Brand New, OE replacement: UAC branded Compressor Kit | Premium ISO/TS 16949 quality; tested to meet or exceed OEM specifications | Includes: compressor & clutch, drier / accumulator, expansion device, 8oz bottle of PAG oil, seal kit; compressor may come charged with shipping oil to keep the part lubricated during transit - drain and replace according to your system's requirements

Compatible Models: Raspberry Pi 5 / 4B / 3B+ / 3B / 3A+ / 2B / 1B+ / 1A+ / Zero 2 W / Zero W / Zero (Note: NOT compatible with 500 / 400, which only supports USB cameras) | Detailed Tutorial: Provides step-by-step guide to show you how to use (The download link can be found on the product box) (No paper tutorial) | Camera Parameters: 5 megapixels (2592 x 1944 pixels), 62° field of view, 1080p 30fps, 720p 60fps video modes | Adjustable Holder: Allows you to easily adjust the camera to the most suitable angle | Get Support: Our technical support team is always ready to answer your questions

Compatible models -> Freenove ESP32 / ESP32-S3 series. (Note: Boards from other brands are not compatible due to different pinout.) | GPIO status LED -> LED on if GPIO outputs/inputs high level, LED off if GPIO outputs/inputs low level. | Independent LED -> The status LED is driven by the chip instead of the GPIO so the GPIO will not be affected. | Power circuit -> Provide multiple 5V and 3.3V power outputs. (5V output up to 3A with external power supply.) | Terminal block and header -> Connect to all GPIO headers of Raspberry Pi Pico, 2.54mm / 0.1in pitch.

Compatible models -> Raspberry Pi 5 / 4B / 3B+ / 3B / 3A+ / 2B / 1B+ / 1A+ / Zero W / Zero. (Note: NOT compatible with Raspberry Pi 400.) | GPIO status LED -> LED on if GPIO outputs / inputs high level, LED off if GPIO outputs / inputs low level. | Independent LED -> The status LED is driven by the chip instead of the GPIO so the GPIO will not be affected. | Terminal block and header -> Connect to all pins of Raspberry Pi's 40-pin GPIO header, 2.54mm / 0.1in pitch. | GPIO name -> The BCM numbering name of each GPIO is printed next to the port.

Compatible models -> Raspberry Pi Pico / Pico H / Pico W. (NOT included in this product.) | GPIO status LED -> LED on if GPIO outputs/inputs high level, LED off if GPIO outputs/inputs low level. | Independent LED -> The status LED is driven by the chip instead of the GPIO so the GPIO will not be affected. | Terminal block and header -> Connect to all GPIO headers of Raspberry Pi Pico, 2.54mm / 0.1in pitch. | GPIO name -> The name of each GPIO is printed next to the port.

386 Items in Total: This complete kit includes the most components, modules, sensors and other items compatible with the Raspberry Pi (Raspberry Pi NOT included) | 5 Sets of Codes: 51 Python codes (compatible with 2&3), 46 C codes, 27 Java codes, 25 Processing codes and 15 Scratch codes (Processing and Scratch codes provide graphical interfaces) | 1170-Page Detailed Tutorial in Total: Provides step-by-step guide with basic electronics and components knowledge (The download link can be found on the product box) (No paper tutorial) | 164 Projects from Simple to Complex: Each project has schematics, wiring diagrams, complete code and detailed explanations | Compatible Models: Raspberry Pi 5 / 400 / 4B / 3B+ / 3B / 3A+ / 2B / 1B+ / 1A+ / Zero 2 W / Zero W / Zero (400 and Zero series not compatible with camera and speaker)

ESP32-S3-WROOM -> A powerful and small controller with onboard camera and wireless. | 1GB Memory Card -> Can be inserted into the ESP32-S3 board to store files. (Included in this kit.) | 2 tutorials with MicroPython and C code -> The download link can be found on the product box. (No paper tutorial.) | Example projects -> The tutorial will show you several typical projects with code and explanations. | Easy to use -> Just connect it to your computer (installed IDE and driver) with a USB cable to program it.

ESP32-WROVER: Dual-core 32-bit microprocessor up to 240 MHz, 4 MB Flash, 8 MB PSRAM, onboard 2.4 GHz Wi-Fi and Bluetooth 4.2 (LE), camera | Detailed Tutorial: Provides step-by-step guide and several typical projects (The download link can be found on the product box) (No paper tutorial) | 2 Sets of Codes: MicroPython and C, two popular programming languages | Easy to Use: Just connect the board to your computer (installed IDE and driver) with the USB cable to program it | 1GB Memory Card: Can be inserted into the ESP32 board to read and write files (Included in this kit)

LCD 1602 -> Can display 2 lines of characters, 16 for each. | New model -> Integrate the conversion circuit on the screen. | I2C address -> 0x3F for 8574AT chip; 0x27 for 8574T and blank chip. (Refer to "About_I2C_Address.pdf" in downloaded file for details.) | Demo project -> For mainstream models of Arduino / Raspberry Pi / Raspberry Pi Pico / ESP32 / ESP8266. | Tutorial and code -> The download link can be found on the product box. (No paper tutorial.)

238-page detailed tutorial (including basic electronics and programming knowledge) -> The download link can be found on the product box. (No paper tutorial.) | 46 interesting projects -> Each project has circuit diagrams and verified code with detailed explanations. | Simple wiring -> It only takes a few seconds to switch between different circuits without complicated wiring. | Extra advanced projects -> Make virtual instruments (voltmeter, oscilloscope) and game consoles. | Get support -> Our technical support team is always ready to answer your questions.

Raspberry Pi Pico: A tiny, fast, and versatile board built using dual-core Arm Cortex-M0+ processor (Comes with pinout card and stickers) | Detailed Tutorial: Provides step-by-step guide with MicroPython, C and Processing (Java) Code (The download link can be found on the product box) (No paper tutorial) | Example Projects: Each project has schematics, wiring diagrams, complete code and detailed explanations (Need extra items) | Easy to Use: Just connect the board to your computer (installed IDE) with the USB cable to program it E | Get Support: Our technical support team is always ready to answer your questions

ESP32-WROVER: Dual-core 32-bit microprocessor up to 240 MHz, 4 MB Flash, 8 MB PSRAM, onboard 2.4 GHz Wi-Fi and Bluetooth 4.2 (LE), camera | 3 Sets of Codes: MicroPython, C and Processing (Java), Processing codes run on computers to provide graphical interfaces | 795-Page Detailed Tutorial in Total: Provides step-by-step guide with basic electronics and components knowledge (The download link can be found on the product box) (No paper tutorial) | 240 Items for 122 Projects: Each project has schematics, wiring diagrams, complete code and detailed explanations | 1GB Memory Card: Can be inserted into the ESP32 board to read and write files (Included in this kit)

3 tutorials -> MicroPython, C and Processing (Java). | 687-page detailed tutorial (including basic electronics knowledge) -> The download link can be found on the product box. (No paper tutorial.) | 224 items for 112 interesting projects -> Each project has circuit diagrams and verified code with detailed explanations. | Raspberry Pi Pico W -> A tiny, fast, and versatile board built using dual-core processor with wireless LAN. (Included in this kit.) | Get support -> Our technical support team is always ready to answer your questions.