【PCI-E 1X to 16X Riser Card】: VER010-X version, high-performance PCI Express riser card can expand the motherboard PCIE X1 slot to PCIE X16 slot. It will provide safe and reliable connections with more PCIE X16 graphics cards. Mainly designed for Ethereum/Bitcoin mining equipment or more GPU mining equipment. | 【Multi-interface】: 6PIN+4PIN+SATA15PIN interface to enhance the power supply capacity, so that the power supply of the graphics card is independent of the motherboard, thereby reducing the burden on the connection between the motherboard and multiple graphics cards. | 【More Stable and Safer】The graphics card power supply uses 8 solid capacitors to make the graphics card power supply more stable and safe.⚡At the same time used with (ASIN:B094FRYRB3)can provide fast data transmission speed. | 【Rugged Cable】: The PCI-E connector uses multi-layer shielded wire, which can be connected to up to 3M without signal attenuation. The 60CM USB cable is soft and stable, and the graphics card can be placed at will. | 【Support System】: compatible with all WINDOWS systems, LINUX, MAC.

【PCI-E1X to 16X extension cable】: new design, 1X-16X can be used, the circuit board PCIe adapter cable is newly released, safer, more efficient and more practical! | 【Stable and safe】: The graphics card power supply adopts 8 imported large solid capacitors to make the graphics card power supply more stable and safe. | 【Reduce the burden on the motherboard】: the adapter card’s 6PIN interface enhances the power supply, and it can be converted to a SATA port with a SATA to 6PIN line to make the graphics card’s power supply independent from the motherboard, thereby reducing the burden on the motherboard when multiple graphics cards are connected. | 【Rugged cable】: 60 cm USB 3.0 cable for flexible placement of PCI-E devices. The PCI-E connector uses multi-layer shielded wire, which can be connected up to 3M without signal attenuation. | 【Support system】: compatible with all WINDOWS systems, LINUX, MAC

Voice coil 1.5" (37.6 mm) edgewound aluminium ribbon. | Great power handling: 25 w RMS / High Sensitivity: 105 dB | Frequency range: 3.5 - 20 kHz / Recommended crossover: 5 kHz or higher | Impedance: 8 ohms. Minimum impedance: 8 ohms.@ 9 kHz D.C. Resistance: 6.1 ohms. | Sensitivity: 105 dB / 1w @ 1m.

【Package includes】: 7-Pack Replacement for Brother P-Touch M Tape Refill Label Maker 12mm 0.47, M-K231s MK-431 MK-531 MK-631 MK-731 MK-831 M-931s Color: Black on Silver/Gold/Blue/Green/Red/Yellow/White. Width: 1/2" (12mm). Length: 26.2' (8m) | 【M Tape 12mm 0.47 Colored】:Split backing for easy peeling. No sticky residue remains when the labels are removed. | 【P Touch M Tape Refill】: Indoor or outdoor labels,These Laminated label tapes are Water Resistant, Grime Resistant, Grease Resistant, Temperature Resistant, Abrasion Resistant, Chemical Resistant as well as Fading Resistant. | 【M Tape Wide Applications】-Use ▶ Item Differentiation, Date Labeling, Operation Tips, Price Labeling, Personal Items Labeling, DIY Blessing Language and more.-Scene ▶ Home, Office, School, Hospital, Government, Hotel, Restaurant, Factory, Bank, Laboratory, Warehouse, Farm, Repair Shop，Stores, Supermarkets and more. | 【Compatible with Brother P-touch Label Maker】:M Tape for Brother Label Maker PT-M95, PTM95, PT-70BM, PT-65, PT-45, PT-90, PT-80, PT-85, PT-70, PT-45M, PT-55BM, PT-55S, PT-65SB, PT-65SCCP, PT-65SL, PT-65VP, PT-70BBVP, PT-70BMH, PT-70HK, PT-70HOL, PT-70HOT, PT-70SP, PT-70SR, PT-80SCCP and more.

