Infrared filters, sometimes called IR filters or heat-absorbing filters, are designed to allow IR mid-infrared wavelengths while block visible light. They are often used in devices with bright incandescent light bulbs (such as slide and overhead projectors) to prevent unwanted heating. | There are also filters which are used in solid state (CCD or CMOS) video cameras to allow IR due to the high sensitivity of many camera sensors to near-infrared light. These filters typically have a blue hue to them as they also sometimes block some of the light from the shorter visible light and UV wavelengths. | Digital cameras are usually equipped with IR-blocking filters to prevent unnatural-looking images. IR-transmitting (passing) filters, or removal of factory IR-blocking filters, are commonly used in infrared photography to pass infrared light and block visible and ultraviolet light. Such filters appear black to the eye, but are transparent when viewed with an IR sensitive device. | The creative adjustable IR filter is a compact all-in-one variable wavelengths filter that adjusts the amount of wavelengths with just the twist of your wrist. The index marks on the filter let you know exactly the amount of wavelengths at a glance. Giving you clear and precise shots at whichever wavelengths you are using. It offers you the freedom to create different wavelengths freely. | Now, you don't have to carry a bunch of filters for shooting. Just one filter, gives you from the range 530nm to 750nm freely.

Infrared filters, sometimes called IR filters or heat-absorbing filters, are designed to allow IR mid-infrared wavelengths while block visible light. They are often used in devices with bright incandescent light bulbs (such as slide and overhead projectors) to prevent unwanted heating. | There are also filters which are used in solid state (CCD or CMOS) video cameras to allow IR due to the high sensitivity of many camera sensors to near-infrared light. These filters typically have a blue hue to them as they also sometimes block some of the light from the shorter visible light and UV wavelengths. | Digital cameras are usually equipped with IR-blocking filters to prevent unnatural-looking images. IR-transmitting (passing) filters, or removal of factory IR-blocking filters, are commonly used in infrared photography to pass infrared light and block visible and ultraviolet light. Such filters appear black to the eye, but are transparent when viewed with an IR sensitive device. | The creative adjustable IR filter is a compact all-in-one variable wavelengths filter that adjusts the amount of wavelengths with just the twist of your wrist. The index marks on the filter let you know exactly the amount of wavelengths at a glance. Giving you clear and precise shots at whichever wavelengths you are using. It offers you the freedom to create different wavelengths freely. | Now, you don't have to carry a bunch of filters for shooting. Just one filter, gives you from the range 530nm to 750nm freely.

Infrared filters, sometimes called IR filters or heat-absorbing filters, are designed to allow IR mid-infrared wavelengths while block visible light. They are often used in devices with bright incandescent light bulbs (such as slide and overhead projectors) to prevent unwanted heating. | There are also filters which are used in solid state (CCD or CMOS) video cameras to allow IR due to the high sensitivity of many camera sensors to near-infrared light. These filters typically have a blue hue to them as they also sometimes block some of the light from the shorter visible light and UV wavelengths. | Digital cameras are usually equipped with IR-blocking filters to prevent unnatural-looking images. IR-transmitting (passing) filters, or removal of factory IR-blocking filters, are commonly used in infrared photography to pass infrared light and block visible and ultraviolet light. Such filters appear black to the eye, but are transparent when viewed with an IR sensitive device. | The creative adjustable IR filter is a compact all-in-one variable wavelengths filter that adjusts the amount of wavelengths with just the twist of your wrist. The index marks on the filter let you know exactly the amount of wavelengths at a glance. Giving you clear and precise shots at whichever wavelengths you are using. It offers you the freedom to create different wavelengths freely. | Now, you don't have to carry a bunch of filters for shooting. Just one filter, gives you from the range 530nm to 750nm freely.

Infrared filters, sometimes called IR filters or heat-absorbing filters, are designed to allow IR mid-infrared wavelengths while block visible light. They are often used in devices with bright incandescent light bulbs (such as slide and overhead projectors) to prevent unwanted heating. | There are also filters which are used in solid state (CCD or CMOS) video cameras to allow IR due to the high sensitivity of many camera sensors to near-infrared light. These filters typically have a blue hue to them as they also sometimes block some of the light from the shorter visible light and UV wavelengths. | Digital cameras are usually equipped with IR-blocking filters to prevent unnatural-looking images. IR-transmitting (passing) filters, or removal of factory IR-blocking filters, are commonly used in infrared photography to pass infrared light and block visible and ultraviolet light. Such filters appear black to the eye, but are transparent when viewed with an IR sensitive device. | The creative adjustable IR filter is a compact all-in-one variable wavelengths filter that adjusts the amount of wavelengths with just the twist of your wrist. The index marks on the filter let you know exactly the amount of wavelengths at a glance. Giving you clear and precise shots at whichever wavelengths you are using. It offers you the freedom to create different wavelengths freely. | Now, you don't have to carry a bunch of filters for shooting. Just one filter, gives you from the range 530nm to 750nm freely.

