/13 Pro Max/13mini/iPhone 12/12 Mini/12 Pro/12 Pro Max/11/11 Pro/11 Pro Max/XS Max/XS/XR/X/8 Plus/8 and iPad 8th iPad 2020, iPad Pro 12.9" gen1/ gen2/iPad Pro 10.5"/iPad Air3 10.5"/iPad mini5 7.9"; This cable also supports the standard charge for iPhone 7 Plus/7/6 Plus/6/6S Plus/6S etc. Note: You need a USB-C port wall charger to achieve fast charging. | 【Power Delivery Fast Charging】The usb to iphone charger cord supports a rapid charge up to 3A (max). It also support data transfer rates up to 480Mbps. Note: You need a USB-C port wall charger to match it. (including 18W, 20W, 30W, 60W, or 87W USB-C Power Adapter). | 【Nylon Tangle-free Design】Aiminu's USB C iPhone Charging Cord includes built-in overvoltage protection and is tested for up 10,000 bends, making it more durable. Heat-resistant connector and premium nylon braided ensure complete safety and reliability. | 【MFi Certified Lightning Cable 3ft 2Pack】 MFi certified iPhone fast charging cable uses the newest C94 Lightning connector, which support quick charger for lightning device, C94 USB C to Lightning cord more stable, safe, faster than nomal iphone cable | 【What You Get】Aiminu 2-Pack USB-C to Lightning Cable (3ft), worry-free 18-month warranty and friendly customer service. If you have any questions about our 3ft type C to lightning cable, pls send us message or raise a QA, our service team will provide you with a satisfactory solution within 24 hours.

1.【Compability】This silicone sleeve designed for Samsung Galaxy Tab S7/S7+/S7 FE/S8/S8+/S8 Ultra S pen, Not for other Samsung Galaxy Tab S Pen. | 2.【Unique Appearance Design】The separate combination design of pen case, the design is derived from the classic pencil may bring you new inspiration to personalize the look of your pen. Unique creativity and beautiful appearance, giving you the most classic writing experience. | 3.【Premuim Material】Made from premium silicone to increase grip, perfectly protect your pen from scratches, shocks, impacts, dust, and accidental damage. | 4.【Easy Charge】The ultra thin sleeve allows you direct charging just magnetically attaches to your tab without take off the pencil case. | 5.【Installation】Easy to install and use. Easy to install the Pencil into the sleeve by slowly pushing the pencil and then close the cap.

【Specially Design for Air Tag】Designed for Apple AirTag 2021, after many debugging, it is completely suitable for AirTag, which is not easy to fall and easy to install. The soft skin material is very comfortable to wear and has 360-degree protection to prevent scratches (Note: AirTag is not included) | 【Carefully Selected Material】This protective bracelet is made of high-elastic nylon, which is not easy to deform and tear, easy to clean, and dry quickly. The protective case is made of TPU, which is hard and elastic, and perfectly wraps your tracker to prevent scratches. This wristband Can effectively prevent your AirTag from falling and losing. | 【Adjustability&Applicability】The nylon strap contains adjustable Velcro, which is durable and can be permanently sticky. It can be adjusted at will and fits the wrist better. It can be used by adults and children. Simple and convenient to prevent the elderly and children from getting lost. | 【Not Blocking Signal】Does not affect the signal transmission and positioning functions, the protective watchband not only protects your AirTag from drop damage but can also extend its service life, let your AirTag more portable | 【Colorful Gifts】We have a variety of fashionable colors and styles for you to choose from to match the AirTag, making your AirTag more portable and more recognizable. You can also give this protective wristband as a small gift to your children. A little surprise will definitely narrow the distance between you.

