This cable is for the Nucleus-M give you run/stop capabilities in camera systems that support it,Such as ARRI Alexa Camera or other Camera with R/S port. Note that this cable was specifically designed for the Nucleus-M, so the R/S function only works with the Nucleus-M's own hand unit and handles. | The 7 pin Male connect to the Nucleus-M Wireless Follow Focus Motor, the Fischer 3 pin connect to the R/S port of the camera. | Plug A : 0B 7 Pin Male Connector, Plug B: Fischer 3 Pin Male Connector. | Cable Length : 24Inches/60CM (We can customize with other length, please contact us if you need). | Each cable we produce has been rigorously tested and is compatible with machines from a variety of major brand suppliers,We are committed to all the products are qualified and high-quality.

62mm Nano IR ND1000 Neutral Density 10 Stop (3.0) Filter - NiSi 1 Year Limited Warranty | Ultra-Thin frame | 10 Stops Exposure, No Color Cast | Top Smooth Finish on the Surface | Matt Black Superfine Frosted Frame.

Run stop cable for Nucleus M motor to RED Epic and Scarlet camera, not for DSMC2 camera like EPIC/SCARLET DRAGON | Fit for Tilta Nucleus-M’s own hand unit and hand grips, focus motor | Fit for RED Epic and Scarlet DSMC1 Camera Sync port | Connectors: 00B 4 pin to 0B 7-pin. Length: 60cm | This 7-pin to 4-pin cable for the Nucleus-M allows you to have run/stop functionality by going straight from a motor into a Red DSMC1 camera’s SYNC port

Built-in highlight LED: light provides the auxiliary lighting for the video clips | TTL function: TTL full-automatica flash is to automatically adjust the flash intensity of the flash lamp for the correct flashing according to the feedback signal from the photometry of the camera lens | High precsion manual adjustment: 8 Power levels, each level has 3 fine tuning adjustment, providing you a more precise brightnessoutput and flexible brightness control | Strobpscopic flash function: The strobosopic flash is to record the continuous motion of the subject in a picture in virtue of the continuous flash of the electronic flasher | S1/S1 mode S1 mode: It is suitable for the manual mode and when the master control flashlight is on, the remote control flashlights will be triggered; S2 mode:It is suitable for the master TTL mode, and only when the second flash of the master control flashlight is present can the remote control flashlights be triggered

Brass Ring for higher Quality Image | Highest possible polishiing technique | World's best optical glass | New thinner Pro mount. No vignetting | USA Warranty

The Lens Oak protects your lens against bumps and scratches. | It is made of Neoprene material: soft from the inside and water resistant on the outside. | Easy to install and it keeps your lens as new. | Specifically designed for your Canon RF 100-400mm F5.6-8 IS USM | in 5 colours: Forest Camouflage, Brown Camouflage, Green Camouflage, Black and True Timber HTC camouflage

【Enhancing Color & Contrast】Polaring filter (CPL) to remove the reflection from non-metallic surfaces, such as water and glass, enhance the color and contrast, especially for white clouds and blue sky photography. | 【All-New Brass Frame Design】Classic brass frame with CNC design, sturdy and durable, smoothly install on lenses. | 【36 Multi-Layer Coated】Both glass of the nanometer coatings, waterproof, and scratch resistant, ensures the filter with 45% transmittance and removes 99.2% polarizing light, with no effect on the image quality. | 【Ultra-Slim Frame & No Vignetting】0.01mm machine technology, ultra-slim frame perfectly avoids vignetting on telephoto and wide-angle lenses. | 【Advanced Coated Technology】K&F Concept with well-known coated technology lowered the reflectivity to 1.5% and ensured high transmittance, effectively reducing the ghost and glaring, restoring the actual color.