Infrared filters, sometimes called IR filters or heat-absorbing filters, are designed to allow IR mid-infrared wavelengths while block visible light. They are often used in devices with bright incandescent light bulbs (such as slide and overhead projectors) to prevent unwanted heating. | There are also filters which are used in solid state (CCD or CMOS) video cameras to allow IR due to the high sensitivity of many camera sensors to near-infrared light. These filters typically have a blue hue to them as they also sometimes block some of the light from the shorter visible light and UV wavelengths. | Digital cameras are usually equipped with IR-blocking filters to prevent unnatural-looking images. IR-transmitting (passing) filters, or removal of factory IR-blocking filters, are commonly used in infrared photography to pass infrared light and block visible and ultraviolet light. Such filters appear black to the eye, but are transparent when viewed with an IR sensitive device. | The creative adjustable IR filter is a compact all-in-one variable wavelengths filter that adjusts the amount of wavelengths with just the twist of your wrist. The index marks on the filter let you know exactly the amount of wavelengths at a glance. Giving you clear and precise shots at whichever wavelengths you are using. It offers you the freedom to create different wavelengths freely. | Now, you don't have to carry a bunch of filters for shooting. Just one filter, gives you from the range 530nm to 750nm freely.

Infrared filters, sometimes called IR filters or heat-absorbing filters, are designed to allow IR mid-infrared wavelengths while block visible light. They are often used in devices with bright incandescent light bulbs (such as slide and overhead projectors) to prevent unwanted heating. | There are also filters which are used in solid state (CCD or CMOS) video cameras to allow IR due to the high sensitivity of many camera sensors to near-infrared light. These filters typically have a blue hue to them as they also sometimes block some of the light from the shorter visible light and UV wavelengths. | Digital cameras are usually equipped with IR-blocking filters to prevent unnatural-looking images. IR-transmitting (passing) filters, or removal of factory IR-blocking filters, are commonly used in infrared photography to pass infrared light and block visible and ultraviolet light. Such filters appear black to the eye, but are transparent when viewed with an IR sensitive device. | The creative adjustable IR filter is a compact all-in-one variable wavelengths filter that adjusts the amount of wavelengths with just the twist of your wrist. The index marks on the filter let you know exactly the amount of wavelengths at a glance. Giving you clear and precise shots at whichever wavelengths you are using. It offers you the freedom to create different wavelengths freely. | Now, you don't have to carry a bunch of filters for shooting. Just one filter, gives you from the range 530nm to 750nm freely.

Made of aluminum alloy (not plastic), anodized construction. | Allows Contax/Yashica C/Y mount lens to be used on S0NY E-Mount mirrorless camera body. | Allows focus to infinity. Supports AV / M mode. | Please note although the lens will fit physically, automatic diaphragm, auto-focusing, or any other functions will not operated with using this adapter. | Designed for S0NY NEX-3 NEX-3C NEX-3N NEX-5 NEX-5C NEX-5N NEX-5R NEX5T NEX6 NEX7 NEX-F3 a6500 a6300 a6000 a5100 a5000 a3500 a3000 Alpha A7 A7R A7S & A7II A7RII A7SII NEX-VG10 VG20

Made of aluminum alloy (not plastic), anodized construction. | Allows M42 42mm Screw Mount Lens to be used on Olympus Panasonic Micro Four Thirds (MFT, M4/3) mountmirrorless camera body. | Allows focus to infinity. Supports AV / M mode. | Please note although the lens will fit physically, automatic diaphragm, auto-focusing, or any other functions will not operated with using this adapter. | Compatible Cameras (Including, but not limited to): Olympus PEN E-PL1, E-PL1s, E-PL2, E- PL3, E-P2, E-P3, PEN-F, E-PL7, E-PL8, E-PL9, E-M, OM-D, E-M1 MarkII, E-M5, E-M5 Mark II, E-M10, E-M10 Mark II, E-M10 Mark III, Panasonic Lumix DMC-G1, G2, G3, G9, G10, GX1, GH1, GH2, GF1, GF2, GF3, GF5, GH4, GH5, GH5s, GX85, GX7; Panasonic AG-AF100 Mirrorless Digital Cameras, Black Magic Pocket Cinema Camera (BMPCC).

