【NATO RAIL STANDARD】SMALLRIG BUN2468 is compatible with standard NATO accessories for quick release, such as clamps, handles and monitor holders, enabling you to quick attach and release the rig components | 【THIN & LIGHTWEIGHT】The thickness of SMALLRIG 2468 is 6mm, and the length of it is 50mm. Weighs only 14g, it is made by Aluminum Alloy, very sturdy and lightweight, easy for storage | 【ANTI-OFF DESIGN】SMALLRIG The safety pins on both side prevents your NATO accessories from accidentally sliding off | 【MOUNTING OPTIONS】It can be attached to any accessories with two 1/4-20 holes via two 1/4-20 screws (included) to provide a mount for QR handle, EVF mount, NATO clamp, and camera plate, etc | 【RECOMMENDATION】It works with items with NATO clamp, such as SmallRig NATO Clamp 1973, SmallRig Monitor Mount with NATO clamp 2100 and BSE2347, SmallRig Rotating Nato Handle HTN2362, for quick attachment and release

【NATO RAIL STANDARD】SMALLRIG BUN2483 is compatible with standard NATO accessories for quick release, such as clamps, handles and monitor holders, enabling you to quick attach and release the rig components | 【THIN & LIGHTWEIGHT】The thickness of SMALLRIG 2483 is 6mm, and the length of it is 70mm. Weighs only 17g, it is made by Aluminum Alloy, very sturdy and lightweight, easy for storage | 【ANTI-OFF DESIGN】SMALLRIG The safety pins on both side prevents your NATO accessories from accidentally sliding off | 【MOUNTING OPTIONS】It can be attached to any accessories with two 1/4-20 holes via two 1/4-20 screws (included) to provide a mount for QR handle, EVF mount, NATO clamp, and camera plate, etc | 【RECOMMENDATION】It works with items with NATO clamp, such as SmallRig NATO Clamp 1973, SmallRig Monitor Mount with NATO clamp 2100 and BSE2347, SmallRig Rotating Nato Handle HTN2362, for quick attachment and release

【NATO RAIL STANDARD】SMALLRIG BUN2484 is compatible with standard NATO accessories for quick release, such as clamps, handles and monitor holders, enabling you to quick attach and release the rig components | 【THIN & LIGHTWEIGHT】The thickness of SMALLRIG 2484 is 6mm, and the length of it is 90mm. Weighs only 21g, it is made by Aluminum Alloy, very sturdy and lightweight, easy for storage | 【ANTI-OFF DESIGN】SMALLRIG The safety pins on both side prevents your NATO accessories from accidentally sliding off | 【MOUNTING OPTIONS】It can be attached to any accessories with two 1/4-20 holes via two 1/4-20 screws (included) to provide a mount for QR handle, EVF mount, NATO clamp, and camera plate, etc | 【RECOMMENDATION】It works with items with NATO clamp, such as SmallRig NATO Clamp 1973, SmallRig Monitor Mount with NATO clamp 2100 and BSE2347, SmallRig Rotating Nato Handle HTN2362, for quick attachment and release

【STABLE &LIGHTWEIGHT】SMALLRIG Universal LWS Baseplate with Dual 15mm Rod Clamp fits mainstream DSLR and mirrorless camera cages on the market. The baseplate is locked via the screws and attach to the camera via the 1/4" or 3/8" screws. | 【15MM ROD CLAMP】It works with dual 15mm rods to attach such as accessories lens support, follow focus, and matte box during handheld shooting and tripod shooting. | 【SUPPORT TRIPOD SHOOTING】Features multiple threaded holes at the bottom, which can be attachmented with various sizes of quick release plates for tripod shooting. | 【RUBBER CUSHIONS】There built-in on the surface to prevent your camera from scratching and twisting. | 【WORK WITH CAGE 3270】This base plate can ensure 85mm optical height when used with 3270 Cage for BMPCC 6K PRO. The specially-designed bottom allow the 3270 cage replace the SSD without removing the baseplate.

▲ADJUST ALL ANGLES▲ Features a wingnut in the middle to adjust the angles and positions of monitor or video light or other accessories. It supports rotation of any angles | ▲LOCK TIGHT▲ Tightened with a wingnut quickly and conveniently. It is easy to use and can help you lock tightly. Needn’t worry about dropping | ▲NOTICE▲ Not recommend for monitor or LED light over 1.0 kg | ▲1/4 SCREWS▲Equipped with 1/4” screws at both ends. It could attach camera cage, top plate and Top Handle 1955/1984 on the one end, while attach monitor or video light on the other end | ▲SMALLER MODEL▲ This is the smaller model of SMALLRIG Magic Arm with Small Ballhead 2163. If you need a bigger one, please check the SMALLRIG 2163

【Reliable Large Wheels】The SmallRig professional tripod wheels 3986 is a camera dolly designed for mobile tripods and easy action photography. Equipped with large and highly adaptive 3-inch rubber wheels, the dolly can realize the stable movement of the tripod on smooth surfaces and shoot a smooth tracking lens, with a max payload of 33 lbs (15 kg) for optimal performance. The independent brakes ensure that the dolly stays locked in place. | 【Fits Most Tripods】Compatible with most tripods, the SmallRig 3986 clamp can extend up to 54mm/2.12" and is suitable for tripod leg diameters less than 54mm. With adjustable clamps and simple to use twist screws, this universal dolly can easily fit your tripod. Its max payload is 33 lbs (15 kg) for optimal performance. | 【Simple Adjustable Legs】Extendable legs ranging from 298mm to 435mm (11.7" to 17.1"), make the video dolly compatible with different tripods in any opening and closing angles. Non-slip flip locks ensure device security and a great user experience. | 【Easy-to-Store & Carry】Folding design. The tripod trolley is equipped with handles and carrying bag for easy transfer. Moreover, compared with most similar products, it has smaller folding space (16.9" x 5.9") and lighter weight (3.97 lbs/1.8kg), which increases great convenience. | 【SmallRig Tripod Recommendations】The camera tripod dolly is compatible with SmallRig Heavy Duty Tripod 3751, SmallRig 72" Video Tripod 3760, SmallRig 68" Tripod 3983, SmallRig 71" Tripod 3935, SmallRig Selection Camera Tripod 3474 and other standard or professional tripods.