【Enhancing Color & Contrast】Polaring filter (CPL) to remove the reflection from non-metallic surfaces, such as water and glass, enhance the color and contrast, especially for white clouds and blue sky photography. | 【All-New Brass Frame Design】Classic brass frame with CNC design, sturdy and durable, smoothly install on lenses. | 【36 Multi-Layer Coated】Both glass of the nanometer coatings, waterproof, and scratch resistant, ensures the filter with 45% transmittance and removes 99.2% polarizing light, with no effect on the image quality. | 【Ultra-Slim Frame & No Vignetting】0.01mm machine technology, ultra-slim frame perfectly avoids vignetting on telephoto and wide-angle lenses. | 【Advanced Coated Technology】K&F Concept with well-known coated technology lowered the reflectivity to 1.5% and ensured high transmittance, effectively reducing the ghost and glaring, restoring the actual color.

【Enhancing Color & Contrast】Polaring filter (CPL) to remove the reflection from non-metallic surfaces, such as water and glass, enhance the color and contrast, especially for white clouds and blue sky photography. | 【All-New Brass Frame Design】Classic brass frame with CNC design, sturdy and durable, smoothly install on lenses. | 【36 Multi-Layer Coated】Both glass of the nanometer coatings, waterproof, and scratch resistant, ensures the filter with 45% transmittance and removes 99.2% polarizing light, with no effect on the image quality. | 【Ultra-Slim Frame & No Vignetting】0.01mm machine technology, ultra-slim frame perfectly avoids vignetting on telephoto and wide-angle lenses. | 【Advanced Coated Technology】K&F Concept with well-known coated technology lowered the reflectivity to 1.5% and ensured high transmittance, effectively reducing the ghost and glaring, restoring the actual color.

【Enhancing Color & Contrast】Polaring filter (CPL) to remove the reflection from non-metallic surfaces, such as water and glass, enhance the color and contrast, especially for white clouds and blue sky photography. | 【All-New Brass Frame Design】Classic brass frame with CNC design, sturdy and durable, smoothly install on lenses. | 【36 Multi-Layer Coated】Both glass of the nanometer coatings, waterproof, and scratch resistant, ensures the filter with 45% transmittance and removes 99.2% polarizing light, with no effect on the image quality. | 【Ultra-Slim Frame & No Vignetting】0.01mm machine technology, ultra-slim frame perfectly avoids vignetting on telephoto and wide-angle lenses. | 【Advanced Coated Technology】K&F Concept with well-known coated technology lowered the reflectivity to 1.5% and ensured high transmittance, effectively reducing the ghost and glaring, restoring the actual color.

【Variable ND2-32ND & CPL Filter】One filter both has a light reduction effect and also can enhance the color and contrast. The variable neutral density filter reduces 1-5 stops of light. The CPL Function can remove unwanted glares from a non-metallic surface. Strongest effect when used at a 90° angle from the sun. | 【Ultra definition imaging】 The true color variable ND filter solved the common problem of partial yellow and color shift, showing the true color of the image and video. When the light goes through the filter, it won’t be affected by the coating and there's no color cast, even in long exposure mode. Our filters will not cause X shadow or vignetting in most usage scenarios. Please read the product instructions carefully or just contact with us if you have any question. | 【Optical Glass with Nano Coating】Made by importing ultra-white optical glass, double side 30 multi-layer coatings, the reflectivity can reach less than 0.15% to reduce flare and ghosting. Protect the filter from water, oil, dust, and scratches. | 【Aircraft Grade Aluminum Frame】Filter frame is made of aircraft grade aluminum alloy frame. It screws easily into the camera. The CNC precisely machining knurling on the mounting ring makes it easy to get snug enough to not spin off while adjusting the ND/CPL function. Simply rotate the putter to adjust from ND2 to ND32 on the frame, convenient to be sure the ND filter stops. | 【NOTE】Please verify your camera's lens thread size before ordering. Searching your lens and find the diameter symbol "Ø" followed by a number, this usually can be found on the front or side of your lens, or printed underneath the front lens cap-this magic number is your filter size. We have checked all the filters before send them out. If you fee unsatisfied in any way, please email us. We will provide you with satisfactory solutions.

