【Speaker Frequency Divider】This is a professional 2 way crossover that is widely installed in speakers. It plays an important role in full-frequency signal segmentation. Treble and bass dual frequency support, helps to transmit the treble signal to the tweeter unit, and divide the bass signal into subwoofer unit. | 【Treble/Bass Dual Frequency Filter】Make the treble clear and increase the intensity of the bass, freely enjoy clear and natural music.To separate the mixed audio signal into a treble, bass, and then were sent to the corresponding treble, bass speaker unit in playback, resulting in enhance the sound quality purposes. | 【High Quality and Durability】Wire wound ceramic resistor and high-quality metal film capacitors, ensure its large load power, long-term durability, hard to burnout. | 【Reasonable Design】The 2 way frequency divider has large capacity, reasonable design, beautiful appearance, circuit board design with precise cutouts and lines, free for connecting, very suitable for DIY speaker. Widely use in treble and bass speakers, car full frequency speakers, or use treble/ bass alone. | 【Package Contains】2pcs speaker frequency divider. Series: HiFI , 2 way 2 unit (woofer and tweeter); Crossover frequency: 3200Hz; Power: 400W(MAX); Resistance: 4-16 Ohm.

Warm Tips: Please confirm the Speaker Size and Speaker Impedance of the sub-speaker before purchasing. Newly-stocked product, never used products. NOTE that this product is only a replacement, it is not original, and it requires customers to have a certain level of manual repair ability. | Parameters: Rated Power: 3W; Resistance: 4 Ohm; Diameter (with two ears): 34mm/1.33"; Diameter (excluding ears): 31mm/1.22"; Diameter of back voice coil：26mm/1.0"; Hight: 14mm/0.55"; Shape: Round; Quantity: 2 piece. | Advantages: This 4ohm speaker is a high quality speaker as a replacement for your sound system, and high sensitivity, loud voice, good and clear sound quality. Adequate volume, it will be your best choice if you have a good application. | Compatible: DIY Magnetic Speaker Round Shape Replacement Loudspeaker. This Replacement full-range loudspeaker unit also can compatible with Creature speaker/HarmanKardon soundsticks speaker/JBL On stage speaker/imac g3 DIY BT-Speaker. | Application: Small magnet speaker will be your best choice in DIY speakers and It will work well for home audio-visual equipment and other speakers, it will be your best choice if you have an ideal application.

Made of high quality rubber, same surround that professional reconers use, durable for use | Easy to follow step-by-step installation instructions, FREE technical support, easy to install | Replacement for a damaged one, remove the old rubber and clean the residual glue | Exquisite craft, wear-resistant, quality audio rubber grommet rings for speaker | This perforated rubber edge is ideal for speakers repair or DIY

【Design For 6.5" Speakers】 This 6.5-inch Speaker Mount Pods is installed by surface mounting, which has enough depth and width to fit your 6.5-inch speakers, and you can use it on your RVs, trunks, trailers, boats, cars, UTVs, golf carts, jeeps, and any surfaces such as door panel | 【Easy To Install】 This 6.5" speaker enclosure box has a pre-drilled holes design and helps you reduce the frequency of doing extra installation work, what's more, please make sure to measure the area 10 inches enough on the surface place you want to install before installation | 【Made Of High-Quality PP Material】 The 6.5 speaker enclosure boxes are made of high-quality PP material, which is known for its impact resistance and better mechanical properties than polyethylene, all of these make the speaker enclosure boxes sturdy, tough and protect your 6.5 inch speakers well | 【Seals For Not Leak Sounds】 We design a round foam gasket on the bottom of each 6.5-inch speaker enclosure pod to ensure positive transmission of sound waves and your listening pleasure, also, the gasket can make the pod adhere to the surface and effectively keeps dust and others out | 【About DIY On The Speaker Box】 We offer 12 screws and 2pcs speaker enclosure pods in every box, If you're going to paint on it, please make sure you sand before, because the paint will not stick to the stock surface, also, you can cut, trim, or drill it as needed for your install