【Wide Compatibility】The upgraded universal magnetic phone cage kit is compatible with multiple mobile phone models, and is compatible with mobile phones with a width of 2.52~3.46 inches (64mm~88mm), such as for iPhone 16 / 15 / 14 / 13 series, for Samsung Galaxy S24 / S23 / S22 series, for Huawei Mate 60 / 40 series, for Google Pixel 8 / 7 / 6 series, etc. The phone cage can fix the phone through for MagSafe magnetic suction, or through the included mobile phone clip. Supports the use of mobile phones with cases. | 【Quick-release Dual-handle Design】The dual handle solution increases the stability of dynamic shooting for video creators. The two quick-release side handles included in the kit support quick-release connection, and can be quickly switched between side handle and top handle mode through different installation methods. A hexagonal wrench for installation is placed inside the handle, which is easy to store and use whenever you want. The detachable wireless controller on the handle's top supports remote shutter release and recording, with a maximum remote control distance of up to 10m / 32.8ft. | 【Multiple Expansion Ports】The upgraded universal phone cage contains multiple 1/4-20” threaded holes, cold shoe ports and quick release interfaces, and adds expansion ports of 67mm filter, shoulder strap hole and expansion dock fixing port. Allowing users to expand a variety of professional video equipment, such as LED light 3286, microphone 3468, handles 4402, tripod 4630, phone filter ring 4843, phone filter 4726, expansion dock and shoulder strap, etc. | 【High Quality Aluminum Alloy Material】Universal QR phone cage kit is made of high quality aluminum alloy to be lightweight yet sturdier. In addition, the phone clip has built-in rubber pads to ensure that the smartphone is fixed in place and avoid scratches. | 【What You Get】The universal quick-release video kit Basic version includes: universal phone cage 4299B x 1, quick-release wireless control side handle 4402 x 1, quick-release side handle 4403 x 1, user manual x 1 and professional after-sales service. If you have any questions, please feel free to contact us.

【19-25mm Adjustable Range】Size-adjustable mount to firmly hold 19-25mm diameter microphones | 【Shockproof and Noise Reduction】 Built-in silica gel to absorb bumps and noise | 【Built-in 15mm Rod Clamp】 Built-in a 15 mm rod clamp, it can be attached to universal 15mm rod and locked via a wingnut easily | 【Related Products】Together with a 15 mm rod, it can be attached to SMALLRIG Cold Shoe Handle 2165, Top Handle 2027 | 【Package Includes】1 x Microphone Mount 1993

【HIGH CUSTOMIZATION】 Aluminium alloy inner part and wooden handle external part to provide a comfortable and lightweight handheld shooting. NOTICE: The wooden handle is made of natural rosewood without any painting. | 【UNIVERSALITY FOR BOTH SIDES】 The SmallRig NATO Side Handle allows you switch from the left to right quickly. If you want to use it on the other side of the cage, just take off the connection part of handle and change the direction. NOTE: only ONE piece in the package. | 【MOUNTING POINTS】 The NATO Side Handle features 3/8 and 1/4 threaded holes on the top for more accessories like SmallRig Magic Arm 2065/2066. A cold shoe to mount articulating arm and microphone directly. | 【UP AND DOWN ADJUSTABLE】 The Wooden grip can be adjusted up and down. The built-in Allen wrench on the top is used to adjust the handle up and down based on your needs. | 【NATO CLAMP】 The Wooden handle is locked via NATO clamp to make your setup quick release and fits any cage featuring NATO rail on side. The handle is also compatible with SmallRig NATO Rail 2172/1409 for quick-release your setup without any tools.

Compatibility: Compatible with two cables at the same time (Maximum Capacity: 2 cables with diameter of 6mm) | Install Method: The cable clamp is fixed to the cage, handle, L plate, and other accessories by 1/4" screws, and accommodate cable such as HDMI cable, microphone cable, charging cable, shutter cable, USB cable and headphone cable, etc. | Quick Installation: Designed with space on the surface, the wrench can pass through the clamp to install or remove 1/4" screws, and then quickly install or remove the clamp | Easy To Use: the spring cover is tight, and the cable can be installed by opening the cover, which is convenient and quick | Product Advantages: keep the wire tidy, prevent accidental disconnection of the signal, and protect the wire port

【Ultra Thin & Flexible】The ultra-thin and flexible high speed HDMI cable (55m/1.8ft) with 3.6mm diameter fits perfectly in tight spaces, designed for gimbal, camera stabilizer, monitor, wireless video transmitter & receiver and other devices with standard A-type HDMI interfaces to achieve high-speed signal transmission. | 【High Speed HDMI Cable】Ultra-Slim HDMI 2.0 version standard cable supports ultra HD 4K@60Hz, Full HD 1080P, 3D, Ethernet, Audio Return Channel(ARC), HDR, and you can transmit high-resolution sound formats. | 【Wide Compability】Compatible with devices with standard HDMI type A connector, including an HDTV, Computer, TV Stick, Roku, Blu-ray DVD player, PS3, PS4, and Xbox, etc.( for BMPCC 4K&6K, for Panasonic S1H/GH5/GH5S, for Z-cam E2, for Atomos Ninja V, for Hollyland Mars 400, etc.) | 【Stable Connection】SmallRig HDMI connector ensures maximum data transmission and provides pure signal transmission, reliable performance for data transfer, vivid video colors and spectacular surround sound while protecting against EMI/RFI interference. | 【What you can get】The package include 1 x HDMI cable, 1 x Cable tie and professional after-sales service. Come with a cable tie for cable management to make your rig neat. If you have any questions, please feel free to contact us.

Universal Compatibility: Embrace versatility with the standard V-mount, ensuring compatibility with a broad spectrum of V-mount batteries available in the market. Fully compatible with SmallRig V-mount battery: VB50(Asin:B0BQLV3W1F), VB99(Asin:B0B6Z9K42P), VB99 Pro(Asin:B0CLGQDFCG), VB155(Asin:B0B6ZCNF1P). | Powerful Charging Hub: Experience high-speed charging with the PD protocol-compatible USB-C (65W Max.) and QC protocol-compatible USB-A (36W Max.) ports. Additional D-Tap (14.8V x 1) and DC (8V x 1 / 12V x 2) power ports provide a comprehensive charging solution for various devices. Clear indication of working status and fast/slow charging modes through the power and charging/discharging indicator lights. | Effortless Integration: Streamline your setup with quick and hassle-free mounting onto any 15mm LWS rod system, enhancing the efficiency of your workflow. | Accessory Attachment Points: Equipped with six 1/4"-20 threaded holes, ten M4 threaded holes on the back, and five 1/4"-20 threaded holes on the top and bottom for attaching various accessories, including crab-shaped clamps, dual rod clamps, and magic arms. | Intelligent Controls and Robust Build: Take command with the user-friendly power on/off button, simultaneously controlling multiple ports for seamless operation. The aluminum alloy plate not only exudes durability but also boasts excellent heat dissipation, ensuring sustained high performance even in demanding shooting conditions.

