Easy to Use: Features simple plug in operation | Compatible With: Any telephone system with DSL service | Includes: 2 pack of 2 wire (1 line) Ivory DSL Filter (ADSL Filter) | Noise Reduction: Reduce digital noise and unwanted interference caused by DSL | Perfect For: Use with DIRECTV, Satellite Dish, Comcast, TIVO (DVR), Telephone, Fax, Answering Machine, Printers, Modems, Computers and more

Easy to Use: Features simple plug in operation, with Built-in Splitter | Compatible With: Any telephone system with DSL service | Includes: 5 pack of 2 wire (1 line) Ivory DSL Filter (ADSL Filter) | Noise Reduction: Reduce digital noise and unwanted interference caused by DSL | Perfect For: Use with DIRECTV, Satellite Dish, Comcast, TIVO (DVR), Telephone, Fax, Answering Machine, Printers, Modems, Computers and more

Increases the range of your wireless device | High Gain Omni-Directional 8dBi Router, Wireless Transmitter, WiFi Booster Antenna Cable | Use for MINI PCI-E interface | 2 x 8dBi RP-SMA male (Hole in Center) Antenna for 2.4GHz 5.8GHz. (6.3in/16cm) | 2 x U.FL to RP-SMA Female connector cable.(7.9in/20cm)

Frequency: 2.4GHz / 5.8GHz || Big PCB Size: Length 3.74in, Width 0.54in | High Gain 8dBi Omni-Directional internal Antennas | Use for Mini PCIe Card(Cannot be used for M.2/NGFF interface.) | 2 x Cables of 50cm length | Compatible with Mini PCIe interface: 3160, 7260, 6235, QCA6174, MC7700, AR5B22, DW1510, RTL8188CE, 633ANHMW, 4965AGN, QCA9005, 8260HMW, BCM94313HMGB, BCM94322HM8L Card etc.

Frequency: 2400-2500MHz(2.4GHz), 4900-5900MHz(5.8GHz) || Big PCB Size: Length 3.74in, Width 0.54in | High Gain 8dBi Omni-Directional Internal Antenna | Use for M.2(NGFF) Slot Cards(Cannot be used for Mini PCIe Slot.) | 2 x Cables of 50cm length | Compatible with M.2 interface: 7260 7265 3160 3165 8260 8265 17265 18265 9260 9560 ax200 ax201 ME906E ME906V ME906J ME906C NGFF M2M WWAN Card etc.

High gain WIFI antenna- This 8dBi Omni-directional antenna with dual band 2.4GHz / 5.8GHz and RP-SMA Male connector which reduces interference, extend wireless range to dead spot | Pigtail Specifications- Coming with 2 pieces connector cables,Length: 35cm including the connectors; Connector type: U.fl / IPEX (MHF2) to RP-SMA Female | High quality- The WIFI antenna case is made of hard plastic, sturdy and durable. The internal is using high quality circuit board ensures maximum and stable signal quality | Multi-use- This wireless antenna works with most wireless devices, such as Mini PCIe Wireless Card Routers / Repeater / Range Extender / Desktop PC / Mini ITX Build / PCI Card / FPV UAV Drone / PS4 Build. WARM NOTICE: this wireless router antenna only use for MINI PCI-E Interface, Do Not Use for M.2 (NGFF) Interface, please check your connectors before buying | Easy to install- This wireless wifi antenna is easy to install, Simply replace current antenna to increase signal strength