Compatibility: Replacement for 2015-2019 Toyota Avalon; 2011-2019 Toyota Collora; 2015-2019 Toyota Rav4; 2012-2019 Toyota 4Runner; 2011-2017 Toyota Sienna; 2012-2019 Toyota Camry; 2016-2019 Toyota Tacoma; 2008-2019(Not fit 2010) Toyota Highlander dash; 2006-2008 Scion TC; 2008-2015 Scion XB IQ; 2015-2018 Subaru WRX; 2015-2018 Subaru WRX STI; 2013-2019 Subaru Crosstrek; 2014-2018 Subaru Forester; 2012-2016 Subaru Impreza. | Include: 2 Wiring Harness, Wiring Harnesses are easy plug and play without having to cut factory wires, No wiring anymore and no cutting needed, Just plugs right into the factory car. | Perfect Fit: Manufactured with factory quality toyota speaker wiring harness, Made quick work of the connection job. No soldering or splicing, Made your speaker upgrades really simple. | Premium Quality: Made of upgrade accessories material to ensure its lasting durability security and the music plays better. Fit for your car, Which maintain longtime usage. | Excellent Service: 72-8104, Singed to match the appearance of the original. Please confirm the part number of your care before purchasing.

¡¾MADE OF HIGH-QUALITY MATERIALS¡¿The rubber of this speaker is made of high-quality rubber, which is flexible, anti-aging and . The high-quality materials greatly extend the life of the rubber . | ¡¾EXCELLENT AUDIO EFFECT¡¿This speaker's rubber is produced with exquisite craftsmanship, high performance and high quality, which helps to obtain excellent audio effects with low tones. | ¡¾PERFECT SUBSTITUTE¡¿This replacement speaker rubber is perfectly compatible with and HiVi speakers, and is an ideal alternative to the perforated subwoofer surround sound ring. | ¡¾INSTALLATION NOTICE¡¿Before installing the new speaker rubber , please clean the remaining glue, otherwise it will make the rubber and the speaker not fit enough, affecting the use. | ¡¾BEFORE YOU BUY¡¿The inner diameter of the rubber of this speaker is 142mm, the inner diameter of the convex is 152mm, the outer diameter of the convex is 178mm, and the outer diameter is 196mm. Please pay attention to the size of the items before buying.

【Warm Tips】- Please confirm the Speaker Size and Speaker Impedance of the sub-speaker before purchasing. Newly-stocked product, never used products. | 【Parameters】- Rated Power: 3W; Resistance: 8 Ohm; Diameter (with two ears): 34mm/1.33"; Diameter (excluding ears): 31mm/1.22"; Diameter of back voice coil：26mm/1.0"; Hight: 14mm/0.55"; Shape: Round; Quantity: 2 piece. | 【Advantages】- This 8ohm speaker is a high quality speaker as a replacement for your sound system, and high sensitivity, loud voice, good and clear sound quality. Adequate volume, it will be your best choice if you have a good application. | 【Compatible】- DIY Magnetic Speaker Round Shape Replacement Loudspeaker. This Replacement full-range loudspeaker unit also can compatible with HarmanKardon soundsticks I, II, III speaker/JBL On stage speaker/ DIY BT-Speaker. | 【Application】- Small magnet speaker will be your best choice in DIY speakers and It will work well for home audio-visual equipment and other speakers, it will be your best choice if you have an ideal application.

1

The airpods cleaning kit comes with 2 cleaning pens and 2 cleaning cloths . which would be an ideal gift for anyone who listens to music a lot. We recommend that everyone obtain their own earbud cleaner for personal hygiene. | If the headphones are not cleaned for a long time, a lot of dirt will accumulate, including ear oil, sweat and dust. It will block the sound hole of the earphone and affect the sound quality of the earplug. It also makes you feel uncomfortable when you see your headphones. At this time, we need to clean the earplug cleaning pen in time. | The airpod cleaning pen has metal sharp teeth to remove dirt from hidden cracks and holes. The soft flocked sponge absorbs fine dust inside the wireless earbuds charging case. The high-density brush can easily clean the dirt on the sound hole of the earphone. | The Bluetooth earplug cleaning pen adopts push-pull double headed hidden design, equipped with flocking sponge, high-density brush and metal pen tip. The operation is very simple. It can be used with a gentle push. | You are welcome to be our valued customer, if you have any questions, please contact us immediately and we will solve it for you within 24 hours.