Package includes: 3-Pack Replacement for Brother M131 M-131, Color: Black Print on Clear. Width: 1/2" (12mm). Length: 26.2' (8m) | 【M Tape Features】- 1.MK131 Tapes are Split Backing for Easy Peeling. 2.Prints Clearly and No Sticky Residue when the Label is Removed.. | Compatible - Please note that the M label tape is NOT equivalent to Brother P-touch TZe label tape. The M tape is fully compatible with following Brother P-touch Label Makers: PT-45M, PT-55BM, PT-55S, PT-65, PT-65SB, PT-65SCCP, PT-65SL, PT-65VP, PT-70, PT-70BBVP, PT-70BM, PT-70BMH, PT-70HK, PT-70HOL, PT-70HOT, PT-70SP, PT-70SR, PT-80, PT-80SCCP, PT-85, PT-90, PT-M95, PT-100, PT-110 | 【Application】- Compatible with Brother Label Maker Tape 12mm 0.47 White M-K131 are Suitable for indoor use and Widely used in Home, Office, Shop, Labs, Warehouse, etc. | Money-saving Tip - To save label tape,you could print all texts you need in one long label, then cut the long label into individual labels.

【TZe-241 Package includes】: 4-Pack Replacement for Brother P-Touch Label Maker Tape 18mm 0.7 White, Color: Black Print on White Tape. Width: 3/4" (18mm). Length: 26.2' (8m) | 【TZ Tape 18mm 0.7 Laminated White 】:Split backing for easy peeling. No sticky residue remains when the labels are removed. | 【P-Touch Label Maker Tape 18mm 】:Durable Indoor or outdoor labels,These Laminated label tapes are Water Resistant, Grime Resistant, Grease Resistant, Temperature Resistant, Abrasion Resistant, Chemical Resistant as well as Fading Resistant. | 【18mm Label Tape Work with Brother Label Maker】PTD400, PT-D410, PT-D460BT, PT-1300, PT-1400, PT-1500, PT-1500PC, PT-1600, PT-1700, PT-170K, PT-1750, PT-1800, PT-1810, PT-1830, PT-1830C, PT-1830SC, PT-1830VP, PT-1880C, PT-1880SC, PT-1880W, PT-1890C, PT-1890SC, PT-1890W, PT-18R, PT-18RKT, PT-1900, PT-1910, PT-1950, PT-1960, ST-1150, ST-1150DX PT-2030, PT-2030AD, PT-2030VP, PT-2100, PT-2110, PT-2200, PT-2210, PT-2300, PT-2310, PT-2400, PT-2410, PT-2430PC, PT-2500PC, PT-2600, PT-2610, PT-2700, PT-2710, PT-2730, PT-2730VP, PT-300, PT-300B, PT-310, PT-310B, PT-320, PT-330, PT-340, PT-350, PT-3600, PT-E300,PT-H300, PT-H300LI | 【TZe-241 Tape Work with Brother Label Maker】: PT-D400,PT-D450,PT-4000,PT-D400AD, PT-D400VP,PT-520, PT-530, PT-540, PT-550, PT-580C, PT-E500, PT-E550W, PT-H500LI, ST-5 ,PT-D600, PT-D600VP, PT-P700, PT-P750W, PT-P750WVP, PT-7500, PT-7600,PT-P900W, PT-P950NW, PT-9200DX, PT-9200PC, PT-9400, PT-9500PC, PT-9600, PT-9700PC, PT-9800PCN and more

【Package includes】: 6-Pack M-K231 M231 M-K231S MK231 M-231 Replacement for Brother P-Touch M Tape 12mm 0.47 White, Color: Black Print on White Tape. Width: 1/2" (12mm). Length: 26.2' (8m) | 【M Tape for Brother Label Maker】: Indoor or outdoor labels,These label tapes are Water Resistant, Grime Resistant, Grease Resistant, Temperature Resistant, Abrasion Resistant, Chemical Resistant as well as Fading Resistant. | 【M Tape 12mm 0.47 White 】:Split backing for easy peeling. No sticky residue remains when the labels are removed.Increase efficiency by 30%, reduce the probability of error by 15%, a good partner in life and work. | 【Compatible with Brother P-touch Label Maker】: PT-M95, PTM95, PT-70BM, PT-65, PT-45, PT-90, PT-80, PT-85, PT-70, PT-45M, PT-55BM, PT-55S, PT-65SB, PT-65SCCP, PT-65SL, PT-65VP, PT-70BBVP, PT-70BMH, PT-70HK, PT-70HOL, PT-70HOT, PT-70SP, PT-70SR, PT-80SCCP and more. | Applications: Non-laminated M231 label tape is suitable for indoor applications and ideal for flat and dry surfaces, including in homes, offices, schools, labs and hospitals, for labeling files, folders, shelves, books, cabinets, accessories, etc.

