A octopus table-top tripod perfect for a number of applications. | The leg is flexible and easy to adjust the shape and place. The other advantange is to be used for photo accessory combo. It's suitable for Camera,Speedlight,Lens and other accessories of Canon,Nikon,Sony,Pentax,Olympus,for Panasonic,Gopro etc. | Fits in your pocket and sets up in seconds to provide a stable shooting platform that can be used virtually anywhere, indoors or outdoor. | It is portability that your camera can be used anywhere and everywhere, saving you more energy while taking it out. | Allowing it to level out a camera on the most uneven surface

Material: Made of aluminum (camera body mount) anodized black | Solid metal mount lens adapter allows Konica AR Mount lens is used on Sony NEX-3 NEX-5 camera body. | There is no ROM connection on the ring so diaphragm control of the lens is set manually. | Allows focus to infinity.Supports AV / M mode. | With lock pin and stop screw.

Solid metal mount lens adapter allows M42 Mount lens is used on Sony NEX-3 NEX-5 camera body. | There is no ROM connection on the ring so diaphragm control of the lens is set manually | Allows focus to infinity. Supports AV / M mode | With lock pin and stop screw. | Compatable: LENS: M42 Mount. Camera: NEX-VG10E NEX-7 NEX-7K NEX6NEX-5 NEX-5C NEX-5N NEX-5A NEX-5K NEX-5R NEX-5L NEX-F3 NEX-3 NEX-C3 NEX-3NL NEX-C3 E mount camera. Camcorder: SONY NEX-VG10

The tripod mount ring mount on the tripod, it helps you fix and balance your tele lens which is heavy or long lens hanging off the front of camera. | 100% fits Sigma and does have same construction. | Made by metal with very high quality | The UNC (Unified National Coarse Thread) is 1/4" | Suitable For: SIGMA APO 70-200mm F2.8 II EX DG MACRO HSM

Hersmay A7IV Cage retains access to the controls and the hot shoe of the camera. The cage is made of a high-quality aluminum alloy and is a solid piece of metal that is very resistant to oxidation and will stand the test of time. | The cage features an anti-twist design with the 1/4 "-20 camera mounting screw to keep your camera from moving in the cage. This cage also features an anti-twist design with padding on the base to help the camera from scratching. | In addition to a cold shoe holder and several 1/4 "-20 and 3/8" -16 threaded holes, this form-fitting aluminum cage has several ARRl-style brackets to prevent the accessories from twisting when they are mounted on the cage. | Light design with only 230g. Strap holes are included to add a wrist strap or collar, sold separately, to your rig. In addition, the supplied Allen key with built-in magnetic suction device is ready for use without fear of loss. | Top handle: The Top handle is designed for hand-held shots and can easily hold the weight of a large cage rig with various attachments. Integrated with 4 cold shoes, this grip provides filmmakers with all the mounting options they need to build a custom video rig, such as: B. for microphone, LED lights, monitor brackets, EVF brackets.

This electronic lens adapter is specially designed for existing 4/3 four thirds lens to Olympus Pen/Panasonic Lumix micro 4/3 cameras. With electronic pins, it permits auto focusing. Compatible with original Olympus MMF-1. | Material: bronze made bayonet mount & plastic body | Electronic auto focus, Focus infinitely | High-technics treatment on the contact pins,permitting perfect signal transmitting between lens and camera | Compatable:Olympus PEN E series camera, e.g. E-P1, E-PL1,E-PL3,E-PL5 etc; Panasonic Lumix G series camera, e.g. G1, G2, GF1,GF5 etc. All Olympus / Panasonic Four Thirds system lenses

Made of metal | Color: Blue | 2pcs hard stops fixation scew + 1pcs scale pillar | Suitable for fotga DP500III follow focus, for SmallRig Mini Follow Focus