Universal design for all DSLR cameras, video cameras, interchangeable-Lens cameras & Industry standard 15mm rod system and 19mm rod system. Support maximum of 14mm ultra-wide-angle lenses or large lenses up to 114mm in diameter. | Rugged & lightweight, Made of all metal CNC machined except for the matte box body and filter trays, in the case of ensuring the overall strength and minimize the weight. The excellent extinction treatment inside of the matte box, can effectively block the glare and reflected light. | For changing lenses quickly, the unit features a swing away mechanism at a 90 degrees and one key to unlock, automatic closure and allow height adjustable. Instead of moving the mounting position of the matte box, (which may be blocked by other rig accessories, or require rod extensions to fit) , it can simply be lifted one key to undo. | The kit includes one foldable French flag, and two adjustable side wings. All the flags can be folded and stored for easy carrying. Each of the three flags can be positioned and locked in place so as to suit different focal lengths by providing the maximum amount of shading without getting in the way of the shot. | A set of 6 “donut” rings are included. (Size at 104mm,98mm,88mm,84mm,76mm,64mm ). And comes with two filter trays, supporting 4x4" square filter in thickness from 1mm to 4mm. (One of the trays is up-down adjustable, the other allow rotating 360 degrees) . Also includes one sunshade board sheet (16:9).

This full decoded DR-E18 DC-coupler with USB cable allows you to connect with a power bank as external power source to be used with the camera, replacement for LP-E17 battery. | Compatible with Canon EOS 77D 200D 800D 750D 760D M3 M5 M6 EOS M6 Mark II Rebel T6i T6S X8i EOS RP USB plug is designed with voltage conversion circuit, and works with DC 5V 2A-4A power source. Connect the USB plug to power source and put the coupler into the camera battery compartment to provide stable and continuous power supply for your camera. Enables you to use external power source with your camera to achieve long time shooting, no need to replace camera battery again and again. | USB plug is designed with voltage conversion circuit, and works with DC 5V 2A-4A power source. | Connect the USB plug to power source and put the coupler into the camera battery compartment to provide stable and continuous power supply for your camera. | Enables you to use external power source with your camera to achieve long time shooting, no need to replace camera battery again and again.

Connects any battery/battery mount with D-Tap female connector to any camera/monitor designed to be powered by LP-E6 battery Built-In emulator chip delivers battery status to camera indicator. | You can power this cable of EVFs or your Canon 5D mark II 60D/7D with pro V-Mount or ANT0N Bauer batteries. also compatible with canon DSLR being powered by ANT0N Bauer batteries and SmallHD 501 / 502/ 702 Monitor . | There is build-in voltage transformer, support 10V-24V wide voltage input. Input: 10V-24V ; Output Current: 2A ; Output Voltage: 8V (stabilized) | Spring cable, very convenient and easy to use and pack. No more interrupt during the shooting. Straight length 25cm, extended length 1m. | Compatibility: for Canon EOS 5DS, 5DS R, 5D Mark IV, 5D Mark III, 5D Mark II, 6D, 7D, 7D Mark II, 80D, 70D, 60D, 60Da cameras.

Durable hard shell design,anti-scratch.Good for camera field monitor, battery, charger, cables, magic arm, smartphone, etc. | A good storage for multiple accessories.Can carry Fotga 5inch monitor together with a NP-F970 battery,a HDMI cable,a SDI cable,a hot shoe adapter,a sunhood at same time. | Exterior size: 190x106x85mm / 7.48 x4.17x3.35inch | Interior size: 180x75x35mm / 7.08 x2.95x1.38inch | Color: Black

1. Delay / Self Timer (DELAY) Just like the self timer on your camera. The timer remote switch allows you to set any delay (in 1 second increments) up to 99 hours, 99 minutes and 99 seconds. | 2. Interval Timer (INTVL) The Interval Timer can be set to any time period up to 100 hours as well. If you set it to 10 minutes, for example, one exposure will be taken every 10 minutes until either the film runs out or the Exposure Count limit has been reached. | 3. BULB/Long Exposure (LONG) It allows you to take time exposures up to 100 hours long. | 4. Exposure Count (N) This setting allows you to set the times of exposures that will be taken, up to a total 399 times. For example, if you set it to 30 times, then the exposure will be only taken 30 times.

