OLED Touchscreen Screen: With High Definition OLED touchscreen, Godox X3-O offers a high contrast display and fast refresh rate for better experience. Easy to adjust the brightness of the screen in bright sunlight or low-light conditions, perfect for indoor and outdoor shots. There's also a screen lock to prevent unintentional touches.For those cold shoots with gloves, effortlessly adjust parameters through buttons on the side | Built-in Li-Ion Battery: It can be charged from 0% to 100% in 2 hours via the USB-C port, and firmware updates can also be performed via the USB-C connection | New update Hot-shoe: With new update Durable Hotshoe you can install the trigger easier and faster. The easy-mounting hotshoe ensures trouble-free mounting, so you can focus on your shot, not the setup | Spare Channel Scanning: Utilizing the advanced 2.4GHz Godox Wireless X system, operating distance can reach up to 100 meters. the spare channel scanning function prevents interference from other users operating on the same channel | Support TTL Autoflash: 1/8000s High-Speed Sync, Manual Flash, Flash Exposure Compensation, TCM Function, Modeling Lamp Control, Zooming setting, Screen brightness, Screen lock | Godox X3-O TTL Wireless Flash Trigger Compatible with Olympus E-P3 E-PL5 E-M1 Compatible with Panasonic DMC-G85, DMC-GH4, DMC-GF1

Wireless Connection: Utilizing GODOX 2.4G X system, Godox X3O trigger enables quick connection to Godox flash devices, the wireless sync function helps to quickly set up wireless channels and identification numbers; The spare channel scanning function prevents interference from other users operating on the same channel | Lithium Battery, Quickly Charge: Godox X3 trigger Built-in 3.7V 850mAh rechargeable lithium battery, save the trouble of buying batteries, with the USB-C port, the X3 trigger swiftly charges from 0% to 100% in just 2 hours. Additionally, firmware updates can also be performed through the USB-C connection | High-Definit OLED Screen: With definition OLED touchscreen, Godox X3 olympus trigger offers a high-contrast display and rapid refresh rate for better experience, Perfect for indoor and outdoor shooting; whether it's bright sunlight or low-light conditions, adjust screen brightness by sliding left or right to suit your surroundings. There is also a screen locking function to prevent inadvertent touch, adding an extralayer of convenience | Stylish, Full Touch Screen: Godox X3-O flash trigger adopts a full-color touch screen, the sleek and pithy Ul allows you to easily switch or toggle settings and modes through the touch screen, and has a humanized interaction logic a main interface can be viewed and adjusted in multiple groups of parameters, which greatly improves the work efficiency | Easy Mounting, Durable Hotshoe: Elevate your photography experience with the X3's robust hotshoe designed for seamless mounting and optimal camera hotshoe protection. Say goodbye to installation hassles. the easy-mounting hotshoe ensures trouble-free mounting, so can focus on your shot, not the setup | Humanized Design: X3 wireless flash trigger comes with a TCM conversion function that lets you quickly switch between the efficiency and convenience of TTL auto flash mode and the precision and detail of manual flash mode; For those cold shoots with gloves, effortlessly adjust parameters through buttons on the side

Application: Godox X3-O Flash Trigger for OM SYSTEM Cameras (TTL autoflash). For Olympus Panasonic Cameras | Seamless Connection: Utilizing the advanced 2.4GHz Godox Wirelessx system, the X3 enables effortless and reliable management of your Godox lighting setup.The spare channel scanning function prevents interference from other users operating on the same channel. A noteworthy feature is the Wireless Sync. Seamlessly connect the X3 to our upcoming retro camera flash with just one tap | Precision at Your Fingertip: Experience seamless versatility with the X3's two-way TCM, allowing for instant and effortless conversion between TTL mode and Manual Mode. Enjoy the convenience of swift transitions, giving you the flexibility to adapt to different shooting scenarios with ease | Your Shots, Your Way: With X3, take control of your shots in away that suits your needs.Choose between the intuitive touch screen or the tactile feel of real buttons.The ultra-sleek and efficient Ul allows you to easily switch or toggle settings and modes through the touch screen. For those cold shoots with gloves, effortlessly adjust parameters through buttons on the side | Easy-Mounting, Durable Hotshoe: Elevate your photography experience with the X3's robust hotshoe designed for seamless mounting and optimal camera hotshoe protection. Say goodbye to installation hassles. The easy-mounting hotshoe ensures trouble-free mounting, so you can focus on your shot, not the setup | High-Definition OLED Screen: With its vivid OLED touchscreen, X3 offers a high-contrast display and rapid refresh rate for an incredible viewing experience. Perfect for both indoor and outdoor shooting, effortlessly adjust screen brightness by sliding left or right to suit your surroundings, whether it's bright sunlight or low-light conditions

【High-Definition OLED Screen】With its vivid OLED touchscreen, X3-S offers a high-contrast display and rapid refresh rate for an incredible viewing experience. Perfect for both indoor and outdoor shooting, effortlessly adjust screen brightness by sliding left or right to suit your surroundings, whether it’s bright sunlight or low-light conditions. There is also a Screen Locking function to prevent inadvertent touch, adding an extra layer of convenience. | 【Just Swipe and Tap】Feel the ease of control at your fingertips. Navigate effortlessly through the X3’s user-friendly interface with a simple swipe and tap. Like other Godox flash triggers, X3 supports TTL and multiflash mode, as well as HSS, front curtain sync, and rear curtain sync. Elevate your workflow with intuitive control and versatile flash modes. | 【Quick Charge, Always Ready】Equipped with a built-in rechargeable lithium battery, X3 offers hassle-free power on the go. With the USB-C port, the X3 swiftly charges from 0% to 100% in just 2 hours, ensuring you’re always ready to capture the moment. Additionally, seamless firmware updates can also be performed through the USB-C connection. | 【Easy-Mounting, Durable Hotshoe】Elevate your photography experience with the X3’s robust hotshoe designed for seamless mounting and optimal camera hotshoe protection. Say goodbye to installation hassles. The easy-mounting hotshoe ensures trouble-free mounting, so you can focus on your shot, not the setup. | 【Precision at Your Fingertips】Experience seamless versatility with the X3’s two-way TCM, allowing for instant and effortless conversion between TTL mode and Manual Mode. Enjoy the convenience of swift transitions, giving you the flexibility to adapt to different shooting scenarios with ease. Whether you prefer the simplicity of TTL mode or the precise control of Manual Mode, the Xnano empowers you to switch between them quickly.

【Born for Professionals】Completely redefining the wireless flashtrigger landscape, we proudly present X3.a groundbreaking minimalistic TouchscreenTTL Wireless Flash Trigger designed to elevate your work flow to unprecedented heights. | 【Just Swipe and Tap】Feel the ease of control at your fingertips.Navigate effortlessly through the X3's user-friendly interface with a simple swipe and tap. Elevate your work flow with intuitive control and versatile flash modes. | 【High-DefinitionOLED Screen】With its vivid OLED touch screen, X3 offersa high-contrast display and rapid refresh rate for an incredible viewing experience. Perfect for both indoor and outdoor shooting,effortlessly adjust screen brightness by sliding left or right to suit your surroundings whether it's bright sunlight or low-light conditions. | 【Precision at Your Fingertips】Experience seamless versatility with the X3's two-way TCM, allowing for instantand effortless conversion between TTL modeand Manual Mode.Enjoy the convenience of swift transitions, giving you the flexibility to adapt to different shooting scenarios with ease. | 【Seamless Connection】Utilizing the advanced 2.4GHz Godox WirelessX system, the X3 enables effortless and reliable management of your Godox lighting setup.The spare channel scanning function prevents interference from other users operating on the same channel. A noteworthy feature is the Wireless Sync. Seamlessly connect the X3 to our upcoming retrocamera flash with just one tap. | 【Your Shots, Your Way】With X3, take control of your shots in away that suits your needs. Choose between the intuitive touch screen or the tactile feel of real buttons.The ultra-sleek and efficient Ulallows you to easily switch or toggle settings and modes through the touch screen.For those cold shoots with gloves, effortlessly adjust parameters through buttons on the side.