✔Material: Aluminum; Color:black ;125g /pc | ✔Size: 150 x 74 x10 mm/5.9 x 2.91 x 0.39 inch(L*W*T) | ✔Pre-coated thermal tape backing, Designed to maximize its surface area in contact with the cool air. | ✔Pure aluminum heat sink, which is suitable for electronic, computer, electrical facilities, Widely used in power transistors, FETs, ICs, power amplifiers, voltage regulators, MOSFETs, SCRs, etc | ✔Packaging: Includes 2 black anodized aluminum radiators

Size and shape: Product size: 100mm x 60mm x 10mm; Color: black; Shape: rectangular. | Easy to use: The heat sink comes with high quality, heat-dissipating double-sided adhesive tape for easy application. | Includes 2pcs double-sided adhesive heat-conductive adhesive sheets to prevent thermal runaway. Thermal conductivity of the adhesive sheet: 1.32 W/m-k The fins increase the area of the board and thus provide for greater heat transfer. Strong heat conductivity and heat dissipation. | Anti-thermal runaway measures: A good value heat sink that can be used for heat control of rectangular electronic devices. It can be used for heat dissipation in cell phones, power adapters, and various small electronic devices. The use of this heat sink not only improves the operating efficiency of the equipment, but also reduces the risk of heat-related malfunctions of the equipment due to high speed operation. Suitable for routers, 3.5" hard drives, 2.5" SSDs, smartphones, game consoles, LED amplifiers, etc. | Package: 2 heat sinks

Package Include : 2 pack Terminal Binding | Color coded plastic insulation jacket, for easier recognition. | Size: 41*35*15mm(L*W*H)

Applicable : Eye cups have an inner diameter of 27mm/1.06in, and are suitable for 42‑48 mm/1.65‑1.89 in microscope eyepieces, monocular binoculars and other eyepieces | Eye protecte: Binocular eye cups replacement, rubber eye cups help to create the perfect distance between eyes and tentacles, aiming to reduce the impact and better guard your eyes | Easy to store and carry: Binocular microscope, rubber eyepiece cover is foldable, easy to carry and store, easy to use, binocular eye cups are practical | Material: Telescopes eye cups are made of rubber, eye cups has a long service life | Excellent observation effect: Binocular eye cups replacement, after adding microscope eye cups, there is no external light source interference, and the observation effect is better

2pcs Eyepiece Cover 33mm Inner Diameter Binocular Rubber Eyepiece Eye Guards Cups Shield for 33mm Stereo Microscope Eyepieces Eyeshields | Foldable eye with flat sides. The inner diameter is 33mm ( the place to be connected to the observation end of the lens ). | This model can be folded, suitable for 33mm microscope eyepieces, telescopes and other lenses ( more suitable for wearing glasses, higher comfort ). | Eye masks are made of rubber. Rubber is elastic. So in addition to looking at the inner diameter of the eye, you should also consider rubber that is elastic and can be stretched. | The soft rubber can be folded.Easy to use.Durable and practical.

Compatible Models:For Dell Inspiron 5368 5378 7368 7460 7569 13-7000 | Package Included: 2x RUBBER FEET | Package Include: 2PCS | Please be sure to check your laptop compatibility before ordering this product‍ | 3. Color: Black

【Hot Shoe Protector】:Protects the shoe mount and contacts from dust, moisture and accidental impact. | 【Easy to Install & Remove】:Simply remove and store the cover to use a hot shoe flash or other camera accessory. | 【Material】:Made of durable ABS material, the black shoe cover slides into the camera's hot shoe easily but securely. | 【2 Pcs】:Package includes 2 pieces, in case of accidental loss. | 【Replace Canon ER-SC2 Shoe Cover】:The hot shoe cap is compatible with Canon EOS R8, R50, R6 Mark II, R7, R10, R3 and R5 C camera.