1. Delay / Self Timer (DELAY) Just like the self timer on your camera. The timer remote switch allows you to set any delay (in 1 second increments) up to 99 hours, 99 minutes and 99 seconds. | 2. Interval Timer (INTVL) The Interval Timer can be set to any time period up to 100 hours as well. If you set it to 10 minutes, for example, one exposure will be taken every 10 minutes until either the film runs out or the Exposure Count limit has been reached. | 3. BULB/Long Exposure (LONG) It allows you to take time exposures up to 100 hours long. | 4. Exposure Count (N) This setting allows you to set the times of exposures that will be taken, up to a total 399 times. For example, if you set it to 30 times, then the exposure will be only taken 30 times. | Compatible with: Sony Alpha A58/A3000/A3500/A5000/A5100/A6000/A6300/A6500 Alpha A9/A7/A7 II/A7 III/A7R/A7R II/A7R III/A7S/A7S II/NEX-3NL DSC HX300/HX400/HX400V/HX50V/HX60V/HX90/HX90V DSC-RX10/RX10 II/RX10 III/RX10 IV/RX100 II/RX100 III/RX100 IV/RX100

★ This Quick-release lens foot plate is specially designed to take the place of the original tripod collar foot, fits for Nikon NIKKOR Z 800mm f/6.3 VR S Lens; Z 600mm f/4 TC VR S Telephoto Lens; Z 400mm f/2.8 TC VR S Lens. It features Arca-compatible dovetail which allow you attach your lens to Tripod Ball Head, Clamp or Panorama Head of Arca-Swiss standard. | ★ Made of advanced aviation alumium with precious CNC machining, guarantees long time sturdiness and stability. | ★ Reserved three 1/4" and two 3/8" screw mounting holes at the bottom, you can mount your lens on a tripod through it. | ★ With AS standard interface, compatible with all Acra-Swiss type quick release systems. It converts the collar to make it directly compatible with Arca-type quick release clamps. | ★ Size: 135mm x 38mm x 29mm/5.3" x 1.49" x 1.14" (Length x Width x Height ); Net Weight: 109g/3.84oz

★ This Quick-release lens foot plate is specially designed to take the place of the original tripod collar foot, fits for Sony FE 70-200mm F2.8 GM OSS II Lens (SEL70200GM2) , FE 70-200mm f/2.8 GM OSS Lens (SEL70200GM), FE 100-400mm F4.5-5.6 GM OSS Lens (SEL100400GM) , E PZ 18-110mm f/4 G OSS Lens (SELP18110G) . It features Arca-compatible dovetail which allow you attach your lens to Tripod Ball Head, Clamp or Panorama Head of Arca-Swiss standard. | ★ Made of advanced aviation alumium with precious CNC machining, guarantees long time sturdiness and stability. | ★ Reserved two 1/4" and one 3/8" screw mounting holes at the bottom, you can mount your lens on a tripod through it. Two safety stop screws in both side on the bottom to prevent drop by accident. The safety lock makes it easy putting on or off from the collar of the lens. | ★ With AS standard interface, compatible with all Acra-Swiss type quick release systems. It converts the collar to make it directly compatible with Arca-type quick release clamps. | ★ Size: 85mm x 38mm x 35mm/3.3" x 1.49" x 1.37" (Length x Width x Height ); Net Weight: 98g/3.46oz

★ This Quick-release lens foot plate is specially designed to take the place of the original tripod collar foot, fits for Sony FE 200-600MM F/5.6-6.3 G OSS E-Mount Lens. It features Arca-compatible dovetail which allow you attach your lens to Tripod Ball Head, Clamp or Panorama Head of Arca-Swiss standard. | ★ Made of advanced aviation alumium with precious CNC machining, guarantees long time sturdiness and stability. | ★ Reserved three 1/4" and one 3/8" screw mounting holes at the bottom, you can mount your lens on a tripod through it. Two safety stop screws in both side on the bottom to prevent drop by accident. | ★ With AS standard interface, compatible with all Acra-Swiss type quick release systems. It converts the collar to make it directly compatible with Arca-type quick release clamps. | ★ The safety lock makes it easy putting on or off from the collar of the lens. | ★ Size: 107mm x 64mm x 38mm(Length x Width x Height); Net Weight: 107g