✅Godox X3 adopts a full-color touch screen, all parameters can be adjusted by touch, and has a humanized interaction logic a main interface can be viewed and adjusted in multiple groups of parameters, which greatly improves the work efficiency. | ✅HD OLED touch screen with delicate display. The screen brightness can be adjusted by sliding the brightness setting bar left and right to adapt to the needs of the shooting environment; the screen lock function prevents accidental touch during shooting. | ✅X3 trigger comes with a TCM conversion function that lets you quickly switch between the efficiency and convenience of TTL auto flash mode and the precision and detail of manual flash mode. | ✅2.4GHz wireless X system for quick connection to Godox flash devices. The channel scanning function effectively reduces interference and improves shooting stability. In addition, the wireless synchronization function helps to quickly set up wireless channels and identification numbers. | ✅Built-in rechargeable Li-ion battery with a versatile Type-C connector can be fully charged from 0% to 100% in 2 hours to capture moments at any time; you can also use this connector for firmware updates to get the latest features. | ✅Standby time of about 7 days on full charge; about 5000 flashes. save the trouble of buying batteries.

OLED 𝐓𝐨𝐮𝐜𝐡𝐬𝐜𝐫𝐞𝐞𝐧 Screen: With its vivid OLED touchscreen, X3 offers a high-contrast display and rapid refresh rate. Perfect for both indoor and outdoor shooting, effortlessly adjust screen brightness by sliding left or right to suit your surroundings, whether it’s bright sunlight or low-light conditions. Screen Locking function to prevent inadvertent touch. The ultra-sleek and efficient UI allows you to easily switch or toggle settings and modes through the touch screen. For those cold shoots with gloves, effortlessly adjust parameters through buttons on the side. | Lithium Battery, Quickly Charge: Godox X3 trigger Built-in 3.7V 850mAh rechargeable lithium battery, with the USB-C port, the X3 trigger swiftly charges from 0% to 100% in just 2 hours, and firmware updates can also be performed via the USB-C connection | Wireless Connection: Utilizing Godox 2.4G X system, Godox X3S trigger enables quick connection to Godox flash devices, the wireless synchroniz function helps to quickly set up wireless channels and identification numbers; The spare channel scanning function prevents interference from other users operating on the same channel and improves shooting stability.【2.4G Wireless Touchscreen Flash Transmitt | Stylish, Full Touch Screen: Godox X3 sony trigger adopts a full-color touch screen, the sleek and pithy Ul allows you to easily switch or toggle settings and modes through the touch screen, and has a humanized interaction logic a main interface can be viewed and adjusted in multiple groups of parameters, which greatly improves the work efficiency | New update Hot-shoe: Elevate your photography experience with the X3's robust hotshoe designed for seamless mounting and optimal camera hotshoe protection. Say goodbye to installation hassles. the easy-mounting hotshoe ensures trouble-free mounting, so can focus on your shot, not the setup. It's not only compatible with cameras with Sony hotshoe, but also can control camera flashes, outdoor flashes, studio flashes and retro flashes who have equipped with Godox 2.4GHz wireless X systems. The outstanding anti-interference capability, 32 channels together with 99 IDs. | Humanized Design: X3 flash trigger is compact in size and a weight of 1.7oz (48g), supports TTL flash and multiflash mode, as well as HSS, front curtain sync, and rear curtain sync, up to 1/8000s flash sync speed. It comes with a TCM conversion function that lets you quickly switch between the efficiency and convenience of TTL auto flash mode and the precision and detail of manual flash mode; For those cold shoots with gloves, effortlessly adjust parameters through buttons on the side of the X3 flash trigger. | Compatible with Sony series cameras TTL autoflash: Compatible with Sony A7IV, A7C, A7M4, A7R, A7RIII, a77II, a77, a99, ILCE-6000L, a9, a350, DSC-RX10, A6400 etc. | How to change language to English: Swipe down from the top, select the gear icon in the bottom right, scroll down till you see the globe icon and select. You will then have the option to switch to English.

Wireless Connection: Utilizing GODOX 2.4G X system, Godox X3S trigger enables quick connection to Godox flash devices, the wireless sync function helps to quickly set up wireless channels and identification numbers; The spare channel scanning function prevents interference from other users operating on the same channel | Lithium Battery, Quickly Charge: Godox X3 trigger Built-in 3.7V 850mAh rechargeable lithium battery, save the trouble of buying batteries, with the USB-C port, the X3 trigger swiftly charges from 0% to 100% in just 2 hours. Additionally, firmware updates can also be performed through the USB-C connection | High-Definit OLED Screen: With definition OLED touchscreen, Godox X3 sony trigger offers a high-contrast display and rapid refresh rate for better experience, Perfect for indoor and outdoor shooting; whether it's bright sunlight or low-light conditions, adjust screen brightness by sliding left or right to suit your surroundings. There is also a screen locking function to prevent inadvertent touch, adding an extralayer of convenience | Stylish, Full Touch Screen: Godox X3 sony trigger adopts a full-color touch screen, the sleek and pithy Ul allows you to easily switch or toggle settings and modes through the touch screen, and has a humanized interaction logic a main interface can be viewed and adjusted in multiple groups of parameters, which greatly improves the work efficiency | Easy Mounting, Durable Hotshoe: Elevate your photography experience with the X3's robust hotshoe designed for seamless mounting and optimal camera hotshoe protection. Say goodbye to installation hassles. the easy-mounting hotshoe ensures trouble-free mounting, so can focus on your shot, not the setup | Humanized Design: X3 flash trigger comes with a TCM conversion function that lets you quickly switch between the efficiency and convenience of TTL auto flash mode and the precision and detail of manual flash mode; For those cold shoots with gloves, effortlessly adjust parameters through buttons on the side

【Just Swipe and Tap】Feel the ease of control at your fingertips. Navigate effortlessly through the Godox X3's user-friendly interface with a simple swipe and tap. Elevate your workflow with intuitive control and versatile flash modes. | 【High-Definition OLED Screen】Experience the brilliance of the OLED touchscreen on the Godox X3, providing a high-contrast display and a rapid refresh rate for an incredible viewing experience. Ideal for both indoor and outdoor shooting, effortlessly adjust the screen brightness by sliding left or right to suit your surroundings, whether it's bright sunlight or low-light conditions. | 【Precision at Your Fingertips】Seamless versatility is at your fingertips with the Godox X3's two-way TCM. Experience instant and effortless conversion between TTL mode and Manual Mode. Swift transitions provide convenience, offering flexibility to adapt to various shooting scenarios with ease. | 【Easy-Mounting, Durable Hotshoe】Enhance your photography experience with the Godox X3's robust hotshoe, crafted for seamless mounting and optimal protection of your camera's hotshoe. Bid farewell to installation hassles, as the easy-mounting hotshoe guarantees trouble-free setup, allowing you to concentrate on capturing the perfect shot. | 【Seamless Connection】With Advanced 2.4GHz Godox Wireless X System Utilizing the advanced 2.4GHz Godox Wireless X system, the Godox X3 ensures effortless and reliable management of your Godox lighting setup. The spare channel scanning function prevents interference from other users operating on the same channel. A noteworthy feature is the WirelessSync, allowing you to seamlessly connect the Godox X3 to our upcoming retro camera flash with just one tap. | 【Your Shots, Your Way】With Godox X3, take control of your shots in a way that suits your needs. Choose between the intuitive touchscreen or the tactile feel of real buttons. The ultra-sleek and efficient UI allows you to easily switch or toggle settings and modes through the touchscreen. For those cold shoots with gloves, effortlessly adjust parameters through buttons on the side. | 【Quick Charge, Always Ready】Equipped with a built-in rechargeable lithium battery, X3 offers hassle-free power on the go. With the USB-C port, the X3 swiftly charges from 0% to 100% in just 2 hours, ensuring you're always ready to capture the moment. Additionally, seamless firmware updates can also be performed through the USB-C connection.