【All-around Protection】Nitze JTP2-LUT7S cage kit compatible with Feelworld LUT7/ LUT7 PRO/ LUT7S/ LUT7S PRO 7" monitors is designed for providing your monitor an all-round protection without obstructing any ports. | 【Convenient & Durable】Built-in NATO rails on the top side make your accessories expansion more quickly and convenient. And the screw sleeves on the bottom of the cage increase the durability of the threaded holes. | 【Extensive expansion】Multiple 1/4" locating holes, 3/8" locating holes and built-in cold shoe provide more possibilities for mounting additional accessories. The reserved 1/4” locating hole on the right side is compatible with mounting Feelworld original support. | 【HDMI Cable Clamp】The PE21 HDMI cable clamp on the bottom of the cage can firmly fixes your HDMI cable and prevents it from shifting or being damaged. | 【Sunhood】The included sunhood reduces the interference of external light source on the display image color, allowing your Feelworld LUT7/LUT7 PRO/LUT7S/LUT7S PRO monitor more clearly visible during shooting.

Heliopan’s premier 82mm Short Metal Lens Hood blocks unwanted light rays from entering the lens by way of extending its front end. This prevents lens flair and greatly improves image contrast. In addition, this lens hood functions as added protection for your lens. | The highly functional Short Metal Lens Hood has the same diameter at both ends and can accommodate additional lens hoods for desired length and/or filters, lens caps, or other 82mm-threaded accessories. | Manufactured from the highest quality German metal, the Short Metal Lens Hood is specially treated to withstand powerful UV rays, extreme temperatures, and adverse weather conditions without warping, cracking or fading. | Our use of brass ensures a secure and sturdy fit and is less likely to bind or cross-thread after extended use. | We do not source any materials outside of Germany in the assembly and construction of our products. All raw materials are prepared and hand-assembled in our factory and do not leave our facility until they are completely inspected by our quality technicians.

【All in One Wireless Spy Cam】Undassenk hidden camera is 1.4*1.4*1.5 inch with 2600mAh Powerful Battery.It has 1080P HD Live Video, 150° Wide Angle, Motion Detection,IR Night Vision, Recording while Charging, Playback/Snapshot/Record Remotely, Alarm Reminder, Long Standby, Video Sharing features and more, perfectly compatible for both iOS and Android devices.You can also turn off the indicator light in the APP, completely hidden in the corner, it is a veritable hidden camera! | 【Powerful Battery Life】Undassenk Spy camera with built-in 2600mAh rechargeable lithium battery, it has two working methods to improve the battery life. 1: All-day Recording Mode: The hidden camera can record 24/7 in a loopfor up to 9 hours. 2:Low Power Mode: In this mode, the recording can last for 15 days; if the camera does not detect motion within 30 seconds, it will enter the sleep state and stand by for two months. Entering the App can automatically wake up the device. | 【Upgraded Night Vision and Motion Detection】The mini camera is equipped with 8 invisible infrared LED and advanced CMOS sensors, with night vision distances up to 18 feet, providing clear video even in complete darkness. When the spy camera detects a moving object, it will immediately push an alert message/picture to your phone.Also,the upgraded IR motion detection will better sense people/pets to prevent false alarms. | 【1080P Spy Camera and 150°Super Wide Angle】The mini spy camera features an advanced 2.0 MP image sensor and 150 degree wide angle lens,that captures details clearly and show excellent image quality better than other cameras.Connect the camera to your home WiFi (Only support 2.4GHz )by APP, you can watch and record the Live video anywhere. | 【SD Card Storage and Video Sharing】This spy camera hidden camera works with cloud storage(Free for one month)and SD cards Storage to secure your data.Use your private account to log in and share your camera to your families or friends.It supports 128GB SD card ( not included). If SD card in this camera is full, the oldest files will be overwritten automatically.If you have any questions or issues about your purchase, please feel free to tell us and we will gladly assist you at any time!