【High Customization】SmallRig V mount battery adapter plate 3204 is designed to provide longer battery life for your camera equipment through V-mount batteries. It utilizing the standard V-port structure so that it suitable for most V mount batteries in the market. It is suitable for Sony for Canon and other DSLR cameras | 【Adjustable Arm】This V lock battery plate features an adjustable arm for quick adjustment of the V mount battery position, to get a perfect angle for your battery like vertically or hang it upside down on the rod system | 【Dual 15mm Rod Clamp】This power supply splitter comes with a dual 15mm rod clamp, lock the plate on 15 mm LWS rod system easily and quickly | 【Rich Output Ports】It comes with an 8V DC, a 14.2V D-TAP and two 12V DC ports, satisfied different requests. 5V/2A USB output port to power other external accessories like a monitor, a phone, etc. | 【Note】 Do not use in damp environment to avoid short circuit; The plate fits most V mount batteries but PAGlink series V mount batteries and Patona Premium Battery for BP-190WS | 【SmallRig V Mount Battery】SmallRig mini V-mount Battery VB50 (50Wh) and VB99 (99Wh) are now available, multi-interfaces and PD fast-charging design, widely compatibility use for cameras, camcorders, monitors, smartphones, etc. if you need a compact & sufficient power supply, please search SmallRig V Mount Battery 3579(Asin:B0B6YYCFBK), SmallRig V Mount Battery 3580(Asin:B0B6Z9K42P).

【High Customization】SmallRig V mount battery adapter plate 3499 is designed to provide longer battery life for your camera equipment through V-mount batteries. It utilizing the standard V-port structure so that it suitable for most V mount batteries in the market. It is suitable for Sony for Canon and other DSLR cameras | 【Adjustable Arm】This V lock battery plate features an adjustable arm for quick adjustment of the V mount battery position, to get a perfect angle for your battery like vertically or hang it upside down on the rod system | 【Dual 15mm Rod Clamp】This power supply splitter comes with a dual 15mm rod clamp, lock the plate on 15 mm LWS rod system easily and quickly | 【Rich Output Ports】It comes with two 14.8V D-TAP output, one 8V DC output, one 12V DC output, satisfied different requests, power external accessories like a monitor, a phone, etc. | 【Note】 Do not use in damp environment to avoid short circuit; The plate fits most V mount batteries but PAGlink series V mount batteries and Patona Premium Battery for BP-190WS | 【SmallRig V Mount Battery】SmallRig mini V-mount Battery VB50 (50Wh) and VB99 (99Wh) are now available, multi-interfaces and PD fast-charging design, widely compatibility use for cameras, camcorders, monitors, smartphones, etc. if you need a compact & sufficient power supply, please search SmallRig V Mount Battery 3579(Asin:B0B6YYCFBK), SmallRig V Mount Battery 3580(Asin:B0B6Z9K42P).

New Upgrade: Vibe P108 Pro is the 2nd-generation product in SmallRig's Vibe LED Light series. Inheriting the iconic ring-shaped metal stepless knob design, it now features an embedded LCD color screen for a clear display of parameters such as color temperature and brightness, allowing for easy single-handed adjustment. | Professional Performance: Premium 5W RGBWW Light Source with CRI > 95 and TLCI > 98, delivering 1150Lux @ 0.3m/5600K, suitable for entry-level content creators, photography enthusiasts, on-the-go live streamers, and more. | Versatile Lighting Modes: With built-in cool/warm light, HSI, and special effects modes, it can simulate 2500K-6500K daylight, 36000 color sources, and 12 special effects. Ideal for facial illumination, tabletop still life lighting, Vlogs, live streaming, creating ambiance, light painting photography, and more. | Flexible Mounting Options: With 1/4"-20 threaded holes and a cold shoe mount, for easy switching between hot shoe top-mount, handheld, or desktop tripod stand setups. Ideal for providing fill light for smartphones, cameras. Accessories for Sony, for Canon, and more. | Long-lasting Power: Built-in 1500mAh lithium polymer battery supports USB-C charging, providing up to 1.2 hours at full power and 3 hours for regular shooting. | Durable Construction: The light body features a high-strength aluminum alloy frame, anodized aluminum alloy knobs, and an ABS/PC light diffuser, ensuring durability. The soft light panel provides uniform and wide light dispersion, capturing smooth and silky soft light moments for portrait photography effortlessly. | Note: Includes a P108 Pro light, a charging cable and a user manual. Any inquiries will be responded to within 24 hours, and we offer a 1 year after-sales service. Please feel free to use them with confidence.

Vertical/ Horizontal Quick Switching: The tripod fluid head supports one-click switching from horizontal shooting to vertical shooting; just press the button below the QR plate. Quickly open and lock without removing the camera | Smooth Pan and Tilt: Built-in damping and balancing system, this video fluid head supports smooth swivel 360° and tilt +90°/-90°, realizing stable shooting from different angles | Removable Telescopic Handle: The telescopic handle can be removed and installed on the left and right sides of the fluid head, making it easy to switch and store. Rotate the handle counterclockwise to extend 112-230 mm (4.4-9.1 inches). Release the handle knob to easily adjust the handle to the desired angle | Switchable QR Plate: The quick-release plate mount can be rotated 90°; just press the button under the base to switch attachment direction. The QR Plate fits for Arca Swiss for quick switching between handheld and tripod shooting | Max load of 5 kg (11 lbs): The tripod head is designed to be compact but durable and stable, with a maximum load of 5 kg (11 lbs). The video head only weighs 0.55 g (1.21 lbs), and the base diameter is 45mm (1.77 inches), making it friendly to carry for outdoor shooting