Just Swipe and Tap: Godox X3S adopts a full-color touch screen, all parameters can be adjusted by touch, including TTL, multiflash mode, HSS, front curtain sync, and rear curtain sync, which greatly improves the work efficiency. | High-Definition OLED Screen: Godox X3 trigger offers a high-contrast display and rapid refresh rate for better experience, Perfect for indoor and outdoor shooting; adjust screen brightness by sliding left or right to suit your surroundingsthe. Screen lock function, prevents accidental touch during shooting. | Quick Charge, Always Ready: Godox X3-S Trigger built-in 3.7V 850mAh rechargeable lithium battery, and With the USB-C port, the X3C swiftly charges from 0% to 100% in just 2 hours. (Note: Wireless Sync will also extend to other Godox lights through firmware updates.) | Seamless Connection: Utilizing GODOX 2.4G X system, Godox X3 S trigger enables quick connection to Godox flash devices. The spare channel scanning function prevents interference from other users operating on the same channel. Note: Wireless Sync Function will also extend to other Godox lights through firmware updates. | Precision at Your Fingertip: X3 comes with a TCM conversion function that lets you quickly switch between the TTL auto flash mode and manual flash mode | Easy-Mounting, Durable Hotshoe: The X3 features a quick release hot shoe design that combines speed and stability when mounting, effectively improving efficiency and safety, thus enhancing your photographic experience.

【Touch Screen Control or Knob Adjustment】--Godox X3 flash trigger for Sony Camera is the upgraded version of Xpro-S and XproII-S trigger,built-in the OLED touchscreen and side rotary knob adjustment,ease of control,just a simple swipe and tap,indoor and outdoor shooting is suitable. | 【TCM Quick Change & Seamless Mounting】--X3 Wireless Flash transmitter provides quick conversion between TTL mode and Manual Mode through a simple swipe.Seamless mounting hotshoe design,Easy-Mounting,Elevate your workflow with intuitive control and versatile flash modes. | 【In 2 Hours Fast Charging】--Equipped with a rechargeable 3.7V/850mAh battery,GODOX X3-S Studio flash trigger with the USB-C port, swiftly charges from 0% to 100% in just 2 hours,Approx 7 Days Standby time offers long time use for your photography. | 【User-friendly Function Settings】--Built-in 2.4GHz wireless X system within 100m,As a TTL wireless flash trigger can fast connect with GODOX camera flashes,studio flashes and outdoor strobe flashes.Designed with the anti-interference channel scanning design, wireless sync function,Zoom Values,screen lock,Auto Off time,etc custom functions. | 【Small Enough,But Powerful Enough】--48g featherweight body size,with TTL,high-speed synchronization function,High-Definition Full-color touch screen is ready to offer a silky smooth touch to your shooting,helps improve your photography efficiency easily.

VERSATILE FLASH TRIGGER FOR CANON--Built-in godox 2 4g wirless x system versatile using methods -can be used as a wireless godox flash trigger/ wireless camera flash trigger/ wireless shutter release trigger | 1/8000S SYNC STUDIO FLASH TRIGGER--Godox Xpro-c supports type-C USB firmware upgrade and wireless triggering by 2.5mm sync cord jack, featuring1/8000s high speed sync.Support TTL auto flash,multi flash, manual flash, TCM transform function,one shoot & multi-shoot setting and more | FULL GRAPHIC DISPLAY--Large dot matrix LCD screen: 16 groups and 32 channels to wirelessly control and trigger. full graphic display of 5 groups simultaneously. Support magnification | WIRELESS FLASH TRIGGER NO INTERFERENCE--01-99 wireless ID: Only achieve triggering when the channels and wireless IDs of The master and slave Unit are set to the fame, Avoiding signal interference effectively | GODOX XPRO FOR CANON CAMERAS-- Compatible with canon camera models including:1Dx mark II,1Dx,5Ds/5Dsr,5DIV,5D Mark III,5D Mark II,5D,7D Mark II 7D 6D 80D,70D,60D,50D,500D 450D,400D Digital,350D DIGITAL,100D,1200D,1000D,1100D,M5,M3

VERSATILE FLASH TRIGGER FOR NIKON--Built-in godox 2 4g wirless x system versatile using methods -can be used as a wireless godox flash trigger/ wireless camera flash trigger/ wireless shutter release trigger | 1/8000S SYNC STUDIO FLASH TRIGGER--Godox Xpro-c supports type-C USB firmware upgrade and wireless triggering by 2.5mm sync cord jack, featuring1/8000s high speed sync.Support TTL auto flash,multi flash, manual flash, TCM transform function,one shoot & multi-shoot setting and more | FULL GRAPHIC DISPLAY--Large dot matrix LCD screen: 16 groups and 32 channels to wirelessly control and trigger. full graphic display of 5 groups simultaneously. Support magnification | WIRELESS FLASH TRIGGER NO INTERFERENCE--01-99 wireless ID: Only achieve triggering when the channels and wireless IDs of The master and slave Unit are set to the fame, Avoiding signal interference effectively | GODOX XPRO FOR NIKON CAMERAS--Compatible with Nikon camera models including:D5 D4 D60 D70S D90 D100 D200 0300S D300 D500 D610 D7C0 D750D800 D810 D3100 D3200 D3300 D5000 D5100D5200 D5300 D7000 D7100

VERSATILE FLASH TRIGGER FOR SONY--Built-in godox 2 4g wirless x system versatile using methods -can be used as a wireless godox flash trigger/ wireless camera flash trigger/ wireless shutter release trigger | 1/8000S SYNC STUDIO FLASH TRIGGER--Godox Xpro-c supports type-C USB firmware upgrade and wireless triggering by 2.5mm sync cord jack, featuring1/8000s high speed sync.Support TTL auto flash,multi flash, manual flash, TCM transform function,one shoot & multi-shoot setting and more | FULL GRAPHIC DISPLAY--Large dot matrix LCD screen: 16 groups and 32 channels to wirelessly control and trigger. full graphic display of 5 groups simultaneously. Support magnification | WIRELESS FLASH TRIGGER NO INTERFERENCE--01-99 wireless ID: Only achieve triggering when the channels and wireless IDs of The master and slave Unit are set to the fame, Avoiding signal interference effectively | GODOX XPRO FOR SONY CAMERAS-- Compatible with Sony camera models including:a77lI a77 a99 ILCE-6000L a9 A7R A7Rlll a350 DSC-RX10. For more compatibilty issue feel free to contact us any time

➤Perfect Combination - Godox Xpro-C TTL Wireless Flash Trigger built-in Godox Wireless X System which can control camera flash,outdoor flash as well as studio flash, when combinate with Godox X1R-C Reciever, it can also control the original compatible for Canon Flashes,Featuring multi-channel triggering and stable signal transmission,perfect combination for studio flash solution. | ➤TTL Autoflash - Fully support TTL Autoflsh,1/8000s high-speed sync,Multi flash, Manual Flash, Flash Exposure Compensation, TCM Transform Function, Magnetic Function, One-Shoot & Multi- Shoot Setting, Group Modeling Lamp Control, Group Zooming, Adjusting All Groups' Output Value Simultaneously, etc | ➤Multi-Functional -Can be used as a Wireless Godox Flash Trigger / Wireless Compatible for Canon Speedlites Trigger/ Wireless Shutter Release Trigger/ Flash Trigger with 2.5mm Sync Cord Jack Support E-TTL II Autoflash and Professional Functions | ➤X1R-C Receiver - Godox 2.4G TTL Wireless Flash Trigger Remote Control Receiver Compatible for Canon with Gr group flash and wireless grouping system (32 channels & 5 groups)and triggering the flash. | ➤LCD DISPLAY - Both the Xpro-C & X1R are equipped with large LCD display,offs you convenient operation and make the work more efficient.