Bundle Includes: 2 x Motorola CP100D Analog UHF Portable Non-Display Two Way Radio, 16 Channel, 4 Watt (403-480MHz), 2 x Motorola HKLN4606 Remote Speaker Microphone | Reliable Communication: Stay connected with the Motorola CP100D Two Way Radio, offering clear and consistent communication in any environment. With 16 channels and a powerful 4-watt output, this radio ensures reliable coverage and range, making it ideal for industries such as construction, security, and hospitality. | Easy to Use: Programmed to be compatible with Motorola RDU4100. Designed for simplicity and efficiency, the CP100D features intuitive controls and a user-friendly interface, allowing for hassle-free operation. Its compact and portable design makes it perfect for on-the-go professionals who need to stay connected while on the move, ensuring seamless communication without distractions. | Rugged and Durable: Built to withstand the demands of daily use, the CP100D is rugged and durable, capable of withstanding drops, shocks, and harsh environmental conditions. Whether you're working indoors or outdoors, you can rely on this radio to perform flawlessly, ensuring reliable communication when you need it most. | Versatile Applications: With its wide range of applications, the Motorola CP100D is the perfect communication solution for businesses, security teams, event organizers, and more. Whether you're coordinating tasks on a job site, managing operations in a busy facility, or organizing events, this radio provides dependable communication to keep your team connected and productive.

DESIGNED IN ENGLAND - Custom designed in the UK for the SONOS ONE, ONE Gen 2, ONE SL & PLAY:1 by Soundbass, a team of expert mechanical & acoustic engineers with over 30 years experience in audio part design. | PATENTED DESIGN - Our "Click & Lock" clamp means you can quickly and easily fit and adjust the wall mount in 15 minutes or less. | INGENIOUS DESIGN - The mounts are slim and almost invisible once the speaker is mounted to the wall. The speaker can be mounted in either orientation with a wall clearance of 61mm. The mount provides a swivel of +70° to -70° (left to right) and a tilt of +3° up, -35° down | INCLUDES MOUNTING HARDWARE - Comes with high quality mounting hardware, including screws, nuts, spanner and universal wall mounting anchors. | IMPORTANT - This is a TWIN pack containing two mounts and hardware kits. The speaker is NOT included with the brackets.

Compatible for Dymo LetraTag white plastic refills 91331 (s0721660), replace LT label tape | Color: Black on White. Width: 1/2"(12mm), Length: 13'(4m). 2-pack | Material: Thermosensitive synthetic paper. NON-OEM tape | Compatible with DYMO letratag label maker: LT-100H, LT-100T, LetraTag 100H Plus, LetraTag 100T Plus, LetraTag QX50, 200B Bluetooth Label Maker, XR, 2000. P12 printer | The 91331 label ribbon is wipeable, hard to tear off, long-lasting, and easy-to-use. Easy to peel with split-backing. Self-adhesive can stick surfaces such as plastic and glass. No sticky residue when removed | The 1/2 inch label maker refill is perfect for indoor use. You can create easy to read 12mm labeling tape at home, in the office or other setting | Cut the dynamo label tape in your own chosen lengths to labeling office files, kitchen objects, and any other things | The plastic label refill is made from polyester plastic paper so it is long-lasting than letratag paper label, but it is not made of plastic

ROR is safe and versatile for all delicate surfaces. | ROR is specifically designed to emulsify and remove microscopic oil residues- a by product of environmental pollution- from the surface and pores of glass and acrylic. | Non-flammable and 100% safe for coated lenses under all normal circumstances and proper technique, leaving no streaks or residue it safely breaks down and removes dust, dirt, and oil from all coated lens surfaces | Made in the USA of high purity quality ingredients

REDUCE VIBRATION and RESONANCE. Absorbing up to 95.32% of vibration and resonance, Hudson Hi-Fi’s Isolation Feet offer an effective solution for optimizing the true sound of stereo equipment. Isolation Feet effectively reduce vibration for all sensitive equipment. | PRECISION & CLARITY. Hudson Hi-Fi’s proprietary Platinum Silicone composite is designed to target sub and supersonic micro-vibrations to reduce resonance and further enhance sound. | SPECIFICATIONS. Durometer 20 (Shore A). Ideal for 30- 50lb components. Dimensions: 2" Diameter, 1" height. Temperature resistance of -40 ~+240 Degrees Celsius. | DURABLE & EASY TO INSTALL. Just place under your desired isolated component. Silicone preserves its form and does not deteriorate over time. Best of all, it leaves no black residue! | Excellent for Isolating Speakers, Subwoofers, Turntables, and Other Audio Equipment from Vibrations. Tightens Bass, Improves Sound