It features an Arca-Swiss base plate to attach your lens to a ball head, clamp or panoramic head according to Arca-Swiss standard, as well as 3/8″-16 and 1/4″-20 holes on the bottom for mounting on a tripod, light stand, etc. | This tripod mounting ring helps you fix and balance your heavy or long telephoto lens hanging from the front of the camera. | Suitable for Sony FE 10-18 mm F4 OSS,FE 12-24 mm F4 G, FE 16-35 mm F4 ZA OSS,FE 16-35 mm F2.8 GM,FE 16-70 mm F4 ZA OSS,FE 18-105 mm F4 G OSS PZ, FE 18-135 mm mm F3.5 mm -5.6 OSS,FE 24mm F1.4 GM,FE 24-70mm F4 ZA OSS,FE 24-70mm F2.8 GM,FE 24-105mm F4 G OSS,FE 24-240mm F3.5-6.3 OSS,FE 28-70mm F3.5-5-5.6 OSS,FE 35mm F1.4 ZA,FE 50mm F1.4 ZA,FE 50mm F2.8 Macro,FE 85mm F1.4 GM,FE 85mm F1.8,FE 90mm F2.8 Macro G OSS,FE 100mm F2.8 STF GM OSS,FE 12-2 4mm F2.8 GM, E 16-55 mm F2.8 G, E 70-350 mm F4.5-6.3 G OSS,FE 135 mm F1.8 GM, etc. | Compatible with Tamron 17-28 mm F2.8 Di III RXD A046 (E-mount), for Tamron 28-75 mm F2.8 Di III RXD A036 (E-mount), for Tamron 70-180 mm F2.8 Di III VXD A056 (E-mount), for Tamron 17-7 0 F2. 8 Di III-A VC RXD B070 (E connection), for Tamron 28-200 mm F2.8-5.6 Di III RXD A071 (E connection), for Tamron 70-300 mm F4.5-6.3 Di III RXD A047 (E connection). Made of aluminum alloy, ring diameter:61mm, weight:153g | Package Includes: 1 x Lens Tripod Mounting Ring

Specially desgined For NIKKOR Z 180-600mm f/5.6-6.3 VR lens | Reserves multiple 1/4"-20 & 3/8" -16 threaded screw holes on the base for direct attachment of lenses to tripod. | It features an Arca-compatible dovetail plate that allows you to attach your lens to ball head, clamps or panoramic head of the Arca-Swiss standard. | The metal tripod mount ring on the tripod helps you repair and balance your telephoto lens, which is heavy or long lens hanging from the front of the camera. | Made of aviation aluminium alloy and CNC precision machining, anodised surface treatment, right weight and strong building.

Replacement for CANON AC Adapter/Battery Charger (100% Compatible) | .Input: AC 100V-240V 50-60HZ 30VA(100V)-40VA(240V) | Output: DC 7.4V 2A | Model: ACK-E10 | Package: 1x DR-E10 DC Coupler; 1x LP-E10 Dummy Battery ; 1x US Plug Powe Cable

Model: ACK-E17 | Adapter Type: AC Power Supply Adapter | Replacement for Canon AC Adapter (100% Compatible) | Input Voltage: 100V-240VAC (50-60Hz) | Output Voltage: 7.4Volts DC | Package: 1x DR-E17 DC Coupler; 1x LP-E17 Dummy Battery ; 1x US Plug Powe Cable

Model: AC-PW20 Adapter Type: AC Power Adapter | Replacement for SONY AC Adapter AC-PW20 | Input Voltage: 100V-240VAC (50-60Hz) Output Voltage: 7.6Volts DC Amperage: 2A | Suitable for: Sony Alpha A7 A7R A7S II A6000 A6100 A6300 A6400 A6500 NEX-3 Series,Sony NEX-C3 Series,Sony Alpha DSLR SLT Series,DSC-RX10 II III IV | Package including: 1 x AC Adapter,1 x DC coupler ,1 x Power Cable with US Plug