【FOR SONY RX100 VI & RX100 VII】SMALLRIG Cage for Sony RX100 VII and RX100 VI Camera CCS2434 is designed to provide protection and accessory mounts for RX100 VII/VI users | 【REMOVABLE WOODEN SIDE HANDGRIP】An ergonomic wooden right-side handgrip provides a comfortable gripping surface. Additionally, this cage increase the space between grip and lens to ensure comfortable when holding. Please noted that if you have a AGR2 handgrip, please remove it before installing the camera in the cage. | 【MOUNTING POINTS】It features a variety of 1/4"-20 accessory threads around the cage and comes with six 1/4"-20 tripod threads on the bottom. This allows you to mount accessories such as SmallRig Top Handle 1638, Magic Arm 2070 for monitor and other camera related accessories. Also, the formfitting cage features a cold shoe on the top and right side for microphone or light which makes vlogger’s work much easier | 【BUTTON ACCESSIBLE】The cage secures around the lens mount via a M5 screw which maintains access to the battery door. Without impeding access to your camera's functions, displays, ports, or battery, the cage does not block or cover any important sections of the camera | 【LIGHTWEIGHT AND COMPACT】Made by Aluminum Alloy and Wood, it weights only 123g, very sturdy and lightweight, which will bring more comfortable shooting experience | 【Related Product】If you would like to control your camera by remote, you could search "SmallRig SR-RG1 Remote Shooting Grip 3326"

Versatile and Compact Design: SmallRig V-mount battery plate 4063B adopts L-shaped design, which integrates quick release plate for Arca-Swiss, V-mount battery plate, stretchable rod and 1/4"-20 threads to realize quick installation and adjustment of camera and battery. Through the 1/4"-20 threads connected to the dual 15mm rods and quick release chest / abdomen support system to reduce the burden and ensure more stable handheld shooting. | Stretchable Baseplate: The baseplate of this V-mount battery plate is stretchable, and the maximum stretchable distance is 36.5 mm / 1.43 inch, which meets the needs of cameras of different sizes and improves the compatibility. Locking and releasing the rod is realized by a toggle lock, which is fast and time-saving without the needs of tools. | Widely Compatibility: This V-mount battery plate is very versatile and universal, it is suitable for most camera models on the market, for Mirrorless / DSLR cameras less than 111mm thick, like for Sony Alpha 7R V / Alpha 7 IV / Alpha 7S III / Alpha 7C / FX3 / FX30, for Canon EOS R5C / R5 / R6 / R6 Mark II / R7 / R10 / R / RP, for Panasonic LUMIX S1H / S1R / S1 / S5 / S5 II / GH6 / GH5. | Double Quick Release Plate for Arca-Swiss: It comes with two QR plates for Arca, one can be mounted on the bottom of the camera or cage to give them quick release functionality. The other can be mounted on the bottom of the plate as you require it to enable quick switching among handheld, stabilizer, and tripod shooting. If you don't need a QR plate for Arca, then you can use the 1/4"-20 and 3/8"-16 threaded hole on the bottom of the plate to mount the quick release plate you need, such as for Manfrotto etc. | Smart Rotatable Design: The V-Mount plate can be rotated and adjusted by 180°. Adjust forward for convenient storage, adjust backward for enough space to open the camera flip screen. This rotating design does not require you to remove the battery first, which effectively saves time. And it also with pivot dampening preventing your device from falling. | Expand Your Creativity: This V-mount battery Plate has a mini V-mount plate with 1/4 "-20 threads, which makes this V-mounted battery plate compatible with NP-F battery adapter plate(ID:3168B) and power bank holder(ID:BUB2336), thus realizing more diversified battery solutions.

Versatile and Compact Design: SmallRig V-mount battery plate 4505 adopts L-shaped design, which integrates V-mount battery plate, stretchable rod, 1/4"-20 and 3/8"-16 threads to realize quick installation and adjustment of camera and battery. The built-in mount clamp for Arca supports any SmallRig cages with QR plate for Arca. Folding and lightweight design, only 113.5 mm x 30 mm, 199g, easy to store and carry round. | Stretchable Baseplate: The baseplate of this V-mount battery plate is stretchable, and the maximum stretchable distance is 36.5 mm / 1.43 inch, which meets the needs of cameras of different sizes and improves the compatibility. Locking and releasing the rod is realized by a toggle lock, which is fast and time-saving without the needs of tools. | Widely Compatibility: This V-mount battery plate is very versatile and universal, it is suitable for most camera models on the market, for Mirrorless / DSLR cameras less than 111mm thick, like for Sony Alpha 7R V / Alpha 7 IV / Alpha 7S III / Alpha 7C / FX3 / FX30, for Canon EOS R5C / R5 / R6 / R6 Mark II / R7 / R10 / R / RP , for Panasonic LUMIX S1H / S1R / S1 / S5 / S5 II / GH6 / GH5. | Smart Rotatable Design: The V-Mount plate can be rotated and adjusted by 180°. Adjust forward for convenient storage, adjust backward for enough space to open the camera flip screen. This rotating design does not require you to remove the battery first, which effectively saves time. And it also features pivot damping to prevent equipment from falling. | Expand Your Creativity: The Built-in 1/4"-20 and 3/8"-16 threaded holes on the bottom enable to mount the quick release plate you need, such as for Arca-Swiss and for Manfrotto etc. | NOTE: This is the Lite Version of SmallRig V-mount battery plate. Quick release plate for Arca-Swiss and mini V-mount plate are not included in the packing list.

Versatile and Compact Design: SmallRig V-mount battery plate 4064 adopts L-shaped design, which integrates quick release plate for Arca-Swiss, V-mount battery plate, stretchable rod and 1/4"-20 threads to realize quick installation and adjustment of camera and battery. Folding and lightweight design, only 117 mm x 31.5 mm, 230g, easy to store and carry round. | Stretchable Baseplate: The baseplate of this V-mount battery plate is stretchable, and the maximum stretchable distance is 36.5 mm / 1.43 inch, which meets the needs of cameras of different sizes and improves the compatibility. Locking and releasing the rod is realized by a toggle lock, which is fast and time-saving without the needs of tools. | Double Quick Release Plate for Arca-Swiss: Its bottom is equipped with a 1/4 "-20 and 3/8 "-16 quick release plate for Arca-Swiss, which can quickly switch among handheld shooting, gimbal shooting and tripod shooting. And the included quick release plate for Arca-Swiss allows the camera to be quickly connected to the kit. | Not Block Camera Screen: You can flip the V-mount battery plate down 90 degrees through the thumb lock on the side, so that you have enough space to open the camera flip screen. This rotating design does not require you to remove the battery first, which effectively saves time. And it also with pivot dampening preventing your device from falling. | Variety of Power Solution Options: This V-mount battery Plate has a mini V-mount plate with 1/4 "-20 threads, which makes this V-mounted battery plate compatible with NP-F battery adapter plate and power bank holder, thus realizing more diversified battery solutions.