【Magnetic 1 Second Swap】This magnetic variable ND2-ND32 filter with magnetic technology, install the magnetic filter adapter ring on the lens first, then the filter can be absorbed in 1 second, faster installation than traditional thread filter (6s).

Leading-Edge Thunderbolt 4 Cable: Experience cutting-edge connectivity with the Cable Matters Active Thunderbolt 4 Cable, the longest active cable on the market supporting both Thunderbolt 4 and USB 4 standards. This long Thunderbolt 4 cable offers exceptional 40Gbps data transfer and 240W charging. | High-Speed Charging and Data: Certified Thunderbolt 4 cable enables blazing-fast 40Gbps data transfers and power delivery up to 240W with PD 3.1, making it perfect for charging and syncing Thunderbolt 4 devices with a single cable. | Superior Display Capabilities: This active Thunderbolt 4 cable boasts enough bandwidth to drive one 8K or two 4K displays, providing high-definition video and authentic audio for an unmatched viewing experience. | Broad Compatibility: Fully backward compatible, this Thunderbolt 4 cable seamlessly works with older Thunderbolt 3 devices. Future-proof your setup with a cable that supports all the latest features. | Versatile USB4 Functionality: Doubling as a USB4 cable, this versatile connector supports up to 40Gbps data transfer depending on USB4 device and host compatibility. With USB-C backward compatibility, it supports features like DP Alt Mode and USB PD, ideal for devices like the iPad Pro and MacBook Pro.

Versatile design holds satellite speakers up to 3.5 lbs. These speaker stands are compatible with Bose, Harmon Kardon, Polk, JBL, Sony, and more. | Optimize your listening experience with 10" of height adjust. Easy to use collar makes height changes a breeze. Holds your speakers between 28" - 38". | Built from steel with a wide base to deliver high-quality sound. Built-in cable management channel helps keep your speaker wire out of the way. | Set Includes top plate, L-shaped brackets and keyhole adapter to maximize compatibility with your speakers. | Experience the Sanus difference. Comes with a 5-year warranty, and top-notch customer service. Our experts are ready to chat 7 days a week if you have questions or run into a snag.

This Scosche car stereo wiring interface allows you to connect your aftermarket stereo with your car's factory radio harness. Utilizes standard wire color codes ensuring an easy install. See Fit Guide in images to verify that your vehicle is compatible. | Retain the use of your car's steering wheel controls and all safety and warning chimes with the Scosche radio harness kit and safely operate your radio while driving. | This factory radio replacement interface is designed to work with factory-amplified premium sound systems, ensuring a seamless integration with your existing car audio setup. Not compatible with Digital "Premium Bose" Systems (RPO Codes: Y91/Y92/Z75). Not designed for OnStar. OnStar function will be disabled | The car stereo wiring interface kit includes a power adapter that provides a data-driven +12V accessory (R.A.P.) output and wiring harness for easy connection and installation. Ensuring a dependable and consistent power source, enhancing the sound quality and performance of your aftermarket radio. | Compatible with BUICK: Enclave 2008-12, Lucerne 2006-10, CHEVROLET: Avalanche 2007-13*, Cobalt 2005-10**, Equinox 2007-09, Express Van 2008-21, HHR 2006-11**, Impala 2006-13, Malibu 2004-12**, Malibu Maxx 2004-07, Monte Carlo 2006-07 | Compatible with CHEVROLET: Silverado 1500-3500 2007-13*, Suburban 2007-14*, Tahoe 2007-14*, Traverse 2009-12, GMC: Acadia 2007-16, Savana 2008-19, Sierra 1500-3500 2007-13*, Yukon 2007-14*, Yukon XL 2007-14* | Compatible with HUMMER: H2 2008-09, H2T 2008-09, PONTIAC: G5 2007-09**, G6 2008-09**, G6 2005-07, Solstice 2007-09, Torrent 2007-09**, SATURN: Aura 2007-09**, Outlook 2007-09, Sky 2007-09 | Backed by Scosche's Limited Lifetime Warranty and Lifetime Tech Support