Built-in Godox 2.4G wireless X system & versatile using methods. | 16 groups and 32 channels to wireless control and trigger. Add 01 to 99 wireless ID settings, which can only achieve triggering when the channels and wireless IDs of the master and slave unit are set to the same, avoiding signal interference effectively. | Fully support TTL autoflash, 1/8000s high-speed sync, multi flash, manual flash, flash exposure compensation, TCM transform function, magnification function, one shoot & multi-shoot setting, group modeling lamp control, group zooming, adjusting all groups' output value simultaneously, etc. | Extra-large LCD panel, 5 group buttons and 4 function buttons offer convenient manipulation. Only weights 80g for great portability. Support Type-C USB firmware upgrade and wireless triggering by 2.5mm sync cord jack. | The flash trigger is compatible for Canon EOS series camera models: 1Dx MarkII, 1Dx, 5Ds/5Dsr, 5DIV, 5D MarkIII, 5D MarkII, 5D; 7D MarkII, 7D, 6D, 80D, 70D, 60D, 50D; 40D, 30D, 750D/760D, 700D, 650D, 600D, 550D; 500D, 450D, 400D, 400D Digital, 350D DIGITAL, 100D, 1200D, 1000D; 1100D, M5, M3.

Large Dot Matrix LCD: 16 Groups and 32 Channels to Wirelessly Control and Trigger. Full Graphic Display of 5 Groups simultaneously | Versatile Trigger: As a Wireless Godox Flash Trigger/A Wireless Speedlites Trigger/A Wireless Shutter Release Trigger/A Flash Trigger with 2.5mm Sync Cord Jack | 01-99 Wireless ID: Only Achieve Triggering when the Channels and Wireless IDs of the Master and Slave unit are Set to the Same, Avoiding Signal Interference effectively | Smart TCM Button: Long Press TCM Button can Transform the Flash Value in TTL Mode into the Power Output Value in M Mode; Short Press TCM Button Enables the Groups to be Switched Between the One-Group and Multi-Group Model | Fully Support TTL Autoflash, 1/8000s High-Speed Sync, Multi Flash, Manual Flash, Flash Exposure Compensation, TCM Transform Function, Magnfication Function, One-Shoot & Multi- Shoot Setting, Group Modeling Lamp Control, Group Zooming, Adjusting All Groups' Output Value Simultaneously, etc

16 Groups and 32 Channels, 01-99 Wireless ID setting avoid signal interference, Only achieve triggering when the groups, channels and wireless IDs of the mater and slave uint are set to the same | 5 Group Buttons and 4 Function Buttons Offer Convenient Manipulation, Multi Wireless Trigger Option for Wireless Flash Trigger/Wireless Speedlites Trigger/Wireless Shutter Release Trigger/Flash Trigger with 2.5mm Sync Cord Jack | Full Graphic Display of 5 Groups simultaneously, large Dot Matrix LCD panel display, Type-C USB port for firmware upgrade | Smart TCM function for transform the TTL shooting value tinto the output value in M mode by Long Press TCM Button, Switch between the One-Group and Multi-Group Mode by Short Press TCM Button | Fully Support TTL Autoflash, 1/8000s High-Speed Sync, Multi Flash, Manual Flash, Flash Exposure Compensation, TCM Transform Function, Memory Function, Magnfication Function, One-Shoot & Multi- Shoot Setting, Group Modeling Lamp Control, Group Zooming, Adjusting All Groups' Output Value Simultaneously, etc

➤TTL Autoflash - Godox Xpro-C Flsh Trigger Support TTL Autoflash, 1/8000s High-Speed Sync,Multi flash, Manual Flash, Flash Exposure Compensation, TCM Transform Function, Magnfication Function, One-Shoot & Multi- Shoot Setting, Group Modeling Lamp Control, Group Zooming, Adjusting All Groups' Output Value Simultaneously, etc | ➤Multi-Use - Built in 2.4G Wireless X System which allows you to easily trigger and control the flash even 100 meters away.Multi-use: As a wireless Godox Trigger for camera flash,outdoor flash and studio flash; As a Wireless Compatible for Canon Speedlites Trigger;As a Wireless Shutter release Trigger;As a flash(without Godox X system) trigger with 2.5mm Sync Cord Jack | ➤TTL-Convert-Manual Function > Long Press TCM Button can Transform the Flash Value in TTL Mode into the Power Output Value in M Mode; Short Press TCM Button Enables the Groups to be Switched Between the One-Group and Multi-Group Mode | ➤01-99 WIRELESS ID - Only Achieve Triggering when the Channels and Wireless IDs of the Master and Slave unit are Set to the Same, Avoiding Signal Interference effectively | ➤11 Customizable Functions - Large dot matrix LCD display panel,5 group buttons and 4 function buttons offer convenient manipulation,good choose for novices to practice skills.

Godox XProC TTL Wireless Flash Transmitter can not only control the flashes with built-in Godox wireless X system e.g.camera flashes, outdoor flashes and studio flashes, but also can control the Canon original flashes when using in combination with X1R-C receiver. | This flash trigger can be used on the following Canon EOS series camera models:1Dx mark II,1Dx,5Ds/5Dsr,5DIV,5D Mark III,5D Mark II,5D,7D Mark II 7D 6D 80D,70D,60D,50D,500D 450D,400D Digital,350D DIGITAL,100D,1200D,1000D,1100D,M5,M3 etc. | Smart TCM Button: Long Press TCM Button can Transform the Flash Value in TTL Mode into the Power Output Value in M Mode; Short Press TCM Button Enables the Groups to be Switched Between the One-Group and Multi-Group Mode | Fully Support TTL Autoflash, 1/8000s High-Speed Sync, Multi Flash, Manual Flash, Flash Exposure Compensation, TCM Transform Function, Magnfication Function, One-Shoot & Multi- Shoot Setting, Group Modeling Lamp Control, Group Zooming, Adjusting All Groups' Output Value Simultaneously, etc | 16 Groups and 32 Channels to Wielessly Control and Trigger.Add 01 to 99 Wireless ID settings,Which Can Only Achieve Triggring When the channels and Wireless IDs of the Master and Slave Unit are Set to the Same,Avoiding Signal interference effectively

Versatile Used Methods:As a wireless Godox Flash Trigger/ Wireless E-TTL Speedlights Trigger/Wireless Shutter Release Trigger/ Flash Trigger with 2.5mm Sync Cord Jack | Built-in Godox 2.4G Wireless X System: The Godox XPro-C uses a 2.4G Wireless X System, allowing you to easily trigger and control the flash even 100 meters away. | Pro Functions: Support TTL Autoflash, 1/8000s High-Speed Sync, Multi Flash, Manual Flash, Flash Exposure Compensation, TCM Transform Function, Magnification Function, One-Shoot & Multi-Shoot Setting, Group Modeling Lamp Control, Group Zooming, Adjusting All Groups' Output Value Simultaneously, etc | Easy Operation&Great Portability:With an extra-large LCD panel,5 group buttons, and 4 function buttons which can offer convenient manipulation. Only weights 80g of the XPRO-C is great for carrying | Suitable for Flash and camera: XPRO-C Wireless Trigger can be used to control EOS camera(1Dx Mark Ⅱ 1Dx 5Ds/5Dsr 5DⅣ 5D Mark Ⅱ 5D 7D Mark Ⅱ 7D 6D 50D 40D 30D 450D M5 M3.etc; outdoor flash, studio flashes such as TT600, TT685III, V860III, and AD100, AD200PRO,AD300PRO,AD400 Pro, AD600Pro.