Package Includes: You will receive 2 pieces of wall mount compatible with Reolink Camera; 4 rubber plugs; 4 screws. | Compatibility: Our camera wall mount bracket is specially designed for Reolink E1 / E1 Pro, Mercury TPLINK. Please note that our product is not sponsored or endorsed by, or affiliated with the brands it fits, including Reolink, Mercury TPLINK. | Integrated Design: The tray and the bracket are integrated into one design. After you receive it, you can directly install the bracket on the wall, which brings you convenience. | Adjustable Design: The white knobs on both sides are adjustable; turn clockwise to fix the angle of the bracket; turn counterclockwise to adjust to the original angle of the bracket. You can adjust according to your needs. | Stable: Our camera mount is made of premium material, stable and reliable, effectively supporting your camera, so you can use it with confidence.

【Professional Design】Car audio passive crossover is reasonable wiring, nice components to ensure the right sound to enhance your experience, very practical. You can buy and use with confidence. | 【Improve Bass Sag】The crossover consists of bass inductor and magnet, which can improve bass sag and locate solderless plug in socket. | 【Premium Material】High gloss double layer heat dissipation ABS plastic housing, exquisite workmanship and very careful materials. Simple structure, and reliable, you can use it for a long time. | 【 to Use】The car audio crossover has excellent sound amplification tool with overcurrent can ensure use and reliable use. Please choose to buy according to actual needs. | 【Convenient to Use】The car speaker frequency divider is easy to use, connect the corresponding line, you can immediately tighten. Bring you a comfortable and convenient use experience.

Ultra-thin:This Card Case for AirTags is Card case sized, the minimum thickness is 0.1 inch. Made of environmentally friendly plastic materials, very light(0.5ounce）, suitable for all card wallets or handbags. | Secret but Effective: The Black wallet Case holder for AirTag is shaped of the ID card, which is very concise. This card sleeve design can make your tracker not so easy to be exposed, but it will not affect its receiving signal | Excellent Design: The card case's unique design. Put your tracker in a very fixed corner, Not only can it not affect the beauty of your wallet but also prevent Tag from being lost, which is very helpful to protect your wallet | Safety: The card cover protect your Tag from being scratched and lost, and the Tag will help you trace your wallet. | Practical: Put the Tag in the cardholder, and then put the card case in the wallet, put it in a child’s school bag, or any item you are worried about losing, it's very practical.

Mini stereo FM receiver module adopts advanced DSP and PLL technology ensure high quality broadcast receiving performance | 2. Application: 1>. FM Wireless Frequency 2>. USB PC Audio Broadcast 3>. Wireless Microphone 4>. Maternal And Infants Custody | this digital FM transmitter supports line/USB/mic channel input, its transmitting frequency range is 76.0~108.0 MHz, and the frequency response range is from 50 Hz to 18 KHz; Frequency adjustment stepping is 0.1 MHz/ times when short press the key and 1.0 MHz/ times for long press | On-board 2X3W stereo audio amplifier chip enable you to DIY FM radio easily, no extra audio amplifier circuit needed | You can get 2 Pieces Digital FM Transmitter Module Stereo FM Transmitter DSP PLL 76.0-108.0MHz Stereo Frequency Modulation with LCD Display Line/USB/Mic Input, DC 3.0V - 5.0V

Compatibility: fit for JOBO 2509N | Function: when you developing film by JOBO 2509N, this plate is necessary to install. | Professional safety light for darkroom.Package include: 2x developing panel (spiral reel not include in the parcel, only show the installation effect). | Brand: eTone

Package include:2 x adapters | application for Antennas, Wireless LAN Devices , Coaxial cable, Wi-Fi Radios External Antenna and so on | Impedance :50 ohm | Pure copper with much better Frequence Response.

