**𝗜𝗠𝗣𝗢𝗥𝗧𝗔𝗡𝗧** 𝗕𝗮𝘀𝗲 𝗦𝗶𝘇𝗲 - 𝟭.𝟲𝟴 𝗶𝗻𝗰𝗵𝗲𝘀 (𝟰𝟯𝗺𝗺 𝘅 𝟰𝟯𝗺𝗺) - The tapered square base that fits into the tripod measures 1 11/16” (43mm x 43mm) across in both directions - this is what fits into the opening mount of the tripod head | For use with certain models of Torjim 60-Inch AX60, 67", Endurax 66" ETR66, 67", UBeesize 60-inch TR60, KingJue KingJoy 60" VT-860, Victiv 72" T72, Zomei Q111, Jolican 65" H65, Mactrem PT55 tripods and others; See product description for complete list of compatible tripod models | QR release plate mounts to the tripod mount allowing you to attach a camera, or cell phone tripod adapter, to a compatible tripod head quickly and easily | Extra QR plates allow you to conveniently swap out more than one camera or device with the same tripod and more than one quick release base plate | The DaVoice quick release plate requires no tools to tighten the screw; Any use of other brand names or models is made solely for purposes of demonstrating compatibility

PCI express power cable adapter connects a PCIe video card with an 8-Pin or 6-Pin PCIe connection to a power supply with a SATA power connection | PSU upgrade saver power cable provides an option for a power supply without a PCIe connection for GPU power; a SATA connector is designed to power a PCIe video graphics card from an older PSU via a 6-Pin or 8-Pin PCIe connection | 8 pin PCIe to 15 pin SATA female to male cable provides a convenient solution for video graphics card power with SATA connector for GPU cards that require more power | Sturdy graphics card power cable has a male SATA connector with keyed rails and a female (6+2) Pin PCIe connector with a latch for a secure connection on each end to prevent accidental disconnections | 6 pin PCIe to SATA cable is compatible with graphics cards from popular manufacturers such as Gigabyte, Radeon, and Sapphire

Waterproof Active GPS antenna with SMA male connector | Magnetic base allows you to conveniently attach it to to the roof of your car. | 28 dB of gain with its built in LNA | Cable length: 3 meters | DC Voltage: 3V to 5V

Compatible with: Car GPS Navigation; Car Stereo FM AM Radio; Sirius XM Satellite Radio; DAB Digital Radio; 4G LTE Telematics; | Connector: Fakra Z Water Blue Male Connector; | Connector: Fakra Z Water Blue Male Connector; | Length: 30cm / 12 inch; | Package List: 1 x Cable (As the Picture Shown)

High-performance wireless data transmission chip NRF24L01 +, an increase of high-power PA and LNA chips, RF switches, band-pass filters and other professional full bidirectional RF power amplifier, making the effective communication distance has been greatly expanded. | NRF24L01P + PA + LNA wireless module works in the license-free 2.4G ISM band, can be point-to-point applications can also form a star network. | In the RF part of a large number of optimized matching debugging, making the highest transmission efficiency, the smallest harmonic, making NRF24L01P + PA + LNA wireless module to external radio equipment to achieve the lowest radio frequency interference, but also not susceptible to interference from other devices, extremely large Improve the stability of the work. | NRF24L01P + PA + LNA wireless module is highly integrated, the size of only 41mm * 15.5mm, easy to embed in any space-stressed products. | Customers only need to add one MCU to control NRF24L01P + PA + LNA through SPI port ,Wireless module to complete ultra-long-range wireless data transmission system design.Do not need to worry about R & D of RF part, drastically reduce R & D expense and shorten R & D cycle.

Main chip: MAX3232; Operating voltage: 3.3V-5V; Interface: TX, RX, GND, VCC; Bauds: 300 to 115200. | Supports 3V to 5.5V power supply and provides bidirectional data communication at baud rates up to 115.2 Kbps. | This converter can be connected to an Arduino Serial pin (0,1) to convert standard Arduino TTL to RS232. It allows Arduino talk to hundreds of RS232 devices. | This converter uses MAX3232-based level shifter for converting TTL (Transistor-Transistor Logic) -level serial to standard RS232 serial. | Application: RS232 is widely used in radio modifications,phone flash, XBOX360 flash, GPS, vehicle detection, DVD flash, hard disk repair set-top box upgrade. It can be used to program STC MCU, NXP MCU, Renesas MCU, STM32 MCU, N+-2EC MCU.