Includes: Pair of 6.5" Marine Speakers. Speaker Wire. Mounting Screws. Owner's Manual. Warranty Card. Features: Pair RockvilIe RSM65B 6.5" 320 Watt Waterproof Shallow Marine Speakers | CEA Compliant Power Ratings. Power Rating: 160 Watts Peak /40 Watts RMS Per Speaker. 6.5 Dual injection Cone Speaker System. Fully Marinized Against Salt & Fresh Water Conditions | Completely Waterproof and rustproof. Molded ABS plastic basket. Rubber Surround. 1 Voice Coil. 5.4 oz Y30 magnet. Pre-installed mounting screws included. Perfect for both marine, outdoor, and car use | Impedance: 4 Ohms. Frequency Response: 60Hz - 18KHz. Sensitivity: 90 dB. Total Diameter: 7.32 inches. Cutout Diameter: 5.31 inches. Total Height: 1.57 inches. Mounting Depth: 0.925 inches

Includes: Pair of 6.5" Marine Speakers. Speaker Wire. Mounting Screws. Owner's Manual. Warranty Card. Features: Pair RockvilIe RSM65W 6.5" 320 Watt Waterproof Shallow Marine Speakers | CEA Compliant Power Ratings. Power Rating: 160 Watts Peak /40 Watts RMS Per Speaker. 6.5 Dual injection Cone Speaker System. Fully Marinized Against Salt & Fresh Water Conditions | Completely Waterproof and rustproof. Molded ABS plastic basket. Rubber Surround. 1 Voice Coil. 5.4 oz Y30 magnet. Pre-installed mounting screws included. Perfect for both marine, outdoor, and car use | Impedance: 4 Ohms. Frequency Response: 60Hz - 18KHz. Sensitivity: 90 dB. Total Diameter: 7.32 inches. Cutout Diameter: 5.31 inches. Total Height: 1.57 inches. Mounting Depth: 0.925 inches

Package Includes: (1) Pair of RockvilIe 6.5" 600w ATV/UTV/RZR/CART/Polaris Speaker w/Multi Color LED+Remote. (1) RockvilIe R14G50MSW 50 Foot Spool Marine Waterproof 14 AWG Speaker Wire White. Pair of 6.5" marine speakers. 16.4 feet of Speaker Wire. Mounting Screws. LED Remote Controller. Features: RockvilIe RMC65L 6.5 2-Way 300 Watt Marine Boat Speakers with LED Light System. CEA Compliant Power Ratings. Power Rating: 300 Watts Peak /75 Watts RMS Per Speaker | System Power: 600 Watts Combined. 19 Dynamic LED Modes. 20 Switchable static LED Colors. 256-Grade PWM. Adjustable LED Strobe Speed. 5 Adjustable LED Brightness Settings. Slim Card Type LED Remote. Demo LED Mode. Included Remote can be paired with one or more speakers. Fully Marinized Against Salt & Fresh Water Conditions. Completely Waterproof and rustproof. Stainless Steel Terminals. Molded ABS plastic basket. Polypropylene Mica Injected Cone. Rubber Surround. High quality ferrite magnet | 13mm (0.5 inch) Polymer Tweeter. Oversized 1 CCAW Kapton Voice Coil. Pre-installed mounting screws included. Perfect for both marine, outdoor, and car use. Impedance: 4 Ohms. Frequency Response: 55Hz - 20KHz. Sound Pressure Level: 91dB @ 1w/1m. Total Diameter: 7.09. Cutout Diameter: 5.31. Total Height: 2.48. Mounting Depth: 2.48. Features: RockvilIe R14G50MSW 50 Ft Marine/Boat White Speaker Wire. Gauge: 14 Gauge. For Marine Audio Applications. Waterproof insulation | Also great for car audio applications. Stranding: 72x0.15mm x 2C (72 Strands of 0.15mm Wire per Wire). Braided Super-Flex Design Ensures Optimum Surface Area and Flexibility. Delivers Impressive Clarity, Bass Response, and Dynamic Range. Eliminated Unwanted Noises and Maximizes Signal Transfer. Color: White. Marine Grade Wire. Engineered to withstand daily harsh marine conditions. protected against corrosion and its soft, flexible PVC jacket surrounds. excellent signal transfer. | UL1426 Premium Oxygen Free Copper Boat Cable. Resistant to extreme cold, salt water, battery acid, oil, gasoline and ultra-violet radiation. Exclusive insulation is rated at 600 volts, 105 C dry and 75 C wet, and is resistant to heat and abrasion. Drawn copper, unidirectional lay for ultimate in sound quality. Exceeds all UL 1426, US Coast Guard Charterboat (CFR Title 46) and ABYC standards.

