EXTREME PERFORMANCE: Straight-fin design with twice the height of other heatsinks for extra heat dissipation performance whether actively or passively cooled. Mandatory for applications in high temperature, sealed, or overclocked applications. Heatsinks increase the surface area for heat transfer but still requires temperature gradient to be effective. | LONG LASTING EXACT FIT: CPU and LAN chipset heatsinks are fabricated specifically for the Raspberry Pi 4 Model B. Double-sided thermal transfer tape offers high thermal conductivity and long lasting adhesion in all mounting scenarios. | QUICK AND SIMPLE INSTALLATION: Peel and stick in the orientation with the most airflow. Most effective solution for reliable performance and longevity. No more messy thermal paste and compatible with LoveRPi Power over Ethernet HAT v2 for Raspberry Pi 4. | MAXIMUM FREQUENCY FOR LONGER: Maintain 1.5GHz for more than a minute before throttling kicks in. That is 5x longer than without a heatsink. Decrease idle temperatures by 20°F for longer component life and more reliable operation. | MUST HAVE FOR RASPBERRY PI 4: The SoC and USB 3.0 bridge require heatsinks since they exceed 50°C. Other components like LPDDR4 and gigabit PHY are best passively cooled since they are near components with higher z-height that may short circuit. Please attach the heatsinks as pictured to avoid accidental damage to the Raspberry Pi 4 Model B board.

Hex Head with Phillip's Head Screwdriver Slots | 6/32 (#6) Screw Diameter | Commonly used for fastening case sides. | Can be used to mount motherboards, hard drives, power supplies, etc. that use #6 screw mounts.

Superiorly Constructed with Aluminum Material for Durability and Longevity. | NovelGoal Aluminum Ball Head Mount Compatible with Different Devices like Action Cameras, Phones, GPS and More. | 1/4" Screw Adapters Ready for Easy and Hassle-free Attachment. | Perfect for Mounting and Holding on to Different Surfaces and Angles with its Ball Head. | Ball Head Mount Offer Greater Flexibility and Compatibility with Various Mounting Accessories.

In four different configurations | 650-MB and 74-minutes of recording capacity | Organic dye recording film material | Polychromatic substrate material | 1.6 track-pitch, 50 ~ 116 mm recording area

【Compatible Devices】 Nikon Digital SLR DSLR D3400 D3500 D5600 D7500, Nikon 1 J5 1J5 UC-E20，Canon PowerShot SX720 HS Camera Charge Charging Cable. | 【FAST CHARGING & SYNC】 Micro USB Cable 5FT, A Male to Micro B;USB 2.0 supports 480Mbps transmission speed and charging speed up to 2.4A; This usb cable connects your digital camera to USB-ready computer, USB hub or photo printer/dock for pictures transferring. Mac and PC compatible.Photo Transfer Camera is suitable for Nikon cord from camera to computer. | 【DURABLE & HEAVY DUTY】:Integral Seamless stretch process, high pressure resistance. with a tested 10000+ bend lifespan,more durable with best price for long life usage. | 【In The Box】: 5Feet USB-A to Micro-B USB Cable*1 | 【After-sales guarantee】FEIYIU products are sold after strict testing.If you have any quality problems, please contact us. We will provide 365 days of after-sales guarantee service.

【NOTE⚠️】:The contact area of charging is 3*3mm（0.12*0.12Inch）, and the distance between the center of two dots is 10mm(0.39In).Please measure the distance between the magnet charging port of the toys before purchasing.(Measurement methods：Measure whether the distance between the center point of two magnet charging ports is equal to 10mm or (0.39In) | 【Attention⚠️】:Please make sure your toys distance between the center of two dots is 10mm(0.39In). | 【HIGH QUALITY】:This usb magnetic charging cord is made of pure copper core,which make it more durable and safer. | 【FEATURES】:The diameter of the magnet on the charging cord is 3mm, and the center distance between the two magnets is 10mm(0.39inch).Charging via USB Port of Wall charger、Power Bank、Latop/PC、Car Charger、etc. | 【GUARANTEE】:30 Days Money Back Guarantee.One Years Free Exchange.If the charging port is wrong,you can contact us directly,our professional service team alway here for helping.