【Enhancing Color & Contrast】Polaring filter (CPL) to remove the reflection from non-metallic surfaces, such as water and glass, enhance the color and contrast, especially for white clouds and blue sky photography. | 【All-New Brass Frame Design】Classic brass frame with CNC design, sturdy and durable, smoothly install on lenses. | 【36 Multi-Layer Coated】Both glass of the nanometer coatings, waterproof, and scratch resistant, ensures the filter with 45% transmittance and removes 99.2% polarizing light, with no effect on the image quality. | 【Ultra-Slim Frame & No Vignetting】0.01mm machine technology, ultra-slim frame perfectly avoids vignetting on telephoto and wide-angle lenses. | 【Advanced Coated Technology】K&F Concept with well-known coated technology lowered the reflectivity to 1.5% and ensured high transmittance, effectively reducing the ghost and glaring, restoring the actual color.

Supports CAN To Ethernet And RS485, CAN Repeater (Bidirectional Transmission Between CAN Bus Interfaces), Etc. | Industrial-Grade Standard Design For Meeting Temperature And Voltage Requirements In Various Application Fields | The CAN To Ethernet Server Will Be Listening Configured Ports And Waiting For TCP Client Connections, Data From The CAN Device Will Be Transferred Via CAN Server To Every Connected Client | The CAN To Ethernet Server Will Try Establishing TCP Connection With Configured IP To Achieve Bidirectional Transparent Transfer Between The Server And CAN Device, And Keep Retrying If Failed | The CAN To Ethernet Server Will Send Data From The CAN Device To Specific IP Network Device Through UDP Packets, And Will Be Simultaneously Listening The Port And Send All The Received Data Back To The CAN Device | The Frame Structure Transmission In Working Mode Of Each Socket Includes Frame Information, Frame ID, And Frame Data, Compliant With CAN 2.0B Specification, Supports Operation By Any System | To Solve The Problems Of CAN Network Transmission Rate And Distance, And Expand The Number Of Communication Network | Receives The Data From CAN IDs Within The Configured Range Only, Filtering Out CAN Frames Outside The Range | CAN Heartbeat Packet: Sends Fixed Query Commands To The CAN Network Through Heartbeat Packet; Network Heartbeat Packet: Notifies Network Terminal That The Server Is Active To Maintain Normal Network Connectivity With The Server | Allows Server To Identify The Device Data Source, Or As A Password For Obtaining Server Function Authorization

Compatible with Extra-Large TVs: The Pipishell advanced tilting TV wall mount is designed to hold most 42″-90″ TVs up to 132 lbs with VESA mounting patterns 200x100 to 600x400mm. Please verify the screen size, weight, and VESA pattern of your TV before purchase. | Enjoy 15° Full Tilt: This wall mount TV bracket features a full 15° tilt range that can be easily adjusted without tools. Simply loosen the tilt knobs, adjust the tilt angle, then tighten the knobs to secure the screen. The pull cord locking mechanisms allow you to lock or release the TV quickly and easily. | 6-inch Arm Extension: The unique articulating arms of this 85 inch TV wall mount extend out up to 6 inches for easier access to the power outlet and TV connections. When retracted, the tilt TV mount profile is only 2.91″ in depth. | Easy TV Centering: The advanced tilt TV wall mount 85 inch is designed with a wider wall plate that fits 16″ to 24″ wood studs, making it easier to position the wall mount TV bracket in your room. TVs with VESA width up to 500mm can be moved left or right to achieve perfect TV centering. | Hassle-Free Installation: The tilting TV wall mount 75 inch includes a drilling template and standard mounting hardware for hassle-free installation. Mount on wood studs, solid concrete, or brick walls. Please note that this wall mount TV bracket is not compatible with drywall-only installation.

