✪ 22pin(7+15) Sata Male to Female DATA and Power Combo Extension Cable:can extension of a SATA data and power interface and can be used to connect different devices with a 22 pin SATA connector.And can both power and high speed transmission. | ✪ 15+7 pin sata hdd extension cable:One side is the male head,the other side is the female head.The Slimline SATA cable,you can use this wire, directly connected to the device and the hard disk.Such as SATA (serial) hard drives and SATA optical drives,SSHD,etc. | ✪ SATA data & power 2-in-1 Extension Cord:The length is 30CM,thin and flexible cabling allows easy routing. The flat SATA data cable has a soft sheath and can be installed effectively and organized in a compact computer case. The power cord is covered with an insulated braided sheath, which does not generate heat during used. | ✪ 22 Pin SATA Data and Power Extension Cable:SATA 3.0 theoretically maximum Data transfer rate is 6Gbps.The actual transmission speed is about 600MB/S（Theoretical 6Gbps/8=768MB/S） | ✪ TECHNICAL HIGHLIGHTS:The cable female connector with iron buckle shrapnel,which can be firmly buckled after installation to avoid loose connection and various computer failures caused by vibration.

✪ 22pin(7+15) Sata Male to Female DATA and Power Combo Extension Cable:can extension of a SATA data and power interface and can be used to connect different devices with a 22 pin SATA connector.And can both power and high speed transmission. | ✪ 15+7 pin sata hdd extension cable:One side is the male head,the other side is the female head.The Slimline SATA cable,you can use this wire, directly connected to the device and the hard disk.Such as SATA (serial) hard drives and SATA optical drives,SSHD,etc. | ✪ SATA data & power 2-in-1 Extension Cord:The length is 50CM,thin and flexible cabling allows easy routing. The flat SATA data cable has a soft sheath and can be installed effectively and organized in a compact computer case. The power cord is covered with an insulated braided sheath, which does not generate heat during used. | ✪ 22 Pin SATA Data and Power Extension Cable:SATA 3.0 theoretically maximum Data transfer rate is 6Gbps.The actual transmission speed is about 600MB/S（Theoretical 6Gbps/8=768MB/S） | ✪ TECHNICAL HIGHLIGHTS:The cable female connector with iron buckle shrapnel,which can be firmly buckled after installation to avoid loose connection and various computer failures caused by vibration.

✪ Guitar Effect Pedal Power Daisy Chain Cable:9V DC Guitar Effect Pedal Power Daisy Chain Cable:If you ran short of 9v ports on the power supply for all the pedals on your new board . This cable can help you with your power supply shortage to get more pedals on the board powered up. Definitely a must-have for your pedal board. | ✪ Right angle Splitter Cable :DC5.5 x 2.1mm elbow connector.The connector holds the plug from the supply precisely and firmly, and right-angle plugs fit in the different effects perfectly.Making your board neat and tight. | ✪ Perfect Length:.Daisy Chain Power Cable length is around 1.8 Ft.The distance between each plug is up to 0.82 ft,functioned flawlessly,which makes it easy and convenient to connect pedals on your board. | ✪ The GELRHONR DC power cable Splitter: 9V DC chain 2 plug power cable splits your 1-way power supply into 2 ways. For most brands of guitar effects pedals It's quite rare to see guitarist putting only 1 pedal onto their board. You need to split that power! | ✪ Please Note:This daisy chain cable is universal.The cable is designed for 9 volt pedals, negative tip.Please make sure your your power supply adapter has enough voltage and electric current to support all the pedals that will on at the same time.Or you can chose the the line then selected the pedals with the least power draw keeping it under 100ma total ( mini tuner and mini signal booster) and daisy chained those.

✪ With this IDE conversion card, the laptop's 44-pin 2.5-inch IDE hard disk can be convert to the 40-pin 3.5-inch IDE port on the desktop PC motherboard.Put the 3.5-inch hard disk on the desktop and install the system and then reinstall it on the laptop.Or back up the laptop data on the desktop PC. | ✪ If your laptop system is often broken, then you have to remove your laptop's hard drive, put it on your PC, and do a GHOST backup, so that when the system has a problem, it can be restored.This IDE conversion card is suitable for maintenance personnel system reinstall, backup data, clone systems and other operations.That also can use laptop hard disk as desktop hard disk of course, which is convenient for future updates and upgrades! | ✪ Convert a notebook hard drive into a desktop hard drive.Perfect to retrieve your data and prefer notebook hard drive in your desktop system. | ✪ Correct connection: The front side of the laptop hard drive (sticker side) is aligned with the front side of the IDE conversion card (indicator side).If the reverse connection indicator does not light up, please turn off the power immediately and reconnect correctly! | ✪ For All Laptop 2.5" IDE hard drives such as Compaq, Acer, Toshiba, Dell IBM, Fujitsu, Sony and more. Note: The power supply must be connected! Ensure sufficient power supply

✪ 4 Pin IDE to 5 x 15 Pin SATA Power Y-Cable Adapter Splitter:Converts one 4pin plug into 5 x 15-pin SATA adapter,to solve the situation of insufficient SATA connector. | ✪ This is a quite useful product when faced with not enough SATA power connectors, but an over-abundance of 4-pin connectors. Upgrades your PC, adding more SATA ports,for faster SATA hard drives/optical drives(Hard Drives, DVD-ROMs) or devices (video cards, fans etc.) | ✪ FLEXIBLE CABLE:The sata cable is parallel design ,neat and flat.Easily add this cable adapter to your computer case, do not cover the network and not spread, the wire clean with convenient wiring perforation. | ✪ PRODUCT ADVANTAGE:The sata adapter cable is formed at one time,no degumming,and no burrs.Strong toughness and wear resistance.The interface is designed according to the standard,easy to plug and unplug.High speed to transfer dataThe contact has good contact and will not cause poor contact. | ✪ Be note:The 4pin IDE Male 1 to 5 Female SATA 15pin Splitter cable was only designed for the devices with SATA port, not compatible with other ports. If you connect it with other incompatible devices, it will definitely burn or damage the components . Please carefully check the device's port or contact us before you purch it.