Package Include:2 x SMA-BNC Adapters | Pure copper with much better Frequence Response. | Impedance: 50 Ohm | Commonly Used in RF Applications, Antennas, Wireless LAN Devices , Coaxial cable, Wi-Fi Radios External Antenna, >1000 Times Mating Life Time.

Package include:2 x adapters | Commonly Used in RF Applications, Antennas, Wireless LAN Devices , Coaxial cable, Wi-Fi Radios External Antenna, >1000 Times Mating Life Time. | Impedance :50 ohm | Connector Material:Pure brass with Great connectivity.(Not Alloy)

Package included:2pcs ESP32-CAM-MB Camera Module and 2pcs USB-TTL Serial Adapter Module | HK-ESP32-CAM-MB adopts Micro USB interface, convenient and reliable connection method, convenient to apply to various IoT hardware terminal occasions | HK-ESP32-CAM-MB module can work independently as the smallest system | A new W-BT dual-mode development board based on ESP32 design, using PCB on-board antenna, with 2 high-performance 32-bit LX6CPU, using 7-level pipeline architecture, main frequency adjustment range 80MHz to 240Mhz | Ultra-low power consumption, deep sleep current is as low as 6mA. It is an ultra-small 802.11b/g/n W+ BT/BLE SoC module -->>Our technical service team is always ready to answer your questions. please feel free to contact us--）

CONVENIENCE: The eyepiece eye cups can help create the perfect distance between the eye and the reach | : The rubber eye cover guards made of soft rubber that doesn't hurt your stereo microscope | PROTECT EYES BETTER: Eyepiece cover is designed to reduce impact, and better protect your eyes | ESSENTIAL ACCESSORY: Eyepiece cover protector is an essential microscope accessory to protect your stereo microscope and also your eyes | APPLICATION: The inner diameter of eyepiece eye is 36mm, suitable for 32-36mm stereo microscope | | | | |

82V, 300W, RM13 | ANSI Code: EXR or FHS | Base: GX5.3

Compatiable for Sony Walkman NW-A55HN A56HN A57HN A50 A55 A56 A57 | High sensitivity to touch. Protect your touch screen against scratches, dust and fingerprints. | The picture is clear, highlight the three-dimensional sense, improving the visual effect.Long time use of the eyes is not easy to fatigue, protect eyesight better. | Please note that our brand "BestforYou" is registered, please don't follow our list or copy our information, otherwise, we will report to amazon.

★GT-U7 module, with high sensitivity, low power consumption, miniaturization, extremely high tracking sensitivity, large coverage, high precision positioning under the narrow urban sky and dense jungle environment | ★Compatible with NEO-6M 51 MCU STM32 | ★Distribute active ceramic antenna for fast positioning | ★The module comes with LED signal indication and data backup battery | ★Working voltage: 3.6V-5V (or use Micro USB to directly supply power)

GPS module compatible with NEO-6M 51 MCU STM32, working voltage: 3.6V-5V (or use Micro USB to directly supply power) | GT-U7 module, with high sensitivity, low power consumption, miniaturization, its extremely high tracking sensitivity greatly expanded its positioning of the coverage. | GPS module with a USB interface, you can directly use the phone data cable on the computer point of view positioning effect; With IPEX antenna interface, the default distribution of active antenna, can be quickly positioned. | In the ordinary GPS receiver module can not locate the place, such as narrow urban sky, dense jungle environment, GT-U7 can be high-precision positioning. | GT-U7 module with USB directly connected to the computer, that is, with the host computer serial port function, without the need to connect to other serial modules

GY-NEO7MV2 default baud rate: 9600, Interface: RS232 TTL, Power: 3-5v | GY-GPS7MV2 module with a ceramic antenna, superior signal | NEO-7M GPS module Save the configuration parameter data EEPROM Down | This module is compatible with APM2 and APM2.5, and EEPROM can save all your configuration data, compatible with a variety of flight control module | NEO7MV2 with data backup battery;With LED signal indicator