D-tap power adapter cable specially designed for Panasonic S5 S5II S5K S5C GH6 GH5II DSLR cameras. | Full decoded, support to display the battery status. | Required input: 12V-16.8V,output:8V/3A. | Length:35cm-100cm/13.7in-39.3in. | Package includes: 1 x DMW-BLK22 dummy battery

Up/down ward angle of 0-45-60-75-90 degree. | This mini flash is compact, portable. With 2.5mm PC sync port. | Flash index of GN20m, illuminating angle of Horizontal 60°, Vertical 40°. | Adjustable lamp holder is filmed in color and black-and-white photos of the ideal light source and can be used as the auxiliary light photo shoot. | Compatible with various digital camera and traditional camera. Except for Minolta and for Sony anti-intercalation shoe.

Applicable battery:V Mount Battery,Suitable for Sony NP-F series battery monitors, LED lights, video transmission, Z CAM E2/S6/F6/F8 cameras, better external power supply, increase the camera's battery life | D-tap Input and output 14.8V,same as V mount battery | NP-F Output:7.4V 3A

For mouting Canon EOS EF/EF-S lens onto Canon EOS M EF-M mirrorless camera body, such as M1 M2 M3 M5 M6 M10 M50 M100 M200, M50 Mark II, M6 Mark II | With electronic pins, it permits auto focus. And it focus infinitely. | High precision, permitting perfect signal transmitting between lens and camera. | Material: metal bayont &plastic body. The lens adapter is designed with a 1/4' tripod hole. So with a compatible adapter, camera and lens set can be mounted onto tripod. | Rear and front caps for protecting both threads from damage & scratches.

Specially designed for Canon DSLR EOS M50II M50 M5 cameras.Protect and stabilize the camera. | Made of aluminum,CNC precision machining.Durable,easy to use. | Plenty of 1/4"-20 and 3/8"-16 threaded holes for attaching more accessories.2 locating holes for arri standard and 2 cold shoe mount. | Bottom part fits to arca swiss standard,you can mount it on a tripod ballhead with arca siwss standard. | No affect on operating the camera buttons,providing different DIY possibilities for the camera accessories attaching.

Hersmay R6II Cage retains access to the controls and the hot shoe of the camera. The cage is made of a high-quality aluminum alloy and is a solid piece of metal that is very resistant to oxidation and will stand the test of time. | The cage features an anti-twist design with the 1/4 "-20 camera mounting screw to keep your camera from moving in the cage. This cage also features an anti-twist design with padding on the base to help the camera from scratching. | In addition to a cold shoe holder and several 1/4 "-20 and 3/8" -16 threaded holes, this form-fitting aluminum cage has several ARRl-style brackets to prevent the accessories from twisting when they are mounted on the cage. | Light design with only 220g. Strap holes are included to add a wrist strap or collar, sold separately, to your rig. In addition, the supplied Allen key with built-in magnetic suction device is ready for use without fear of loss. | Top handle: The Top handle is designed for hand-held shots and can easily hold the weight of a large cage rig with various attachments. Integrated with 4 cold shoes, this grip provides filmmakers with all the mounting options they need to build a custom video rig, such as: B. for microphone, LED lights, monitor brackets, EVF brackets.

Vertical Power Battery Grip for Canon EOS R8, EOS-RP DSLR Camera, Battery Holder for 2x LP-E17 Battery | Can hold one or two LP-E17 Li-ion batteries - effectively doubles the recording capacity and extends the recording time. (Battery not included) It can be used as an additional power source for the camera. | There is power on/off swithch. | With a 1/4 inch screw hole in the bottom, it can easily be attached to the tripod.