✪ M.2 NGFF to PCI-E 4X adapter can use the M.2 NGFF interface conversion to ordinary PCI-E X4 interface,It also support 1x interface.Adopt horizontal small 4PIN power supply interface to effectively avoid interference with PCI-E equipment after power cord is inserted. | ✪Applicable SSD Hard Drive:NGFF M.2 SSD M Key to PCI-e adapter ONLY supports PCI-e based M Key.Suitable for PCIe x4/ x8/ x16 slot. | ✪Support Systerm:The NGFF to PCI-E x4 M.2 Key Adapter supports Windows, M/ac/Linux OS ,no driver required. | ✪ Card length: 80mm or 60mm, according to The length of your machine inside the card slot can be broken positioning.You can remove the card top (20mm) to fit in different card slot（22 * 60 mm, 22 * 80 mm） | ✪ Easy to install:NGFF M2 to PCI-e x4 Slot Riser Card comes with a power cable, a screwdriver and a screw.Easy to install.No drivers needed.You can use the included tools to complete the installation.

【SATA 15Pin male to 2ports 15Pin female】 SATA15pin one-to-two power cord, dual-interface output, supports simultaneous connection of two hard drives or optical drives.Serial ATA extension cord whose main function is to transfer data between the motherboard and a large number of storage devices (such as hard disks and optical drives) | 【EXTENDING THE INTERFACE】The SATA cable for port power is not long enough and the interface is insufficient. There is no need to modify the original power interface, and the power warranty is not damaged. A single port can be changed to multiple ports, and multiple devices can be connected at the same time. Two hard drives can be connected when installed in the chassis, and the data can be read easily and quickly, achieving the effect of dividing into two | 【PROTECTION DEVICE NATIVE INTERFACE】Transfer the device plugging and unplugging interface to the power cord, avoiding interface damage caused by repeated plugging and unplugging, and effectively protecting the device.The length is about 20cm, is convenient for PC case internal wiring and keeping the tidy and clean. It is also very suitable for expansion from inside to outside | 【PRODUCT ADVANTAGES】 Using 18AWG national standard thickened pure copper wire,the interface is formed at one time,no degumming,and no burrs.Strong toughness and wear resistance.The interface is designed according to the standard,easy to plug and unplug.The contact has good contact and will not cause poor contact | 【PACKAGE INCLUDES】3pcs 15 Pin SATA Male to 2 x 15 Pin Female Y splitter power cable

✪ USB C Splitter 1 to 2 Adapter: USB C to 2 USB C Female Adapter provides two USB-C ports(USB3.1 and USB 2.0), Allows you to charging (USB3.1 support 100w)/data transfer USB C device at the same time. | ✪ 10Gbps Support 4K@60Hz Video & Audio Transmission:The C Splitter does support for monitors,but only support one Video outputs(the USB3.1 port,USB2.0 not).You can mirror or extend smartphone/laptop with USB C port to TV/PC Monitor/Projector which has USB C port.Give you clear and vivid 4K@60Hz high resolution.(Note: Please check if your device's USB-C port Support Video and Audio Output) | ✪ 10Gbps Fast Transfer and Data Sync (OTG):The USB Type C magnetic adapter support multi-tasking,meets the USB 3.1 GEN 1 standard.Supports data transfer up to 10Gbps(theoretical transmission speed),another USB C just support USB2.0(480Mbps)OTG function allows you to connect external USB hard drive without installing any additional software. Please make sure your device supports OTG. | ✪ 2 Devices Simultaneous Charging:This usb c splitter provides 2 USB-C ports so that you can easily connect 2 USB-C devices charging at the same time.Do not support Audio/Earphone & microphone signals. | ✪ Easy to carry:Occupies very little space and compact enough to carry it everywhere.Easy to keep it in the car or even in your wallet, ready to use when needed or travel.

✪ The passive POE adapter cable is used with a POE switch. Transforms Non POE devices to POE enabled.It is designed to make it easier for network cameras to use POE functionality,saving wiring costs. | ✪APPLICATION:POE-Splitter 12v Passive Power Over Ethernet Adapter POE Cable Splitter Injector For IP Camera DC Male and Female.Widely used for WLAN, routers, switches, internet telephony, security monitoring. | ✪ High Materials: This POE Splitter made of ABS plastic and Copper core Wire.Pure copper core have the superior transmission performance, little influence on video signal even under distant transmission. | ✪ Easy to use:Plug and play without extra setting.The passive power over Ethernet RJ45 POE adapter cable supports networks with 10/100 Mbit/s. | ✪ Note:If your POE switch voltage more than 15V, please reduced voltage first and then use the this POE splitter together, otherwise it may burn the devices or other load equipment.