Master-slave integration 2-IN-1 HC-05 Module: the original chip corresponds to the master-slave integration function. Master-slave integration can switch between master and slave modes. Through AT command setting, you can select master mode or slave mode. | AT Setting: Press the button and power on the module to enter the AT mode. AT commands are executed only in AT mode, which is easy to use. Default baud rate:4800,Default pin:1234, the default name is HC-05. | On-board 3.3V voltage regulator chip, input voltage DC 3.6V-6V; When not paired, current about 30mA (due to LED lights flashing, current in the state of change); After the pairing succeeds, the current is about 10mA | Working status indicator: Fast flashing LED means no Bluetooth connection, slow flashing means entering AT mode, double flashing means Bluetooth is connected and the port is opened. | Tips:Do not connect the power supply to the signal pin, otherwise the module will be directly damaged. The input voltage must not exceed 7V. (Note: this item doesn't works with iOS.)

HC-12 Power Supply Voltage: 3.2V~5.5V. (If the module is to be in the transmitting state for a long time, it is recommended to connect a 1N4007 diode in series when the power supply voltage exceeds 4.5V to avoid the built-in LDO heating of the module). | Default Communication Distance(open field test): about 600m (the communication distance can be adjusted up to 1000m, the air baud rate is 5000bps). | Default Idle Current: 16 mA (module operating current is different in different operating modes). | Operating Frequency Range(433.4-473.0MHz, up to 100 communication channels), maximum 100mW transmit power (settable). | Default Factory Setting: working mode FU3, baud rate 9600bps, communication channel CH001 (433.4M).

External HD Mini SAS SFF-8643 to SFF-8644 cable | High-speed data storage interface max up to 6Gbps (actual Data transfer speed is determined by the capabilities of the connected hardware) | SFF-8643 to SFF-8644 compliant with SAS 3.0 | Length: 1-Meter / 3.3 Feet, 2 Packs

[Excellent Sound Enhancement Tool] Equipped with high frequency capacitors, this speaker frequency divider helps to get correct sound with reasonable line and high standard components. | [Improve Bass Performance] The bass inductor and polymer magnet greatly improve bass sag, providing better bass performance for your car sound system. | [Sophisticated Materials] With an exquisite finish and sophisticated materials, this frequency divider is built to last and deliver superior sound quality. | [Easy Installation] Simply connect the corresponding wiring and tighten the screws, this frequency divider is easy and convenient to install. | [Beautiful and Sturdy Design] The high gloss double heat deflection dissipating ABS plastic shell of this frequency divider is not only beautiful and generous, but also sturdy and . | | | | |

Your Attention:this cable can Not work with SAS Driver | Mini SAS 36 pin (SFF-8087) connect to the controller, 4 x SAS connect to the HDD (Hard Disc Driver). | Connecting a SAS controller (SFF-8087) to four SATA disks (SFF-8482) | 2PCS/Per Pack

Based on optimized EoC active low frequency technology, can transmit network signals close to 10Mbps on the video coaxial cable medium. | The equipment is completely compatible with the IEEE802 LAN standard series network protocol and supports 128bit for AES encrypted transmission. | Support 720P, 960P, 1080P, 8MP HD IP web camera, absolutely compatible with it. | Use coaxial cable to transmit RJ45 Ethernet data signal, data transmission bandwidth 10/100Mbps. | No need to shut down for maintenance during use, can plug with electricity.

TOP QUALITY MATERIALS: Our Keyboard Stand was made of Aluminum alloy, very durable to use. | WIDE APPLICATIONS: The portable laptop stand is suitable for most laptops/desktop computer keyboards, compatible with Macbook Pro, Thinkpad, Samsung, Lenovo, Dell. | FUNCTIONS: The laptop feet can make notebook running cooler when you type or play games, and prevent from overheating and crashing when you use laptops or keyboards for a long time. | PROVIDE PERFECT ANGLE: This mini laptop stand can provide you with comfortable viewing angle and operating angle, make you always in the most relaxed state, and help you improve your sitting posture. | PACKAGE CONTENTS: 2pcs laptop risers.