Car Antenna Replacement: come with 3 different size adapters, it fits most vehicles and is a good choice to replace old or broken roof mounted antennas on cars, trucks, hatchbacks, SUV, camper,motorcycle | Easy to Install: unscrew the old antenna, pick correct size adapter, screw the new antenna right into the existing roof mount or antenna base with the adapter | Improve Radio Reception: by utilizing high quality internal stainless steel, the antenna will enhance AM FM signal reception, which enables you get more clear stations with no static | Flexible Mast: the external part is made of flexible rubber for preventing the antenna from being broken off easily | Package Includes: 1pc car antenna 6.9 inch+ 3pcs mounting screw adapters (M4, M5, M6) | Note: the antenna is compatible with most cars, but does NOT fit Jeep Grand Cherokee / Renegade / Wrangler JL, Mazda mx-5 and Ford Fusion

Includes 2 pieces black anodized aluminum heatsink. | Pre-applied 3M 8810 thermal conductive adhesive tape backing. | Can be applied for passive cooling of Water cooling modules, 3D printers stepper motor, NEMA 17, TEC1-12706, TEC1-12710 Thermoelectric Peltier Cooler etc. | Dimension: 3.15 x 1.57 x 0.43 inch / 80mm x 40mm x 11mm (L*W*H). | Unit Weight: 1.2 oz / 35 gram per piece.

Compatible With: Specially designed for Apple iPod Touch 7/6/5, Apple iPod Touch 7th/6th/5th Generation | Heavy Duty Protection: Unique edge TPU is combined with the built-in PC to protect your touch from drops, scratches and bumps | 360° Rotable Kickstand Design: Metal kickstand can rotate 360°, easy to rotate and sturdy on the case. Built in kickstand gives you the convenience to watch videos and movies hands-free. | Precise Cutout: All buttons and interface user-friendly design to avoid frequent disassembly. And the case perfect cutouts for speakers, camera and charging hole | Package included: 1 X Case for iPod touch 5/6/7, 2 X HD Screen Protectors

One set of metric screws. | Four screws in total. | Works ONLY with original stands, NOT universal stands. | NOT for wall mounting.

One set of metric screws. | Four screws in total. | Works ONLY with original stands, NOT universal stands. | NOT for wall mounting.

Compatibility: The lens hood shade for Canon EF-M 15-45mm f/3.5-6.3 IS STM lens and Canon RF-S 18-45mm f/4.5-6.3 IS STM Lens on Canon EOS R7, R10, M50, M50 Mark II, M5, M6, M6 Mark II, M200, M100, M10 replaces Canon EW-53 hood | Replacement: Replace Canon EW-53 lens hood. | Flexibility: 49mm filter and 49mm lens cap are allowed to attach. | Professional Design: Non-glare matte finish on the interior surface to further prevent or limit lens flare. No vignetting with the hood on. | Protection: Protects your lens from accidental impact and the elements.

One set of metric screws. | Four screws in total. | Works ONLY with original stands, NOT universal stands. | NOT for wall mounting.

One set of metric screws. | Two screws in total. | Works ONLY with original stands, NOT universal stands. | NOT for wall mounting.

One set of metric screws. | Four screws in total. | Works ONLY with original stands, NOT universal stands. | NOT for wall mounting.

One set of metric screws. | Four screws in total. | Works ONLY with original stands, NOT universal stands. | NOT for wall mounting.

MOTHERBOARD MATE 90 degree SATA III cable is specifically designed to connect motherboards and host controllers to internal Serial ATA hard drives and DVD drives | BLAZING FAST SATA III SPEEDS up to 6 Gbps deliver superior performance for a custom gaming or RAID configuration; Provides secure connections for fast and reliable file transfers; Backwards compatible with SATA I, II, III hard drives | LATCHING RIGHT-ANGLE connector is an indispensable tool for securing difficult to reach connections in small cases; Low profile SATA data cable has a flexible jacket to allow an efficient and organized installation in tight computer cases; Bright cerise colored cable provides easy identification when troubleshooting | COST-EFFECTIVE 3-Pack SATA cables provides spare or replacement hard drive cable for a last minute installation or to fix troublesome connection problems | COMPATIBLE with popular SATA equipped devices such as: Asus 24x DVD-RW Serial-ATA Internal Optical Drive, Crucial MX100 BX100 MX200 SATA Solid State Drive, Kingston240GB SSD V300 SATA 3 Solid State Drive, LG Electronics 14x Internal BDXL Blu-Ray Burner Rewriter, Samsung 850 EVO SSD 850 Pro SSD, Seagate 3TB Desktop HDD SATA 6Gb/s 3.5-Inch Internal Bare Drive, Extreme PRO 240GB, SIIG DP SATA 4-Port Hybrid PCIe, WD Black Performance Desktop Hard Drive, WD Green Internal Hard Drive

SSD Heatsink Thermal Pads for Steam Deck: the Pure Copper Heatsink is sepcially designed for Steam Deck 2230 SSD ONLY. | Heatsink and full set opening tools: ssd heatsink and full set tools for removing back plate, include copper heatsink, opening pry tools, thermal pads, screwdriver and screws. | Pure Copper Heatsink: Pure Copper has good heat dissipation, it will reduce the overheating risk of your steam deck, improve the game experience. | Phase change and silicone thermal pads: the thermal pads can not only improve heat dissipation, but also can make the ssd surface flat, to aviod bumping up against the Shield cover. | Package include: 1x Copper Heatsink, 2x Phase change thermal pads, 2x Silicone thermal pads,1x screwdriver, 1x Opening pry bar, 1x Triangle Pry Tool, 18x Screws(8 long and 8 short for back plate, 2 for SSD).