Unique Lighting Design: The LED lighting not only looks stylish but also features adjustable brightness that won’t distract or dazzle. It doubles as a night light, creating a beautiful ambiance in your space (The light can be turned off if desired) | Multiple Connection Options:In addition to wired connection to the computer, we have also added bluetooth function for wireless connection, allowing you to connect your mobile devices anytime. It also supports TF card and USB playback, so you can enjoy your favorite music whenever you want | Optimal Output Power: By transmitting bass vibrations directly to the ground, the subwoofer’s bass performance is amplified. With an output power of 10W + 4*2W, it fills your room with immersive sound and powerful bass. (Note: Since it’s powered by USB and the lighting consumes some power, the bass is stronger and more impactful in Bluetooth mode) | Compact Size: The subwoofer’s compact design fits easily into small spaces or on desktops, with a conveniently located knob on the right side for quick adjustments. The two mini speakers are small enough to fit neatly under your monitor | Wooden Subwoofer Design: The wooden subwoofer is sturdy and thick, effectively reducing noise and enhancing vocal clarity. Even at high volumes, the bass remains undistorted, delivering strong, stable sound with noticeable vibration

This is the latest version 2.13inch e paper display HaT,Compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+/4B,Jetson Nano | Ultra low power consumption, basically power is only required for refreshing | Preserved solder pads for SPI interface, compatible with other controller boards like Arduino/Nucleo, etc. | Onboard voltage translator, compatible with 3.3V/5V MCUs,Comes with development resources and manual (examples compatible with Raspberry Pi/Arduino/STM32) | No backlight, keeps displaying last content for a long time even when power down

This is 2.13inch E-Ink display HAT with Raspberry Pi 40PIN GPIO extension header, compatible with Raspberry Pi series boards, Jetson Nano. 250x122 resolution, Black and White Two Display colors, with embedded controller, communicating via SPI interface, supports partial refresh. | No backlight, keeps displaying last content for a long time even when power down. Ultra low power consumption, basically power is only required for refreshing. | SPI interface, for connecting with controller boards likeArduino/STM32, etc. Onboard voltage translator, compatible with 3.3V / 5V MCUs. | Version Notice: The driver board is Rev2.1 (Version 2.1), which is independent of the screen version. Currently, there is only Rev2.1 (Version 2.1) for the driver board and QC label V4 is for the screen version, QC label V4 is currently being shipped. | Comes with online development resources and manual (driver board circuit diagram, examples for Raspberry Pi/Jetson Nano/Arduino/STM32): bit.ly/3hZh77i

2.1mm Focal Length - This camera lens features a 2.1mm focal length to make every detail so clear that no message will be missed, thus preventing danger. | 150° Wide Angle - This IP camera lens supports 150° wide angle, which gives you a full vision. Makes whole situation under control. | 2.5mm F-number High Definition - This IP camera lens adopts high F-number up to 2.5mm to give you a super clear vision. | Precise Compatibility - The M12*0.5 lens is widely suitable for both 1/3'' & 1/4'' CCD chips with no stuck or conflict. | IR Lens - This CCTV lens supports night vision which gives you a 24-hour protection. So reliable.

