ESP32-S3-DevKitC-1-N16R8 Flash: 16MB QD; PSRAM: 8MB QD; SPI Voltage: 3.3V | Most of the I/O pins on the module are broken out to the pin headers on both sides of this board for easy interfacing. Developers can either connect peripherals with jumper wires or mount ESP32-S3-DevKitC on a breadboard. | The ESP32-S3-DevKitC development board equipped with ESP32-S3-DevKitC-1-N16R8, a general-purpose Wi-Fi + Bluetooth LE MCU module that integrates complete Wi-Fi and Bluetooth LE functions. | ESP32-S3-WROOM-1-N16R8 cable can be used: USB Type A to Type-C cable or CC cable Note the distinction between the commonly used USB A port to Type-C cable that can only be charged, which cannot be used for communication between YD-ESP32-S3 and the host. | USB-to-UART Port and ESP32-S3 USB Port (either one or both), default power supply (recommended)

Dual core ESP-32 development board, 2.4GHz dual mode development board. There are two touch buttons, one is reset, the other is enable module to enter the halberd program mode. This Esp32 module charging cable doesn’t support type c to type c fast charging cable, only supports usb to type c ordinary charging cable | The module is ESP-WROOM-32 module, the peripheral uses the USB serial port to expand the type c interface, which can be directly debugged by a USB connected computer, and the data transmission is fast and stable. | The module supports for NodeMCU and other development environments, which expands the range of its resources available and greatly improves the ease of learning and development. Of course, it can also be widely used in Internet of things occasions, such as home automation, wireless industrial control, wireless positioning system signal | ESP32 development board support lua program, easy to develop, support LWIP protocol, Freertos, three modes : AP, STA and AP + STA. | ESP32 is a safe, reliable, and scalable to a variety of applications,the user can cut off the power of the CPU and use the low-power coprocessor to continuously monitor the status of the peripherals or whether some of the analog values exceed the threshold.

Works with any USB Bluetooth adapters, running in slave role: Pair with BT dongle. Led indicate Bluetooth connection status, flashing Bluetooth connectivity, lit the Bluetooth connection and open a port Backplane, when the bluetooth connection has not been established by pairing the AT command set baud rate, name, password, and set the parameters of the power save. After the bluetooth connection automatically switch to passthrough mode. | Using HC - 06 from module , which leads to the interface includes VCC, GND, TXD, RXD, reserved LED state output pin, MCU can state whether the bluetooth is connected through the foot, from machine KEY pin is invalid. | Interface level 3.3 V, the input voltage 3.6 ~ 6 V, current when the unpaired about 30 ma, matching after about 10 ma, no more than 7 V input voltage, can be connected directly to all kinds of single chip microcomputer, 5 V single chip can be connected directly, without MAX232 couldn't through MAX232. | The module is mainly used for short-range data wireless transmission,such as Bluetooth wireless data transmission,Industrial remote control, telemetry,Traffic, underground positioning, alarm,Smart home ect. | Industrial serial port bluetooth, Drop-in replacement for wired serial connections, transparent usage. You can use it simply for a serial port replacement to establish connection between MCU and GPS, PC to your embedded project and etc.

Replacement MB-124 black spring action belt clip. | Compatible with ICOM F3001 F4001 F3003 F4003 F3101D F4101 IC-V80 IC-V80E IC-U80 IC-T70A IC-T70E IC-M24 IC-M23. | Compatible with ICOM BP-264 BP-265 batteries. | Easily attaches to the back of the battery so the equipment can be carried on the belt. | Customer Services：30 days no reason to return, half a year limited warranty. | Package included：3Pcs MB-124 belt clip.

❃❃ Item: MP3 Player Audio Voice Module. | ❃❃ The DFPlayer perfectly integrates hard decoding module, which supports common audio formats such as MP3, WAV and WMA. Besides, it also supports TF card with FAT16, FAT32 file system. | ❃❃ Supported Sampling Rates (kHz): 8/11.025/12/16/22.05/24/32/44.1/48; 24 -bit DAC output, support for dynamic range 90dB , SNR support 85dB. | ❃❃ You can play the designated music without any other tedious underlying operations by a simple serial port. | ❃❃ Control modes: I/O control mode, serial mode, AD button control mode.