Specially designed for Tile Mate (2020 & 2018 & 2016) / Tile Pro (2020 & 2018) / Tile Style / Tile Sport / Cube Pro Smart Tracker. | Premium genuine leather exterior with delicate stitching and soft microfiber interior protect your delicate Tile from dust and scratch when clanging with keys, adding minimum weight and feel comfortable. | Precise speaker cut-out won’t diminish the Tile volume even i

Item Condition: Brand New | 12 Months Quality Warranty | Actual item as shown in photos | Random send the part number | NOTE: Kindly compare your original item with the photos provided for the listing to make sure that you are purchasing the correct part. we don't provide technical assistance please make sure you are familiar with the product before purchasing. apologize in advance.

VERY IMPORTANY! PLEASE CONTACT OUR CUSTOMER SERVICE TO CONFIRM THE KEYBOARD AND MOUSE VERSION. USUSALLY WE WILL SEND YOU FROM CHINA IF YOU BUY BEFORE JULY.2018 | VERY IMPORTANY! PLEASE CONTACT OUR CUSTOMER SERVICE TO CONFIRM THE KEYBOARD AND MOUSE VERSION. USUSALLY WE WILL SEND YOU FROM CHINA IF YOU BUY BEFORE JULY.2018 | Please ensure if the third led of keyboard will light when install batteries and turn on power switch | If the third led of keyboard will light but no response, the keyboard lose connection with USB receiver. Pls try to pair them with USB receiver as follow: | a. turn off keyboard power and unplug the USB receiver; b. press and hold ESC & "=+"; c. turn on keyboard power, you will find the power led keep flashing(it means keyboard are searching the USB) d. plug USB receiver to USB ports quickly, pls move keyboard closer to receiver within 7 INCHES e. Release ESC & "=+"

✔Great Quality and High Speed Sync: Super Speed, Supports high speed USB 2.0 devices, Data Transfer Speed at up to 480 Mbps, and is backwards compliant with full-speed USB 1.1 (12 Mbps) and low-speed USB 1.0 (1.5 Mbps) | ✔Universal Compatibility: SCOVEE Mini USB Cable Compatiable with all Mini USB 5-Pin device like Canon PowerShot ELPH 180 190 300, XS400, 300 HS, A1400, SD600, G7X, SX400is, etc, C

【Parameters】- Rated Power : 0.5W ; Resistance : 8 Ohm; Diameter : 10mm/0.39"; Hight: 3.5mm/0.14"; Shape: Round. | 【Feature】- The 0.5W speaker component has Unique design, adopted well-performed magnet, imported rubber coil. | 【Advantages】- This 8ohm speaker is a high quality speaker as a replacement for your sound system, and high sensitivity, loud voice, good and clear sound quality. Adequate volume, it will be your best choice if you have a good application. | 【Application】- Small magnate speaker will be your best choice in DIY speakers and It will work well for home audio-visual equipment and other speakers, it will be your best choice if you have an ideal application. | 【Package Contents】- 2Pcs X Magnet Speaker

★【 Classic and High Quality 】 Fashion print cotton canvas webbing and PU leather, The matched nylon and high-tensile plastic fasteners with quick release buckles. Comfortably worn around the shoulder or neck. | ★【 Suitable For 】 The universal strap with quick release buckles fits for all brands of etc. DSLR SLR cameras, while it can be used for other equipments like phones, binoculars, monoculars, rangefinders, tools, and so on. | ★【 Adjustable Length 】 Strap length: 28in/71cm; strap width: 1.5in/3.8cm. The adjustable length makes the camera strap applicable to most camera users. | ★【 Good Design 】 WANBY camera neck shoulder belt strap has an comfortable elastic section around the neck to reduce neck tension,anti-slip layer inside helps you to prevent accidental slip of your expensive camera. | ★【 Note 】 Purchase WANBY's product, it provided by Amazon prime 100% guaranteed High quality service!