🌿 |TTL Autoflash and Pro Functions|: Support TTL Autoflash, 1/8000s High-Speed Sync, Multi Flash, Manual Flash, Flash Exposure Compensation, TCM Transform Function, Magnfication Function, One-Shoot & Multi- Shoot Setting, Group Modeling Lamp Control, Group Zooming, Adjusting All Groups' Output Value Simultaneously, etc | 🌿 |SMART TCM BUTTON|: Long Press TCM Button can Transform the Flash Value in TTL Mode into the Power Output Value in M Mode; Short Press TCM Button Enables the Groups to be Switched Between the One-Group and Multi-Group Mode | 🌿 |Versatile Using Methods|: As a wireless Godox Flash Trigger/ Wireless Shutter Release Trigger/ Wireless Fuji Speedlights Trigger/ Flash Trigger with 2.5mm Sync Cord Jack | 🌿 |01-99 WIRELESS ID|: Only Achieve Triggering when the Channels and Wireless IDs of the Master and Slave unit are Set to the Same, Avoiding Signal Interference effectively | 🌿 |LARGE LCD Display|: 16 Groups and 32 Channels to Wirelessly Control and Trigger. Full Graphic Display of 5 Groups simultaneously

16 Groups and 32 Channels to Wirelessly Control and Trigger, 01-99 Wireless ID setting avoid signal interference, Only Achieve Triggering when the channels and wireless IDs of the mater and slave unit are set to the same | 5 Group Buttons and 4 Function Buttons Offer Convenient Manipulation, Multi Wireless Trigger Option for Wireless Flash Trigger/Wireless Speedlites Trigger/Wireless Shutter Release Trigger/Flash Trigger with 2.5mm Sync Cord Jack | Full Graphic Display of 5 Groups simultaneously, large Dot Matrix LCD panel display, Type-C USB port for firmware upgrade | Smart TCM function for transform the TTL shooting value tinto the output value in M mode by Long Press TCM Button, Switch between the One-Group and Multi-Group Mode by Short Press TCM Button | Fully Support TTL Autoflash, 1/8000s High-Speed Sync, Multi Flash, Manual Flash, Flash Exposure Compensation, TCM Transform Function, Memory Function, Magnfication Function, One-Shoot & Multi- Shoot Setting, Group Modeling Lamp Control, Group Zooming, Adjusting All Groups' Output Value Simultaneously, etc

Compatibility: Godox XProII-C flash trigger compatible for Canon cameras, such as 1Dx Mark II, 5D Mark III, 5D Mark II, 5D, 7D Mark II, 7D, 6D, 80D, 70D, 60D, 50D, 40D, 30D, 750D/760D, 700D, 650D, 600D, 550D, 500D, M5, M3 etc. This trigger can not only control flashes with built-in Godox wireless X system, like camera flashes, outdoor/studio flashes, but also can control original flashes by using cable that comes in the X1R-C receiver (Receiver Sold Separately). | 2.4G Wireless System: The XProII-C transmitter helps you achieve seamless control of the Godox lighting system. It features multi-channel triggering with 16 groups on one of 32 channels and can access 99 wireless ID settings, with stable signal transmission from up to 328’ away. | Built with Bluetooth Connectivity: Godox XProII implements bluetooth. The app “Godox Flash” is easy to use and connects to the trigger quite seamlessly. It allows you to control your trigger from the phone, thus controlling your lights. | Even Exposure: Grab this trigger and up your flash game! Godox trigger XProII-C fully supports both of TTL and HSS functions, which allows you to use flash at shutter speeds up to 1/8000s, and make picture is evenly exposed and you also get the best shooting effect. | Large LCD Display: Menu is easy to use, and the buttons is sturdier than the previous version. Real-time display of remote flash settings on a large LCD screen to gain professional results, your image would get the perfect exposure. The quick-release lock is updated to a quick lever, ensuring the trigger locked safe in place and will not fall off camera.

🌈【Even Exposurefor Your Pictures】 - Both TTL and HSS are offered, which allows you to use your flashat shutter speeds up to 1/8000s.Xproll helps that your entirepicture is evenly exposed and you will get the best shoot possible.More, real-time display of remote flash settings on an extra-largeLCD screen to gain professional results, your image would get theperfect exposure. | 🌈【Trigger Your Flash Remotely】 - Channel and ID allows you to remotely control and trigger theflash at any time.The flash can be triggered if both of flash andflash trigger are set to the same channel and ID. Separatechannels and IDs can effectively avoid signal interference. If anumber of flashes are used in a scene and you are searching theleast intrusive channel and ID, an applicable channel was foundfast by the scan feature to enhance your working efficiency | 🌈【Intuitive Operation】 - When you place your camera, trigger, and flash far away, try to useour APP, Godox Flash, to control remotely the output of the flash.To improve your user experience, the app Godox Flash, allows youto adjust the flash value you want.The interface of Godox Flashis clear and easy to use. Download this app simply, and you willcontrol all settings directly in the mobile interface. | 🌈【Quick-Release Lock】 - A quick-release lock was updated to a quick lever, ensuring thespeedlight locked safe in place while using on camera. When offcamera, this design helps you unlock it easily and quickly. | 🌈【Multi-Shooting】 - When you're shooting the same object with others and sharing aset of fixed lights, just try multi-shooting mode. Under multi-shooting feature, your ×prollL sends the flash value youset to the light, and the flash will operate according to your flashvalue. While enjoying the fun of photography with others, youadjust the flash to fulfill your creative ideas.

👍【Compatible with Canon Cameras】Stable signal transmission, Godox XProII-C flash trigger is compatible with Canon cameras, such as 1Dx Mark II, 5Ds/5Dsr,5D Mark III, 5D Mark II, 5D, 7D Mark II, 7D, 6D, 80D, 70D, 60D, 50D, 40D, 30D, 750D/760D, 700D, 650D, 600D, 550D, 500D,350D, M5, M3, etc. The flash transmitter can control flashes with the built-in Godox wireless X system, like camera flashes, outdoor flashes and studio flashes. | 👍【Godox Flash APP】The XproIIC trigger has newly added Bluetooth capability. When you place your camera, trigger, and flash far away, you can easily adjust the flash parameters on your cell phone or tablet without having to run back and forth between the camera and the lighting position. The Godox Flash App is designed with a clear and easy-to-use interface which will bring you unparalleled working efficiency. | 👍【 MultiFuction 】Fully Support E-TTL Auto flash , Multi Flash, Manual Flash, Flash Exposure Compensation, TCM Transform Function, Magnification Function, One-Shoot & Multi- Shoot Setting, Group Modeling Lamp Control, Group Zooming, Adjusting All Groups' Output Value Simultaneously, etc. | 👍【Built-in 2.4G Wireless System】The XProIIC helps you achieve seamless and stable control of the Godox lighting system. It features multi-channel triggering with 16 groups on one of 32 channels and can then access 99 wireless ID settings, with stable signal transmission from up to 328 FT away. | 👍【Quick-Release Lock】A quick release lock was updated to a quick lever, ensuring the speedlight locked safe in place while using on camera. When off camera, this design helps you unlock it easily and quickly. | 👍【Join Hands with Sekonic Light Meter】A collaboration has been established between XProII and Sekonic L-858 to enhance your workflow to the next level. L-858 is built-in with Godox 2.4G module, so you are able to adjust the flash parameter directly on L-858 after metering, ensuring a much more precise and convenient lighting process.