【Original Design】INS irregular white irregular gypsum,so white nd clean,looks like realstic white stone. Simple collocation and conception, shoot realistic large effect pictures for your loved product every second. | 【Fashion & High-end & Noble】 Reject low-end and inferior, each piece is so white,clean,luxury. Add a sense of sophistication to your favorite products. | 【Waterproof,Lightweight,Easy to Clean】 Our irregular gypsum cube props made of high quality hard aromatherapy gypsum material,lightweight and waterproof,durable,reusable and easy to clean. | 【3PCS Different size irregular gypsum 】Contains 3 different sizes white irregular gypsum to meet the different product photography.

Camera privacy slider: our webcam cover slide is enough sleek and sturdy, it won't break easily. | Mobile: ultra-thin, you can close the laptop cover normally without hindering. | Webcam lid: designed to offer the max privacy protection for you to possible no more of your privacy video or pictures will spread to internet, protecting the privacy of the family. | Laptop lens cover: with fresh flower pattern design, it is a great addition to your laptop and tablet. | Camera covers: fine workmanship, excellent texture, not easy to tear, and durable for a long time.

Fits camera flashes, microphones, video lights etc. that have Sony MI Multi-Interface Shoe | Protects contact terminals against scratches, dust, moisture or other damaging elements | Easy to install and remove | Helps store your devices in good condition | With the signature orange color, easy to spot

【3pcs Wireless Bridge kit】Adalov CPE369 contains 3pcs Wireless bridges,and with 100Mbps and 1000Mbps ports,with 16DBi high gain Antenna offers long range work distance up to 3KM, 5.8G wireless helps it get a higher network speed. Point to point wireless bridge with LED display to configure the PTP/PTMP connection, AP and Bridge operation mode. To achieve the CPE function, one needs to act as a transmitters and the others as 2 receivers. | 【Plug and Play - Point to 2 Points Wireless Bridges】Pairing by dialing wireless Ethernet bridges.CPE369 PTMP wireless bridge kit is easier to add users in a multipoint connection, instead of creating a series of individual connections. It is also great for extend network, video surveillance, and internet sharing for point to 2 points. | 【Easy to Install】WiFi Bridges can be installed on a pole or wall-mounted. It is used to connect CCTV cameras, buildings, sensors, corporate WAN connections, internet access, telecommunication masts, or anything else that requires a data connection. | 【3KM Long-range Work Distance】Long range wireless bridge comes with a 16 dBi directional antenna to expand the range up to 1.9 miles.It is perfect for PtMP or PtP interconnection over long distances.It can easily extend the network range in your house to the garage shop, barn, or video surveillance systems through Wi-Fi bridge signal transmission. | 【5.8 Ghz Offers Higher Speeds】The connectivity operates on 5.8GHz frequencies with high speeds and has better anti-interference performance, good compatibility, and strong anti-adjacent channel interference. The transmitter and receiver can "talk" to each other at up to 900Mbps,and supply LAN DATA RATE up tp 433Mbps,which is deal for voice and video transmission with low latency. | 【Great for Outdoor Usage】 IP65 waterproof/dustproof designed for outdoor environments where it can withstand harsh weather conditions.Whether it is sunlight, frost, rain, humidity, or hail, CPE369 outdoor wireless bridge can handle it all.It supports 24V POE power(2 POE adapters included),making network design and deployment even more manageable.So it can be installed in areas where power outlets are not readily available.Eliminating the mess of altering existing network infrastructure. | 【Security】CPE369 Wireless bridge security: WEP64/128bits,WPA,WPA2,802.1x . It is also important to establish secure connections to avoid any network risks. | 【Reliable Wireless Bridge and Save your Money】Point to multipoint wireless bridges provides a more economical method than laying cable or leasing a private line.Users are not monopolizing channels, but sharing one communication link, which makes the connection more reliable.ensure fast and efficient data transfer in a remote location and to make sure that all networked devices follow the same rules of data sharing and access. | 【All in One Package】3pcs CPE369 Wireless bridge kit:3 x CPE369 Wireless Bridges;3 x POE Adapters;3 x Metal Cable Ties;3 x Network Cables;1 x User Manual. | 【One Year Warranty】 Come with 1 year long warranty period.(Any concerns or questions, just feel free to contact us :)We will reply your within 🕛24 hours and do our utmost to help you :)