1 Male 15 pin SATA | 4 Pin Floppy Drive | Length: 8 Inch | It converts a SATA Power 15pin connector into a 4pin Mini power connector | Power connector for Devices requiring a Mini connection

EFFECTIVE SOLUTION FOR CABLE CLEAN-UP - Cool tone design with 7 slots, it enables you to organize 7 cables with a single cable clip, it's compatible with cables measuring 6mm in diameter or less, works for speaker wires, computer wires, audio wires, camera cables, internet cables, twisted headphone cords, and much more. | SOLID MATERIAL - Constructed by durable silicon material instead of poor plastic, Baskiss cable clip is more robust to hold multiple cables at a time and maintain good elasticity. | STICKY IN ALL SURFACES - Works in all surfaces, plastic, wood, glass,etc. and enables easy access to all your cables in the position that you want. Sticky in the surface you put. | GOOD ADHESION - Easy to use self-adhesive backing allows you to peel and stick to desired surface as needed. | MESSY FREE - Quickly and easily put your cords and cables inside the clip to ensure it doesn't get tangled again. In this way you can keep them organized and it saves maximum space for you.

【New Design for AirTag Wallet】The only sun shape design on the market，fashionable and versatile. The length and width of the credit card size fits most wallet slots and can stabilize the Airtag without increasing the thickness of the wallet. The weighs only 8.8g, will not cause any burden to your wallet. | 【Airtag Wallet Case- Hardness Upgrade】 Made of premium ABS material, safe, environmentally friendly, durable and sturdy. The thickness of each Airtag wallet case is 2.55mm, so you don't have to worry about it being deformed or broken easily during use. | 【Compatible with Apple AirTag】This airtag wallet card case cover is specially designed for Airtag, the product size is compatible with Airtag and can fit tightly without falling. The AirTag case also has a key ring hole, could be used on a key chain or in your purse or backpack, convenient to carry. | 【Safe, and Effective Locating】Our card for airtag design can make your tracker not so easy to be exposed, while it will not affect its signal. The card cover protect your AirTag from being scratched and lost, and help you trace your wallet. | 【Package Included】 2*AirTag Holder Case (AirTag NOT included), 2*Carabiner Clip. If you have any question about the products, please feel free to contact us via email, we will solve the problem for you within 24 hours.

Package include: 6pcs F type to sma adapters (2x f male to sma, 2x f female to sma male, 2x f female to sma female) | Commonly Used in RF Applications, Antennas, Wireless LAN Devices , Coaxial cable, Wi-Fi Radios External Antenna, >1000 Times Mating Life Time. | Impedance :50 ohm | Connector Material:Pure brass with Great connectivity.(Not Alloy) | Life time Warranty

Better Than Finger - The high-quality and ultra-sensitive stylus pen can be smoothly used on any screens of digital products,responsive as finger touch | Anti-scratch Tip - Our stylus tip was made of soft, and scratch resistant rubber. Fingerprint resistant and anti-stick screen tip, great for drawing writing etc. | Share With Your Family and Friends - Get 10 of stylus with an unbeatable price com

Focus On Pure Essentials：24K gold-plated contacts, triple shielding jacket, tough nylon-braided cover, secure-fit design, pure metal housing, and oxygen-free copper core, every single details we made uniquely is to ensure to present the best quality of 3.5mm Auxiliary Audio Cable in the market. Contemporary and with an emphasis on simplicity, DuKabel 3.5mm Aux Cord focus on pure essentials. They w

The is an indoor 75 ohm FM antenna, with an push-in F connector, Very easy to install, just plug it into the back of the stereo or radio. | This FM stereo antenna designed for improve the FM signal, help you get more stable fm signal and stations for stereo receiver radios. Stretch the end of the antenna as far as possible away from the device for the best reception. | 4.9 feet length Applicable t

HIGH-ACCURACY, HIGHLY DURABLE: High-accuracy voltage detection circuit, fine workmanship and durable, Effective life greater than 50000 hours. | MULTIPLE PROTECTION: Over-discharge protection, overcurrent protection, overcharge protection, short circuit protection; A combination of 4 safety features that work together to provide ultimate protection for your devices, your chargers and most importantly:you. | LOW STANDBY CURRENT: MOS transistor can control the battery charge and discharge, low standby current consumption. | WIDELY APPLICATIONS: Use for variety of capacities and various shapes 3.7V lithium batteries,Massager battery pack, LED light backup power supply, solar street light battery pack, monitor standby power supply, etc. | ATTENTION: Strictly according to the diagram wiring: B+: connected battery positive, B-: connect to battery negative, P+: connection charge / discharge positive, P- connection charge / discharge negative, Otherwise it will cause damage to the chip. After connection,it need to first charge activation, then will have the output.