【Compact and Convenient】SmallRig Aluminum Mini Tripod VT-20 4289 is the perfect mini tripod for compact DSLRs, mirrorless cameras, smartphones, action cameras and other devices. Its foldable aluminum alloy legs and center column design allow for compact storage, making it only 18cm/7 inches in length and weighing under 700g/1.5lbs. | 【Effortless Adjustments】Utilizing a 5-section leg design and a quick tightening mechanism, this mini tripod allows for quick and easy height adjustments, with a working height range of 17cm/6.7in to 52cm/20 in. | 【Versatile Shooting Angles】The travel tripod has a quick angle adjustment lever, offering three angle options (23°/50°/80°) to meet different shooting angle demands. The center column can be disassembled and installed in reverse, providing more shooting perspectives. | 【360-degree Ball Head】The ball head for Arca-swiss provides 360° panoramic movements and a 90° notch for vertical shooting scenarios, allowing you to take photos at any angle with horizontally and vertically. And it can support a maximum load of 6kg/ 13.2lbs. | 【Expandability & Package Includes】The tabletop camera tripod has a 1/4"-20 threaded hole that are compatible with accessories such as magic arms, allowing for the attachment of microphones, monitors, and other transmission devices. The package includes a tripod*1, allen wrench*1, smartphone holder*1, hook*1, and user manual*1.

New Upgrade: The upgraded wireless control side Handle 4402B offers infinite rotation, securely locking at any angle with dependable and long-lasting damping, ensuring sustained use without loosening. | Wireless Remote Control Module: The handle has a built-in wireless remote control module, which can control the start and end of taking pictures and recording with most native cameras of Android/iOS systems within a distance of 10 meters, boosting efficiency in mobile photography and videography. | One-Second Disassembly and Assembly: The quick-release adapter of the handle can be quickly connected to all SmallRig SmallRig H11 universal & dedicated quick release cages for smartphones(SMALLRIG Cage for iPhone 15 Series; for Xiaomi 14 Ultra 4733; for Samsung Galaxy S24 Ultra 4601 and Universal cage 4299 and so on), allowing you to start shooting smoothly. | Switchable between Top Handle and Side Handle: By connecting the handle adapter to the horizontal slot of the cage, the side handle can be converted into a top handle, adapting to more shooting scenarios. The hex wrench is magnetically fixed to the bottom of the handle and locked with a decorative cover, making it stable and portable. | Built-in Cold Shoe: After disassembling the wireless remote control module, the handle's built-in cold shoe can be used to connect an external microphone or LED video light, making mobile phone shooting more professional. | Comfortable Grip: The rotating side handle enhances grip comfort and stability for a range of shooting angles, greatly improving the shooting experience and efficiency

Widely Compatible Lenses: SmallRig Wireless Follow Focus Kit (Lite) 4296 is designed to provide a precise and low-latency focusing experience for video shooting. It is compatible with a wide range of cinema and zoom lenses with high damping, such as CP. 3 35mm for ZEISS, Arles 50 / 75mm F1.4 FF / VV for DZOFilm, CN-R35 T1.5 L F for Canon, FE C 16 - 35mm T3.1 G for Sony lens, etc | Peak Torque of 4.3 kgf.cm: The receiver motor adopts a variable speed gear set design, which can provide a high torque output of 4.3 kgf.cm. Compared with the previous generation product, the torque peak is increased by more than 2 times, and the response efficiency is increased by 35%, making it easy to drive the zoom lens | Up to 21H Battery Life: The handwheel is equipped with a built-in 1400mAh battery and adopts smart sleep tech for long-lasting power, which can provide about 21h of ultra long battery life. The Receiver Motor supports a wide voltage input range of 5V-18V, compatible with PD and QC fast charging protocols. Please use the provided power cord or a USB 3.0 cable to avoid insufficient torque issues | User-Friendly Design: The wireless follow focus kit uses two light colors, red and blue, to indicate the connection status and channel (blue light-F00-1; green light-F15-1), and provides intuitive operation instructions. The control is simple and efficient, making it easy for beginners to get started | One-Click Lens Calibration: The Handwheel supports one click A/B dotting, and you can adjust the appropriate A/B focal length according to your shooting needs. The kit features a memory storage function, eliminating the need to recalibrate lens travel and AB point settings in case of power loss, enhancing shooting efficiency

Low Latency and Precise Control: SmallRig Wireless Receiver Motor (Lite) 4297 is designed to provide a high torque, low latency autofocus shooting experience, and it supports cross-control with the Magic FIZ system, providing users with more options for adapting to different lenses | Peak Torque of 4.3 kgf.cm: The receiver motor adopts a variable speed gear set design, which can provide a high torque output of 4.3 kgf.cm. Compared with the previous generation product, the torque peak is increased by more than 2 times, and the response efficiency is increased by 35%, making it easy to drive the zoom lens | Streamlined Control: The Wireless Receiver Motor 4297 features red and blue indicator lights to signify connection status and channel (blue light - F00-1; green light - F15-1), offering intuitive and user-friendly operation guidance for simple and efficient control. When the Handwheel Controller and Receiver Motor lights (blue and green) match, it indicates a successful automatic connection | PD + QC Fast Charging: The receiver motor Operating within a wide voltage input range of 5V-18V and supports PD + QC fast charging protocols. Please use the provided power cord or a USB 3.0 cable to avoid insufficient torque issues | Please Note: 1. The blue light (F00-1) and green light (F15-1) can be interchanged for use with MagicFIZ Wireless Follow Focus Basic Kit (ID: 3781). 2. Prolonged high torque zooming may result in the motor surface heating up, which is a normal phenomenon. 3. In the event of abnormal motor rotation, please refer to the user manual for instructions on performing a controller reset operation. 4. A flashing red light indicates a low battery or abnormality. Please address any problems promptly