Made of high quality hard plastic material, sturdy, durable and long service life. | Helps prevent dust from camera parts, especially reduce dust from CCD/CMOS. | Small size and lightweight, easy to carry and store, convenient to use. | Professional manufacturing, stable characteristics and high reliability. | Portable lens rear cover body front cap kit fit for Minolta MD mount camera.

Cable has one female connector and four male connectors | Black sleeving with black housing | Only one connector has the yellow RPM speed / tachometer wire. This is done so the motherboard only gets one fan RPM speed reading and not get confused by multiple fan readings | *Note: 3-Pin Fan Connectors are 2 pin/wire only (No tachometer pin/wire)*

Package size: 98L x 215H x 213W | Voltage: 240.0 | Upgrading to the UniFi nanoHD AP quick and convenient | Allows you to mount the UniFi nanoHD AP over existing UniFi AP mounting brackets | No additional tools needed

【Package】3-Pack Replacement for Dymo Letratag White Paper Refills 91330 10697 ,Size：1/2 Inchx 13 Feet (12 mm x 4 m) Color：Black on White. | 【Compatible】Compatible for DYMO Label Maker Refills Paper White 91330 Work with DYMO Label Maker Printer LetraTag Plus LT100H, LetraTag Plus LT100T, LetraTag QX50, XR, XM, 2000, LetraTag QR. | 【Application】Replacement for DYMOLetratag Refill White Paper are suitable for indoor applications that adheres easily to common surfaces such as paper, file, and glass. | 【Features】Compatible DYMO Label Maker Refills Paper White Tape is print clearly, without any fading, smudges or defects.It's durable, easy to use and self-adhesive. | 【Easy to Peel】Split backing design makes DYMOLT 91330 LT labels easy to peel and quick apply.

The 3rd generation fantaseal stabilizer, with 2-hands holder design, allows you to carry heavy DSLR camera, which help you shoot more stably. Advanced Low Angles Shooting System for all DSLR cameras, DV, Compact Cameras, all action Cameras with a standard 1/4 inch thread. NOTICE: OTG Cable for Android Phone NOT INCLUDED!!! | Powerful anti-slip Cell Phone Clamp Mount for holding Cell Phone while shooting as the HD monitor in Sports. Compatible with iPhone XS iPhone XS Max iPhone XR 8 plus iPhone x Samsung , You can also control your GoPro by GoPro APP without GoPro remote control | Removable Mini Ball Head Hot Shot Tripod Adapter can be used to attach Video Lights, Flashes, LED Lights, or Microphones in any angle,any degree. | GoPro Quick Release Buckle Plate - Attach your DJI OSMO ACTION / GoPro Action Camcorders and other Actioncams to the Stabilizer .Perfect portable platform for GoPro Hero 11 / DJI OSMO ACTION/ Sony / Garmin Verb XE /DBPOWER/APEMAN/AKASO | Light weight Vibration Reduction EVA handle and ergonomic 2 hand holder design that alleviates stress by offering a comfortable, secure grip for long time use. Great for Skateboarding, Rollerblading, Motor Racing, Biking, Surfing, Hunting, Snowboarding, Skiing and any Extreme Sports Situation where stability is a must

【High Quality】The extended pivot arm is made of high quality PC material. | 【Multi-Angle Shooting】Same direction and vertical direction, allowing your camera to extend from multiple angles to capture images from different angles. | 【Flexible adjustment】Extended pivot arm easy to install and remove, providing excellent angle flexibility, the left and right shooting angles and front and rear shooting directions can be easily switched. | 【More Uses】Vertical mount for Gopro great for skiing, surfing, racing, mountain biking, motocross, rock climbing and other extreme sports. | 【Extensive Compatibility】Compatible with GoPro Hero 11 10 9 8 7 6 5 4 3+ Max Fusion Insta360 ONE X3 X2 X RS R Go 2 and compatible with AKASO, SJCAM, XIAOYI, DJI Osmo action 2 3.