Perfectly fit for Logitech MK850 Performance Wireless Keyboard | Closely paste the keyboard surface and fitted each key perfectly | Quality silicone material, durable, healthy and environment friendly | Removable and washable, keeping it clean and makes it always new | Waterproof and dustproof, protect your laptop against spills, dust, and other contaminants

100% Brand New Quality product | Work for Logitech C922x Pro Stream Webcam / Logitech HD Pro Webcam C920 and C930e | Protect the Webcam Clean，Farewell the dust | Package includes: 1 X Black Webcam Protects Lens Cap Hood Cover

MULTIFUNCTION: With this multifunctional 2.5mm to C1 sync cable, it connects Remote Trigger to Camera, helps you to build connection between your camera and your flash trigger. | COMPATIBILITY: The cable will work on most flashes that take a remote control triggers. | CONNECTOR: 2.5mm Plug to C1 with 2.5mm Sub-Mini Connections. | CABLE LENGTH: 1.2M. | PACKAGE INCLUDED: 1 x 2.5mm to Male Flash Cabl

AT ELAGO ALL CASES ARE DESIGNED JUST FOR YOU with a simple and functional design in mind. These cases support BOTH WIRED AND WIRELESS charging for AirPods 2 & 1. We want to make your life SIMPLE AND HASSLE FREE! | THE PROBLEM WITH MOST CASES ARE that they don’t fit correctly and don’t protect from drops well. ELAGO CASES ARE MADE WITH premium silicone and a special coating applied inside the cap to PREVENT IT FROM FALLING OFF to give you the BEST DROP PROTECTION! | THE CASE ALWAYS STAYS on with the hinge design - NEVER HAVE TO WORRY about losing the cap or it falling off. Since the case was MADE SPECIFICALLY FOR AIRPODS, FULL ACCESS TO ALL FEATURES and functions are a given! | PERFECT GIFT FOR any AirPods user! Great for BIRTHDAY PRESENTS for loved ones and gifts during the holiday season – ESPECIALLY CHRISTMAS FOR STOCKING STUFFERS! | elago is a DESIGN COMPANY FIRST AND FOREMOST. Our motto is SIMPLE SOPHISTICATION because we create products that are USEFUL AND AWESOME! WE ALWAYS CREATE products that WE OURSELVES USE, so we know YOU WILL LOVE IT!

Specially designed for Tile Mate (2020 & 2018 & 2016) / Tile Pro (2020 & 2018) / Tile Style / Tile Sport / Cube Pro Smart Tracker. | Premium genuine leather exterior with delicate stitching and soft microfiber interior protect your delicate Tile from dust and scratch when clanging with keys, adding minimum weight and feel comfortable. | Precise speaker cut-out won’t diminish the Tile volume even in the pocket; Easy to locate button position and allows for effortless button press. | Keychain ring closure keeps the case stay closed and avoid Tile sliding out accidentally. Bundle it with most things. | Fintie gives your smart tracker classic look. (Note: Smart Tracker is not included.)

Includes: 2 Pick Tools, 2 Screwdriver Tools, 2 Scraper Tools, 1 Glass Suction Tool | Usage for Kit: removal and installation of cracked, scratched, or damaged glass screens | Compatible with: Motorola Moto G6 G7 Play G7 Power G7 Supra X4 Z Z4 | DOES NOT INCLUDE GLASS LENS REPLACEMENT

