DC 1 female to 5 male splitter cable is a convenient and economical way to power 5 CCTV security cameras / LED strips with 1 power adapter (this cable only be used for power supply and does not support data transmission) | Note: this cable only work with power adapter with 5.5mm x 2.1mm plug. Total current of the equipment should not exceed 8A, total power should not exceed 90W | GINTOOYUN DC 5.5mm x 2.1mm splitter cable total length is 0.7m. Main cable: 0.3m 18AWG 1-8A. Branch cable: 0.4m 20AWG 1-5A | 12V DC power extension adapter cable, inner core copper wire,it has lower resistivity and better conductivity | DC splitter cable's PVC sheath can protect internal conductor and provide flexibility for flexible cord to ensure long life

Right Angle Male to Male DC 5525 Power Extension Cable cable is suitable for any device requiring a power adapter with a 2.5mm x 5.5mm plug to extend or replace a damaged power cable | Right angle DC5525 male to male power cable uses a 90-degree design, which can better manage the DC power cord in some cases, especially in small corners. And to protect the DC power port of the device from damage caused by frequent plugging and unplugging | Widely used in 0-12v equipment, such as surveillance cameras,LED lights with monitoring equipment printers. The maximum load current does not exceed 2A | Double elbow DC5525 male to male Coiled cable, stretchable, maximum length is about 0.8M, minimum length is about 0.25M, light weight, easy to carry | Double elbow DC5525 male to male Coiled cable, stretchable, maximum length is about 0.8M, minimum length is about 0.25M, light weight, easy to carry

【DC5521 Male to Female Power Extension Cable】For any applications that requires DC input and accept 2.1mm x 5.5mm plug (Does not work with other size) | 【DC12V cable】DC5521 cable is suitable for 0-12V equipment.Such as ED light bars, LED signs, CCTV surveillance cameras, automotive electrical appliances, automotive amplifiers, automotive wiring harnesses, circuit boards, etc. | 【3FT DC5521】The DC power cord is 1m long (about 3FT),which is enough to complete most of the projects.The wiring is simple and easy to use. | 【Safe and durable】PVC sheath can protect internal conductor and provide flexibility for flexible cord to ensure long life. It is light weight and easy to carry | 【Note】this cable contains only two wires, which can only be used for power supply and does not support data transmission

DC Y splitter cable uses one power adapter to power two cameras/light strips,which is convenient and cost-effective(Note:cable will only work with power adapter with 5.5mm x 2.1mm plug) | Widely used in surveillance cameras, especially for for home security camera surveillance system, and other low-voltage DC electrical equipment,car/CCTV Equipment | DC power extension adapter cable without welding, plug and unplug, easy to use, plug and play | PVC sheath can protect internal conductor and provide flexibility for flexible cord to ensure long life.Light weight and easy to carry | DC power extension cable is made of pure copper material,it has lower resistivity and better conductivity

【1 to 2 Design】DC splitter cable 1 female to 2 male can power up 2 security cameras with 1 power adapter, it can save cost and convenient | 【Widely Used】DC5521 1 female to 2 male extension cable used for home security camera surveillance system, and other low-voltage DC electrical equipment,car/CCTV equipment | 【304 Switch Design】 It can turn your device on or off quickly and convenient, strong, electric shock proof, safe and durable | 【Connectors】Connector 1: DC 5.5mm x 2.1mm female. Connector 2: Dual DC 5.5mm x 2.1mm male. Main cable: 18AWG. Branch cable: 20AWG. Cable length: 0.4m/1.3ft/15.7inch | 【Material】Inner core copper wire, good conductivity, low resistance, strong current load capacity. PVC sheath, which is soft and durable

Connector 1: (1) 4-pin Molex (LP4) Male; Connector 2: (3) 4-pin Molex (LP4) Female | This 4-pin peripheral molex extension cable allows you to extend the 4-pin power from your ATX power supply to your 4-pin IDE drives and other devices. | Molex y splitter cable is made of pure copper and high grade plastic, which can make a solid power connection to hard drives durable, and has a long service life. | Molex 4 pin power Y splitter cable can turn 1 LP4 power port to 3 when the power supply shortage, provides a convenient solution for adding more connections to an existing power supply with limited LP4 power ports. | Easy to install, plug and play without installing any driver. The flexible and sturdy cable is able to add another hard drive simply and quickly, the extend design can make for better cable management in tight spaces and makes the computer case more tidy.

The pci-e riser cable 1x have extremely fast graphic data transmission，high frequency support PCIe 3.0 stable transfer.Supports high speed PCI-E 1X, 4X,8X and16X card, but work at 1X speed only | PCI-Express 3.0 1X Extension Cable utilize high quality flexible cable which is extremely soft and compact.Experienced design and durable material for High frequency and low attenuation | High Speed flexible cable is for 1U,2U chassis.The PCI-E 1X extension card allows you to make your PCI-E 1X movable and no longer needs to be permanently fixed on the motherboard. The originally fixed interface can be installed at any position. | PCB-Swaddled and fixed with Bolts and nut to prevent tearing and short circuit for PCB-Cable solder points.Gold plated contacts for best connectivity and long life | wire core adopts pure copper tin plating process to ensure full-speed signal transmission, shielding layer adopts TPE plastic sleeve and PE insulation layer to ensure electromagnetic interference of signals during transmission