【Specially Design for Air Tag】Designed for Apple AirTag 2021, after many debugging, it is completely suitable for AirTag, which is not easy to fall and easy to install. The soft skin material is very comfortable to wear and has 360-degree protection to prevent scratches (Note: AirTag is not included) | 【Carefully Selected Material】This protective bracelet is made of high-elastic nylon, which is not easy to deform and tear, easy to clean, and dry quickly. The protective case is made of TPU, which is hard and elastic, and perfectly wraps your tracker to prevent scratches. This wristband Can effectively prevent your AirTag from falling and losing. | 【Adjustability&Applicability】The nylon strap contains adjustable Velcro, which is durable and can be permanently sticky. It can be adjusted at will and fits the wrist better. It can be used by adults and children. Simple and convenient to prevent the elderly and children from getting lost. | 【Not Blocking Signal】Does not affect the signal transmission and positioning functions, the protective watchband not only protects your AirTag from drop damage but can also extend its service life, let your AirTag more portable | 【Colorful Gifts】We have a variety of fashionable colors and styles for you to choose from to match the AirTag, making your AirTag more portable and more recognizable. You can also give this protective wristband as a small gift to your children. A little surprise will definitely narrow the distance between you.

【4 in 1 Double Card Slot】: The lightning connector support all iPhone with iOS 12.0 and up and iPads with iOS 12.0, The type-C connector support OTG Android phone/Computer and other devices with Type-C/ USB-c port, Such as for MacBook Pro, iMac, Mac Mini after 2018, iPad Pro 2022/2021/2020, iPad Air 2020/2022, Surface Book, Surface Go,Moto , OnePlus, Samsung Galaxy, DJI and more USB-C devices. | 【High Speed Data Transmission】: The Apple MFi certified chip ensures the safe transmission of your device and data, The sd card reader for iphone data transmission speed can reach 20MB/S~30MB/S,the memory sd card reader for iphone can transmit photos and videos of your camera to your device in a few seconds, saving a lot of time, but also can ensure transfer safety. | 【Safe Raw files】: Fast transfer speed,ensures high-speed syncing for raw photos, 4k videos,and more. The iPhone SD Card Adapter is compatible with SD, SDHC, SDXC, MicroSD, MicroSDXC and MicroSDHC memory cards. The SD Card Reader supports standard photo formats including JPEG,RAW,and 4K video formats including H.264 and MPEG-4. | 【Easy to Use, Plug and Play】No APP Needed, The adapter does not require an application, Portable and easily Transfer the photos and videos to your USB C or iOS device from SD / TF Card. Made out of upgraded fireproof material that protects your devices. The shell surface with superior wear and impact resistance. Lightweight and compact size for you to carry around. | 【Warm Notice 】 1.Please make sure your USB C smartphone supports OTG function; 2. Please make sure your iPhone is upgraded to iOS12 or above; 3. All the smartphones support FAT32 format. Please feel free to contact us if you have any questions. We provide 24 hours after-sale service for our customers.

【 Wide Compatibility 】 USB C Charger Charging Cable Compatible with Garmin Fenix 7 7S 7X, Fenix 6 6S 6X, Fenix 5 5S 5X Plus, Vivosmart 5, Forerunner 45 45S 55 245 255 745 935 945 955, Approach G12 S10 S12 S40 S42 S60 X10, Vivoactive 3 Music 4 4S,Vivomove 3 3S Style Luxe Sport, Vivosport, Venu 2 plus 2S Sq Music Edition, Instinct Tactical Esports Edition, Instinct Tactical Impact Edition, Instinct Solar Camo Edition, Quatix 5 Sapphire, Quatix 6 Titanium, D2 Air, D2 Charlie, D2 Delta, D2 Delta PX, D2 Delta S, Captain Marvel, Impact Bat Swing Sensor, BarkLimiter 2 | 【 Durable and Premium 】 Made of high-quality TPE material and copper wire, it is resistant to high temperatures and has good elasticity, ensuring the quality of the Garmin watch charger charging cable | 【 Safe Charging 】 With multiple protections for over-voltage, over-current, short-circuit, and temperature, it provides a safe charging environment and gives you a pleasant charging experience | 【 Compact and Portable 】 Its design is lightweight and compact, making it convenient for you to carry around | 【 What You Get 】 2 Pack USB C Garmin watch charger cables. If you have any questions, please feel free to contact us