【Wide Compatibility】This lower quick release plate is specifically designed for DJI Ronin RS4/RS4 Pro and also compatible with RS3/RS3 Pro/RS2 gimbal stabilizers to attach camcorders or cameras, which can quickly switch among the tripod, gimbal, and other rigs. | 【Rapid Locking Without Tools】This lower quick release plate compatible with Manfrotto, featuring a built-in Arca-Swiss base, can be swiftly secured using a thumbscrew, eliminating the need for any tools. | 【Precise scale & fine adjustment】Built-in millimeter scales on both sides of the quick release plate can help you adjust the camera position accurately. And a gear rack at the bottom that allows the quick release plate to make a slight adjustment. | 【Multiple Mounting Points】 The plate has reserved 1/4"-20 threaded screw to fit for most cameras and camcorders. Screwless designed Heavy Duty D-Ring to attach/detach quickly from your camera. There are multiple M4 screw holes on the sides for additional attachment. | 【Premium Quality】Made of high quality CNC precision aluminum alloy and surface processed with hard anodized oxidation treatment, it is durable and lightweight. Durable rubber cushions on top protects your camera from scratches.

Made of Metal. This Macro Extension Tube for Olympus 4/3 Mount DSLR/SLR Cameras is composed of 3 extension tubes - 7mm, 14mm, 28mm and male and female adapters. Mount the tubes between lens and camera body to get your choice of macro ranges. | It can be used in any combination or individually to obtain the exact magnification you need to capture the perfect macro shot. The longer the tube length the closer the lens can focus. | Use this set with your normal lens and you will get the quality, which is as good as the original lens and the size, sharpness and versatility is perfect for the macro and close-up pictures. | Suitable For: All Olympus 4/3 Mount DSLR/SLR Camera, such as Olympus E-5, E-7, E420, E620, E520, E-410, E-510, E500, E3, E510, E-300, e-300 EVOLT, E450, E30, E400 DO NOT fit E-10，E-20N，E-20P. | Note: There are no electrical contacts in the extension tubes. You need to use manual focus and manual exposure while shooting.Exposure has to be adjusted manually. Aperture control is not available if you use a lens which does not allow you to manually adjust the aperture (without an aperture ring).

Material: Full Metal; Diameter of the tubes: Approx. 61.5mm. Tube length: 10mm, 16mm; Suitable for: All Micro Four Third M4/3 mount camera | This high quality automatic macro Extension Tube Set is designed to enable a lens to focus closer than its normal set minimum focusing distance. Getting closer has the effect of magnifying your subject (making it appear larger in the viewfinder and in your pictures). They are exceptionally useful for macro photography, enabling you to convert almost any lens into a macro lens at a fraction of the cost while maintaining its original optical quality. | The DG extension tubes have no optics. They are mounted in between the camera body and lens to create more distance between the lens and film plane. By moving the lens father away from the film or CCD sensor in the camera, the lens is forced to focus much closer than normal. The greater the length of the extension tube, the closer the lens can focus. | It comes as a set (10mm+16mm). It contains 2pcs tubes in different length 10mm/16mm, which can be used in any combination or individually to obtain the different magnification. | Designed with electronic contacts,which make it support automatic focusing,automatic exposure,etc. It enables you to use all shooting modes of the camera, exposure compensation is required.

The tripod mount ring mount on the tripod, it helps you fix and balance your tele lens which is heavy or long lens hanging off the front of camera. | It features Arca-compatible dovetail plate which allow you attach your lens to Ball Head, Clamp or Panorama Head of Arca-Swiss standard. | Reserved multiple 1/4"-20 & 3/8"-16 thread screw holes at the bottom for attach lens to tripod directly. | Made of aviation aluminum alloy and CNC precision machining, anodizing surface treatment, right weight and strong building. | Compatible with: For Tamron 35-150mm F/2-2.8 Di III VXD (A058) Lens (E-mount); For Sigma 100-400mm f/5-6.3 DG OS HSM Contemporary Lens ( for Canon EF Mount, for Nikon F Mount)

The tripod mount ring mount on the tripod, it helps you fix and balance your tele lens which is heavy or long lens hanging off the front of camera. | It features Arca-compatible dovetail plate which allow you attach your lens to Ball Head, Clamp or Panorama Head of Arca-Swiss standard. | Reserved multiple 1/4"-20 & 3/8"-16 thread screw holes at the bottom for attach lens to tripod directly. | Made of aviation aluminum alloy and CNC precision machining, anodizing surface treatment, right weight and strong building. | Compatible with: For Tamron 50-400mm F/4.5-6.3 Di III VC VXD (A067) Lens; For Tamron 100-400mm F/4.5-6.3 Di VC USD (A035) Lens (For Canon EF Mount, For Nikon F Mount)