150° WIDE ANGLE: The IP camera lens supports 150° wide angle, allowing you to have a complete field of view. Make the overall situation under control and bring you a sense of security. | 2.5MM F VALUE HIGH DEFINITION: This IP camera lens is 2.5 mm F value high definition, providing you with a super clear field of view, allowing you to observe the surrounding situation clearly. | 2.1MM FOCAL LENGTH: This CCTV camera lens adopts a 2.1mm focal length to make every detail clear, without missing any information, thereby avoiding danger and providing you with security. | INFRARED LENS: This CCTV lens supports night vision function and can provide you with 24-hour protection. It can also capture images clearly in the dark. You can choose with confidence. | ACCURATE COMPATIBILITY: This M12 * 0.5 lens is widely applicable to 1/3-inch and 1/4-inch CCD chips, with no jamming or conflict, strong compatibility and wide application range.

【150° Wide Angle】 - This IP camera lens supports 150° wide angle, which gives you a full vision. Makes whole situation under control. | 【2.5mm F-number High Definition】 - This IP camera lens adopts high F-number up to 2.5mm to give you a super clear vision. | 【2.1mm Focal Length】 - Adopting 2.1mm focal length to make every detail so clear that no message will be missed, thus preventing danger. | 【IR Lens】 - This CCTV lens supports night vision which gives you a 24-hour protection. So reliable. | 【Precise Compatibility】 - The M12*0.5 lens is widely suitable for both 1/3'' & 1/4'' CCD chips with no stuck or conflict.

160 ° Wide Angle: This IP camera lens supports a wide angle of 160 °, so you have a complete view. Show every corner of your family and do not miss any goals. | Product parameters: 2.1mm 150 ° wide angle lens with standard thread M12x0.5, suitable for 1/3 "and 1/4" CCD chipset, aperture is F2.0. | High Definition: This IP camera lens uses an F-value of up to 2.5mm for a clear view. You can see the goal or the scene more clearly. | Focal length: 2.1 mm focal length - With a focal length of 2.1 mm, every detail is clear and no information is missing. This avoids dangers. | Safe Customer Service: If you have any questions when you receive the goods, please contact us. We will respond with you and help you to solve the problem as soon as possible.

?180° wide angle? This IP camera lens supports a wide 180° angle, which gives you a complete vision. | ?2.1mm focal length? make every detail very clear so that you don't miss important moments | ?Infrared lens? This CCTV lens supports night vision, giving you 24-hour , safe and reliable | ?Accurate compatibility? the M12*0.5 lens is widely used on 1/2.5 | ?5.0 Megapixel? high definition image, good color and small distortion | | | | |

This Trackball Is Plug And Play With The iCade 60 in 1 | Ball Size: 2.25" | Width: 3-13/16 Length: 3-13/16 Height: 1 1/2 | Mounting hardware sold separately

2.2x Telephoto Lens | Optimized For Mega Pixel Photography | High Definition Digital Lens | MultiCoated Optical Glass | Extreme Speed Auto Focus

2.2x Telephoto Lens | Optimized For Mega Pixel Photography | High Definition Digital Lens | MultiCoated Optical Glass | Extreme Speed Auto Focus