[3.5mm Listen Only Surveillance Earpiece] Standard 1pin 3.5mm plug audio jacks; with electroplating anti-oxidation design to avoid the poor contact situation | Soft Ear Hook design; Comfortable wearing for long time; Fit either the left or right ear | Clear sound quality; Durable PU material, long service life | With short cord so it won't be wrapped around inside your shirt; good resilience, long enough for your daily work | Fits two-way radios (audio only), radio speaker mics, remote mics, MP3 players, and other audio accessories with 3.5mm earphone jack | Works great for security, police, law enforcement or any other hearing needs in noisy enviroments | We are committed to ensuring the quality of every earpieces, Provide fast customer service | Note:Please confirm the Audio Jacks type your device need(3.5mm)

[Frequency range: 26-29MHz] The central frequency point is 27.5mhz, The antenna has the best performance in 27.5mhz under normal circumstances. | [9.45inch cb Rubber duck Antenna] Rubber material, free to bend, not easily deformation for use with Portable Handheld cb Band Radios. | Connector: BNC (If you need TNC antenna,please check B0BFQ9XLBM); Maximum Power Input-watts:10W (Ham cb radio less than 10W); Gain:1.5dBi; Impedance: 50ohm | 27Mhz Antenna working for Cobra, Midland, Uniden Hand Held cb radios . | [Compatible with]Cobra HH50WXST HH50 C75WXST HHRT50; for Midland 75-822 75-785 MHS75; for Uniden BC75XLT PRO401HH PRO501TK BC125AT PRO501HH.

Compatibility: The Silicone Skin is ONLY compatible with Apple Pencil 2nd Generation and makes the pencil easy to hold. | Full Protection: The silicone skin is made of premium material, soft and durable. Anti-scratches, shockproof, dustproof and washable. | Ultra thin Design: The double-tap feature works with the case on as it would normally so you can easily switch between writing and erasing. You can also magnetically attatch to your iPad to charge. | Easy to install and remove: You can easily take on the Apple pencil case by just slide your pencil 2nd into it slowly. | Bright Colors: Variety colors and styles silicone sleeves for your Apple pencil 2.The Apple pencil 2nd Gen is not included.

Ideal for DIY Home Car Stereo | Dimension: Exterior diameter: 75mm / ~ 3”; Cut Out diameter: 48mm / ~ 1-7/8”;Wall screw hole distance: 43mm | Rear side requires Spade Connectors, Mini Spade Connectors or direct soldering of a speaker wire | NOTE: Rear connections use quick disconnect connectors. Positive (Red) and negative (Black) indicators to ensure proper wiring | Package included: 2pcs Speaker Box with gaskets and 8pcs screws

Compatible with Nissan: 1995 - 1998 240SX, 2003 - 2005 350Z, 1995 - 2005 Altima, 1998 - 2005/(XE and SE with no options) 2012 Frontier , 1995 - 2005 Maxima, 2004 - 2005 Quest, 1995 - 2006 Sentra, 2004 - 2005/(S model only base) 2012 Titan, 2000 - 2008/(X MODEL) 2011 Xterra, 2008-2010 2012 Pathfinder S, 2005-2007 Pathfinder (non-NAV) , 2003-2007 Murano, 1995-1998 200SX, 1995-1998 240SX, 2003-2009 350Z. | Replacement for Infiniti: 1999 G20, 2003-2005 G35, 1996/2000 I30, 1997 Q45, 1997-2001 QX4, 2003 G35 - Tan Dash Bezel, 2003-2007G35 Coupe, 2003-2008 G35 Sedan, 2003 G35- Black Dash Bezel, 2003 G35- Silver Dash Bezel, 2004 G35-BlackDK, 2004 G35-SilverDK, 2004 G35-TanDK, 1996-1999 I30, 1995-2003 Q45, 1997-1999 Q45 Bose, 1997-2000 QX4, 1997-1999QX4 Bose, 2004-2010 QX56. | The nissan stereo upgrade wire allows to install an aftermarket amplifier and speakers to the OEM radio Fit radio without cutting any factory wires. | Made of high quality wire material, and all the wires are there using standardized color codes, which made installing the head unit a breeze. | Easy to use. Wire harness do not directly plug and play, Solder connections and heat shrink tubing for best results.