The reverse protection ring is specifically designed for lens macro photography. | When you reverse mounted your lens, installing this adapter can protect your lens rear part to avoid unexpected damage and contaminate. | In addition, the ring have 52mm screw mount, you can re-installed filter a 52mm UV/MC UV/CPL ND Filter and 52mm lens cap, playing a protective role of the lens. | Material: Anodized aluminum ; Screw diameter: 52mm | Compatible with: Nikon D7500, D7200, D7100, D7000, D5600, D5500, D5300, D5200, D5100, D5000, D3400, D3300, D3200, D3100, D3000, D810, D800, D800E, D750, D700, D610, D600, D300, D300S, D200, D100, D50, D60, D70, D80, D90, D40, D40x, N70s, D4, D4S, D3, D3S, D3X, D2, D2H, D2Hs, D2X, D2Xs, D1, D1H, D1X, DF with all 52mm filter diameter Nikon lens.

The tripod mount ring mount on the tripod, it helps you fix and balance your tele lens which is heavy or long lens hanging off the front of camera. | It features Arca-compatible dovetail plate which allow you attach your lens to Ball Head, Clamp or Panorama Head of Arca-Swiss standard. | Reserved multiple 1/4"-20 & 3/8"-16 thread screw holes at the bottom for attach lens to tripod directly. | Made of aviation aluminum alloy and CNC precision machining, anodizing surface treatment, right weight and strong building. | Compatible with Sigma 105mm f/1.4 DG HSM Art (EF/FX/FE/L-mount) & For Sigma 100-400mm f/5-6.3 DG DN OS (E-mount, L-mount); Note: NOT compatible with Sigma 100-400mm f/5-6.3 DG OS HSM Contemporary ( EF Mount, Nikon F Mount ) lens and other lenses

Suitable for Canon EF 70-300mm f/4-5.6L IS USM Telephoto Zoom Lens | The tripod mount ring mount on the tripod, it helps you fix and balance your tele lens which is heavy or long lens hanging off the front of camera. | Made of strong & durable aluminum, fine workmanship ensure perfect conformity in color and surface qualities. | The UNC (Unified National Coarse Thread) is 1/4" | Ring diameter: 81mm | Color: White

Suitable for Sigma APO 70-200mm F2.8 II EX DG MACRO HSM Zoom Lens | The tripod mount ring mount on the tripod, it helps you fix and balance your tele lens which is heavy or long lens hanging off the front of camera. | Made by metal with high quality and strong building. | The UNC (Unified National Coarse Thread) is 1/4" | Ring diameter: 71mm; Ring thickness: 4.5mm

The tripod mount ring mount on the tripod, it helps you fix and balance your tele lens which is heavy or long lens hanging off the front of camera. | It features Arca-compatible dovetail plate which allow you attach your lens to Ball Head, Clamp or Panorama Head of Arca-Swiss standard. | Reserved multiple 1/4"-20 & 3/8"-16 thread screw holes at the bottom for attach lens to tripod directly. | Made of aviation aluminum alloy and CNC precision machining, anodizing surface treatment, right weight and strong building. | Compatible with: For Tamron 18-300mm F/3.5-6.3 Di III-A VC VXD Lens

The tripod mount ring mount on the tripod, it helps you fix and balance your tele lens which is heavy or long lens hanging off the front of camera. | It features Arca-compatible dovetail plate which allow you attach your lens to Ball Head, Clamp or Panorama Head of Arca-Swiss standard. | Reserved multiple 1/4"-20 & 3/8"-16 thread screw holes at the bottom for attach lens to tripod directly. | Made of aviation aluminum alloy and CNC precision machining, anodizing surface treatment, right weight and strong building. | Compatible with: For Nikon NIKKOR Z 180-600mm f/5.6-6.3 VR Lens

The tripod mount ring mount on the tripod, it helps you fix and balance your tele lens which is heavy or long lens hanging off the front of camera. | It features Arca-compatible dovetail plate which allow you attach your lens to Ball Head, Clamp or Panorama Head of Arca-Swiss standard. | Reserved multiple 1/4"-20 & 3/8"-16 thread screw holes at the bottom for attach lens to tripod directly. | Made of aviation aluminum alloy and CNC precision machining, anodizing surface treatment, right weight and strong building. | Compatible with: For Tamron 70-180mm F/2.8 Di III VXD (A056) Lens