📸【Feature-rich】XproII Flash Trigger Full support for TTL automatic flash, HSS high-speed synchronization (maximum flash synchronization speed of 1/8000s), strobe and other functions, to help you take professional photos. LCD large HD display, configured with five groups of buttons and four function buttons, clear and intuitive parameter settings. | 📸【2.4GHz wireless】16 groups of 32 channels remote control and trigger, 1-99 wireless ID settings, multi-person shooting without interference. New SCAN function, can scan the idle frequency band automatically, improve the stability of the connection. | 📸【Bluetooth control】Use "Godox Flash" APP, support cell phones or tablets (Apple & Android systems are applicable) wireless remote control. Flash mode, power level, modeling lights. Buzzer and other settings can be controlled remotely. | 📸【Fast hot shoe base】Godox XPRO II-S / N / C / F / O with quick release hot shoe lock, rapid loading and unloading | 📸【One-touch switching】TCM conversion function, you can switch from TTL mode to M mode with one click, TTL output parameters automatically converted to M output settings, manual fine-tuning without repeating, improve shooting efficiency.

✅【Compatibility】Godox Xpro II C transmitter compatible for Canon camera, such as 1Dx Mark II, 5D Mark III, 5D Mark II, 5D, 7D Mark II, 7D, 6D, 80D, 70D, 60D, 50D, 40D, 30D, 750D/760D, 700D, 650D, 600D, 550D, 500D, M5, M3 etc. the flash trigger can not only control flashes with built-in Godox wireless X system, like camera flashes, outdoor/studio flashes, but also can control Canon's original flashes by use cable that comes in the X1R-C receiver(Receiver Sold Separately). | ✅【Intuitive Operation, Control Remotely】When you place your camera, trigger, and flash far away, try to use our APP, Godox Flash, to control remotely the output of the flash. To improve your user experience, the app allows you to adjust the flash value you want. The interface of APP is clear and easy to use. Download this app simply, and you will control all settings directly in the mobile interface. | ✅【Even Exposure For Your Pictures】Godox XProII C Wireless Flash Trigger fully supports both of TTL and HSS functions, which allows you to use flash at shutter speeds up to 1/8000s, and make picture is evenly exposed and you also get the best shoot possible. | ✅【Large LCD Display】New menu interface, 16 Groups and 32 Channels to Wirelessly Control and Trigger. Real-time display of remote flash settings on an extra-large LCD screen to gain professional results, your image would get the perfect exposure. | ✅【Trigger Your Flash Remotely】Channel and ID allows you to remotely control and trigger the flash at any time. The flash can be triggered if both of flash and flash trigger are set to the same channel and ID. Separate channels and IDs can effectively avoid signal interference. If a number of flashes are used in a scene and you are searching the least intrusive channel and ID, an applicable channel was found fast by the scan feature to enhance your working efficiency. | ✅【Quick-Release Lock】A quick-release lock was updated to a quick lever, ensuring the speedlight locked safe in place while using on camera. When off camera, this design helps you unlock it easily and quickly. | ✅【What's different from version 1】Improved compatibility for mirrorless cameras; Save user setting to 5 different memory slots for recall later; New individual modelling lamp control; Update firmware through USB-C on PC or Mac with Godox V3 utility; Channel scan function (scan your location for the least amount of interference); Improved TCM function (Convert TTL flash exposures to manual power settings, now with more Godox strobes supported).

💡Version Upgrade and Works Seamlessly: XProII-C is only compatible for Canon, such as 1Dx Mark II, 5D Mark III, 5D Mark II, 5D, 7D Mark II, 7D, 6D, 80D, 70D, 60D, 50D, 40D, 30D, 750D/760D, 700D, 650D, 600D, 550D, 500D, M5, M3, etc. XProII-C is designed to control lighting in flash photography, can works with godox and flashpoint lights. Control flashes with built-in Godox wireless system, like outdoor/studio flashes, camera flashes, adjust output, and trigger remotely for professional results, it also can control camera original flashes by use cable that comes in the X1R-C receiver (Sold Separately). | 💡TTL Autoflash, Professionales Function, Control Remotely: XProII-C support TTL AutoFlash, TTL Auto Flash across brands, Second-Curtain Sync Modes, 1/8000s High-Speed Sync, TCM Transform Function, Stroboscopic Flash, Single Contact Triggering etc, works well for various photography opportunities. Extra-Large LCD screen and intuitive display panel real-time display of remote flash settings to gain professional results, easy to set up and use, controls lighting gear with ease. | 💡Stable Connection and New SCAN function: 2.4GHz Godox Wireless System, flashes can be controlled by the trigger (set modes, flash strength, etc) helps you achieve seamless and stable control of the Godox lighting system. It features multiple channels triggering with 16 groups on one of 32 channels, can then access 99 wireless ID settings, with stable signal transmission from up to 328' away. SCAN function can automatic searching for the spare channels and IDs in a complex shooting environment, when the Channels and Wireless IDs of the Master and Slave unit are Set to the Same, the signal interference can effectively avoid signal interference to improve connection stability. | 💡One-Button Conversion: The two-way TCM allows for instant conversion from TTL mode to Manual mode with retained parameters and back again. Manual fine tuning without repetition, improve shooting efficiency. | 💡Godox Flash App: The XproII-C is built with Bluetooth connectivity so that the lighting parameters can be easily adjusted on your iPhone, Android smartphone, or tablet. The Goodx Flash App is designed with a clear and easy-to-use interface which will bring you unparalleled working efficiency.

We sincerely recommend this Godox new XProIIC flash trigger. You would connect Godox flash through XproIIC, adjust the output of your flash, trigger the flash remotely, and finally create your professional results. | Fully Support TTL Autoflash,Multi Flash, Manual Flash, Flash Exposure Compensation, TCM Transform Function, Magnfication Function, One-Shoot & Multi- Shoot Setting, Group Modeling Lamp Control, Group Zooming, Adjusting All Groups' Output Value Simultaneously, etc | XProII-C Trigger is an Upgraded Version of XPro Trigger: Added Bluetooth Connection Function, Using your cell phone,or tablets to connect the XProII via Bluetooth after downloading the “GodoxPhoto” APP; A Quick-Release Lock was Updated to a Quick Lever can be Quickly Locked and Unlock. | When the Xpro II-C transmitter is used with the Sekonic L-858 light meter with built-in Godox 2.4G,you are straight to adjusting the flash value through the light meter. For this feature, you can save more time photographing your fulfilled images instead of struggling with devices. | Godox XProII has a total of 16 Groups and 32 Channels, 01 to 99 Wireless ID settings,Easy wireless control and triggering. The new SCAN function allows you to quickly find the applicable channel in multiple flash scenes, improving your work efficiency