PROTECTED FROM ELEMENTS: The water resistant speaker features corrosion and stain resistant removable mesh grills It is also rated as a completely waterproof speaker system which makes it perfect to use alongside a pool, lake, or beach | AMPLIFY YOUR HOME: Pyle?s 200-watt hydra marine speaker system is what you need to listen to high-quality audio on your boat, deck, poolside or outdoors Includes 35? three-way outdoor mini box speaker and complete mounting kit wires | 200-WATT PEAK POWER: The weatherproof integrated marine speaker system has a 100 watt RMS with 200 watts peak power Features a frequency response of 70Hz-21kHz with 4 ohms impedance and is equipped w/ quick connect / disconnect speaker terminals | SUPERIOR SOUND: The speaker system features a 24oz magnet structure that powers a 10" superior dome tweeter, 35" aluminum injection cone woofer, and a 175" wide dispersion cone midrange It also features a bass reflex vent for added bass response | UNIVERSAL MOUNTING: The speaker is protectively stored in a heavy-duty ABS cabinet w/ butyl rubber surround Designed to be mounted on a support bar, tubing, frame, or wall Includes mounting bracket, custom grills, installation hardware | Unit Boxing /Packaging May Vary

Compatibility: Suitable for all photographic chemicals including developer, stopper and fixer. | Material: HDPE | Package: 3x Chemical Storage Bottles + 3x stickers | Dimension: 23.5 x 7 x 7 cm/9.25 x 2.76 x 2.76 inch | Weight: 86g/0.19lb

Material: PP plastic. anti corrosion and acid resistant keep the chemical liquid fresh and stable. NO leakage and lightproof. | Capacity: 1000ml/0.26 Gal. | Package include: 3x chemical bottle + 4x sticker. | Dimension: 8.5 x 21.2cm/3.34x8.34inch. | Suitable for long term storing darkroom photographic chemical fixer, developer, stopper, LSD/DLP & special highly transparent photosensitive resin.

Compatibility: suitable for all photographic chemicals stopper, fixer, developer. | Dimension: 22cm*8.5cm/8.66*3.34in | Package: 3x Chemical Storage Bottles + 4x stickers | Material: HDPE | Weight: 86g/0.19lb

Material: HDPE plastic, chemical resistant and prevent light through. | Package include: 3x 500ml chemical bottle + 3x caps + 3x stickers | Compatibility: Suitable for all photographic chemicals including developer, stopper and fixer. | Capacity: 500ml/1pc | Total weight: 192g/6.77oz

Condition:New original | fit:for Lenovo T440 T450 T440S T540S L440 | Package includes:3pcs Laptop Mouse Track

Choose your most comfort size and enjoy all day comfort | Get these replacement parts instead of buying expensive whole new headset | Same sizes and materials as the parts when you first got the device | Easy 2 steps replacement and perfect fit | Compatible fit with Plantronics Voyager 5200 series wireless bluetooth headset headphone

3x1 HDMI Switch with Audio Extractor: It's not only a HDMI 3x1 Swtich with PIP fuction, but also a HDMI Audio Extractor. Comes with a 3.5mm to RCA cable, you have three modes of audio output. | HDMI 1.4 Version with HDMI Cable?This HDMI Switch input resolution: up to 4K@30hz,2016P,3D,supports Video EDID Pass Through, Audio EDID Settings: 2CH and 5.1CH, Our HDMI Switcher NOT support HDCP 2.2 | 3 HDMI input converter to 1 HDMI Display(Pass Mode)+ optical Toslink Output(5.1CH Mode) or stereo audio output(2CH Mode) come with RCA Cable; Automatic, Manual or Remote Switching | High Quality ABS plastic casing, 24K gold-plated connectors; Reduce signal loss, get a better output signal. ?Note: The switch cann't be used with other converter, such as HDMI to DVI Converter.? | Wide Compatible: Suitable for various HDMI source devices like Roku or Chromecast without dedicated audio output as well as Blu-ray/ DVD/ HD player, cable/satellite box, Amazon Fire TV,PS3/4, Apple TV, Xbox, PC/laptop, HD camera, HD DVR etc. (NOTE: Not for PS5)