The tripod mount ring mount on the tripod, it helps you fix and balance your tele lens which is heavy or long lens hanging off the front of camera. | It features Arca-compatible dovetail plate which allow you attach your lens to Ball Head, Clamp or Panorama Head of Arca-Swiss standard. | Reserved multiple 1/4"-20 & 3/8"-16 thread screw holes at the bottom for attach lens to tripod directly. | Made of aviation aluminum alloy and CNC precision machining, anodizing surface treatment, right weight and strong building. | Compatible with: For Canon RF 70-200mm F2.8 L IS USM Lens

The tripod mount ring mount on the tripod, it helps you fix and balance your tele lens which is heavy or long lens hanging off the front of camera. | It features Arca-compatible dovetail plate which allow you attach your lens to Ball Head, Clamp or Panorama Head of Arca-Swiss standard. | Reserved multiple 1/4"-20 & 3/8"-16 thread screw holes at the bottom for attach lens to tripod directly. | Made of aviation aluminum alloy and CNC precision machining, anodizing surface treatment, right weight and strong building. | Compatible with: For Samyang 35-150mm F2-2.8 Lens

Suitable for Canon EF 70-200mm f/2.8L USM; Canon EF 70-200mm f/2.8L IS USM; Canon EF 70-200mm f/2.8L IS II USM; Canon EF 70-200mm f/2.8L IS III USM; Canon EF 100-400mm f/4.5-5.6L IS USM; Canon EF 35-350mm f/3.5-5.6L USM; Canon EF 300mm f/4L IS USM | The tripod mount ring mount on the tripod, it helps you fix and balance your tele lens which is heavy or long lens hanging off the front of camera. | Made by metal with high quality and strong building. | The UNC (Unified National Coarse Thread) is 1/4"; Ring diameter: 78mm; Ring width: 18mm; Ring thickness: 4mm; Bottom plate length: 60mm; Color: White; Weight: 155g | Quick release plate is AS 39mm standard, compatible with RRS / ARCA-SWISS / KIRK / WIMBERLEY / MARKINS / SUNWAYFOTO / KANGRINPOCHE / BENRO / SIRUI / MARSACE / ISHOOT ball head of Arca 39mm fit.

The tripod mount ring mount on the tripod, it helps you fix and balance your tele lens which is heavy or long lens hanging off the front of camera. | It features Arca-compatible dovetail plate which allow you attach your lens to Ball Head, Clamp or Panorama Head of Arca-Swiss standard. | Reserved multiple 1/4"-20 & 3/8"-16 thread screw holes at the bottom for attach lens to tripod directly. | Made of aviation aluminum alloy and CNC precision machining, anodizing surface treatment, right weight and strong building. | Compatible with: For Sony E 10-18mm F4 OSS Lens, FE 12-24mm F4 G, FE 16-35mm F4 ZA OSS, FE 16-35mm F2.8 GM, FE 16-70mm F4 ZA OSS, E PZ 18-105mm F4 G OSS, E 18-135mm F3.5-5.6 OSS, FE 24mm F1.4 GM, FE 24-70mm F4 ZA OSS, FE 24-70mm F2.8 GM, FE 24-105mm F4 G OSS, FE 24-240mm F3.5-6.3 OSS, FE 28-70mm F3.5-5.6 OSS, FE 35mm F1.4 ZA, FE 50mm F1.4 ZA, FE 50mm F2.8 Macro, FE 85mm F1.4 GM, FE 85mm F1.8, FE 90mm F2.8 Macro G OSS, FE 100mm F2.8 STF GM OSS, FE 12-24mm F2.8 GM, E 70-350mm F4.5-6.3 G OSS etc.

