The three alarm sounds can be switched to each other | Eight sensors are installed around the car to alert the driver | Dual core host, more accurate and faster detection data

The product includes 2 extension wires for sensors, with lengths of 14.7FT and 6.6FT respectively | The cable is 2-pin and has good signal shielding function, effectively preventing signal loss | The cable length of the reverse radar sensor is recommended not to exceed 32.8fT. Beyond this distance, the signal may not be transmitted correctly and your product may not function properly.

1:Built -in sensors, better matching cars, just like the original accessories. The appearance is beautiful and fashionable. When reversing, the product is warned by sound, lighting, etc., making the driver safe and easy to make the driver safe and relaxed. | 2: The monitor uses red, yellow, green, three colors to indicate distance, green represents safety, yellow warning, red danger, like traffic lights. | 3: When the car is reversed, the system will automatically start. When the obstacle is detected, the driver is reminded by the sound and light through the sound. | 4: The voltage is 12V, the detection range is 0.3m ~ 2.3m (7.5FT), the data is accurate, the alarm is fast, the closer the obstacle, the faster the sound, such as: bi ... bibi ... bibibibibibibibibi. Elastic | 5: Easy to install, reliable quality, dual CPU design, quickly respond. | 6: Products include, 1 display, 1 control box, 4 sensors, 1 power cord, 1 drill, 1 book book

1:Built -in sensors, better matching cars, just like the original accessories. The appearance is beautiful and fashionable. When reversing, the product is warned by sound, lighting, etc., making the driver safe and easy to make the driver safe and relaxed. | 2: The monitor uses red, yellow, green, three colors to indicate distance, green represents safety, yellow warning, red danger, like traffic lights. | 3: When the car is reversed, the system will automatically start. When the obstacle is detected, the driver is reminded by the sound and light through the sound. | 4: The voltage is 12V, the detection range is 0.3m ~ 2.3m (7.5FT), the data is accurate, the alarm is fast, the closer the obstacle, the faster the sound, such as: bi ... bibi ... bibibibibibibibibi. Elastic | 5: Easy to install, reliable quality, dual CPU design, quickly respond. | 6: Products include, 1 display, 1 control box, 4 sensors, 1 power cord, 1 drill, 1 book book

Note: Customer feedback has 2 sensors not working! Because when reversing (when the yellow line has voltage), the middle obstacle in front of the car does not affect the reversing. Therefore, the two sensors in the middle are not activated, and more resources of the control box are used on other sensors to make the data faster and more accurate! They are activated when the car moves forward! | 1: When reversing, activate the rear 4 sensors and the front 2 sensors to detect and alarm. During normal driving, when braking, the 4 sensors in front of the car are activated to assist the driver to safely pass through narrow passages. When you release the brake, the parking sensor will work for about 15 seconds before stopping. | 2: Probe behind the car to prevent collision, probe in front of the car to prevent rubbing. | 3: On the display, there are 8 light bars representing each sensor, allowing the driver to distinguish the orientation of obstacles. | 4: The product has three alarm sound modes, real voice/beep/mute, which can be switched between each other. | 5: The product has 7-speed volume adjustable. | 6: The product alerts the driver through sound, numbers, and light bars at the same time.

Note: Customer feedback has 2 sensors not working! Because when reversing (when the yellow line has voltage), the middle obstacle in front of the car does not affect the reversing. Therefore, the two sensors in the middle are not activated, and more resources of the control box are used on other sensors to make the data faster and more accurate! They are activated when the car moves forward! | 1: When reversing, activate the rear 4 sensors and the front 2 sensors to detect and alarm. During normal driving, when braking, the 4 sensors in front of the car are activated to assist the driver to safely pass through narrow passages. When you release the brake, the parking sensor will work for about 15 seconds before stopping. | 2: Probe behind the car to prevent collision, probe in front of the car to prevent rubbing. | 3: On the display, there are 8 light bars representing each sensor, allowing the driver to distinguish the orientation of obstacles. | 4: The product has three alarm sound modes, real voice/beep/mute, which can be switched between each other. | 5: The product has 7-speed volume adjustable. | 6: The product alerts the driver through sound, numbers, and light bars at the same time.