✨ 2-in-1 Screen Cleaner Kit (Set of 2): All-in-1 cleaning tool that includes 2 Pieces Cleaner sprays with 10ml solution in them and covering microfiber cloth on its face layer; A cleaning pen for Airpods and IOS/ Android Charging Port; Small keyboard brush, and soft plush glasses clean cloth. 2 Pack item offers you the change to share with friends. | 🖥️ Screen Cleaner Mist and Microfiber Fiber Cloth for Electronics: They are cleaning, antistatic, and degreasing. Easy to remove the oil and fingerprint from the screen of cell phone, tablet PC, laptop, indicator, TV, iPad, iPhone, Macbook, watch, monitors, e-Readers, Kindle car displays screen; the glass of eyeglasses, sunglasses, the lens of the camera, etc. | ✏️ Other Clean Accessories Usage: Plastic cleaning Pen used to clean the dirty or the earwax on the AirPods. The small brush could help you clean some dirt in cracks or small areas. walrfid is equipped with a glasses cloth, which can be cleaned to some corners and crevices that are difficult to wipe on the screen. | 🌿 Safe Material and Easy to Use: Multifunctional iPad Screen Cleaner made of ABS clear protective and Microfiber. The cleaning solution is made of deionized purified water and surfactant, etc. Spray and wipe storage integrated.No alcohol, Non-toxic harmless, do not drop hair color, a spray a wipe, convenient and practical. Please keep it away from Children. | 💼 Portable Cleaner Kit and Easy to Storage: The product is a little larger than lipstick, making it an easy-to-carry size. Must-have computers, tablets, and laptop accessories for men or women. A good gift for students, teachers, white-collar office workers, photographers, and anyone who loves a gadget cleaning kit.

【2.4Ghz And 5G Double-Band Wifi】This Wireless Wifi Bulb Camera Supports 2.4Ghz And 5G Dual -Band Networks, Which Can Provide You With More Wireless Wifi Options And Can Control The Camera More Smoothly.It Can Be Installed Using A Normal E27 Bulb Base(110V~240V),Then Use The Mobile Phone To Download The App, And Use The App To Help The Bulb Camera Connect To The Wifi. No Other Operations Are Required. Note That It Takes About 40S To Connect The Bulb Camera For The First Time. | 【1080P And Intelligent Night Vision】Light Bulb Camera Outdoor Wifi 1080P Hd Bulb Camera Can Provide A Clear Picture Even At Night,Intelligent Night Vision Provides Ordinary Night Vision And Color Night Vision, You Can Easily Choose According To Your Own Needs | 【Remote Viewing And Ptz】Our Camera Can Control The Viewing Angle Through App, You Can Remotely View It Anytime And Anywhere Through For Iphone/For Android For Phone/For Ipad.This Bulb Camera Can Be Accessed Remotely Via Apply To Iphone/Android Phone. The Wifi Camera Can Provide You With A Clear View At Any Time. You Can Control The Camera'S Viewing Angle Through The App To Achieve 360-Degree Viewing Without Blind Spots. | 【Motion Detection And Real-Time Alerts】The Light Bulb Camera Outdoor 360° Degree Camera Bulb Camera System Adopts A Highly Sensitive Motion Sensort,Connect The Camera To Wifi,When A Moving Object Is Detected,It Will Record The Moving Picture And Notify You Through The App. | 【Two-Way Audio And High Quality Service】Light Bulb Camera Outdoor Wifi Built-In Microphone And Speaker, The Bulb Security Camera Can Have A Conversation Between You And Your Visitor,If You Have Any Question, Please Contact Us.We Provide Technical Support And Services. | Voltage: 5.0 Volts_Of_Alternating_Current | Wattage: 5.0 Watt_Hours | Mounting Type: Ptc Tower | Wireless Communication Technology: Wi-Fi