【Package Included】: 5 Pack Compatible with Dymo D1 Label Tape Dymo 45013 S0720530.Color: Black Text Print on White Background.Size：Width: 1/2 inch (12mm) each. Length: 23 feet (7m) each. | 【Easy to Peel】: Compatible for DYMO D1 Label Maker Refill Tapes are Print Clearly.Split Backing for Easy Peeling. No Sticky Residue Remains when the Labels are Removed. | 【Feature】: With Dymo Label Maker Refills D1 45013 Tapes are Water Resistant, Chemical Resistant, Abrasion Resistant, Temperature Resistant, Fade Resistant.Perfect for Indoor and Outdoor Use. | 【Wide Applicability】: Compatible with Dymo Label Maker Refills D1 12mm x 3m Tape Suitable for indoor and outdoor use,such as warehouse, chemistry laboratory, schools, labs, hotels,hospitals,ect. | 【Compatible with DYMO D1 Label Makers】: DYMO LabelManager 160, PnP, 210D, 220P, 260P, 280, 360D, 420P, 450D, 500TS, 100, 150, PC II, DYMO LabelPoint 100, DYMO LabelPoint 150, DYMO LabelPoint 350, DYMO LabelWriter 400 Duo, DYMO LabelWriter 450 Duo, etc.

【Simple one-button switch to shift between transmitter(TX) and receiver(RX) mode】 TX Mode: Plug into your Non-Bluetooth device and pair up your Bluetooth speaker or headset. RX Mode: Plug into your Non-Bluetooth speaker and pair up your Bluetooth phone or MP3 player. | 【Bluetooth-enable all 3.5mm media devices】enable Bluetooth receiving: speakers, headphones and more; enable Bluetooth transmission for: MP3, MP4, CD / DVD players, e-readers, TVs, Computers, PC and more. | 【Built in battery for portable use】Battery life for TX mode: about 8 hours; battery life for RX mode: about 6 hours. Charging time:1-2 hours. | 【Bluetooth V3.0 】Support profile: A2DP and AVRCP, stereo stream output, transmission distance range to 10 meters( about 33 feet). | 【Specially Note: Don't change the modes directly 】 If you wanna change the device between transmitter mode and receiver mode, please turn off the device first, then change it to another mode. And restart it again. (The detail operate please refer to the user manual.)

A-00009441 Projector Remote Control Fit for Viewsonic Projector:PJD5132 PJD5134 PJD5232L PJD5234L PJD5533W PJD6235 PJD6245 PJD6543W PJD7820HD PJD7822HDL PJD5126 PJD5226 PJD5226W PJD6223 PJD6353 PJD6653W PJD6353S PJD6653WS PJD5232 PJD5234 PJD5453s PJD5483s PJD6345 PJD6544W PJD7223 PJD6243 PRO6200 VS14926 VS14929 VS14928 VS14930 VS14117 VS14931 VS14933 VS14934 VS14937 VS16000 VS14295 VS14551 VS14552 VS14191 VS14555 VS14554 VS14968 VS14969 VS15084 VS15083 VS14971 VS14973 VS15115 VS14425 VS13870 | No setting required:We sold is replacement infrared remote control,Light and fully functional,Easy to use,Plug in a new alkaline battery and it works well.Note:(batteries are not included) | Remote Distance:Farther transmitting distance,stable performance,and fastest response in 8 meters and also available about 10 meters.Perfect solution to replace old or broken remote | Easy to grip: The lightweight and ergonomic design makes it easy to grip .The buttons of the remote control have good elasticity,it is sufficient to lightly press the button,it works perfectly | After-Sales Service:We only list the models we know,if you can't find your model or you receive the remote control that doesn't work,please contact us via email,and our customer service staff will give you a satisfactory solution within 24 hours,thank you!

New AXD7586 Replace Remote Control Fit for Pioneer Audio Receiver System：VSX520K VSX520 SX-LX50 VSX-520-S VSX-53 VSX-1121 VSX-D514-S VSX-31 VSX-LX50 | No setting required:We sold is replacement infrared remote control,Light and fully functional,Easy to use,Plug in a new alkaline battery and it works well.Note:(batteries are not included) | Remote Distance:Farther transmitting distance,stable performance,and fastest response in 8 meters and also available about 10 meters.Perfect solution to replace old or broken remote | Easy to grip: The lightweight and ergonomic design makes it easy to grip .The buttons of the remote control have good elasticity,it is sufficient to lightly press the button,it works perfectly | After-Sales Service:We only list the models we know,if you can't find your model or you receive the remote control that doesn't work,please contact us via email,and our customer service staff will give you a satisfactory solution within 24 hours,thank you!