Only compatible with Echo Dot (5th Gen, 2022 Release) purchased within the last 30 days | Make up to 3 claims during the term of your warranty | No deductibles or shipping fees | Receive a replacement device 2 to 3 days after you make a valid claim | Your Protection Plan will be delivered via e-mail within 24 hours | Your card will be charged immediately, plan starts when device is delivered | Cancel anytime, full refund in first 90 days | Fully transferable with gifts

5G tools and value confirmation built into the NetCloud Platform | Mobile wizard-based installation application for optimal set up and signal acquisition | Dual Connectivity: Simultaneous 5G and LTE network connections | “Captive modem mode” for singular router/adapter control and management | Deep wireless analytics assisted by machine learning | Carrier-class connectivity with multiple levels of test and recovery | Adaptive to any networking and SD-WAN environment | Zero-touch deployment and day-1 broadband without on-site IT staff | Advanced Remote Management suite

COMMON FORMAT:25 AuthorizID Proximity Black Wristbands 26 Bit Keyfobs 125khz access control Proximity Key Fobs formatted with the 26-bit H10301 standard format used on most access control security systems. | COMPATIBLE: These isoprox compatible contactless Proximity wristbands work with the same 26 bit weigand readers that both the 1386 ISOProx and 1326 ISOProx key cards work with. Compatible 125khz card readers include: Proxpoint Plus, Thinline II, MiniProx, RP40, RP10, RPK40, RP15, Prox80, ProxPro, EntryProx 4045, Bosch ARD-AYJ12, Viking PRX-2, and many more. | APPEARANCE: Black Wrist Band: Internal diameter 65mm, Fits the average wrist size | FACILITY CODE: These RFID access control wristbands come in the Facility code 70 | FREE TECHNICAL SUPPORT: Get help programming your INTELLid wristbands from our tech support team.

【EFFORTLESS PLUG AND PLAY SYSTEM】This reliable and flexible equipment is easy to set up with its steadfast plug and play system. With no need to modify terminal equipment settings or engage in tedious debugging, users can simply plug in the device and immediately put it to use. It also supports hot swapping, a feature that allows components to be replaced or added without shutting down the system, providing an unprecedented level of convenience and efficiency. | 【MULTIPLE CHANNEL CAPABILITIES】With its innovative design, this video multiplexer offers outstanding versatility by allowing for a single channel pass-through and 3 channel superimposed . This enables diversified video surveillance solutions, adapting to various surveillance requirements. Regardless of your monitoring needs, this 4 channel video multiplexer allows for a multi-channel , offering superior flexibility for your video surveillance operations. | 【ANTI-INTERFERENCE MODULAR DESIGN】Engineered with a modular design, this 4-channel video multiplexer effectively resists interference, ensuring a high quality video , from disruptions or quality loss. Exuding reliability, the anti-interference feature provides a stable and unimpeded flow of information, protecting your surveillance systems from external disruptions that might potentially affect the video 's quality. | 【EXTENSIVE DISTANCE】This video multiplexer boasts a transmitter and receiver that supports a remarkable distance of up to 400 meters. This capability can fulfill the needs of long-distanced installations, making it suitable for large-scale properties and areas. Despite the distance, the video quality remains uncompromised, ensuring clear and seamless video surveillance, no matter how far the takes place. | 【ENHANCED MULTIPLEXER CAPACITY】The analog video multiplexer is capable of transmitting four analog camera video simultaneously. This enhances the scalability of the surveillance system by consolidating video feed from multiple camera sources, streamlining monitoring activities, and providing more comprehensive surveillance. With this feature, the multiplexer proves to be an invaluable addition to any surveillance system, especially in locations that require multi-point monitoring.