Solid full metal mount lens adapter allows Canon FD Mount Lens to fit on Canon EOSR mount series Full Frame Mirrorless Camera body. | Supports AV / M mode. There is no electronic element in the adapter, aperture and focusing must be manually control. | Although the lens will fit physically, automatic diaphragm, auto-focusing, or any other functions will not operate correctly while using this adapter. | Material: Aluminium and brass. Precise fit and solid connection - lens has no play, gap or wiggling when mounted on adapter and no adjustments are required to fit your lens. | Designed to reach infinity focus while maintaining the correct registration distance required to support CRC lenses or lenses with floating elements.

The Hersmay metal cage is specially designed for Canon EOS M5 M50 M50 Mark II cameras. | Multiple 1/4" and 3/8" screw holes, ARRL localisation and a cold shoe mount, suit for microphone, LED lights and mounting camera monitor mount. | Delicate structure allows full access to all buttons and controls on camera, battery compartment, SD card/HDMI slot. You can install or replace the battery without removing the cage. | The bottom of the cage has non-slip pads and an anti-sagging design to protect the camera from scratches and movements. | The top handle is designed for handheld shooting, can hold the weight of a large cage rig with various attachments with ease. The camera grip with numerous 1/4" and 3/8" mounting points and ARRl standard positioning hole for accessory attachment, the built-in 15mm rod clamp allows you to connect a microphone holder, EVF mount etc.

This aluminum alloy cage is designed for the FUJIFILM X-S20 camera with multiple 1/4" & 3/8" screw holes and a cold shoe mount.It protecting your camera while attaching more accessories to your camera. | Allows full access to all buttons and controls on camera, battery compartment,SD card/HDMI slot. you can install or replace the battery without taking off the cage. | Multiple accessories mounting points: Multiple 1/4" & 3/8" screw holes,ARRl locating hole and a cold shoe mount for microphone,LED lights and the monitor bracket mounting and more R7 camera accessories. | Arca-Swiss Standard Design:Bottom with quick release plate for Arca-Swiss standard clamp.lt allows quick switch between camera tripod and handheld stabilizer(compatible with DJI RS 2/RSC 2/RS 3/RS 3 PRO Gimbal). | Anti-slip Feature:The bottom of the cage has anti-slip pads and anti-deflection design to protect the camera from scratching and movement. | The universal top handle is designed for handheld shooting, can hold the weight of a large cage rig with various attachments with ease. The camera grip with numerous 1/4" and 3/8" mounting points and ARRl standard positioning hole for accessory attachment, the built-in 15mm rod clamp allows you to connect a microphone holder, EVF mount etc.

Adapter Type: Power Supply / Charger | Replacement for Canon power supply / charger (100% compatible) | Input voltage: 100V-240VAC (50-60Hz) | Output voltage: 8.1 V DC | Package: 1x DR-E6 DC Coupler; 1x LP-E6 Dummy Battery ; 1x US Plug Powe Cable

Replacement for Nikon HB-39 Lens hood,Same as original specs and standard | Prevent unwanted stray light from entering the lens | Non-glare matte finish on the interior further preventing lens flare | Extra protection from accidental impact | Compatible With: Nikon AF-S 16-85mm f3.5-5.6 G ED 18-300mm f/3.5-6.3

Delay / self-timer (delay): just like the self-timer on your camera. With the TM timer remote switch, you can set any delay (in 1 second increments) up to 99 hours, 59 minutes and 59 seconds. | BULB/Long Exposure (LONG): With this function, you can take long exposures of up to 100 hours in length. | Interval timer (INTVL): the interval timer can also be set to any time span of up to 100 hours. If you use it e.g. B. set to 10 minutes, a shot is taken every 10 minutes until either the film ends or the exposure limit is reached. | Number of exposures (N) : This setting allows you to set the number of shots to be taken, up to a total of 399. | For Canon EOS 2000D 1300D 70D 77D 80D 90D EOS R R6 Mark II R6 R7 R8 R10 RP R100 M5 M6 Mark II Rebel T7 T6 T5 T8i T7i T6i T6s T5i T4i SL3 SL2 SL1

