If you have a SLR or DSLR camera and other maker/mount lenses, the Fotodiox Mount Adapters allow you to use your lenses on the film/digital camera body. Sharing lenses has some distinct advantages. Certain prime lens just can't be replaced, and you save the cost of purchase on new lenses. Adapting larger format lens to smaller format sensors (i.e.: large format to medium format, medium format to 35mm, 35mm to micro 4/3) provides excellent edge-to-edge sharpness. The smaller image field helps minimize the effects of lens distortion and aberration by using the 'sweet spot' or center of the larger lens image circle.This Fotodiox lens mount adapter is made with high standard precision. It?s all metal design and polished surface is designed to guarantee smooth mounting and long lasting experiences. It allows new and old Canon FD & FL Lenses to fit on a Sony E-Mount system camera body. The adapter allows the lens to shift 10mm in each direction and rotate 360 Degree, shifting in all directions.Although the lens will fit physically, automatic diaphragm, auto-focusing, or any other functions will not operate correctly while using this adapter. In this case "stop-down mode" will need to be used when metering since the lens does not have the ability to have its aperture controlled by the camera body. You can shoot with manual mode or aperture priority mode. Infinity focusing is allowed.Compatible Cameras (Including, but not limited to):Sony NEX-3, NEX-5, NEX-C3, NEX-5N, NEX-7, NEX-F3, NEX-5R, NEX-5T, NEX-6, a5100, a5000, a6000Sony NEX-VG10, NEX-VG20, NEX-VG30, NEX-VG900, NEX-FS100, NEX-FS700, NEX-EA50, QX1Note - Full frame cameras such as the Sony ?7, ?7r, ?7s will physically fit, however the lens image circle is not large enough to fully cover the sensor while shifting.Actual product packaging and contents may differ from image shown due to packaging or product updates by manufacturer.