Features: these LCD board replacement pens are featuring no oil, no ink, no dust, not easy to break, following the operating principle of pressure painting, convenient for your different uses | Easy to use: these replacement stylus are stable and smooth to use, light in weight and compact in size; No need to install batteries, you can rest assured to use | What you get: you will receive 24 pieces of LCD stylus pens, enough quantity for your daily uses and replacements, no more worrying about losing a stylus and not being able to replace it | Wide applications: these replacement touch stylus pens can be widely applied to dictation board, calculus paper, drawing board, message board, but not suit for ipad, tablets or regular electronic drawing boards; These are only suitable for LCD drawing boards | Size detail: each LCD board pen measures approx. 4.8 x 0.35 x 0.14 inch/ 122 x 9 x 3.5 mm, can be placed in some drawing board's slot; Please note it only fits for those drawing board designed with memory slot, which depends on the brand and specification of drawing board

Package included:20PCS fan anti-vibration screws | Color:black | Material:silicone | Size: approx 44*7.5mm (L*Max Dia) | Universal-Design fits most Fans

High thermal conductivity rate. | Soft and tacky. easy to apply | Can be cut to any desired size. | Not electric conductive to prevent any electronic damage. | Always free track-able shipping.

It can protect the hot shoe from scrathing, keep it clean, and avoid moisture. It's very easy to carry and be operated. | Suitable For: CANON NIKON PENTAX FUJI OLYMPUS | Material: Aluminum | Color: Silver

Brand New and High Quality and Fast Ships from USA | Latest Version 3.0\ | Supports any micro SD card as long as you format it,it support memory card up to 256GB with more faster loading speed | Faster loading speed; Perfect support PSV 1000/2000 | Please note: Must have HENKAKU or a VITA running Firmware 3.60.

This 4-pin (female) socket fan connector kit allows you to create your own fan power cord. | The connector is compatible with 2-pin and 3-pin, 4-pin fans (depending on whether you have a third RPM RPM wire). | The shell is made of durable black nylon 66 material. | The kit includes: 5 4-pin female connector housings and 20 terminal crimping pins. | We are committed to providing the best products and services. If you are not satisfied, please contact us.

FEATURES: Mini-USB to USB Cable - Long 6 Feet - For use with Tablet, Smartphone, Cell Phone, MP3 player, Digital Camera/Camcorder | SPECS: Supports Hi-Speed USB 2.0 Universal Data Transfer Speed at up to 480 Mbps | SAFETY: Pwr+ cables manufactured with the highest quality materials. CE/FCC/RoHS certified. | WARRANTY: 30 Days Refund - 24 Months Exchange. PWR+ is WA, USA based company. We are friendly Customer Support Experts | COMPATIBILITY: Wacom Intuos Pro PTH451, PTH451M, PTH651, PTH651K, PTH651M, PTH651S, PTH651SE, PTH651SEM, PTH851, PTH851M; Intuos5 PTH450, PTH650, PTH850; Bamboo CTE450, MTE450. Check Connector Photo to Ensure Compatibility

✨【6 Pairs Memory Foam & Silicone Earbud Pads】Two kinds of ear bud pads for you choose, total 6 pairs, includes small, medium, large 3 pairs silicone ear bud pads and small, medium, large 3 pairs memory foam replacement in ear ear buds. | ✨【with Storage Box】Well protect your ear bud tips from being damaged, and easy to store your headphone buds, also can be used to put original tips. | ✨【Soft and Comfortable to Wear】Will not produce any pressure, no painful for long time wear. Slow rebound earphone, improve the comfortability when wear. Soft and fitting your ear, long time to wear without swelling. | ✨【Anti-noise】This earphone pads can isolate the external noise interference, even in the noisy environment, you can hear your music clear. | ✨【Fit for Most 5-7mm Earphone Tip】Small, medium and large size, suitable for most 5mm-7mm earphone tips. Can easy and firmly insert to ear, and not easy to fall out.