Wide Application: 4 channel video splitter is suitable for school buses, buses, tank trucks, engineering vehicles, large trucks, boats, coaches, yachts, etc., to meet your various demands. | Easy to Operate: The host can be turned on, off and delayed and support to add full screen automatic display of left turn, right turn and reverse. | 4 Channel Video Splitter: The vehicle video splitter supports 4 channels of audio input, and supports 1 audio output, you can choose the display mode. | Support Information Overlay: The 4 ch backup camera system supports license plate numbers, time, driving information and other characters overlay. It is more convenient for you to use. | Multi Protection: The video splitter has safe head interface, DC12V 24V wide voltage input, with overload protection, short circuit protection and reverse connection protection.

This filter set includes several colored filters, can help you achieve different effects | Made of quality plastic material, sturdy and for long time use | Fine machining ensures the clearness of filter, can diffuse the light of flash evenly and change the color temperature | Portable and lightweight, easy to carry and store | Suitable for Fujifilm Mini 7S/8/8+/9 | | | | |

For all HI-8 camcorders | 120 min. | 2 pack

Clamps onto any flash unit with a circular opening of 2.5 to 3.5 inches | Includes a honeycomb grid | Includes four colored gels (Red, Yellow, Blue, and a diffuser)

4 GAUGE BLACK & 4 GAUGE RED COPPER CLAD ALUMINUM - 25FT EACH COLOR (50FT TOTAL) - HAND ROLLED | NOT AMERICAN GAUGE, SLIGHTLY UNDER AWG | VERY LOW RESISTANCE | HEAVY AND FLEXIBLE INSULATION JACKET | USE FOR POWER OR GROUND WIRE TO CONNECT YOUR 6 TO 80 VOLT APPLICATIONS

17' 4 Gauge Red Power Wire | 3' 4 Gauge Black Power Wire | 17' RCA Cable | 17' 16 Gauge Speaker Wire , 18' 18 Gauge Remote Wire | AGU Fuse Holder , 80 Amp AGU Fuse, Terminals, Zip Ties, and Screws

Gold Plated AGU In-line Fuse Holder, 1.6FT 4 Gauge GA black ground cable | 17FT 4 Gauge GA red power cable, High Quality Gold Plated Competition AGU Fuse | 17FT 16 Gauge blue remote turn-on wire,17FT 16 Gauge speaker wire | 17FT High Performance RCA Interconnect Cable, 3.3FT Split Loom Tubing,Bag of Terminals | High performance and professional car audio, ideal for with any car amplifier system,a fuse holder with 60AMP AGU fuse to protect the audio system from damage by the overload current

Developed for the on-site installation and maintenance of Analog Camera (CVBS) and HD Coaxial Camera, having TVI,CVI, AHD. (NOT Support IP Camera). | High-resolution 5.0 inches 800 (RGB) x480 wide viewing angle display, Viewing angle larger, more intuitive and easy to display the camera image quality. Support PAL/NTSC standard video signal | Video monitor tester built-in Pelco-D / P PTZ control protocol,etc. , through its own RS485 interface, the user can control the PTZ up, down, left, right rotation, and adjust one machine zoom, focus,aperture size. Multi-format video OUT port image generator, sending a variety of standard (e.g. PAL, NTSC) color graphics section | Power the camera with DC12V (1A) power output from the tester. It is helpful for demo and testing when the power supply is not available. | Rechargeable: Built-in 2600mA battery X 2,after charging 3-4 hour, working time lasts 11 hours