➤High-Speed Sync 1/8000s - Both TTL and HSS are offered, which allows you to use your flash at shutter speeds up to 1/8000s. XproII-C helps that your entire picture is evenly exposed and you will get the best shoot possible. More, real-time display of remote flash settings on an extra-large LCD screen to gain professional results, your image would get the perfect exposure. | ➤Trigger Your Flash Remotely Channel and ID allows you to remotely control and trigger the flash at any time. The flash can be triggered if both of flash and flash trigger are set to the same channel and ID. Separate channels and IDs can effectively avoid signal interference. If a number of flashes are used in a scene and you are searching the least intrusive channel and ID, an applicable channel was found fast by the scan feature to enhance your working efficiency | ➤Intuitive Operation When you place your camera, trigger, and flash far away, try to use our APP, Godox Flash, to control remotely the output of the flash. To improve your user experience, the app Godox Flash, allows you to adjust the flash value you want. The interface of Godox Flash is clear and easy to use. Download this app simply, and you will control all settings directly in the mobile interface. | ➤Multi-shooting When you're shooting the same object with others and sharing a set of fixed lights, just try multi-shooting mode. Under multi-shooting feature, your XproII-C sends the flash value you set to the light, and the flash will operate according to your flash value. While enjoying the fun of photography with others, you adjust the flash to fulfill your creative ideas. | ➤Godox has established a close partnership with Sekonic. When you take a picture, after metering through the Sekonic light meter L-858 with built-in Godox 2.4G module, you are able to set directly the flash value on the light meter, L-858. With Godox's strong connection to Sekonic, you are straight to adjusting the flash value through the light meter. For this feature, you can save more time photographing your fulfilled images instead of struggling with devices.

Godox XProII-C Compatible with Canon EOS series cameras (E-TTL II autoflash)：Compatible with Canon 1DxMark II、1Dx、5Ds/5Dsr、5DIV、5D Mark lll 5D Mark II、5D、7D Mark II、7D、6D、80D、70D、60D、50D、40D、30D、750D/760D、 700D、650D、600D、550D、500D、450D、400D、Digital、350D、100D、 1200D、1000D、1100D、M5、M3 | [Support TTL Autoflash] 1/8000s High-Speed Sync, Manual Flash, Flash Exposure Compensation, Flash exposure lock, Focus assist, TCM Function, Modeling Lamp Control, Zooming setting, Backlighting ON or OFF, Memory function etc. | [Extra-large LCD screen] 16 Groups and 32 Channels to Wirelessly Control and Trigger. Separate channels and IDs can effectively avoid signal interference. Real-time display of remote flash settings on an extra-large LCD screen to gain professional results. | [Multi-shooting Function] When you're shooting the same object with others and sharing a set of fixed lights, you can try multi-shooting mode. Under multi-shooting feature, your Xpro II sends the flash value you set to the light, and the flash will operate according to your flash value. While enjoying the fun of photography with others, you adjust the flash to fulfill your creative ideas. | [Work with Light meter] After metering through the Sekonic light meter L-858 with built-in Godox 2.4G module, you are able to set directly the flash value on the light meter L-858. With Godox's strong connection to Sekonic, you are straight to adjusting the flash value through the light meter. For this feature, you can save more time photographing your fulfilled images instead of struggling with devices. | Noted: The R5 camera needs to be upgraded to version 1.5 or above for TLL & HSS. The TTL mode is incompatible for canon R6 / R6 mark ii.

【Versatile Compatibility】 The Godox Xpro II-C TTL wireless flash trigger is designed for Canon EOS cameras and can control camera flash, outdoor flash, and studio flash, it also works perfectly in combination with the Godox X1R-C receiver. | 【Professional-level Functionality】This trigger offers a range of essential features including TTL autoflash, 1/8000s high-speed sync, manual flash, flash exposure compensation, TCM transform function, magnetic function, and group modeling lamp control. | 【Multiple functions】The Xpro II C can be used as a wireless flash trigger, wireless shutter release trigger, and flash trigger with 2.5mm sync cord jack support, making it a great all-in-one solution for lighting control. | 【Bluetooth Connect with APP】To provide users with a more flexible and intuitive controlling process,the XproII-C is built with Bluetooth connectivity so that the lighting parameters can be easily adjusted on your iPhone, Android smartphone, or tablet via the Godox app. | 【X1R-C Receiver】The set comes with a compatible X1R-C receiver which supports up to 1/8000s HSS function, features 32 channels, and 5 groups for wireless grouping. | 【Intuitive LCD display】Both the Xpro II C transmitter and X1R-C receiver are equipped with a large LCD display, allowing for easy and efficient operation of the lighting system.

🌈【Even Exposurefor Your Pictures】 - Both TTL and HSS are offered, which allows you to use your flashat shutter speeds up to 1/8000s.Xproll helps that your entirepicture is evenly exposed and you will get the best shoot possible.More, real-time display of remote flash settings on an extra-largeLCD screen to gain professional results, your image would get theperfect exposure. | 🌈【Trigger Your Flash Remotely】 - Channel and ID allows you to remotely control and trigger theflash at any time.The flash can be triggered if both of flash andflash trigger are set to the same channel and ID. Separatechannels and IDs can effectively avoid signal interference. If anumber of flashes are used in a scene and you are searching theleast intrusive channel and ID, an applicable channel was foundfast by the scan feature to enhance your working efficiency | 🌈【Intuitive Operation】 - When you place your camera, trigger, and flash far away, try to useour APP, Godox Flash, to control remotely the output of the flash.To improve your user experience, the app Godox Flash, allows youto adjust the flash value you want.The interface of Godox Flashis clear and easy to use. Download this app simply, and you willcontrol all settings directly in the mobile interface. | 🌈【Quick-Release Lock】 - A quick-release lock was updated to a quick lever, ensuring thespeedlight locked safe in place while using on camera. When offcamera, this design helps you unlock it easily and quickly. | 🌈【Multi-Shooting】 - When you're shooting the same object with others and sharing aset of fixed lights, just try multi-shooting mode. Under multi-shooting feature, your ×prollL sends the flash value youset to the light, and the flash will operate according to your flashvalue. While enjoying the fun of photography with others, youadjust the flash to fulfill your creative ideas.

Godox xpro ii fuji flash trigger is only suitable for Fujifilm cameras, please confirm your camera model before placing an order.compatible for Fujifilm Cameras (Autoflash)Support for the cameras that have PC sync socket) | Godox xpro ii fujifilm trigger Features TTL Autoflash and Pro Functions. Fully Support TTL Autoflash,Multi Flash, Manual Flash, Flash Exposure Compensation, TCM Transform Function, Magnfication Function, One-Shoot & Multi- Shoot Setting, Group Modeling Lamp Control, Group Zooming, Adjusting All Groups' Output Value Simultaneously, etc | godox xproii-f xpro-f ii Trigger for Fuji has Smart TCM Button. Long Press TCM Button can Transform the Flash Value in TTL Mode into the Power Output Value in M Mode; Short Press TCM Button Enables the Groups to be Switched Between the One-Group and Multi-Group Mode.This function helps you get the proper exposure value quickly and promises you an accurate and coherent expression of light. | Bluetooth Connection Function||Added Bluetooth Connection Function, Using your cell phone,or tablets to connect the XProII via Bluetooth after downloading the “GodoxPhoto” APP;The Goodx Flash App is designed with a clear and easy-to-use interface which will bring you unparalleled working efficiency. | Scanning Function|| the scanning function to automatic searching for the spare channels and IDs in a complex shooting environment, which will save you much time for preparation. | Updated Quick-Release Lock || The XproII-F employs a quick release lock design. With a simple push to place your flash trigger safe in place, this design will provide you a efficient and convenient shooting process. | Join Hands with Sekonic Light Meter ||When the Xpro II-F transmitter is used with the Sekonic L-858 light meter with built-in Godox 2.4G,you are straight to adjusting the flash value through the light meter. For this feature, you can save more time photographing your fulfilled images instead of struggling with devices. | Large LCD Display||New menu interface, 16 Groups and 32 Channels to Wirelessly Control and Trigger. Real-time display of remote flash settings on an extra-large LCD screen to gain professional results, your image would get the perfect exposure.