Delay / self-timer (delay): just like the self-timer on your camera. With the TM timer remote switch, you can set any delay (in 1 second increments) up to 99 hours, 59 minutes and 59 seconds. | BULB/Long Exposure (LONG): With this function, you can take long exposures of up to 100 hours in length. | Interval timer (INTVL): the interval timer can also be set to any time span of up to 100 hours. If you use it e.g. B. set to 10 minutes, a shot is taken every 10 minutes until either the film ends or the exposure limit is reached. | Number of exposures (N) : This setting allows you to set the number of shots to be taken, up to a total of 399. | For Canon EOS R5, 6DII, 5D IV III II, 5DS 5DR, 7D II, 1D X II, 1D, 1DS II, III, Mark III, IV/1DC 1DX D60 5D 7D Series

This adapter ring allows you to use the Minolta MD/MC lens on the Nikon SLR / DSLR cameras body, it's saving you the expense of a costly and irreversible conversion. The inside glass design using coated optical glass offer better optical performance | The lens distance scale can be used as well as the focusing to infinity and the adapter has correction lens inside | Precise fit and solid connection - lens has no play, gap or wiggling when mounted on adapter and no adjustments are required to fit your lens | Designed to reach infinity focus with glass while maintaining the correct registration distance required to support CRC lenses or lenses with floating elements | Compatible with: Minolta MD Lens, for Nikon Camera

Baseplate stand is specially desgined for Nikon NIKKOR Z 400mm f4.5 /NIKKOR Z 600mm f6.3 /NIKKOR Z 800mm f6.3 VR S | With AS standard interface, compatible with all Acra-Swiss Style quick release platforms. | Hard anodized for better protection from outside environment. | Reserved 1/4inch and 3/8inch screw holes at the bottom.

Solid full metal mount lens adapter allows Leica R Mount Lens to fit on Canon EOSR mount series full frame mirrorless camera body. | Supports AV / M mode. There is no electronic element in the adapter, aperture and focusing must be manually control. | Although the lens will fit physically, automatic diaphragm, auto-focusing, or any other functions will not operate correctly while using this adapter. | Precise fit and solid connection - lens has no play, gap or wiggling when mounted on adapter and no adjustments are required to fit your lens. | Designed to reach infinity focus while maintaining the correct registration distance required to support CRC lenses or lenses with floating elements.

Solid full metal mount lens adapter allows Minolta MD/MC mount lens to fit on Canon EOSR mount series full frame mirrorless camera body. | Supports AV / M mode. There is no electronic element in the adapter, aperture and focusing must be manually control. | Although the lens will fit physically, automatic diaphragm, auto-focusing, or any other functions will not operate correctly while using this adapter. | Precise fit and solid connection - lens has no play, gap or wiggling when mounted on adapter and no adjustments are required to fit your lens. | Designed to reach infinity focus while maintaining the correct registration distance required to support CRC lenses or lenses with floating elements.

【Lightweight & Durable】Specially carbon fiber designed for DSLR and mirrorless camera,lightweight,durable and easy to install and storage | 【Wide Compability】You can clip it on the front of your lens through the adapter ring in the package.Included adapter rings are 67mm/72mm/77mm/82mm.You can also purchase 52mm/55mm/58mm/62mm adapter ring separately. | 【Suit for Multi Sizes Lens Fitlers】Comaptible with 4x4"/4x5.65"/100mmx100mm lens filter.Also supports working with circular lens filter 52mm/55mm/58mm/62mm/67mm/72mm/77mm/82mm,67mm/72mm/77mm/82mm are included in the package,others can be purchased separately. | 【Multiple Connectors for Different Accessories】 two 1/4"-20 holes,one 3/8"-16 screw holes,two cold shoe. | 【Must Have For Your Camera System】Made of high quality and durable material with carbon fiber top flag,protect the matte box from dropping.Lightweight and durable,net weight is 135g.