RD-469E Projector Remote Control Fit for NEC NP-M322H NP-M402H NP-M402WG NP-M403WG NP-ME301W NP-ME301X NP-ME331W NP-ME331X NP-ME361W NP-ME361X NP-ME401W NP-ME401X NP-U321Hi NP-U321H-WK NP-UM301Wi NP-UM301Xi NP-UM351Wi-WK NP-UM351W-WK NP-UM352W NP-UM352W-WK NP-UM361Xi-WK NP-UM361X-WK NP-PA622X NP-M323W NP-M322W NP-PA621U NP-M333XS NP-M352WS NP-PA521U NP-M353WS NP-M302WS V302W V332X V332W V302H U321H UM301W NP-V332W NP-UM361X NP-V302X NP-UM351W NP-V302W NP-V302H NP-M403X NP-M402W NP-P502HL | PX803UL NP-PX651X NP-PH1002HL NP-PX581 NP-PX602UL NP-U321H NP-UM301X NP-V332X NP-PX602WL NP-UM301W M402W M362W M322W M402X M362X M322X M282X M352WS M302WS M332XS M403W M363W M323W M403X M363X M323X M283X M353WS M303WS M333XS M403H M323H M322H M402H ME401X ME361X ME331X ME301W ME401W ME361W ME331W ME301X P452H P502H P502W P452W UM351W UM361X UM301X M402WG M403WG MC302X MC302XG MC332W MC332WG MC342X MC342XG MC372X MC372XG MC382W MC382WG MC422X MC422XG ME342U ME342UG ME372W ME372WG ME382U ME382UG | NP-PA622U NP-M363X NP-M362W NP-P502WL NP-PA522U NP-M323X NP-M402X NP-P502H NP-PA672W NP-M283X NP-M362X NP-P502W NP-PA572W NP-M403W NP-M322X NP-P452H NP-PA722X NP-M363W NP-M282X NP-P452W NP-PA671W NP-M303WS NP-M332XS NP-PA571W NP-M403H NP-PA721X NP-M323H NP-PA621X NP-M353HS NP-M323HS NP-M303HS NP-PH1202HL NP-P502WL P502WL-2 P525UL P525WL P554U P554W P603X P604X P605UL PE505XL U321Hi U321H-WK UM301Wi UM301Xi UM351Wi-WK UM351W-WK UM352W UM352W-WK ME402X ME402XG P474U P474W P502HL P502HL-2 | No setting required:We sold is replacement infrared remote control,Light and fully functional,Easy to use,Plug in a new alkaline battery and it works well.Note:(batteries are not included) | After-Sales Service:We only list the models we know,if you can't find your model or you receive the remote control that doesn't work,please contact us via email,and our customer service staff will give you a satisfactory solution within 24 hours,thank you!

New Air Conditioner Remote Control Fit for Carrier Split Air Conditioner 918F FRL10 Remote Controller | No setting required:We sold is replacement infrared remote control,Light and fully functional,Easy to use,Plug in a new alkaline battery and it works well.Note:(batteries are not included) | Remote Distance:Farther transmitting distance,stable performance,and fastest response in 8 meters and also available about 10 meters.Perfect solution to replace old or broken remote | Easy to grip: The lightweight and ergonomic design makes it easy to grip .The buttons of the remote control have good elasticity,it is sufficient to lightly press the button,it works perfectly | After-Sales Service:We only list the models we know,if you can't find your model or you receive the remote control that doesn't work,please contact us via email,and our customer service staff will give you a satisfactory solution within 24 hours,thank you!