Optional calibration kit for calibrating extech humidity meters | 33% and 75% relative humidity bottles | Bottle designed with small opening for snug fit of the sensor probe

【Creats Dream Cinematic Effect 】This black diffusion 1/4 effect filter could soften the wrinkles, freckles and pores of facial skin, making it more delicate, plump and gorgeous. The hazy film effect can be better realized, showing dreamily effect. Reconmending use it in video shooting and portrait photography. | 【28 Multi-Layer Coatings】Both sides of glass with waterproof, scratch resistant and oil proof coatings, easy for cleaning. Without any negative influence for the image quality. | 【Import Optical AGC Glass】 K&F Concept black diffusion 1/4 filter Made by Japanese AGC optical glass , multi coatings reduces the transmittance to 84% , effectively reduces reflection of filter surface. | 【Unique Nanotec】 The double polishing process ensure the high definition images within 550mm focal length. 100*100mm size square filter can fit most filter holder. | 【Package Includes】1*100x100mm filter， 1* leather filter bag.

K412CNMO Lip mount, 3-axis., UHF, 6.5ft coax, Medium-duty

Connects To: PC/Mac via USB-C, Bluetooth headset | Compact and Convenient: Refreshed look and compact form factor allows you to leave it in your laptop or PC to save space | Bluetooth Technology: BT v5.1 Bluetooth low energy technology gives you greater wireless range and faster connection to take calls anywhere | Compatible with Poly Voyager headsets

【Great for Portrait Video & Image】Via controls highlight flares to create soft light "pastel" and mist cinematic effect, contrast is lowered, but with less lightening of shadows. | 【1 Second Swap】The black diffusion filter via magnet attraction to install and remove the filter, reducing the wear out for lens threads. Package including 1 * magnetic black soft filter + 1*magnetic adapter ring + 1* filter lens cap. | 【28 Multi-Layer Coatings】Both sides of filter glass with nanometer coatings are hydrophobic, scratch-resistant, and durable. Made by Japanese import AGC glass, while maintaining the high transmission of light, ensuring image high definition quality. | 【Ultra Slim with no Vignetting】Ultra slim frame of only 3.3 mm avoids vignetting and dark corners on wide-angle and telephoto lenses, CNC-Non slip design is easy to install. | 【Note】The magnetic mist cinematic effect 1/4 filter is compatible with all 72mm lenses. Please verify your camera's lens thread size before ordering. This number is always beside a "ø" (diameter) symbol.

Multi-purpose tripod head made for small dslr, compact system cameras and accessories | Single lock: Easy locking and full pan and tilt movement | Features standard 3/8 Inches bottom attachment for versatility | Quick release: Uses the popular rc2/200pl style quick release | Smooth movement and strong lock comfortably holding up to 4 kg of kit | Weighs only 190 g

The Sunset color graduated filter is graduated red, orange and yellow to give a dramatic sunset effect | Soft edge grads have a smooth transition from clear to ND | The 0.6 filter reduces light by 2 Stops

Form factor, 1U | Rail Type, Sliding ReadyRails, Type A7

490 Center Ball Head - RC2 200LT-PL Plate - Manfrotto 10 Year Limited Warranty (6 Months + 9 Years & 6 Months Extension with Online Registration) | Easy locking and full pan and tilt movement | Safe and quick release plate attachment | Allows fast portrait camera positioning | Includes Manfrotto RC2 200LT-PL plate