AV to VGA adapter: supports three kinds of input (S-VIDEO, RCA VIDEO, VGA) to VGA output conversion. It can be used as a monitor to watch online video, play games or browse the web through TV | Support DVD, DVR, TV, STB or host to transmit video for display on PC, VGA monitor or LCD | Support 1080P: Support switching resolution between 600 * 800 and up to 1920 * 1080, compatible CRT monitor and LCD monitor | Scanning frequency enhancement technology, the refresh rate can be switched between 60Hz-75Hz, the image is flicker-free, 3D image noise reduction function makes the picture clearer and more stable | Plug and play, installation takes only a few seconds, no need to set up, easy to use. Small size and easy to carry

【DC5521 Male to Right Angle Male】DC plug size: 5.5mm x 2.1mm,outer diameter 5.5mm, inner diameter 2.1mm.Connector1: DC5521 male head.Connector2: DC5521 male right angle head | 【DC12V cable】DC5521 male power cable is suitable for 0-12V equipment.Such as strip lihgt, CCTV surveillance cameras, automotive electrical appliances, automotive amplifiers, circuit boards, etc | 【Note】This DC plug power cable only be used for power supply and does not support data transmission | 【Safe and durable】PVC sheath can protect internal conductor and provide flexibility for flexible cord to ensure long life. Light weight and easy to carry | 【1.6FT DC5521】The DC extension cord is 50cm long (about 1.6FT),which is enough to complete most of the projects.Wiring simple and easy to use

The SD Card to 2.5 Inch IDE Adapter Adapt SD/MMC flash memory card to a super compact, SD card has the characteristics of small size, large capacity, anti-seismic and moisture-proof, high-temperature resistance, stable performance, permanent and effective data storage, no noise, no seek error. | Enables IT engineers and embedded technology enthusiasts to use SD/MMC card as a normal IDE 2.5" hard disk. Ideal for some devices that required a fast and easy bootable device such as POS. Be a SD/MMC card reader/writer.Compatible with SD, SDHC, SDXC & MMC specification. | Supports PIO, Multi-Word DMA and Ultra DMA data transfer mode.Supports boot function.No external power required and powered from IDE interface.Easy installation and no driver required.Mini board design and no space wasted. | Enables SD/MMC card as a normal IDE 2.5" hard disk,Provides an alternative for data storage and transfer or test for motherboard, sound/audio/memory card, etc. | NOTE: This adapter does not support hot-swap of CF cards, so please turn off power when changing cards.

SD to 3.5" 40Pin IDE Adapter,Convert SD, SDHC, MMC to an IDE-compatible hard drive.Support PIO, multi-word DMA and super DMA data transmission mode. high-temperature resistance, stable performance, permanent and effective data storage, no noise, no seek error.Ideal for some devices that required a fast and easy bootable device such as POS. | Enables IT engineers and embedded technology enthusiasts to use SD/MMC card as a normal IDE 3.5" hard disk.Provides an alternative for data storage and transfer or test for mainboard, sound card, display card and memory card, etc. | Compatible with SD Memory Card specification 1.1, MMC specification 2.0, SDHC Memory Card. SD socket support maximum 32GB SDHC card Support PIO, Multi-Word DMA and Ultra DMA data transfer mode. Compatible with DOS, Windows 98SE, Me, 2000, XP and Vista & Linux. Bootable, install OS and application on SD card. | Easy installation and no driver required.Mini board design and no space wasted. Ompatible with MMC system specification 2.0 , SD Memory Card specification 1.0, SDHC Memory Card. | Attention: Some of the mother board required to enable LBA mode and disable DMA transfer mode.

VGA to RCA adapter is a portable computer to TV converter, suitable for TV standards in all countries/regions in the world. It can convert the signal output by the computer into a signal that the TV can accept. Functions include video conversion, independent horizontal/vertical position adjustment, computer and TV simultaneous display, etc. Support resolution 640x480 up to 2560x1600. | Converter can easily help you convert VGA signal to Video / S video. In this way, the movies you download from the Internet can be completely merged into the home theater, and you can easily experience the theater effect.(Note: The converter is mainly used to convert image movies, it cannot output channel signals and no audio passes through). | Adjust and set preferences through screen display and front control panel, support video standards: NTSC / NTSC-EIAJ / PAL / PAL-M / PAL-N, no driver required. Compatible with Windows and Macintosh operating systems. The display mode supports composite video, S-video output, position adjustment, magnification 2 times, and simultaneous display on monitor and TV. | Plug and play, installation only takes a few seconds, plug in and work, easy to use. The standard VGA output can be used with most monitors, projectors, TVs and other display devices. | It uses USB port or keyboard port for power supply (power supply: DC 5V 1A), plug and play installation is simple, compact and simple structure, easy to carry.

It is the right angle riser for the PCI Express X16 buses. The connector is soldered on the component side (B side) of the board.This x16 PCI Express Riser Card lets you install a full-sized PCI Express card in a 1U or 2U server case, eliminating the expense of purchasing small form factor PCIe cards | The PCI-Express 16X Riser Card makes the PCI-Express Card away from motherboard. With the PCI-Express socket directly in line with the socket on the motherboard . When an I/O board is inserted, the component side of the I/O board will face down, towards the motherboard. | High Quality Solder Points and Gold plated Contacts for the better connectivity and Long Use. EMI shielded design can reduce electromagnetic interference and provide good transmission efficiency，Achieve high frequency and low attenuation. | Supports high speed pcie 3.0 16X card.Stable pcie Gen3 8Gbps or higher with high quality axial cable. Plug and play,no driver needed. | PCI-E 3.0 x16 128Gbp/s BANDWIDTH - Deliver all the performance of PCIe 3.0 to your GPU. Support GTX1080, GTX1080Ti, RTX2060, RTX2070, RTX2080, RTX2080Ti, RX570, RX580, RX590, RX5700 XT, RX VEGA 56, RX VEGA 64 etc, support for all graphics cards produced after 2015.