RMT-DSLR2 Replaced Remote fit for Sony Interchangeable Lens Digital Cameras: NEX Alpha SLT Digital Cameras;ILCA-99M2 ILCE-7RM2 ILCE-7M2 ILCE-7M2K ILCE-7S ILCE-6000 ILCE-6000L ILCE-6000Y ILCE-7 ILCE-7K ILCE-7R NEX-5T NEX-5TL NEX-5R NEX-6 ILCA-77M2 ILCA-77M2M ILCA-77M2Q SLT-A99 SLT-A99V ILCE-7RM3 ILCE-9 ILCE-6500 ILCE-6300 ILCE-6300L ILCE-7SM2 A6400 A9 A7RIII A7III A7RII A7SII A7II A7RM3 A7M3 A7RM2 A7SM2 A7M2 A7R A7S A7 A6500 A6300 A6000 A99M2 A77M2 A7R3 ILCE-7M3 ILCE-7M3K ILCE-6500M ILCE-6300M | NEX-5N NEX-5NK NEX-7 NEX-7K NEX-5A SLT-A57 SLT-A57K SLT-A65V SLT-A65VK SLT-A65VL SLT-A77V DSLR-A560 DSLR-A560L DSLR-A580 SLT-A33 SLT-A33L SLT-A55V DSLR-A290L DSLR-A390L DSLR-A500 DSLR-A500L DSLR-A550 DSLR-A850 DSLR-A230L DSLR-A330L DSLR-A380L DSLR-A900 DSLR-A700 ILCE-6400 ILCE-6400L ILCE-6400M DSLR-A230 DSLR-A330 DSLR-A380 ILCE-6400Y ILCE ILCE-7RM4 NEX-5TY SLT-A SLT-A65VX SLT-A65VY A99 DSLR-A290 DSLR-A99 | No setting required:We sold is replacement infrared remote control,Light and fully functional,Easy to use,Plug in a new alkaline battery and it works well.Note:(batteries are not included) | Remote Distance:Farther transmitting distance,stable performance,and fastest response in 8 meters and also available about 10 meters.Perfect solution to replace old or broken remote | After-Sales Service:We only list the models we know,if you can't find your model or you receive the remote control that doesn't work,please contact us via email,and our customer service staff will give you a satisfactory solution within 24 hours,thank you!

New STV381A Replace Projector Remote Control Work For Vankyo Leisure 470 D70T D70Q V630W MINI LCD LED Portable Projector | No setting required:We sold is replacement infrared remote control,Light and fully functional,Easy to use,Plug in a new alkaline battery and it works well.Note:(batteries are not included) | Remote Distance:Farther transmitting distance,stable performance,and fastest response in 8 meters and also available about 10 meters.Perfect solution to replace old or broken remote | Easy to grip: The lightweight and ergonomic design makes it easy to grip .The buttons of the remote control have good elasticity,it is sufficient to lightly press the button,it works perfectly | After-Sales Service:We only list the models we know,if you can't find your model or you receive the remote control that doesn't work,please contact us via email,and our customer service staff will give you a satisfactory solution within 24 hours,thank you!

Package include 5 PCS caddy cover With screws | Compatible with laptop:DELL LATITUDE E6440 | Replace your cracked, faulty or damaged HDD caddy cover with a fine quality new one.

Package included:100pcs computer screws | Specifications: M3*5 | Color:Black zinc | Head shape: round head with the pad

Package include:Package includes: 12 * Bottom screws , 1 * T5 Screwdriver | Replacement Models for Dell XPS 13 9343 9350 9360 9370 9380 7390 9300 9305 | Replacement Models for Dell XPS 15 7590 9510 9530 9550 9560 9570 9575(2-in1) | Replacement Models for Dell Precision M3800 M5510 M5520 M5530 5530 2-in-1 M5540 M5550 | Broken screws or damaged lost while repairing replace with new one

They only use for 3.5'' hard drive ,Package include 8 pcs screws | Screw cap 0.6 cm thick,screw foot 0.5 cm, a total length of about 1.1 cm | Compatiable Model: HP 6000 6005 6200 6300, Pro 8000 8100 8200 8300 Elite DC7800 DC7900 DC5800 hard driver, Workstation Z400 Z200 Z210 Z600 450712-001 | Screw with the hard drive isolation grommets. | Hexagonalscrew for HP 3.5 inch hard drive,HP Main box screw

Fit for: 2.5" HDD; Thread Size: M3 x 5mm(D*L); Total Length: 5mm/0.2" | Thread Pitch: 0.5mm; Fit for: 2.5" HDD | Screw Head diameter: 5.0mm / 0.2" | Weight: 82g，Package Content: 100(+/-2%)pcs x Hard Drive Screw

Thread Size: 6#(3.5mm); Total Length: 6mm/0.24"; | Coating: Black Zinc Plated; Drive Type: Phillips | Fit for: 3.5" HDD; Thread Count: 32

Package includes 1 Set Trackpad Gaskets + Screws | Repalcement Models for : MacBook Pro Retina 13" A1706 A1708, 15" A1707 2016 2017 | Repalcement Models for: MacBook Air 13" Retina A1932 2018 2019 | Repalcement APN: 923-01459, 923-01471

Package includes 10 pcs Bottom case screws + 1 PCS T5 Screwdriver | specifications: M2.5X4.0 mm , Torx T5, Silver | Replacement for Models: Dell XPS 17 9700 9710 9720 9730 laptop | Replacement for Models: Dell Precision 17 5750 5760 5770 5780 | Broken screws or damaged lost while repairing replace with new one

