Art Resin Kit Moulding, Casting, Potting, Encasing. Laminating, Adhesion, Wood countertop paint, Marine epoxy, Boat, Yacht, Bicycle, Motorbike, tumblers Art, Paintings/Crafts, Jewellery, Liquid glass, Stone coat Home Decorations Floor epoxy (garages, indoor, garden paths, penny floors, fiberglass) Tables (kitchen counter tops, garden tables, countertop, bars, wooden table) FAQ How much will I need for a surface area? A general rule is that 1kg of resina epoxica = 1m2 = 1mm thick layer. Epoxy Resin and Colour Pigments To achieve full colouration (i.e. a solid colour throughout), you would need 4% in pigments of the weight of the epoxy resin used. So if you are using 1kg of resin, you would need 40g of pigments. The Curing Time Epoxy resin undergoes a curing process, which is a chemical manifestation. It is not a drying time. The curing process of epoxy resin is directly related to the surrounding atmosphere temperature. Note: We do not recommend carrying a project with epoxy resin in cold temperatures. Curing time estimates: At 20C = 12-24 hours At 25C = 9-12 hours Getting the Right Results Here, we briefly highlight some of the commonest errors that can lead to non-curing of the resin and/or not getting a clear finish: High Humidity: In damp and humid conditions, moisture can seep into the resin while it is curing, which can lead to the cured resin looking cloudy or blotchy or having fractures. Keep the area dry and warm (turn the heating or a heating fan on), prior to starting the project and keep it on for the first few hours. Incorrect 1:1 Mixing Ratio: If the mixing ratio is inaccurate, the resin will not cure. Weigh with digital scales.