The tripod mount ring mount on the tripod, it helps you fix and balance your tele lens which is heavy or long lens hanging off the front of camera. | It features Arca-compatible dovetail plate which allow you attach your lens to Ball Head, Clamp or Panorama Head of Arca-Swiss standard. | Reserved multiple 1/4"-20 & 3/8"-16 thread screw holes at the bottom for attach lens to tripod directly. | Made of aviation aluminum alloy and CNC precision machining, anodizing surface treatment, right weight and strong building. | Compatible with: For Canon RF 100-400mm F/5.6-8 IS USM Lens

FocusFoto extension mounting plate is specially designed for DJI Ronin S/SC/RS2/RSC2/RS3/RS3 Pro/RS3 Mini/RS4/RS4 Pro Gimbal to attach photographic accessories to the side of gimbal. | This plate is equipped with five 1/4"-20 threaded screw holes and one 3/8"-16 threaded screw hole, one Arri 3/8"-16 locating hole and one cold shoe mount, which provides a variety of options for your gimbal such as monitor, magic arm, microphone, fill light, etc. | This mounting plate secures to the side of gimbal via two M4 screws which makes it easier to install and prevent dropping. | Made of premium aluminum alloy, sturdy and durable. Weights only 17g, mini lightweight and portable. | Size: 45mm*36mm*7.2mm/1.77*1.41*0.28 inches

pecially designed for rainy days or wet condition, full body wrap, no water rush into even rainstorm or blizzard; Low temperature resistance, can work perfectly even under extreme cooling environment | Easy access to all operations through the left & right cuffs; | Clear TPU viewfinder allows further convenience in use | Can be mounted on tripod, or hand wear; Bottom zipper can be closed after hand wearing or being mounted on tripod | Tail drawstring used to fix and support the DSLR, adjustable for different lens size(Lens girth within 35cm)

The black tripod or light stand case is an affordable, lightweight and functional way to store or carry your tripod, light stand and umbrellas, protecting from the damage, scratches and etc. | Premium smooth zipper to make it easier to get your tripod in and out, as well as be able to extract the tripod. | The fixed shoulder sling and smooth nylon exterior for extra protection. | High density, closed cell, moisture resistant. | Size: 85cm; Material: Nylon; Color: Black

Natural and environmentally friendly and non-toxic. Shape Rocket Style Design, that is so cool！ | The function of this blower is to gently remove dust & erase smudges from delicate equipment without leaving residue. | Air inlet valve design prevents air back flow from nozzle. Detachable supper air stream air nozzle. Tripod base design provides free-standing function. | Excellent way to remove dust off sensitive camera parts without physical contact. | Perfect for cleaning digital SLR, SLR, digital camera lens, binocular lens, and telescope lens, filters, musical instruments, computers, keyboards, cellphone, etc.

The strap is made of High elasticity sponge (Neoprene), soft and comfortable. | Maximum comfort strap for carrying a heavy tripods without any ring hook on the tripod and rope on the Tripod, just securing the tripod leg together with the adjustable buckle type D-shaped strap. Easy & Quick release. | Thick and wide pad enhances the robustness will certainly adhered to the shoulder, reduces the weight of the tripod and makes you feel significantly lighter than actual weight. | The non-slip rubber bottom part of the pad will also prevent it flowing from the shoulder. | The straps designed to be minimized an affliction and a big reduced user's fatigue. Ideal for outdoor shooting and traveling.

This high quality automatic macro Extension Tube Set is designed to enable a lens to focus closer than its normal set minimum focusing distance. Getting closer has the effect of magnifying your subject (making it appear larger in the viewfinder and in your pictures). They are exceptionally useful for macro photography, enabling you to convert almost any lens into a macro lens at a fraction of the cost while maintaining its original optical quality. | The DG extension tubes have no optics. They are mounted in between the camera body and lens to create more distance between the lens and film plane. By moving the lens father away from the film or CCD sensor in the camera, the lens is forced to focus much closer than normal. The greater the length of the extension tube, the closer the lens can focus. | It comes as a set (10mm+16mm). It contains 2pcs tubes in different length 10mm/16mm, which can be used in any combination or individually to obtain the different magnification. | Designed with electronic contacts,which make it support automatic focusing,automatic exposure,etc. It enables you to use all shooting modes of the camera, exposure compensation is required. | Compatible Cameras (Including, but not limited to): Olympus PEN E-PL1, E-PL1s, E-PL2, E- PL3, E-P2, E-P3, PEN-F, E-PL7, E-PL8, E-PL9, E-M, OM-D, E-M1 MarkII, E-M5, E-M5 Mark II, E-M10, E-M10 Mark II, E-M10 Mark III, Panasonic Lumix DMC-G1, G2, G3, G9, G10, GX1, GH1, GH2, GF1, GF2, GF3, GF5, GH4, GH5, GH5s, GX85, GX7; Panasonic AG-AF100 Mirrorless Digital Cameras, Black Magic Pocket Cinema Camera (BMPCC).