For Select Cameras: The SmallRig 3902 Wireless Remote Control for select Bluetooth enabled digital cameras for Sony, for Canon and for Nikon is a Bluetooth remote shutter release that starts and stops video recording. This reduces post-production time. | 32.8ft / 10m Range & Pairs Instantly: This wireless remote control featuring a fast and reliably Bluetooth connection that enables transmission within a 32.8ft / 10m range. Once paired, it will automatically connect the camera the next time you turn it on. | Mode Switch: SmallRig wireless remote control 3902 has STILL and MOVIE two mode. In STILL mode, press the button halfway for automatic focus and all the way down for taking pictures; In MOVIE mode, do a full press to turn on/off recording, meet different shooting scenarios. | Multiple Mounting Solutions: This wireless control comes with a detachable cold shoe clamp at the bottom to quickly mount to a cold shoe mount or your collar. Remove the clamp and it can be locked to such accessories as Side Handle 3260, Top Handle 2165C, etc. via the 1/4"-20 screw in the box. | Special Design: Its shape is ergonomically designed for added comfort and grip. Its silicone bottom helps prevent deflection, while the screw features an anti-lost design. | Wide Compability: for Sony: Alpha 7R V / Alpha 7R IV / Alpha 7R III / Alpha 7 IV / Alpha 7 III / Alpha 7S III / Alpha 7C II / Alpha 7C / Alpha 7CR / Alpha 9 II / Alpha 9 / Alpha A1 / FX3 / FX30 / Alpha 6700 / Alpha 6600 / Alpha 6100 / Alpha 6400 / ZV-E1 / ZV-E10 / ZV-E10 II ZV-1 II / ZV-1 / ZV-1F / DSC-RX100 VII; for Canon: EOS R5 / R5 II / R6 Mark II / R6 / R7 / R8 / R10 / R / RP / R50 / M6 Mark II / M50 / 90D; for Nikon: Z50 / Zfc / Z30

【HIGH CUSTOMIZATION】SmallRig Wooden Mini Side Handle 2913 is designed for the cages of mirrorless, digital camera, and other small cameras. Two 1/4"-20 screws are fixed to the side of your camera cage. SmallRig 2913 is compatible with any cages featuring two 1/4"-20 threaded holes with 18mm distance on the side, such as SmallRig Cage 2087, 2808, etc. | 【ERGONOMIC DESIGN】Made of aluminum alloy and rosewood with ergonomic design, the portable handle provides filmmakers with smooth and comfortable shooting experience. ( Note: Deviation of wood grain color and stripe is normal. ) | 【FOR RIGHT-HAND OR LEFT-HAND USE】The SMALLRIG Mini Handle 2913 supports you to switch from left-handed to right-handed quickly through the built-in wrench. If you want to use it on the other side of the cage, just take off the connection part of handle and change the direction. Besides, you could slide up and down for your optional positioning. | 【MOUNTING OPTIONS】The flash and microphone can be mounted through the cold shoe, and the wrist strap, such as 2456, can be mounted through the eyelet to prevent the camera from accidentally falling off. | 【LIGHTWEIGHT & PORTABLE】It weighs only 142g. This wooden handle serves as a mini grip, please kindly check other handles on amazon if you prefer larger ones. ( Note: The maximum bearing capacity of the handle is 3.5kg. Please do not overload. )

Compatibility: This L-shaped grip is custom-designed for FUJIFILM X100VI and X100V cameras. The handgrip is fastened using a single 1/4"-20 screw located at the bottom. It matches the texture and color scheme of the camera body, fitting seamlessly when mounted. | Ergonomic Silicone Grip: The hand grip 4555 features a built-in ergonomic silicone handle that improves grip and provides a comfortable handheld experience. Silicone material is also integrated into the bottom to prevent scratches on the camera body. | Integrated Quick Release Plate for Arca: The grip includes quick release plate for Arca at the bottom to quickly switch to tripod shooting. Four 1/4"-20 threaded holes at the bottom also support tripods and QR plates for Manfrotto, etc. | Compact and Lightweight: This grip plate features an ultra-thin design to realize a net weight of only 82g, enhancing its compactness and lightness. | Unique Features: Including a hot shoe cover engraved with Fuji's sound wave pronunciation and the founding year "1934" adds a touch of sentimental tradition unique for Fujifilm brand. Additionally, the included shutter button enhances the tactile experience of pressing the shutter. | Notice: To prevent friction between the camera and the plate, a protective silicone pad is affixed to the left side of the baseplate which Leaving a small gap to ensuring additional protection for the camera.

Designed for FUJIFILM X100VI: The X100VI cage is designed to protect the camera and provide multiple expansion interfaces to facilitate content creation. The expansion frame does not interfere with the normal use of the camera buttons, card slots, LCD screen, MCS switch, battery, etc. | Multiple Mounting Points: The cage includes multiple 1/4"-20 threaded holes, 3/8"-16 locating holes for ARRI, cold shoe mount, strap hole, etc. It is also compatible with Top Handle 3765, Microphone 3487, LED Video light 3286B, Wrist Strap 3848, etc. | Integrated Quick Release Plate for Arca: The retro cage includes a quick release plate for Arca at the bottom to quickly switch to tripod shooting. There is a built-in double-headed wrench on the bottom for easy disassembly and assembly. | Shutter Release Button and Hot Shoe Cover Included: The cage comes with the exclusive hot shoe cover imprinted with the unique sound wave design for FUJIFILM and the foundation year for FUJIFILM. It also includes a shutter release button to ensure a soft and comfortable finger touch. | Ergonomic Design: The built-in ergonomic wooden handle provides a comfortable handheld shooting experience for video creators. | Note: 1. Please remove the D-ring on the left before installing the cage. 2. Due to the hand-polished surface of each cage, there may be slight differences between products, which is normal.

Compatibility: SmallRig L-Shape Mount Plate with Silicone Handle Sliver 4875 for FUJIFILM X-M5 is designed to improve the camera grip. The handgrip is fastened using a single 1/4"-20 screw located at the bottom. It matches the texture and color scheme of the camera body, fitting seamlessly when mounted. | Ergonomic Silicone Grip: The hand grip 4875 features a built-in ergonomic silicone handle that improves grip and provides a comfortable handheld experience. Silicone material is also integrated into the bottom to prevent scratches on the camera body. | Integrated Quick Release Plate for Arca: The grip includes quick release plate for Arca at the bottom to quickly switch to tripod shooting. Four 1/4"-20 threaded holes at the bottom also support tripods and QR plates for MFT, etc. | Included Windshield with Cold Shoe Mount : Comes with a windshield with built-in cold shoe mount, which reduces wind noise by 15dB. Built-in silicone on the bottom to prevent scratching the hot shoe. | Compact and Lightweight: This grip plate features an ultra-thin design to realize a net weight of only 70g, enhancing its compactness and lightness. Featured a strap slot for the wrist strap (ID: 3848). The built-in flat wrench on the bottom for easy accessory assembly and disassembly.