QUICK FEATURES: For Tripods or Stands up to 27" | 27" Tripod with Head & Accessories | Padded Interior with Equipment Straps | Inner Accessory Pocket, Exterior Storage | Dual-Zippered Opening & Equipment Straps | Two Handles & Touch-Fastening Connector | Removable Padded Shoulder Sling Strap | Identification Window | Weather-Resistant Nylon Construction | Raised Rubber Feet | Exterior Dimensions: H: 7.5 x W: 7.5 x L: 28.3" / H: 19.1 x W: 19.1 x L: 71.9 cm | Interior Dimensions: H: 7.0 x W: 6.0 x L: 27.0" / H: 17.8 x W: 15.2 x L: 68.6 cm | FOR TRIPODS OR STANDS UP TO 27” WITH HEAD & ACCESSORIES: The bag fits a tripod or light stand that folds down to 27". It has a tapered shape to accommodate video tripods with heads attached, and is also convenient for transporting items like umbrellas, boompoles, monopods, and sliders to your location | DUAL-ZIPPERED OPENING: The dual-zippered opening helps provide quick access to the contents, while the large sliders are easy to grab and offer smooth action | EQUIPMENT STRAPS: Interior straps for securing equipment | LIGHTWEIGHT AND THIN: The lightweight and thin profile is designed to carry your bulky tripods with ease. You can also use the bag for transporting items that you need to hand-carry to your shoot, such as umbrellas, collapsible softboxes, or boompoles | CARRYING OPTIONS: Sturdy dual carry handles are integrated into the bag to support the heaviest loads, and they have a touch-fastener wrap that puts comfort in your hands. A removable shoulder sling affords a convenient option in case your hands are full with other equipment | DURABLE OUTSIDE, SOFT INSIDE: The bag's exterior is made from lightweight and durable weather-resistant nylon fabric. Inside the bag, your gear is surrounded by a soft nylon fabric lining that won't scratch the finish of your equipment | ACESSORY STORAGE: An external 13-inch accessory pocket is perfect for storing extra quick release plates, remotes, or cables. This pocket comes with a removable divider so you can organize your additional tools. And inside is a touch-fastener compartment for other lighting accessories you need for your shoot | IDENTIFICATION WINDOW: This bag has an identification window on the side for your contact information, or for writing down what equipment is inside when used alongside other Ruggard bags | RUBBER FEET: Raised rubber feet on the bottom help in elevating the bag and minimizing any contact with dirt or moisture, as well as preventing undue wear and tear on the bottom of the bag

Designed for mounting Arri standard rosette-style accessories | A great mouting solution that fits tube sizes from 13mm-35mm or a flat object from 5mm-20mm | Allows for 360 degree rotation | Features extra 3/8in-16 female thread on the super claw | Clamp is made of aluminum alloy

1 watt power output | Frequency response: 100 Hz to 10 kHz | Top-loading CD player/MP3 CD player with multifunction LCD display with blue backlight | CD-R/RW compatible | Skip/search, forward, back, and repeat 1 or all

Amplifier Installation Kit | Street Glide: 2014+ | Road Glide: 2015+ | No Radio Flash Required | Plug n Play | For MXA Amplifiers | Includes Mounting Bracket

Rear projection TV Accessories | High Quality Replacement Bulb with housing | We recommend the OEM Solutions for the best picture quality, brightness, and lifespan. | For Optimal Brightness and Lifespan - choose the OEM Replacement Lamp. Restores 100% Brightness and Lasts Longer!

Designed for use with black and white film, but can be used with digital cameras for creative effects | Enhances the light green colour of leaves and foliage whilst darkening red tones | Manufactured using the highest quality heat-resistant tempered glass, which creates a smooth, clear image | Hard Coated HMC Multicoating process suppresses ghosting, flare and reflections, and increases light transmission | Fits lenses with a 77mm front filter screw mount

Thread size (mm): 77 | Effect / type: Monochrome | Multi-coating: Hoya multi-coated

Thread size (mm): 67 | Effect / type: Colour correction | Multi-coating: Hoya multi-coated

Filter type: K2 | Size: 67 mm | Filter factor: 2 (+1 stop)