compact for IoT wireless & M2M: 802.11AX, 802.11AC, 802.11N, 802.11G, 802.11B, 802.11A As access point antenna: Provides signal to clients in any direction (360-degree horizontal beamwidth). As client antenna: Connect to an access point in any direction. Designed for wireless 802.11ac and other Dual Band 2.4GHz / 5.8 GHz applications. Omni-directional direct connect antennas tuned to perform on 2.4 & 5.8 GHz networks. | Vertically polarized and suitable for many of today’s machine to machine and communication applications such as telemetry, remote monitoring and mesh networking applications. | The wifi antenna working great on PC motherboard and FPV quadcopter Antenna for Bolt 2000/3000 RX (Antenna 2dBi WiFi 2.4/5.8 GHz) Antenna for Bolt 1000 TX or RX (Antenna 2dBi WiFi 2.4/5.8 GHz) Antenna for Bolt 500 TX or RX (Antenna 2dBi WiFi 2.4/5.8 GHz) for WLAN devices using Dual-Band WiFi (802.11ac,802.11n, 802.11ax) or U-NII applications. | Sends WiFi / wireless signal high and low enough to reach 2 levels of a building. Omni dipole antenna: Radiates signal with a beam of 360 degrees; also receives signal from 360 degrees around it Mounts directly onto RP-SMA-female or SMA-female connector of radio or client device Bottom section of "right angle" version has articulating angle that can be adjusted to 90-degrees or other angle. The versions with an all-brass base (connector section) are waterproof / weatherproof rated IP65. | Product name:5.8G Omnidirectional Antenna Type:2.4/5.8G Connector: RP-SMA female V.S.W.R: Less than =1.8 Antenna gain:2dbi Frequencies: 2.4GHz ~ 2.5GHz 4.9GHz ~ 5.8GHz Function:Transmitting and Receiving Radiant scope:Omnidirectional Antenna Impedance:50ohm Length: 1.6 in / 4 cm Long (end-to-end) Weight: .6 oz / 17 g per antenna

✔️Access control keypad is Zinc Alloy anti-vandal case,2.4G wifi TouchKey Access Controller,Capacitive Door Bell Function,Touch Backlight keypad,12~18V DC,Touch keypad with doorbell,Backlit keypad,can set automatic OFF after 20 seconds， 2 devices can be interlocked for 2 doors | ✔️Waterproof IP67,Metal Housing,anti-vandal,Relay output,exit button,alarm,door contact,Wiegand 26~44bits,56bits,58 bits input & output,Can be used as Wiegand reader with LED & buzzer output ，User data can be transferred (except fingerprint users) .Integrated alarm & Buzzer output | ✔️Hardware User:1000 Capacity ,APP User:100 Capacity ,Card type:125Khz RFID EM Card One relay,1000 users (988 common users + 2 panic users +10 visitor users) ,Built-in light dependent resistor(LDR) for anti tamper | ✔️Tuya App Support ,iOS and Android available,Add/Delete User by APP,Support checking Opening Record,Support Gateway，Can be used as a standalone access keypad ,support strike lock/magnetic lock/Electric mortise lock/electric gate lock/bolt lock/access control power adapter | ✔️Multiple Access Modes:Smartphone,Card,PIN,Wifi-enabled waterproof touch keypad+RFID access controller. It's integrated with Tuya which supports 100 users (including 255 card/ PIN users). It's available for both iOS and Anddroid.This keypad can't be compatible with UHF card and encrypted card, for example, the card of following brands: HID, Indala,Cobra, APCiK ,Paradox,Radio,Honeywell, etc.

NUMERIC KEYPAD: 2.4Ghz wireless technology, plug and play, no device driver, stable signal transmission, no delay digital keypad. Power saving technology, extended service life, don't worry about your laptop numeric keypad battery. | COMPATIBILITY: Compatible with for Android Tablet numeric keypad, for Linux, for Chromebook for Windows XP, for Windows Vista, for Windows 7, for Windows 8, for Windows 10 series. | PROFESSIONAL DESIGN: Splash-proof design to reduce the possibility of water short circuit in the keyboard. Suitable for laptops, banks, schools, companies and so on. The keycap of a numeric keypad has a life time of more than 10 million times. | ERGONOMIC DESIGN: ABS material, compact and slim design, numeric keypad is easy to carry around, 18key numeric keypad, ergonomic tilt and non slip pad on the back provide optimal comfort. | TYPING COMFORT: The keys conform to the shape of your fingers, feel comfortable and can be typed blindly, and the chocolate keys are designed to rebound quickly.