Compatiblity: This l-shape Grip is customized designed for Fujifilm X T5 to provide a comfort grip that the baseplate is in the same silver surface as the camera. The xt 5 grip easily locks the camera via a 1/4"-20 D-ring thumbscrew at the bottom | Ergonomic Handgrip: The xt5 l-shape grip is equipped with ergonomically designed handgrip which made of silicone, greatly improved grip experience, comfort and non-slip | Integrates Swiss Plate for Arca: Built in quick-release plate for Arca on the bottom to quickly switch to tripod shooting (ID: BUT2664) | Lightweight and Compact: The grip features a slim and compact baseplate, only weight 79g, which is compact, light and easy to carry. Besides, a shutter button is included for a better touch | Related Products: The bottom of the grip features a strap slot for SmallRig hand strap (ID: 2926) , and 1/4"-20 holes for mounting on mini tripod (ID: 2429) | Notice:The anti-off pin of the base plate must be aligned with the hole at the bottom of the camera during installation.

For Fujifilm X-T5: This l-bracket grip is customized designed for Fujifilm X T5 to provide a comfort grip and the black surface as the camera. The xt 5 grip easily locks the camera via a 1/4"-20 D-ring thumbscrew at the bottom, no need wrench | Integrates Swiss Plate for Arca: Built in quick-release plate for Arca on the bottom to quickly switch to tripod shooting (ID: BUT2664) | Ergonomic Handgrip: The xt5 l-shape grip is equipped with ergonomically designed handgrip which made of silicone, greatly improved grip experience, comfort and non-slip | Lightweight & Compact: The grip features a slim and compact baseplate, only weight 79g (2.78oz), which is compact, light and easy to carry. Besides, a shutter button is included for a better touch | Recommend Products: The base features three 1/4"-20 holes to mount on tripod (ID: BUT2429) or plates for Manfrotto-type, a strap slot for SmallRig hand strap (ID: 3926)

Compatibility: SmallRig Cage 3858 is designed for Nikon Z 30. All-in-one all-inclusive design, fit and protect the camera, the cage has silicone cushions that prevents scratches and maintains full access to all buttons, interfaces, the flip screen, etc. | Anti-twist: The cage hold the camera tightly through a 1/4"-20 screw at the base and a side lock adapter on the right to keep the camera stable and no shaking. | Multiple Installation Points: Built-in expansion ports of various specifications, such as 1/4"-20 threaded holes, locating holes for ARRI for Top Handle HTS2756, 3765, Side Handle HSS2425, 3814, for HDMI Cable Clamp 1822; and a cold shoe mount on the top for microphone and LED light for Vlogging to achieve multi-scene shooting | Quick Switch: The base plate has a built-in quick release plate for Arca-Swiss, which can be quickly installed to an tripod for Arca and stabilizer for DJI RS 2 / RSC 2 / RS 3 / RS 3 Pro | Hinge Arm Design: A hinge arm at the battery door fits camera curve, which can not only enhance the bare metal grip, but also quickly replace the battery.

For Nikon Z 8: SmallRig Z 8 cage kit is specifically designed for Nikon Z 8. It includes a cage, an HDMI cable clamp, and a top handle to facilitate low-angle shots and protect the camera while offering a wide range of accessory mounts. | Triple Protection: The cage locks the camera via a 1/4"-20 screw, a locating screw at the bottom, and one screw on the right side to keep the camera stable. Note: Please remove the split ring on the right of the camera to install the screw on the right side. | Quick Switch: The quick-release plate for Arca-Swiss at the bottom, can be quickly installed to the tripod for Arca and stabilizer for DJI RS 2 / RSC 2 / RS 3 / RS 3 Pro, for a quick switch between gimbal and tripod shooting. The built-in magnetic wrench at the bottom is convenient for disassembly and assembly. | Ergonomic Top Handle: The top handle feels comfortable and enables easy carrying and low-angle shots. 1/4"-20 threaded holes, 3/8"-16 locating holes for ARRI, cold shoes, and NATO rails support monitor mount 2905B/2903B, microphone 3468, LED light 3286, NATO accessories. | Interface Protection: The Z 8 cable clamp can fix cables for HDMI and USB-C at the same time, and the cables are fixed with a thumbscrew to protect the interface and ensure the stability of the signal transmission. The cable clamp can be quickly assembled and disassembled without tools. | Multiple Mounting Points: The cage kit has multiple 1/4"-20 holes and 3/8"-16 locating holes for ARRI, which can attach side handle 2093; the side 1/4"-20 locating hole can suit single rod clamp 3598 for follow focus 3850; the left NATO rail quickly connects side handle 4017.

For Nikon Z f - SmallRig Z f Cage 4261 is specifically designed to provide protection for Nikon Z f camera, while also offering enhanced grip and the ability to attach additional accessories, features a convenient dial control on the top for easy access and a familiar camera experience. | Better Handgrip - This cage 4261 comes with an ebony handle, which has been carefully designed to ensure a comfortable and secure grip on the camera. This handle adds to the overall user experience and makes handheld shooting more comfortable. | All-Round Protection - It securely locks the camera via a 1/4"-20 screw on the bottom and an M2.5 screw on the right side, while also featuring rubber pads to prevent scratches, and maintains full access to all the camera's buttons, card slots, flip screen, and battery door. | Integrated Plate for Arca - Integrated quick release plate for Arca-Swiss allows for fast and effortless switching between handheld shooting, tripod setups, or gimbal usage for DJI RS mini. Recommended SmallRig Tabletop Tripod BUT2664 for vlogging. | Multiple Mounting Points - Z f Cage 4261 features a 1/4"-20 threaded hole for attaching the Side Handle 4015, an 3/8"-16 locating hole for ARRI for the Top Handle 3765/ Monitor Mount 2903B, a cold shoe for attaching an LED Video Light 3286B, as well as strap holes for the Hand Strap 3848 and QD mounts for a Shoulder Strap 4118 | NOTE: 1. Please remove the strap ring on the right side of the camera before installing this cage. 2. The ebony handle of the cage may have grain and color different from those in the picture.