Replacement for Volkswagen radio adapter: Radio CD Player 1998-2010 Beetle, 1993-2002 Cabrio , 1990-1993 Corrado, 2002-2003 EuroVan, 1992-1997 EuroVan, 1987-1993 Fox, 1986-2001 Golf. -Compatible with Mercedes-Benz, C Class 2001-2004, CLK 2001-2005, Sprinter 2007-2013. For Dodge: 2007-2011 Sprinter. Land Rover Freelander 2002-2006. Pontiac: 2004-2006 GTO. Porsche Cayenne 2003-2010. | Fit for Audi: Cassette Symphony Radio 1996-2002 A4, 1998-2003 A6, 1997-2003 A8, 1996-1998 Cabriolet, 2000-2008 S4 with Symphony Radio, 1992-1996 S6, 2000-2003 S8, 2000 - 2005 TT. 1988-1991 90, 1993-1995 90, 1989-1994 100, 1989-1991 200. | For Power acoustic NAV PDN-621HB,PH-620SXMB,PL-51B,PL-52B,PCD-51B,PCD-52B, PTID3200,PTID3600,PTID6250,PTID710B,PD-620HB,PD-621XB,PD-625B,PD-1032B PD-450,PD-625XB,PD-710. For Boss bv9974, bv8975b, bv9958, bv7320. | Easy to use, Pre-stripped wires are using standardized color codes. Professional pure core designed which makes excellent conductivity and long service life. | For replacing OEM radio wiring harness connector to upgrade car stereo. Without cutting any factory wire cable required.

72-5602 harness Fit FORD Model: Edge (2015-UP), Escape (2013-UP), Explorer (2016-UP), F150 2015-2020, F250 / 350 / 450 / 550 (2017-UP) Front Door ONLY, Focus 2013-2018, Fusion (2013-UP), Mustang (2015-UP), Transit (2015-UP), Mondeo MK4 2007-2015,2021 Bronco door speaker. | 72-5602 harness Mazda 2 (2011-2014), Mazda 3 (2014-2015), Mazda 6 2007-2020, CX-5 (2013-UP), 2016-2022 Mazda MX5, 2016-2020 MIAT, 2004-2008 RX8. LINCOLN: 2016-2019 MKX. | Speaker wire cable make of copper, tinned to copper wire to prevent these metals from being corroded by acids and alkalis, Perfect to replace aftermarket speakers to factory harness | Easy to install, Larger positive and smaller female slide speaker connectors | Speaker harness was double sealed by black electrical tape at the head of plug for protection