Made of strong anti-magnetic stainless steel, durable,anti-corrosion | Compatible with lenses with thread diameters ranging from 22mm to 105mm, meeting the needs of most lens sizes. | Camera lens repair tools can be used to repair and restore the edge of lenses, threads or dented lenses, providing good using experience. | The pointed tip is designed to fit notched lens retaining rings, while the flat tip smoothly engages slotted surfaces, providing versatile functionality for different tasks. These tips can be securely fixed with the included L shaped hex key. The widened bracket allows for separate use as a screwdriver for precise screw control | With its compact size, the lens vise can be effortlessly carried in a backpack, ensuring convenience and portability wherever you go.

Supports AV / M mode. There is no electronic element in the adapter, aperture and focusing must be manually control. | Although the lens will fit physically, automatic diaphragm, auto-focusing, or any other functions will not operate correctly while using this adapter. | Precise fit and solid connection - lens has no play, gap or wiggling when mounted on adapter and no adjustments are required to fit your lens. | Designed to reach infinity focus while maintaining the correct registration distance required to support CRC lenses or lenses with floating elements. | Fit For Canon EOS R R5 R6 RP Full Frame Mirrorless Camera

Infrared filters, sometimes called IR filters or heat-absorbing filters, are designed to allow IR mid-infrared wavelengths while block visible light. They are often used in devices with bright incandescent light bulbs (such as slide and overhead projectors) to prevent unwanted heating | There are also filters which are used in solid state (CCD or CMOS) video cameras to allow IR due to the high sensitivity of many camera sensors to near-infrared light. These filters typically have a blue hue to them as they also sometimes block some of the light from the shorter visible light and UV wavelengths | Digital cameras are usually equipped with IR-blocking filters to prevent unnatural-looking images. IR-transmitting (passing) filters, or removal of factory IR-blocking filters, are commonly used in infrared photography to pass infrared light and block visible and ultraviolet light. Such filters appear black to the eye, but are transparent when viewed with an IR sensitive device | The creative adjustable IR filter is a compact all-in-one variable wavelengths filter that adjusts the amount of wavelengths with just the twist of your wrist. The index marks on the filter let you know exactly the amount of wavelengths at a glance. Giving you clear and precise shots at whichever wavelengths you are using. It offers you the freedom to create different wavelengths freely | You don't have to carry a bunch of filters for shooting. Just one filter, gives you from the range 530nm to 750nm freely

Infrared filters, sometimes called IR filters or heat-absorbing filters, are designed to allow IR mid-infrared wavelengths while block visible light. They are often used in devices with bright incandescent light bulbs (such as slide and overhead projectors) to prevent unwanted heating | There are also filters which are used in solid state (CCD or CMOS) video cameras to allow IR due to the high sensitivity of many camera sensors to near-infrared light. These filters typically have a blue hue to them as they also sometimes block some of the light from the shorter visible light and UV wavelengths | Digital cameras are usually equipped with IR-blocking filters to prevent unnatural-looking images. IR-transmitting (passing) filters, or removal of factory IR-blocking filters, are commonly used in infrared photography to pass infrared light and block visible and ultraviolet light. Such filters appear black to the eye, but are transparent when viewed with an IR sensitive device | The creative adjustable IR filter is a compact all-in-one variable wavelengths filter that adjusts the amount of wavelengths with just the twist of your wrist. The index marks on the filter let you know exactly the amount of wavelengths at a glance. Giving you clear and precise shots at whichever wavelengths you are using. It offers you the freedom to create different wavelengths freely | You don't have to carry a bunch of filters for shooting. Just one filter, gives you from the range 530nm to 750nm freely