65W USB-C Cable Fast Charging : 5-Core thickened tin-plated copper design with E-mark chip, usb c to usb c cable ups to 65W fast charging. Power up your Pad from 0% to 50% in just 30 minutes-(Note: if you want to achieve super fast charging, pls use a 30W above USB C power adapter) | 4 in 1 USB Charging Cable : This 4-in-1 USB-C fast charging cable covers all your charging needs with 1 USB-A port, 1 Light -ning port, and dual USB-C connectors cable. Compatible with almost all devices, one for all, no more need for other cables. | Support Carplay & Android Auto : This dual head type c 4-in-1 multi charging cable can work with carplay and Android Auto, allowing you to charge and navigate simultaneously. All Port Support Data Transfer, and the data sync speeds up to 480Mbps.Transfer a 1G file in just 30 seconds (Video/media output not supported). | Safe Charging is Above All : This fast 4 in 1 USB C charging cable adopted with *Thickened Tinned Copper Wire and E-Mark Chip*, which enjoys greater electric conductivity to ensure Safer, Faster & more Stable Charging and extend the multi iphone charger cords life. With over 20,000+ bends and plug/unplug tests, this 4 in 1 usb multi charging cables comes with long-lasting durability even with frequent use. | About Wide Compatibility: This 4 in 1 usb fast charging cables can charge all Android phones/ iphones such as iphone 16/15/14/13/12/11 Plus Pro Max, tablets, laptops, pads, headphones, gaming consoles, etc. You can use this multi iphone/pad charger cord whether your charger adapter is USB A or USB C. | In the beginning of 2008, IDISON created a team designed exclusively to focus on charging cables. 16 years later, now, we have the largest charger source factory in China. Believe us, Choose us and then you will find surprise.

【Compatible Model】Only compatible with kindle paperwhite 11th Gen 2021 & signature edition (6.8")，Not compatible with other models. We have been committed to upgrading our product set, which includes 50PCS stickers starting from March 6, 2024. | 【4 In 1 Protection】This set includes 1 clear case, 2 HD screen protector, 50 funny stickers, 2 film application kit, which can provide comprehensive protection for the Kindle, preventing damage caused by scratch and drop. | 【Light Weight ＆ Slim】The clear case is made of advanced TPU material, with a total weight of only about 50g. The lightweight and slim protective case will not add extra pressure to your reading. | 【Upgraded Air Cushion】The four corners of the clear case are equipped with upgraded air cushion, which can effectively alleviate the impact force caused by accidental drop of the Kindle and protect it from harm. | 【Professional Support】If there are any questions, please feel free to contact our professional support team. A satisfactory solution to your problem is always available and we will be more than happy to help you.

Add extra wired Ethernet & USB 3 ports extra storage to your streaming device for connecting wired network,flash drive,wireless keyboard or whatever USB peripherals,Stable work at the same time.(please note: Not compatible with Fire Stick 1, Roku Stick/Express,Fire HD 10,Google Home Mini cellphones, tablets, and Laptops,USB only for charging.) | Support 10/100M wired network Ethernet connection, faster and more stable，and 3 ports (480Mbps) of Simultaneous data transfer possible.no buffering, no lag. | 4-in-1 integrated design, no need to combine, the signal transmission is more stable. The length is 3.3 ft. It is easy to operate and allows you to place it anywhere without worrying about loose connections. | Plug & Play,no additional driver/software needed. Just need to connect it to an available devices and LAN network, it will be activated. | Compatible with Fire TV Stick 4K,Streaming TV Sticks,Google Home Mini, Media Players,Chromecast Ultra / 3 / 2 / 1 / Audio,Raspberry Pi Zero, and Support Micro USB port TV stick,etc.

Packing List: 1* Soft silicone case for flipper zero; 1* Case set for flipper zero Wi-Fi Dev Board; 1* EVA Carrying Case; 1*Hand strap; 1* Carabiner | Precise cutouts and fits perfectly with Flipper Zero & Wi-Fi Dev board V1, Stripped-down design features your device in the crowd | The Wifi Board Case Set is free of tools & screws, easy to assembly, work seamlessly, Precise snap-fit designed for better fastening | The 360° front-and-back design slicone case for flipper zero provides full-body rugged protection for your dolphin friend, even the most difficult corners to protect - the protection part for the iButton has also been well designed with soft silicone | * The Flipper Zero Device is not included.