COMPATIBILITY: SmallRig L-Shape Grip for Nikon Z fc Camera 3480 is designed to provide a comfort grip. The retro-style handle shares similar texture and color with the camera; the baseplate shares the same silver surface treatment with the camera and fits perfectly | VERTICAL SHOOTING: The L grip secures to the camera via a 1/4"-20 D-ring screw on the bottom and comes with a built-in 1/4"-20 threaded hole on the grip that enables vertical shooting on a tripod | TRIPOD SHOOTING: The baseplate features a built-in plate for Arca Swiss to quickly switch to tripod shooting, and a 1/4"-20 threaded hole at the center that supports tripod or quick release plate for Manfrotto | EXPANSION INTERFACE: The baseplate features a built-in cold shoe allows attaching microphone, light and other accessories | LIGHTWEIGHT DESIGN: The bottom plate of the handle adopts an ultra-thin design, and the net weight of the product is only 74g, which is compact, light and easy to carry

Compatibility: This retro-style Z fc handgrip is custom designed for the Nikon Z fc, and equipped with an ergonomic handgrip to provide a comfortable grip. The L grip secures to the camera via a 1/4"-20 D-ring screw on the bottom; no need for the wrench | Integrates Swiss Plate for Arca: Built-in quick-release plate for Arca on the bottom to quickly switch to tripod shooting (ID: BUT2664) | Vertical Shooting: The L grip has a built-in 1/4"-20 threaded hole on the grip that enables vertical shooting on a tripod | Lightweight and Compact: The zfc grip features a slim and compact baseplate, overall weight of only 74 g (2.61 oz), which is compact, light, and easy to carry for outdoor shooting | Expansion Accessories: Built-in 1/4"-20 threaded hole at the bottom that supports a tripod (ID: BUT2429) or quick release plate for Manfrotto, cold shoe for attaching microphone, light, etc. A strap slot for wrist strap (ID: 3848/PAC2456B)

For Nikon Z50 II: Designed specifically for the Nikon Z50 II, this cage offers a seamless fit that provides unobstructed access to camera buttons and interfaces, enhancing your shooting experience. It delivers comprehensive protection and multiple expansion options for your camera. Note: The top section of the cage may obstruct the use of the camera's built-in flash, preventing it from popping up | Three-Point Locking: The cage securely fastens the camera using a 1/4"-20 screw at the bottom and locating blocks on both sides. It features built-in silicone padding to prevent scratches on the camera. The three-point locking system allows for cage mounting without the need to remove the D-ring, effectively preventing any shifting | Quick Switch Design: Quick release plate for Arca at the bottom supports tripod and stabilizer setups (compatible with RS 2, RSC 2, RS 3, RS 3 Pro, RS 4, and RS 4 Pro), enabling quick transitions between handheld, tripod, and stabilizer shooting. Additionally, a dual-head wrench at the bottom facilitates easy assembly and disassembly | Multiple Mounting Points: Built-in 1/4"-20 threaded holes, 1/4"-20 locating holes, and 3/8"-16 locating holes for ARRI, NATO rail, dual cold shoe mounts, QD ports, and strap holes can connect to top handles (ID 3765), magic arms (ID 3874), monitor supports (ID 2903B), and other accessories, making it suitable for various shooting scenarios | Protective Accessories: Comes with a reliable, scratch-resistant tempered glass screen protector rated at 9H hardness and IK03 impact resistance. Note: The screen protector is intentionally designed slightly smaller than the screen edges to prevent dust from entering through larger gaps

For Nikon Z6 III - SmallRig Z6III cage is a full cage specifically designed for Nikon Z6III. It is a full cage design that protects the camera without obstructing its interfaces and provides protective housing and versatile expansion options for a camera. | Anti-Twist Locking Design - Three-point locking system ensures stability and prevents twisting by securing the camera with one 1/4"-20 screw at the base and two M2.5 screws on the sides. Note: Please remove the split D-ring on the camera to install the cage. | Quick Switch - The quick-release plate for Arca-Swiss at the bottom, can be quickly installed to the tripod for Arca or stabilizer for DJI RS 2 / RSC 2 / RS 3 / RS 3 Pro/ RS 4 / RS 4 Pro, for a quick switch between gimbal and tripod shooting. The built-in magnetic wrench at the bottom is convenient for disassembly and assembly. | Multiple Mounting Points - This Z6 III Cage has multiple 1/4"-20 holes and 3/8"-16 locating holes for ARRI, which can attach top handle 3765 and side handle 2093, the left NATO rail quickly connects side handle 4017. Besides, there are cold shoe mounts for the SSD mount bracket 2343 or LED video light 3286B. | QD Socket & Wrist Strap Hole - Built-in multiple wrist strap holes, which are compatible with Hand Strap 3848 & 2456, the bottom QD socket can attach the QD strap buckle.

For Nikon Z6 III - SmallRig Z6III cage kit is a full cage specifically designed for Nikon Z6III. It includes a cage, a cable clamp, and a top handle to facilitate low-angle shots and protect the camera, also provides versatile expansion options for a camera. | Anti-Twist Locking Design - Three-point locking system ensures stability and prevents twisting by securing the camera with one 1/4"-20 screw at the base and two M2.5 screws on the sides. Note: Please remove the split D-ring on the camera to install the cage. | With a Top Handle- This top handle provides a comfortable grip and is easy to carry for smooth and low-level shooting, it also has 1/4"-20 threaded holes for magic arm 3873, 3/8"-16 locating holes for ARRI for monitor mount 2903B, cold shoes for LED video light 3286B, and NATO rail to expand your devices. | Quick Switch - The quick-release plate for Arca-Swiss at the bottom, can be quickly installed to the tripod for Arca or stabilizer for DJI RS 2 / RSC 2 / RS 3 / RS 3 Pro/ RS 4 / RS 4 Pro, for a quick switch between gimbal and tripod shooting. The built-in magnetic wrench at the bottom is convenient for disassembly and assembly. | Multiple Mounting Points - This Z6 III Cage has multiple 1/4"-20 holes and 3/8"-16 locating holes for ARRI, which can attach top handle 3765 and side handle 2093, the left NATO rail quickly connects side handle 4017. Besides, there are cold shoe mounts for the SSD mount bracket 2343 or LED video light 3286B.