Infrared filters, sometimes called IR filters or heat-absorbing filters, are designed to allow IR mid-infrared wavelengths while block visible light. They are often used in devices with bright incandescent light bulbs (such as slide and overhead projectors) to prevent unwanted heating | There are also filters which are used in solid state (CCD or CMOS) video cameras to allow IR due to the high sensitivity of many camera sensors to near-infrared light. These filters typically have a blue hue to them as they also sometimes block some of the light from the shorter visible light and UV wavelengths | Digital cameras are usually equipped with IR-blocking filters to prevent unnatural-looking images. IR-transmitting (passing) filters, or removal of factory IR-blocking filters, are commonly used in infrared photography to pass infrared light and block visible and ultraviolet light. Such filters appear black to the eye, but are transparent when viewed with an IR sensitive device | The creative adjustable IR filter is a compact all-in-one variable wavelengths filter that adjusts the amount of wavelengths with just the twist of your wrist. The index marks on the filter let you know exactly the amount of wavelengths at a glance. Giving you clear and precise shots at whichever wavelengths you are using. It offers you the freedom to create different wavelengths freely | You don't have to carry a bunch of filters for shooting. Just one filter, gives you from the range 530nm to 750nm freely

Infrared filters, sometimes called IR filters or heat-absorbing filters, are designed to allow IR mid-infrared wavelengths while block visible light. They are often used in devices with bright incandescent light bulbs (such as slide and overhead projectors) to prevent unwanted heating | There are also filters which are used in solid state (CCD or CMOS) video cameras to allow IR due to the high sensitivity of many camera sensors to near-infrared light. These filters typically have a blue hue to them as they also sometimes block some of the light from the shorter visible light and UV wavelengths | Digital cameras are usually equipped with IR-blocking filters to prevent unnatural-looking images. IR-transmitting (passing) filters, or removal of factory IR-blocking filters, are commonly used in infrared photography to pass infrared light and block visible and ultraviolet light. Such filters appear black to the eye, but are transparent when viewed with an IR sensitive device | The creative adjustable IR filter is a compact all-in-one variable wavelengths filter that adjusts the amount of wavelengths with just the twist of your wrist. The index marks on the filter let you know exactly the amount of wavelengths at a glance. Giving you clear and precise shots at whichever wavelengths you are using. It offers you the freedom to create different wavelengths freely | You don't have to carry a bunch of filters for shooting. Just one filter, gives you from the range 530nm to 750nm freely

The T Mount adapter allows you to attach your Fujifilm X Mount camera to lenses, telescopes, microscopes, enlargers, and bellows attachments that have a T2 universal thread mount. This adapter will work with any Fujifilm X Mount camera body. | It allows to keep the infinity focus. Allows focus to infinity. Full manual operation, manual focus and manual iris adjustment. | Auto focus (AF) is not available. Anodized | Compatible Cameras (Including, but not limited to): X-A1/X-A2/X-A3/X-A5/X-H1/X-E1/X-E2/X-E3/X-A10/X-A20/X-E2S/X-M1/X-T1/X-T2/X-T10/X-T20/X-Pro1/X-Pro2 etc.

It features Arca-compatible dovetail which allow you attach your lens to Ball Head, Clamp or Panorama Head of Arca-Swiss standard | Reserved 1/4" and 3/8" screw holes at the bottom for attach lens to tripod directly. | The tripod ring is made of Aviation Aluminum, CNC precisely machined, hollow-out weight reduction design, polished and surface anodized finish. | Compatible for Canon RF 70-200mm F2.8L is USM lens | Package Includes: 1 * Lens Tripod Collar

It features Arca-compatible dovetail plate which allow you attach your lens to Ball Head, Clamp or Panorama Head of Arca-Swiss standard. | Reserved multiple 1/4"-20 & 3/8"-16 thread screw holes at the bottom for attach lens to tripod directly. | Made of aviation aluminum alloy and CNC precision machining, anodizing surface treatment, right weight and strong building. | The tripod mount ring mount on the tripod, it helps you fix and balance your tele lens which is heavy or long lens hanging off the front of camera. | Specially designed for Canon RF 100-400mm f/5.6-8 IS USM Lens