Package includes: Screws x 10; Pentalobe Screwdriver x 1 | Compatible for : MacBook Air Retina 13" A1932 2018 - 2020, MVFH2xx/A, MVFJ2xx/A, MVFK2xx/A, MVFL2xx/A, MVFM2xx/A, MVFN2xx/A, MVH62xx/A, MVH82xx/A , MRE82xx/A, MREA2xx/A, MREE2xx/A, MRE92xx/A, MREC2xx/A, MREF2xx/A, MUQT2xx/A, MUQU2xx/A, MUQV2xx/A | Compatible For:MacBook Air retina 13" A2179 2020 Year, "MWTJ2LL/A* " "MVH22LL/A* " | Compatible For:MacBook Air retina 13" A2337 2020 (EMC 3598), MGN63LL/A, MGN73LL/A | Broken screws or damaged lost while repairing replace with new one

Package inlucde: 6Pcs Bottom case screw+1 pcs screwsdriver | Replacement Models for: MacBook Pro Retina 16” A2141 MVVJ2LL/A MVVK2LL/A EMC 3347 2019

Package includes: 8 PCS/SET Bottom Case Screws + 1 PCS 5 Point Pentalobe Screwdriver | Replacement Models For:Macbook Pro M1 Pro Max Retina 14.2'' A2442 laptop 2021 Year | Replacement Sub Machines For: Replacement Sub Machines For: 2021 Year Macbook Pro M1 Pro Max Retina 14.2''-- Space Gray (MKGP3LL/A MKGQ3LL/A) | Replacement Sub Machines For: 2021 Year Macbook Pro M1 Pro Max Retina 16.2'' -- Space Gray M1 Pro ( MK193LL/A MK183LL/A ), Space Gray M1 MAX ( MK1A3LL/A ) | Use for Broken screws or damaged lost while repairing replace with new one

Package includes 8 PCS/SET Bottom Case Screws +1 PCS 5 Point Pentalobe Screwdriver | Replacement Models For: Macbook Pro M1 Pro Max Retina 14'' A2442, 16.2'' A2485 laptop 2021 Year | Replacement Sub Machines For: 2021 Year Macbook Pro M1 Pro Max Retina 14.2''-- Space Gray (MKGP3LL/A MKGQ3LL/A) | Replacement Sub Machines For: 2021 Year Macbook Pro M1 Pro Max Retina 16.2'' -- Space Gray M1 Pro ( MK193LL/A MK183LL/A ), Space Gray M1 MAX ( MK1A3LL/A ) | Replacement Models For: Macbook Pro 14" M2 Pro/Max A2779 MPHE3LL/A* MPHF3LL/A* MPHG3LL/A* BTO/CTO* (EMC 8102*) 2023 Year | Replacement Models For: MacBook Pro 16'' M2 Pro/Max A2780 MNW83LL/A* MNWA3LL/A* (EMC 8103*)2023 Year | Replacement Models For: Macbook pro 14'' M3 Pro/Max A2992 MRX33LL/A* MRX43LL/A* MRX53LL/A* BTO/CTO* (EMC 8407*) | Replacement Models For: Macbook pro 16'' M3 Pro/Max A2991 MRW13LL/A* MRW33LL/A* MUW63LL/A* (EMC 8408) | Replacement Models For: MacBook Pro M3 8 CPU/10 GPU 14" MTL73LL/A* A2918 (EMC 8304*) | Broken screws or damaged lost while repairing replace with new one

These are only Key-caps,not full keyboard,not include white clip hinges | ✔️✔️✔️✔️✔️Please Confirm your Keyboard is AP08 or AP11 version according to our picture.As these keyboards are made by two different factories,there are two completely different Keycap and hinge structures. This listing is AP11 version keycap (Not Applicable for AP08 ). If you buy it wrong, it won't replace your keycap correctly. | ✔️✔️✔️✔️(Only Letter and Number Keys can use for Macbook Air 11-inch A1370/A1465 2010-2013 keyboards); ✔️✔️✔️✔️ ( Function Arrow UP/DOWN DELET TAB CAPS LOCK SHIFT CTRL... Keys are not suitable for Macbook Air 11-inch A1370/A1465 2010-2013 keyboards) | ✔️Replacement for Models: 2011-2017 Year Apple 13-inch Macbook AIR A1369 ( MC965LL/A MC966LL/A MD226LL/A), A1466 ( MD231LL/A MD232LL/A MD232LL/A MD760LL/A MD761LL/A MD761LL/A MD760LL/B MD761LL/B MD761LL/B MJVE2LL/A MJVG2LL/A ) keyboard | ✔️Replacement for Models: 2012-2015 Years Apple MacBook Pro Retina 13-inch A1425 ( MD212LL/A MD213LL/A ME662LL/A ), A1502 ( ME864LL/A ME866LL/A MGX72LL/A MGX92LL/A MF839LL/A MF841LL/A MF843LL/A ) | ✔️Replacement for Models: 2013- 2015 Years Apple MacBook Pro Retina 15-inch A1398 ( MC975LL/A MC976LL/A MD831LL/A ME665LL/A ME664LL/A ME293LL/A MGXA2LL/A ME294LL/A MGXC2LL/A ) | ✔️If you also need Silicone Cup,please visit our ASIN: https://www.amazon.com/gp/product/B09Q21NHDH | ✔️Please make sure you have a MacBook Pro Retina A1425 A1502 A1398, AIR A1369 A1466 | ✔️These can be quite fragile so please make sure the new key cap is inserted in to place correctly and not simply just pushed down as this will damage the back of the key cap preventing it to fix in to place.