We sincerely recommend this Godox new XProIIF flash trigger. You would connect Godox flash through XproIIF, adjust the output of your flash, trigger the flash remotely, and finally create your professional results. | XProII-F Trigger is an Upgraded Version of XPro Trigger: Added Bluetooth Connection Function, Using your cell phone,or tablets to connect the XProII via Bluetooth after downloading the “GodoxPhoto” APP; A Quick-Release Lock was Updated to a Quick Lever can be Quickly Locked and Unlock. | When the Xpro II-F transmitter is used with the Sekonic L-858 light meter with built-in Godox 2.4G,you are straight to adjusting the flash value through the light meter. For this feature, you can save more time photographing your fulfilled images instead of struggling with devices. | Fully Support TTL Autoflash,Multi Flash, Manual Flash, Flash Exposure Compensation, TCM Transform Function, Magnfication Function, One-Shoot & Multi- Shoot Setting, Group Modeling Lamp Control, Group Zooming, Adjusting All Groups' Output Value Simultaneously, etc | Godox XProII has a total of 16 Groups and 32 Channels, 01 to 99 Wireless ID settings,Easy wireless control and triggering. The new SCAN function allows you to quickly find the applicable channel in multiple flash scenes, improving your work efficiency

➤High-Speed Sync 1/8000s - Both TTL and HSS are offered, which allows you to use your flash at shutter speeds up to 1/8000s. XproII-N helps that your entire picture is evenly exposed and you will get the best shoot possible. More, real-time display of remote flash settings on an extra-large LCD screen to gain professional results, your image would get the perfect exposure. | ➤Trigger Your Flash Remotely Channel and ID allows you to remotely control and trigger the flash at any time. The flash can be triggered if both of flash and flash trigger are set to the same channel and ID. Separate channels and IDs can effectively avoid signal interference. If a number of flashes are used in a scene and you are searching the least intrusive channel and ID, an applicable channel was found fast by the scan feature to enhance your working efficiency | ➤Intuitive Operation When you place your camera, trigger, and flash far away, try to use our APP, Godox Flash, to control remotely the output of the flash. To improve your user experience, the app Godox Flash, allows you to adjust the flash value you want. The interface of Godox Flash is clear and easy to use. Download this app simply, and you will control all settings directly in the mobile interface. | ➤Multi-shooting When you're shooting the same object with others and sharing a set of fixed lights, just try multi-shooting mode. Under multi-shooting feature, your XproII-N sends the flash value you set to the light, and the flash will operate according to your flash value. While enjoying the fun of photography with others, you adjust the flash to fulfill your creative ideas. | ➤Godox has established a close partnership with Sekonic. When you take a picture, after metering through the Sekonic light meter L-858 with built-in Godox 2.4G module, you are able to set directly the flash value on the light meter, L-858. With Godox's strong connection to Sekonic, you are straight to adjusting the flash value through the light meter. For this feature, you can save more time photographing your fulfilled images instead of struggling with devices.

Compatible for FUJI Camera: Stable signal transmission, this flash trigger compatible for FUJIFILM cameras, such as X-Pro2, X-S10, X-T2, GFX50S, X-Pro2, X-T1, X-T3, X-T30, X-H2s, X-T4, GFX50R, X-Pro1, X-T10, X-E1, X-A3; X100F, X100T; the flash trigger can control flashes with the built-in Godox wireless X system, like camera flashes, outdoor flashes and studio flashes | Intuitive Operation, Control Remotely: When you place your camera, trigger, and flash far away, try to use our APP, Godox Flash, to control remotely the output of the flash. To improve your user experience, the app allows you to adjust the flash value you want. The interface of APP is clear and easy to use, download this app simply, and you will control all settings directly in the mobile interface | Even Exposure: Godox XProII F wireless trigger fully supports both of TTL and HSS functions, which allows you to use flash at shutter speeds up to 1/8000s,The flash trigger helps that your entire picture is evenly exposed. More, The two-way TCM allows for instant conversion from TTL mode to manual mode with retained parameters and back again, this helps you get the proper exposure value quickly and ensure every fire with an accurate and coherent expression of light | Large LCD Display: Exceptional design, easy operation and great portability, 16 Groups and 32 channels to wirelessly control and trigger. Real-time display of remote flash settings on an extra-large LCD screen, your image would get the perfect exposure; achieve seamless and stable control of the Godox lighting system | Quick Release Lock: A quick release lock was updated to a quick lever, ensuring the speedlight locked safe in place while using on camera. When off camera, this design helps you unlock it easily and quickly; When off camera, this design helps you unlock it easily and quickly | What's Different From Version XPro: Improved compatibility for cameras; save user setting to 5 different memory slots for recall later; New individual modelling lamp control; Update firmware through USB-C on PC or Mac with Godox V3 utility; Channel scan function(scan your location for the least amount of interference); Improved TCM function, now with more godox strobes supported

🌈【Even Exposurefor Your Pictures】 - Both TTL and HSS are offered, which allows you to use your flashat shutter speeds up to 1/8000s.Xproll helps that your entirepicture is evenly exposed and you will get the best shoot possible.More, real-time display of remote flash settings on an extra-largeLCD screen to gain professional results, your image would get theperfect exposure. | 🌈【Trigger Your Flash Remotely】 - Channel and ID allows you to remotely control and trigger theflash at any time.The flash can be triggered if both of flash andflash trigger are set to the same channel and ID. Separatechannels and IDs can effectively avoid signal interference. If anumber of flashes are used in a scene and you are searching theleast intrusive channel and ID, an applicable channel was foundfast by the scan feature to enhance your working efficiency | 🌈【Intuitive Operation】 - When you place your camera, trigger, and flash far away, try to useour APP, Godox Flash, to control remotely the output of the flash.To improve your user experience, the app Godox Flash, allows youto adjust the flash value you want.The interface of Godox Flashis clear and easy to use. Download this app simply, and you willcontrol all settings directly in the mobile interface. | 🌈【Quick-Release Lock】 - A quick-release lock was updated to a quick lever, ensuring thespeedlight locked safe in place while using on camera. When offcamera, this design helps you unlock it easily and quickly. | 🌈【Multi-Shooting】 - When you're shooting the same object with others and sharing aset of fixed lights, just try multi-shooting mode. Under multi-shooting feature, your ×prollL sends the flash value youset to the light, and the flash will operate according to your flashvalue. While enjoying the fun of photography with others, youadjust the flash to fulfill your creative ideas.

⚡【More Efficient, More Professional】Inheriting all the professional functions of the Godox flash triggers, the XProII supports TTL auto flash across brands, stroboscopic flash, second-curtain sync modes, and allows for high-speed sync with shutter speeds up to 1/8000s. | ⚡【Stable and Seamless Connection】Built-in 2.4GHz Godox wireless X system, the XProII N helps you achieve stable control of the Godox lighting system. It features multi-channel triggering with 16 groups on one of 32 channels and can then access 99 wireless ID settings, with stable signal transmission from up to 328’ away. | ⚡【Godox Flash App】 The Goodx Flash App is designed with a clear and easy-to-use interface which will bring you unparalleled working efficiency. | ⚡【Quick-Release Lock】The XproII - S/N/C/F/O employs a quick-release lock design. With a simple push to place your flash trigger safely in place, this design will provide you with an efficient and convenient shooting process. | ⚡【TCM function & Optional Single Contact Triggering】The two-way TCM allows for instant conversion from TTL mode to Manual mode with retained parameters and back again, this function helps you get the proper exposure value quickly. XProII-N TTL wireless flash trigger also provides an optional single contact function, featuring more speedy and sensitive triggering.