16 PIN Compatible with Kenwood KDC 3080, KDC 4040, KDC 4050, KDC 4060, KDC 4070, KDC 4080, KDC 5040, KDC 5050, KDC 5060, KDC 5070, KDC 5080, KDC 6040, KDC 6050, KDC 6060, KDC 6070, KDC 6080, KDC 7040, KDC 7050, KDC 7060, KDC 7070, KDC 7080, KDC 8040 R, KDC 8060, KDC 8070 R, KDC 8080, KDC 9050, KDC 9050 R, KDC 9060 R, KDC 9080 R, Fit for KDC-X996, KDC-X997, KDC-X998 | KRC 150, KRC 151, KRC 156, KRC 157, KRC 1570, KRC 158, KRC 256, KRC 2560, KRC 257, KRC 2570 R, KRC 258, KRC 259, KRC 356, KRC 358, KRC 359, KRC 456, KRC 457, KRC 458, KRC 459 R,KRC 556, KRC 557, KRC 558, KRC 559, KRC 656, KRC 657, KRC 658, KRC 659, KRC 756, KRC 757, KRC 758, KRC 759 R, KRC 856, KRC 857, KRC 858 KRC 859, KRC 956, KRC 957, KRC 958, KRC 959 R, KRC 992 | KDC-W ---ALL SERIES: KDC-237,241,3031,3034,3037,3041,3047,4031 | This is an 16-PIN wiring harness power plug. Allow to install an aftermarket head unit using the existing factory wiring and connectors | Easy connection. Wire harness has been color coded that is matched up the wire colors of your factory one. Use silicone adhesive to prevent the internal terminals from moving and added heat shrink for good measure

Radio harness connector 71-1761, not compatible with factory amplified systems and JBL stereo sound systems. | Car stereo wire harness replacement for Toyota: 2017-2019 C-HR, 1993-2019 Corolla, 2001-2019 Prius1999-2018 Tundra, 1992-2019 4 runner, 2002-2018 Camry, 2012-2018 Prius C, 2017-2019 Prius Prime, 2012-2017 Prius V, 2013-2018 Scion FR-S, 2014-2018 Scion iM, 2007-2017 FJ Cruiser (non-JBL), 2005-2018 Scion tC, 2006-2018 Yaris, 2009-2018 Scion iQ, 1999-2018 Avalon, 2000-2019 Highlander, 2004-2014 Matrix, 1996-2019 RAV4(NON-JBL), 1996-2019 Sienna(non-JBL), 1988-2019 Land Cruiser. | Radio wire connector compatible with Subaru: 2010-2019 Subaru Legacy, 2013-2019 Subaru Outback, 2012-2019 Subaru WRX, 2012-2019 Subaru Impreza, 2012-2019 Subaru BRZ, 2010-2019 Subaru Forester, 2015-2019 Subaru Crosstrek. | The in dash sound cables allow to upgrade your factory CD Player and install an aftermarket radio using the existing factory wiring and connectors without cutting any factory wire. | Easy to use. All the wires are there using standardized color codes, which made installing the head unit a breeze. Wire harness do not directly plug and play, Solder connections and heat shrink tubing for best results.

FUNCTION: HDMI anti dust cap cover protect HDMI port of device from dust and oxygen when port is not in use. Soft and elastic, fully blocking any gap more effective dustproof and moisture, tightly fitted and not easy to fall off | FIT: It is fit for HDMI female port, such as TV,computers,converter,etc.(Note: just designed for HDMI female port, please check whether the device is HDMI female port before purchase, in case it is not applicable) | FEATURE: Insulated and protected device port, to make it look like new for a long time. effectively reduce the static electronic products, to avoid a breakdown event | MATERIAL: Anti-dust plugs made of silicone, soft and flexible material, easy to put on and take off.Environmental protection and no peculiar smell | PACKAGE: 50pcs/package, small size, easy to carry and use, one pack can meet your need

【Function】DC anti dust cap cover protect DC power supply port from dust and oxygen when it is not in use. Soft and elastic, fully blocking any gap more effective dustproof | 【Application】Fit for all DC port, such as ethernet switch, router, etc.(Note: just designed for DC port, please check whether the device is DC port before purchase, in case it is not applicable) | 【Protector】Insulated and protected device port, to make it look like new for a long time. effectively reduce the static electronic products, to avoid a breakdown event | 【Soft Silicone】Anti-dust plugs made of silicone, soft and flexible material, easy to put on and take off.Environmental protection and no peculiar smell | 【50PCS】50pcs/package, small size, easy to carry and use, one pack can meet your need