Package include : 1 Full Set US keycaps + 1pcs crowbar | Package do not include Scissor Clips Hinge and Silicon Cups | Scissor hinge problem can not be solved by replacing Keycap. | Replacement Models for: Macbook Air M2 M3 CPU Retina 13.6 inch A2681 A3113 2022 2024 year laptop | Replacement Sub Machines: MLXY3LL/A MLY03LL/A MLY23LL/A MLY13LL/A MLXW3LL/A MLXX3LL/A MRXU3LL/A MRXR3LL/A | Replacement Models for: MacBook Pro 14 16 inch M2 Pro A2779 A2780 2023 Year | Replacement Sub Machines:MPHK3LL/A MPHH3LL/A MPHE3LL/A MPHG3LL/A MNWE3LL/A MNWC3LL/A MPHH3LL/A MNWA3LL/A MNW83LL/A MPHE3LL/A | Replacement Model for:Macbook Air M2 M3 CPU Retina 15.3 inch A2941 A3114 2023 2024 year laptop | Replacement Sub Machines:MQKQ3LL/A MQKP3LL/A MQKR3LL/A MQKT3LL/A MQKU3LL/A MQKV3LL/A MRYP3LL/A MRYM3LL/A | Replacement Models for: MacBook Pro 14 16 inch M2 Pro A2918 A2992 A2992 2023 Year

Package include: LCD Adhesive Strips/Tape kit + Opening Tools Opening Wheel | Part number:946-4468, 946-4469, 946-4470, 946-4471, 946-4472 etc | Compatibility: iMac14,3 Late 2013 (ME086LL/A, ME087LL/A); iMac14,4 Mid 2014 (MF883LL/A);iMac13,1 Late 2012 (MD093LL/A, MD094LL/A), Early 2013 (ME699LL/A) | Compatibility: iMac16,1 Late 2015 (MK142LL/A); iMac16,2 Late 2015 (MK442LL/A), Retina 4K Late 2015 (MK542LL/A) | Compatibility:iMac16,2 Retina 4K Late 2015(MK542LL/A) (3.1 GHz Core i5); iMac16,2 Retina 4K Late 2015( MK542LL/A )(3.3 GHz Core i7)

Touchpad Mouse Button Left & Right

Touchpad Mouse Button Left & Right | Replacement Models for:Dell Latitude E7280 E7290 E7390 E7380 | Replacement Part Number:HR8RF

Package include: 1 x Trackpad Flex Cable | Replacement Models For: MacBook Pro 13 Retina A1502 Early 2015 | Replacement Part Number: 821-00184-A 923-00518 | Replacement Models For: MF839LL/A MF841LL/A MF843LL/A | This part is only for broken or unworking replacement of your laptop. Please make sure you have good technical skills with Disassembling or Assembling laptop.We just recommend clients who know how to install it to purchase it

☛☛☛Package only include trackpad , trackpad cable not include | Compatible For Machine: MacBook Pro 15-inch Touch Bar, 2016 2017 YEAR A1707 ,A1990 2018 2019Year | Compatible Model: MLH32LL/A MLH42LL/A MPTR2LL/A MPTT2LL/A,MR932LL/A MR942LL/A | Compatible:(EMC 3072) (EMC 3162) (EMC 3359) or (EMC 3215) | Compatible Part Number:821-00665-A 821-00665 821-01669-A 821-01669-01