[Compatibility] Widely compatible with most PC/ laptop with HM5/ GM45/ PM45/ HM57 chipset, or for PC/laptop mini PCI-E slot, such as for DELL/ Asus/ Toshiba/ Acer. | [High Performance] upgraded version of 5150, professional for 6250 WiMax WIFI Card, efficiency increase 35% in energy saving, stabiliity increase 8%, signal increase 15% compared to 5100 5300. | [Dual Band] 2.4GHz + 5GHz dual-band wireless technology ensures stable and fast signal transmission, transmission rate can be up to 300Mbps. | [Network] Wireless protocol support 802.11 A/ B/ H/ G/ N. | [Interface] 6250AGN+WiMax universal version, half height mini PCI-E interface ( 25mm30mm), pls make sure the interface is correct before purchasing.

Package:2 x Wifi Antenna +2 x 1.13 Pigtail Cable | This Wi-fi Antenna Can Provide You A Great Signal,Long-range Reception. Wifi Reception, Increases The Range Of Your Wireless Device | Work with most wireless devices,that do not normally support removable antennas | U.fl IPEX to SMA Female Bulkheead Cable/Adapter,Easy To Install | 100% Brand New and High Quality WiFi Antenna for Wi fi Wireless Wlan Router,Extend Wireless Range to Dead Spot

【2.4G 】: numeric keypad simply plugs the receiver into USB port and immediately starts crunching numbers, and fast with no delays and a distance of up to 33ft. | 【Comfortable To Touch】: Portable number pad is made of ABS to provide comfortable touch and control, good flexibility. Its tilt angle helps reduce stress for workers working with spreadsheets, accounting documents or financial applications. | 【Multifunctional】: One hand numeric keypad with shortcut keys to open your computer's calculator directly. Multifunctional 18 keys external numeric keypad can assist accounting work, excel spreadsheet. | 【Auto Sleep】: Portable silent number pad automatically goes into sleep mode after 5 minutes of non use, so there's no need to worry about wasting power. When the power is low, the indicator light will light up to avoid not being able to use it when you need it most. | 【Compatible】: numeric keypad can be used with PC, desktop and laptop computers, and works with for , for Win 7, for Win 8, for Win 10, for Win 11, for OS X and other systems. | | | | |

【2.4G Wireless】: Wireless numeric keypad simply plugs the receiver into USB port and immediately starts crunching numbers, and fast with no delays and a wireless distance of up to 33ft. | 【Comfortable To Touch】: Portable number pad is made of ABS to provide comfortable touch and control, good flexibility. Its tilt angle helps reduce stress for workers working with spreadsheets, accounting documents or financial applications. | 【Multifunctional】: One hand numeric keypad with shortcut keys to open your computer's calculator directly. Multifunctional 18 keys external numeric keypad can assist accounting work, excel spreadsheet. | 【Auto Sleep】: Portable silent number pad automatically goes into sleep mode after 5 minutes of non use, so there's no need to worry about wasting power. When the power is low, the indicator light will light up to avoid not being able to use it when you need it most. | 【Compatible】: Wireless numeric keypad can be used with PC, desktop and laptop computers, and works with for , for Win 7, for Win 8, for Win 10, for Win 11, for OS X and other systems. | | | | |

The hard drive adapter can adapts any 2.5" form factor SAS/SATA/SSD Drive to 3.5" form factor drive, without cables or hassles. Part No:654540-001. | Standard position mounting holes on Adapter's bottom and sides, equivalent to those found on a 3.5" hard drive, give you the flexibility to mount it anywhere a 3.5" drive is used. | Adapter's fixed mount connectors are attached to a simple circuit board, assuring solid connections between devices, and the outside connector is positioned to plug into a backplane as the tray is inserted. | The drive caddy adapter compatible with 3Gb/s and 6Gb/s SAS/SATA/SSD drives. | What you get: 2.5 to 3.5 Hard Drive Adapter x2, mounting screws x16, a 12-month warranty and lifetime technical support.

