【360 Degrees Touch】: This USB fingerprint reader supports 360 degrees fingerprint reading. 10 fingerprints can be set for each user account and can set fingerprints for multiple accounts. | 【Auto Improvement】: Automatically improve the fingerprint information after each successful recognition, adapt to the subtle changes of fingerprint, constantly improve the identification rate, more sensitive. | 【Fast Matching】: This hello fingerprint reader identifies the fingerprint within 0.5 second, provides faster and safer login. | 【For Win System】: This USB fingerprint sensor is suitable for Win 10, for Win 11, 32/64 bits. | 【Small Size】: This USB fingerprint reader adopts zinc alloy material, small in size and light in weight, easy to use.

Sharing: Connecting to the local area network through RJ45 network cable, multiple computers in the local area network can share a USB printer or all in one machine (only supports printing function). | USB2.0 Transmission: Server conforms to the USB2.0 transmission standard (compatible with USB1.1), provides an adaptive Ethernet interface, supports multiple protocols and multiple operating systems. | Universal Compatibility: Using the RJ45 port, the connector can be used with any LAN only device, such as smart TVs, printers, game consoles, cameras, laptops, etc. No drivers required to set up. | High Integrated Chip: The Print server uses a high integrated chip with low power consumption, which can greatly save energy and reduce costs compared with traditional printers. The server allows you to print from any computer on the network. | Web Management Function: The built in web management function of the Print server provides more convenience by allowing users to configure, monitor and even reset the print server through a browser.

This product is of high quality and 100% . | high quality material, soft and wear-resistant, and for use. | a 12-inch/30cm 2.5mm plug to male flash PC sync cord and used for the wired connection of camera PC port and off-machine flash in a short distance. | chractorized by lightweight and small size so quite easy to carry and store, which can add no burden to your outdoor use. | Professional flash PC sync cord, this product is the for you. | | | | |

: With the device, it is convenient for you to keep the camera during installation. | Viewfinder Protecting: Viewfinder eyecup can protect the optical viewfinder from being scratched and wear, suitable for long term use. | Less Bad Effect: Prevent stray light, dirt, moisture, dust, and unwanted light, reduce the factors which will influence you. | Extend Service Life: Cold shoe cover can be used to protect the top flash connection contacts from corrosion, extend service life. | Specially Designed: Specifically designed for Sony A6000 A6100 A6300 A5000 camera, for a easy replacement and protection.

Precise cut, perfect fitness, suitable for Sony PS2 IDE original network adapter. | Equipped with mounting screw pack, which makes it easy to install and detach. | A large‑capacity for sata hard disk is used to replace the IDE hard disk to play the game, which will save us a lot of game loading time. | High‑quality for PCB board material, with fast operation speed and excellent performance. | Small and lightweight, convenient for us to storage and a good replcement accessory.

Compatible for most cameras with tapered thread interface. | It is suitable for Leica, for Fujifilm X100 X100S X10 X20 X-E1 XT10 XT20 XE2S X100F, for Nikon and more. | Aluminum alloy construction delivers resistance and excellent stability. | 4Pcs come in package with different color, meeting your different use needs. | Easy to install with high precision screw interface, also good decoration for your camera.

Adopt high-quality flexible wire core as guide line, high elastic metal contact sheet as switch, without deformation, precision metal plug, closely connected shutter line interface. | Shutter release line is 90cm length, lightweight, good stability, easy to carry. Recommended for night/product/advertising/stage shooting, commercial photography, etc. | Using thick high-grade earphone wire, soft feeling, anti-pull and wear-resistant, strong temperature adaptability. No block feeling after opening wire coiling, good elasticity. | The key adopts double layer design, the micro-convex structure is easier to press, the forward sliding and push-pull is easy to be in place, strong springback and the positioning is accurate. | Key components, internal use of metal reed contacts, minimal contact resistance, high conductivity and wear resistance. Plugs all use metal copper needles as connectors, long service life.

High Quality Material: The connecting part of the hood and the lens is a metal ring, and the rubber material is sturdy and durable, and can be used for a long time. | Anti Astigmatism: The camera hood can prevent surrounding scattered light from entering the lens when shooting in backlight, side light or flash photography. | Prevent Damage: It can also prevent fingers from accidentally touching the surface of the lens, and can also shield the lens from wind, sand, rain and snow to a certain extent. | Adjustable: There are three different adjustable states, which can be used for telephoto lens, standard lens and wide angle lens according to the needs of the lens, and it is easy to carry. | Scope of Application: Three purpose lens hood screw connection method, suitable for lenses with corresponding apertures of various brands.

High Quality Material: The connecting part of the hood and the lens is a metal ring, and the rubber material is sturdy and durable, and can be used for a long time. | Anti Astigmatism: The camera hood can prevent surrounding scattered light from entering the lens when shooting in backlight, side light or flash photography. | Prevent Damage: It can also prevent fingers from accidentally touching the surface of the lens, and can also shield the lens from wind, sand, rain and snow to a certain extent. | Adjustable: There are three different adjustable states, which can be used for telephoto lens, standard lens and wide angle lens according to the needs of the lens, and it is easy to carry. | Scope of Application: Three purpose lens hood screw connection method, suitable for lenses with corresponding apertures of various brands.

High Quality Material: The connecting part of the hood and the lens is a metal ring, and the rubber material is sturdy and durable, and can be used for a long time. | Anti Astigmatism: The camera hood can prevent surrounding scattered light from entering the lens when shooting in backlight, side light or flash photography. | Prevent Damage: It can also prevent fingers from accidentally touching the surface of the lens, and can also shield the lens from wind, sand, rain and snow to a certain extent. | Adjustable: There are three different adjustable states, which can be used for telephoto lens, standard lens and wide angle lens according to the needs of the lens, and it is easy to carry. | Scope of Application: Three purpose lens hood screw connection method, suitable for lenses with corresponding apertures of various brands.

HIGH PERFORMANCE: Bluetooth clicker is compact, large capacity, low power consumption, long battery life, charging 2H, continuous working 48H. | BLUETOOTH 5.3: Bluetooth remote control page turner adopts Bluetooth 5.3, which is easy to use, easy to match and stable operation. | EASY PAGE TURNER: Cell phone camera shutter remote can easily turn the page remotely, one key remote control, enjoy the comfort. | ERGONOMIC DESIGN: Smart finger remote is suitable for different width fingers, charging port facing outward, indicator light to the right. | REMOTE CONTROL: Smart finger remote can be remotely controlled by 10m, easy to point and click over the air, more fun to play with your phone.