✔️✔️✔️Package inlucde 1 PCS Keycap + 1 PCS Scissor | ✔️✔️✔️✔️If you need up and down keys please select 2 quantities | ✔️✔️✔️✔️✔️Package does not include clear silicon Cup.Rebound Cup problem can not be solved by replacing the key cap and hinge. | Replacement Models: For Macbook Pro 13 inch A2251 A2289 A2338, 16 inch A2141 2019-2021 Year, For Macbook Air 13 inch A2179, M1 A2337 2019-2021 Year | Replacement Models: For MacBook Pro M1 Pro Max Retina 14.2 inch A2442 MKGR3 MKGT3 EMC 3650, 16.2 inch A2485 MK1E3 MK1H3 EMC 3651 2021 Year | Please make sure what you need is same as our photos show.If your keycap or hinge is different with our listing, that means they can not fit each other. You should find other listings from our shop.

These are only Key-caps,not full keyboard | These key-caps not include white clip | Replacement Models for: Macbook Air Retina 13" A2179 2019 2020 Year | Replacement for EMC 3302 2019 2029 Year | Replacement Sub Machine:MWTJ2LL/A MVH22LL/A MWTL2LL/A | These can be quite fragile so please make sure the new key cap is inserted in to place correctly and not simply just pushed down as this will damage the back of the key cap preventing it to fix in to place.

These are only Key-caps,not full keyboard.These key-caps not include white clip | Package include: 1 SET keycaps + 1 PCS crowbar | Replacement Models For: Macbook Pro Retina 13" A1989 2018-2019 Year | Replacement Models For: Macbook Pro Retina 13.3 A1989 ( EMC 3214 ) ( EMC 3358 ) MV962LL/A MV972LL/A MV992LL/A MV982LL/A MR9Q2LL/A MR9R2LL/A MR9U2LL/A MR9V2LL/A | Replacement Models For: Macbook Pro Retina 15" A1990 2018-2019 Year | Replacement Models For:Macbook Pro Retina 15.4 A1990 ( EMC 3215 ) ( EMC 3359 ) MR932LL/A MR942LL/A MR962LL/A MR972LL/A MV902LL/A MV922LL/A MV912LL/A MV932LL/A

These are only Key-caps,not full keyboard.These key-caps not include white clip | Package include 1 SET Key caps + 1 pcs Crowbar | Replacement For EMC 3348 EMC3349 3456 | Replacement Models: for MacBook Pro 13" A2289 A2251 2020 Year, MacBook Pro 16" A2141 2019 Year | Replacement Sub Machine:MVVL2LL/A MVVM2LL/A MWP72LL/A MXK62LL/A | These can be quite fragile so please make sure the new key cap is inserted in to place correctly and not simply just pushed down as this will damage the back of the key cap preventing it to fix in to place.

Not inlucde White hing clip. | These are only Key-caps,not full keyboard | Replacement Models For: MacBook Air Retina 13" A2337 Touch bar M1 GPU 2020 Year | Replacement Sub Machines For:MGN63LL/A MGND3LL/A MGNA3LL/A MGN93LL/A MGN73LL/A MGNE3LL/A | These can be quite fragile so please make sure the new key cap is inserted in to place correctly and not simply just pushed down as this will damage the back of the key cap preventing it to fix in to place.

Package include : 1 Full Set US keycaps + 1pcs crowbar for Macbook Pro M1 Pro Max 14.2 16.2 inch A2442 A2485 2021 Year | ✔️✔️✔️✔️✔️Package DOES NOT include Scissor Clips Hinge and Silicon Cups | Scissor hinge problem can not be solved by replacing Keycap. For Scissor problem ,please visit Asin B09NN7GHBJ | Replacement Models: For Macbook Pro M1 Pro Max Retina 14.2'', 16.2'' A2442 A2485 laptop 2021 Year | Replacement Sub Machines For: 2021 Year Macbook Pro M1 Pro Max Retina 14.2''-- Silver ( MKGR3LL/A MKGT3LL/A), Space Gray (MKGP3LL/A MKGQ3LL/A) | Replacement Sub Machines For: 2021 Year Macbook Pro M1 Pro Max Retina 16.2'' -- Silver M1 MAX( MK1H3LL/A ),Silver M1 PRO( MK1E3LL/A MK1F3LL/A ), Space Gray M1 Pro ( MK193LL/A MK183LL/A ), Space Gray M1 MAX ( MK1A3LL/A ) | Replacement for EMS: EMC 3650 , EMC 3651 | Please make sure what you need is same as our photos show.If your keycap or hinge is different with our listing, that means they can not fit each other. You should find other listings from our shop.