【COMPATIBILITY 】The hard drive caddy can be used all DELL PowerEdge servers that use 2.5 inch SAS/SATA hotswap drives, compatible part number P/N: G176J / 0G176J / 8FKXC / 08FKXC/ G281D / 0G281D / WX387. | 【WIDELY USE 】Heretom hard drive bracket compatible for PowerEdge 14th Generation T440 and T640; PowerEdge 13th Generation R930 R830 R730 R730XD R630 R430 T630 T430 XC730xd XC730 XC730; PowerEdge 12th Generation R920 R820 R720 R720XD R620 R420 T620 T420; PowerEdge 11th Generation R910 R810 R710 R715 R815 R610 R510 R415 T710 M910 M710 M610; PowerVault ME5024, ME4024, MD3620i, MD3420, MD3220, MD1220, MD1420. | 【Study and Durable 】The hard drive bracket is made of ABS plastic and metal, it would not easily get out of shape. Sturdy and durable that allows for protecting your hard drive. | 【What you get】2.5"Hard drive tray x1, mount screws x4, a 12-month warry and great customer service.

Replace Dell P/N: 8FKXC 08FKXC | Fit Models : Dell PowerEdge R630 R730 R730XD T630 R430 T430 PowerVault MD1420 MD3420 series | 100% Brand New and High Quality, shipped from US | Ensure it is compatible with your model and check pictures for more details.

This kit includes XH2.54mm(0.1 inch) 2/3/4/5/6/7 pin connector and socket, 90pcs pre-crimped wire, heat shrinkable tube and 1pcs tweezers. It is Perfectly Compatible with JST-XH2.54mm and XH2.5mm connector and socket | Widely used for Lipo battery balance lead, 3D printer, Woodland Just Plug Lights, circuit boards, speakers, monitors, household appliances, LED lighting, copiers, FAX machines, medical equipment, computers, electronic toys. | This set of connectors is easy to assemble, no crimping tool needed, just plug the pin to the housing | The pre-crimped cable is 22AWG soft silicone wire.

High-performance to 2.5x-speed with intel I226 chip, much faster data-transfer speeds for gaming, living broadcasts, and downloads in bandwidth-demanding tasks.PCIe 2.5Gbps Gigabit Ethernet Multi-gigabit Integrated MAC/PHY supporting 10BASE-Te, 100BASE-TX, 1000BASE-T and 2500BASE-T 802.3 specifications. | This 2.5GB Dual-Port NIC RJ45 Ethernet Network Card supports a motherboard with an X1/X4/X8/X16 slot and a PCIe gold-plated pin with nice electrical conductivity and high oxidation resistance. This 2.5GB PCIe network adapter comes with a low profile bracket, ideal for desktops, workstations, servers, mini tower cranes,s and other chassis. | Support Systems-This 2.5GB PCIe RJ45 Ethernet Network Adapter fully Compatible With Windows 11/10/8.1/8/7, Windows Servers 2022/2019/2016, and Linux to meet your diverse operating system needs. | With this 2.5GB Dual-Port PCIe NIC RJ45 Ethernet Network Adapter internet access, your gaming will be fully optimized with a large boost in speed, latency, and responsiveness. Large-sized game downloads, seamless live streaming, and massive data backups via the cloud are as easy as choosing your character. | For Local Connections, this 2.5GB PCIe Dual-Port NIC RJ45 Ethernet Network Adapter helps build a lightning-fast transport channel between a central storage device and other working machines in your local network. Also, Local data transmissions will be a breeze for you as you handle bandwidth-intensive tasks easily at your home or office.

Data Rate: 2.5Gb/s (Attention: Please make sure your switch or router is compatible with negotiating at 2.5Gbps at the port before placing order. ) | Interface: RJ-45 | Reach: up to 100 meters transmission over CAT.5e