UNLIKE OTHER GENERIC CASES THAT are mass produced, all of our cases are designed IN HOUSE FROM SCRATCH. From a concept, all the way to a finished product, every aspect of creating a product is done in-house to ensure that you get a case that WILL FIT PERFECTLY, HELP PROTECT FROM DROPS, AND LOOKS GREAT - SAVING YOU TIME AND MONEY! | MOST COMPLAINTS ABOUT CASES ARE that they don?t fit properly and pop out of the case. With an elago case, this is something you NEVER HAVE TO WORRY ABOUT. All cases are created with our own 3D mold, so you now that what you get is made EXACTLY FOR YOUR PRODUCT - meaning all functions, like WIRELESS CHARGING, work with NO PROBLEMS! | PREMIUM SILICONE MATERIAL PROTECTS YOUR charging case from everyday use, including DIRT, OIL, SCRATCHES AND DROPS. Silicone also provides GREAT GRIP and a SLIM PROFILE, allowing it to FIT IN YOUR POCKET! Carabiner is INCLUDED so that you can HANG the case from your backpack, purse, pants, etc. | PERFECT GIFT FOR anyone using the new device! Great for BIRTHDAY PRESENTS for loved ones and gifts during the holiday season - ESPECIALLY CHRISTMAS FOR STOCKING STUFFERS! | elago is a DESIGN COMPANY FIRST AND FOREMOST. Our motto is SIMPLE SOPHISTICATION because we create products that are USEFUL AND AWESOME! WE ALWAYS CREATE products that WE OURSELVES USE, so we know YOU WILL LOVE IT!

Designed with double ports (receptacles) allow you to plug-in two electrical devices (connectors) at once (Does not Convert Voltage) | Type D Works in India, Pakistan, Sri Lanka, Tanzania, Bangladesh, Bhutan, Botswana, Burma/Myanmar, Chad, Congo, Democratic Republic of, Dominica, French Guiana, Ghana, Guyana, Iraq, Jordan, Lebanon, Maldives, Martinique, Namibia, Nepal, Niger, Nigeria, Saint Kitts and Nevis, Senegal, Sierra Leone, South Sudan, Sudan, Vietnam, Zambia, Zimbabwe | US Patented Universal Input: Accepts plugs from all countries (except the Type M - big S. Africa 8.7mm Plug) | New conductivity design - internal metal interfaces provides better conductivity. Grounded 3 Round Prong plug. Max Capacity Up to 3000 Watt (max 250 Volt, 13 A) | NOTE: This Adapter does Not convert Voltage. Make sure your device is Dual Voltage or Support 220-240 Voltage to be used overseas

Compatible with Beats Studio Buds | Made of High Quality Silicone Materials | Sound Isolating Design Reduces Ambient Noise for High-intensity Listening | Package Includes: 3 Pairs Earhook tips & 1 Pcs Fiber Cleaning Cloth with "ALXCD" Logo

12pcs Aluminum Computer Case Thumbscrews for Cover / Power Supply / PCI Slots / Hard Drives. | All the screws are full threader; Standard metric threads pitch. Color: Wine Red | These thumb screw has an extra large head with a straight knurled surface for additional grip for manual adjustment. | These quality crafted thumb screws provide quick installation for securing cases and can easily be tightened by hand without much force. | Thread Size: M3 x 6mm/0.12" x 0.24"(D*L); Total Length: 17mm/0.67"

CONTROL YOUR CABLES: Whether for your laptop cords, chargers, headphones or other cables, out 20 pack of cable ties will keep your cables neat and organized and out of your way. | WIDE USAGE: Suitable for a variety of cables, our cable ties come in 3 different cable strap sizes: 10??x0.8??, 6??x0.6?? and 5??x0.5??. | REUSABLE AND DURABLE: Made from fabric material with attachments, our cable wraps are designed to last through many uses. | MULTI-COLORED: Color coordinate your cables and cords easily with our cable ties; each cord wrap comes in black, white, blue, pink and yellow. | SPECIAL DESIGN: Our cable ties are specially designed to fix your cables to the straps quickly and easily so you can spend less time worrying about cables and more time getting your work done.

This 4-pin (male) socket fan connector kit allows you to create your own fan power cord. | The connector is compatible with 2-pin and 3-pin, 4-pin fans (depending on whether you have a third RPM RPM wire). | The shell is made of durable black nylon 66 material. | The kit includes: 5 4-pin female connector housings and 20 terminal crimping pins. | We are committed to providing the best products and services. If you are not satisfied, please contact us.