One set of metric screws. | Four screws in total. | Works ONLY with original stands, NOT universal stands. | NOT for wall mounting.

It fits Canon EF-S 18-135mm f/3.5-5.6 IS USM Lens on Canon EOS 90D 80D 77D 60D, also fits the Canon RF 24-105mm F4-7.1IS STM Lens on Canon EOS R5 R6 RP R Camera Note* Don’t fit EF-S 18-135mm f/3.5-5.6 IS STM & EF-S 18-135mm f/3.5-5.6 IS & RF 24-105mm f/4 L IS USM. | It replaces Original Canon EW-73D Lens Hood. | Made of high quality ABS material, reversible design allows you to mount the hood in reverse for compact storage. | Non-glare matte finish on the interior surface to further prevent or limit lens flare. No vignetting with the hood on. | Protects your lens from accidental impact and the elements.

One set of metric screws. | Four screws in total. | Works ONLY with original stands, NOT universal stands. | NOT for wall mounting.

One set of metric screws. | Seven screws in total. | Works ONLY with original stands, NOT universal stands. | NOT for wall mounting.

One set of metric screws. | Four screws in total. | Works ONLY with original stands, NOT universal stands. | NOT for wall mounting.

One set of metric screws. | Four screws in total. | Works ONLY with original stands, NOT universal stands. | NOT for wall mounting.

One set of metric screws. | Three screws in total. | Works ONLY with original stands, NOT universal stands. | NOT for wall mounting.

Reduces glare, haze and reflections from non-metallic objects and glass surfaces | Linear filter that can be rotated to achieve desired effect | Designed for digital and 35mm SLR cameras and video cameras | Filter thread: 52mm | Easy screw-on attachment

Inlcudes 2 x High quality plastic center pinch front lens cap + 2 x Deluxe elastic lens cap keeper | The front lens cap protects your lens from scratches, fingerprints and the elements when the lens is not in use | The deluxe lens cap keeper prevents loss of your lens cap and make your photography more convenient | Easy to use: Simply pinch the center of the cap to quickly attach to the front of your camera lens, as to the lens cap keeper, attached with the 3M adhesive pad or loop through the cap attachment hole | Compatible with any camera lenses with 67mm lens thread size, Please note your camera's lens thread size will be marked somewhere on the lens barrel

One set of metric screws. | Eight screws in total. | Works ONLY with original stands, NOT universal stands. | NOT for wall mounting.

Unique Scalloped Design Prevents Lens Flare While Protecting Lens And Improving Contrast & Image Quality | Can Be Used With Virtually Any Threaded Filter Or Lens Barrel | Digital Hard Lens Hood With Rear Locking Ring | Will Attach to Any Brand Lens That Has A Filter Mount / Diameter of 55mm

One set of metric screws. | Four screws in total. | Works ONLY with original stands, NOT universal stands. | NOT for wall mounting.

One set of metric screws. | Four screws in total. | Works ONLY with original stands, NOT universal stands. | NOT for wall mounting.

One set of metric screws. | Four screws in total. | Works ONLY with original stands, NOT universal stands. | NOT for wall mounting.

One set of metric screws. | Four screws in total. | Works ONLY with original stands, NOT universal stands. | NOT for wall mounting.

Two sets of metric screws. | Eight screws in total. | Works ONLY with original stands, NOT universal stands. | NOT for wall mounting.

One set of metric screws. | Four screws in total. | Works ONLY with original stands, NOT universal stands. | NOT for wall mounting.

One set of metric screws. | Eight screws in total. | Works ONLY with original stands, NOT universal stands. | NOT for wall mounting.

A NULL MODEM SERIAL CABLE enables two DTE or DCE devices to communicate with no conflict in data transmission | - Connects two PC serial ports | - The transmit and receive signals are crossed to ensure proper data transmission

One set of metric screws. | Four screws in total. | Works ONLY with original stands, NOT universal stands. | NOT for wall mounting.

One set of metric screws. | Four screws in total. | Works ONLY with original stands, NOT universal stands. | NOT for wall mounting.

Lifetime warranty repair kit for iMac 27" 2012-2015